HMC310MS8G

v01.0401 MICROWAVE CORPORATION HMC310MS8G BLUETOOTH & 2.4 GHz WLAN GaAs MMIC TRANSCEIVER Features Tx Gain: 15 dB, Rx Gain: 13 dB Tx 1 dB Compression Point: 5 dBm Rx Noise Figure: 3 dB @ 2.4 GHz Single Positive Supply: +3V No External Matching Required 8 AMPLIFIERS - SMT Typical Applications Transmit & Receive Switch for 2.4 GHz Applications: • Bluetooth • HomeRF • WLAN Radios Functional Diagram General Description The HMC310MS8G is a multifunction RFIC that incorporates a power amplifier (PA) and low noise amplifier (LNA) with a transmit/receive switch. The RFIC offers 15 dB gain and +5 dBm P1dB in the transmit mode and 13 dB of gain with an overall noise figure of 3 dB when in receive mode. Transmit and receive performance levels have been selected to meet the BLUETOOTH Class 2 & 3 requirements when used in conjunction with 2.4 GHz ASICs such as National Semiconductor’s LMX3162. This low current and low cost transceiver requires no external circuitry to operate the amplifier power down features, and is available in the industry standard MSOP8G package, which is 0.118” x 0.190” (3.0mm x 4.9mm). Electrical Specifications, TA = +25° C, Vdd = +3V Receive Mode Parameter Min. Frequency Range Gain Gain Variation over Temperature Noise Figure Input Return Loss Output Return Loss Output Power for 1 dB Compression (P1dB) Saturated Output Power (Psat) Output Third Order Intercept (IP3) Supply Current (Idd) 4 9 -7 -5 3 8 Rx Typ. 2.4 - 2.5 13 0.03 3.0 6 12 -4 0 6 12 15 0.04 4.0 4 10 1 3 3 7 13 5 7 10 24 12 Max. Min. Tx Typ. 2.4 - 2.5 15 0.03 17 0.04 Max. GHz dB dB/°C dB dB dB dBm dBm dBm mA Transmit Mode Units 8 - 56 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v01.0401 MICROWAVE CORPORATION HMC310MS8G BLUETOOTH & 2.4 GHz WLAN GaAs MMIC TRANSCEIVER Rx Gain 20 18 16 Rx Noise Figure 5 4.5 4 8 AMPLIFIERS - SMT 8 - 57 12 10 8 6 4 2 0 2 2.2 2.4 2.6 2.8 3 FREQUENCY (GHz) +25C +85C -40C Noise Figure (dB) 14 3.5 3 2.5 2 +25C Gain (dB) 1.5 1 0.5 0 2 2.2 2.4 2.6 2.8 3 FREQUENCY (GHz) +85C -40C Rx Return Loss 0 Rx 1dB Compression Point 0 -1 -2 -5 Return Loss (dB) -3 P1dB (dBm) -4 -5 -6 -7 +25C +85C -40C -10 -15 Input Return Loss Output Return Loss -8 -9 -10 2.6 2.8 3 2 2.2 2.4 2.6 2.8 -20 2 2.2 2.4 FREQUENCY (GHz) 3 FREQUENCY (GHz) Rx Output Third Order Intercept Point 10 9 8 7 IP3 (dBm) 6 5 4 3 2 1 0 2 2.2 2.4 2.6 2.8 3 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v01.0401 MICROWAVE CORPORATION HMC310MS8G BLUETOOTH & 2.4 GHz WLAN GaAs MMIC TRANSCEIVER GaAs MMIC SUB-HARMONICALLY PUMPED MIXER 17 - 25 GHz 8 AMPLIFIERS - SMT Tx Gain 20 18 16 Tx Return Loss 0 -5 12 10 8 6 4 2 0 2 2.2 2.4 2.6 2.8 3 FREQUENCY (GHz) -20 2 2.2 2.4 2.6 2.8 3 FREQUENCY (GHz) +25C +85C -40C Return Loss (dB) 14 Gain (dB) -10 -15 Input Return Loss Output Return Loss Tx 1dB Compression Point 10 9 8 7 +25C +85C -40C Tx Output Third Order Intercept Point 15 14 13 12 P1dB (dBm) 6 5 4 3 2 1 0 2 2.2 2.4 2.6 2.8 3 FREQUENCY (GHz) IP3 (dBm) 11 10 9 8 7 6 5 2 2.2 2.4 2.6 2.8 3 FREQUENCY (GHz) 8 - 58 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v01.0401 MICROWAVE CORPORATION HMC310MS8G BLUETOOTH & 2.4 GHz WLAN GaAs MMIC TRANSCEIVER Absolute Maximum Ratings Drain Bias Voltage (Vdd) Control Voltage Range (Vctl) RF Input Power (Vdd = +3.0 Vdc) Channel Temperature Continuous Pdiss (T = 85 °C) (derate 5 mW/°C above 85 °C) Thermal Resistance (channel to ground paddle) Storage Temperature Operating Temperature +7.0 Vdc -0.2 to Vdd 0 dBm 150 °C 0.325 W Truth Table Tx Section Active Rx Section Active VCTL = Vdd VCTL = 0V 8 AMPLIFIERS - SMT 200 °C/W -65 to +150 °C -40 to +85 °C Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEADFRAME MATERIAL: COPPER ALLOY 3. LEADFRAME PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 8 - 59 MICROWAVE CORPORATION v01.0401 HMC310MS8G BLUETOOTH & 2.4 GHz WLAN GaAs MMIC TRANSCEIVER 8 AMPLIFIERS - SMT Evaluation PCB Note: DC blocking capacitors on the Tx and ANT ports are required to evaluate this part. These capacitors may not be required in the final circuit design if interfacing components are DC blocked. List of Material Item J1, J2, J3 J4, J5 C1 C2, C3 U1 PCB* Description PC Mount SMA Connector DC Pins .01 µF Capacitor, 0603 Pkg. 100 pF Capaciotor, 0603 Pkg. HMC310MS8G Transceiver Evaluation Board 1.5” x 1.55” The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. *Circuit Board Material: Roger 4350 8 - 60 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.0401 HMC310MS8G BLUETOOTH & 2.4 GHz WLAN GaAs MMIC TRANSCEIVER Notes: 8 AMPLIFIERS - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 8 - 61