HMC332_10

HMC332 / 332E v01.0705 Typical Applications • MMDS • PCMCIA The HMC332 / HMC332E is ideal for: • WirelessLAN 9 MIXERS - SGL-BAL - SMT • WCDMA micro-BTS Functional Diagram ED U IN NT T O SC DUC DI RO P Features Integrated LO Amplifier w/ Pdiss: < 20 mW Conversion Loss / Noise Figure: 8 dB Low LO Drive Level: 0 dBm Input IP3: +10 dBm Single Positive Supply: 3V to 5V GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz w r Ne o ed f d men General Description om Rec The HMC332 & HMC332E are single balanced mixer Not ICs with integrated LO amplifiers. This converter IC can operate as an upconverter or downconverter between 2.0 GHz and 2.8 GHz. With the integrated LO amplifier, the mixer requires an LO drive level of only 0 dBm, and requires only 6 mA from a single positive +3V rail. The mixer has 8 dB of conversion loss, an input P1dB of 0 dBm, and an input third order intercept point of +10 dBm. s sign De Electrical Specifi cations, TA = +25° C Parameter Min. Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation RF to IF Isolation IP3 (Input) 1 dB Compression (Input) Supply Current (Idd) * Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz. 11 2 11 4 -4 IF = 100 MHz LO = 0 dBm & Vdd = +3V Typ. 2.0 - 2.8 DC - 1.0 8 8 20 5 17 10 0 6 10 10 Max. GHz GHz dB dB dB dB dB dBm dBm mA Units 9-1 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC332 / 332E v01.0705 Conversion Gain vs. Temperature @ LO = 0 dBm 0 -5 -10 -15 -20 1.4 1.8 2.2 2.6 3 3.4 -30 1.4 1.8 2.2 2.6 3 3.4 FREQUENCY (GHz) FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 -6 dBm -4 dBm -2 dBm 0 dBm +2 dBm +4 dBm Return Loss @ LO = 0 dBm 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 RF LO -5 -10 -15 -20 1.4 -30 1.8 2.2 2.6 3 3.4 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) FREQUENCY (GHz) Conversion Gain vs. Vdd @ LO = 0 dBm 0 IF Bandwidth @ LO = 0 dBm 0 CONVERSION GAIN (dB) -5 RESPONSE (dB) -5 -10 -10 -15 +2.7V +3.0V +3.3V -15 CONVERSION GAIN RETURN LOSS -20 1.4 -20 1.8 2.2 2.6 3 3.4 0 0.3 0.5 0.8 1 1.3 1.5 FREQUENCY (GHz) FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9-2 MIXERS - SGL-BAL - SMT ED U IN NT T O SC DUC DI RO P Isolation @ LO = 0 dBm 0 -5 LO/IF GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz CONVERSION GAIN (dB) ISOLATION (dB) -10 -15 -20 -25 RF/IF +25 C -40 C +85 C w r Ne o ed f d men om Rec Not LO/RF s sign De 9 CONVERSION GAIN (dB) HMC332 / 332E v01.0705 Upconverter Performance Conversion Gain @ LO = 0 dBm 0 -5 -10 9 MIXERS - SGL-BAL - SMT -15 -20 1.7 1.9 ED U IN NT T O SC DUC DI RO P Input P1dB vs. Temperature @ LO = 0 dBm 10 6 P1dB (dBm) 2 2.1 2.3 2.5 2.7 FREQUENCY (GHz) GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz CONVERSION GAIN (dB) w r Ne o ed f d men om Rec Not -6 -10 2.9 3.1 3.3 2 2.2 20 -2 s sign De +25 C -40 C +85 C 2.5 2.7 3 FREQUENCY (GHz) Input IP3 vs. LO Drive* 20 Input IP3 vs. Temperature @ LO = 0 dBm* 15 IP3 (dBm) IP3 (dBm) 15 10 10 5 -2 dBm 0 dBm +2 dBm 5 +25 C -40 C +85 C 0 2 2.2 2.5 FREQUENCY (GHz) 2.7 3 0 1.9 2.1 2.3 2.5 2.7 2.9 FREQUENCY (GHz) Input IP3 vs. Vdd @ LO = 0 dBm* 20 Input P1dB vs. Vdd @ LO = 0 dBm 10 15 P1dB (dBm) IP3 (dBm) 6 2 10 -2 +2.7V +3.0V +3.3V 5 +2.7V +3.0V +3.3V -6 0 1.9 -10 2.1 2.3 2.5 2.7 2.9 2 2.2 2.5 FREQUENCY (GHz) 2.7 3 FREQUENCY (GHz) * Two-tone input power= -10 dBm each tone, 1 MHz spacing. 9-3 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC332 / 332E v01.0705 MxN Spurious @ IF Port mRF 0 1 2 3 4 0 1 2 xx 12 41 >74 >74 RF = 2.5 GHz @ -10 dBm LO = 2.4 GHz @ 0 dBm All values in dBc below IF power level. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9-4 MIXERS - SGL-BAL - SMT ED U IN NT T O SC DUC DI RO P Harmonics of LO LO Freq. (GHz) 2 1 nLO nLO Spur @ RF Port 2 3 3 4 -11 0 8 8 43 48 24 6 7 9 19 31 34 32 50 71 2.2 2.4 20 20 19 14 11 18 35 39 45 67 64 >74 2.6 13 >74 >74 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz 4 32 44 43 40 38 39 D New r d fo e end m com e ot R N 67 2.8 3 18 15 s sign e 22 18 21 24 9 LO = 0 dBm All values in dBc below input LO level @ RF port. HMC332 / 332E v01.0705 Absolute Maximum Ratings RF / IF Input (Vdd = +3V) LO Drive (Vdd = +3V) Vdd Continuous Pdiss (Ta = 85 °C) (derate 2.64 mW/°C above 85 °C) 9 MIXERS - SGL-BAL - SMT IF DC Current Storage Temperature Operating Temperature ED U IN NT T O SC DUC DI RO P +13 dBm +13 dBm 5.5V 238 mW ±3 mA GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing w r Ne o ed f d men om Rec Not -65 to +150 °C -40 to +85 °C s sign De NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC332 HMC332E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H332 XXXX 332E XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 9-5 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC332 / 332E v01.0705 Pin Descriptions Pin Number 1 2, 5 3 IF 4 RF This pin is AC coupled and matched to 50 Ohm from 2.0 - 2.8 GHz. 6 LO This pin is AC coupled and matched to 50 Ohm from 2.0 - 2.8 GHz. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9-6 MIXERS - SGL-BAL - SMT ED U IN NT T O SC DUC DI RO P Function Description Vdd Power supply for the LO Amplifier. Two external RF bypass capacitors (10 pF & 10,000 pF) and an external inductor 4.7 nH) are required. GND This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value have been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/ sink more than 3mA of current or die non-function and possible die failure will result. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz Interface Schematic w r Ne o ed f d men om Rec Not Ground: Pin must connect to RF ground. s sign De 9 HMC332 / 332E v01.0705 Application Circuit 9 MIXERS - SGL-BAL - SMT ED U IN NT T O SC DUC DI RO P w r Ne o ed f d men om Rec Not s sign De GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz 9-7 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC332 / 332E v01.0705 Evaluation PCB List of Materials for Evaluation PCB 105099 [1] Item J1 - J4 C1 C2 L1 U1 PCB [2] Description PCB Mount SMA RF Connector 10 pF Capacitor, 0603 Pkg. 0.01 μF Capacitor, 0603 Pkg. 4.7 nH Inductor, 0805 Pkg. HMC332 / HMC332E Mixer 103927 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9-8 MIXERS - SGL-BAL - SMT ED U IN NT T O SC DUC DI RO P w r Ne o ed f d men om Rec Not s sign De GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz 9