HMC347C8_08

HMC347C8 v01.0404 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 8 GHz Features Isolation: 50 dB @ 2.5 GHz 36 dB @ 8 GHz Insertion Loss: 2 dB Typical Non-Reflective Design Surface Mount Ceramic Package Typical Applications The HMC347C8 is ideal for: • Telecom Infrastructure • Microwave Radio & VSAT • Military Radios, Radar & ECM • Test Instrumentation 10 SWITCHES - SMT Functional Diagram General Description The HMC347C8 is a broadband high isolation nonreflective GaAs MESFET SPDT switch in a nonhermetic surface mount ceramic package. Covering DC to 8 GHz, the switch features >50 dB isolation up to 2 GHz and >35 dB isolation up to 8 GHz. The switch operates using complementary negative control voltage logic lines of -5/0V and requires no bias supply. This SPDT is an excellent replacement for the HMC132C8 SPDT. Electrical Specifi cations, TA = +25° C, With 0/-5V Control, 50 Ohm System Parameter Insertion Loss Frequency DC - 2.0 GHz DC - 6.0 GHz DC - 8.0 GHz DC - 2.0 GHz DC - 6.0 GHz DC - 8.0 GHz “On State” DC - 2.0 GHz DC - 6.0 GHz DC - 8.0 GHz DC - 2.0 GHz DC - 6.0 GHz DC - 8.0 GHz 0.5 - 8.0 GHz 0.5 - 8.0 GHz 19 38 49 35 32 10 7 6 Min. Typ. 1.7 2.0 2.4 54 40 36 13 10 9 9 6 6 23 43 Max. 2.0 2.4 2.8 Units dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm Isolation Return Loss Return Loss RF1, RF2 Input Power for 1 dB Compression “Off State” Input Third Order Intercept (Two-Tone Input Power= +7 dBm Each Tone, 1 MHz Tone Separation) Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) DC - 8.0 GHz 3 6 ns ns 10 - 214 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC347C8 v01.0404 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 8 GHz Insertion Loss 0 Isolation 0 -10 -1 INSERTION LOSS (dB) ISOLATION (dB) -20 -30 -40 -50 -4 + 25C + 85C - 40C RF1 RF2 -2 -3 -60 -70 -5 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) 0 1 2 3 4 5 FREQUENCY (GHz) 6 7 8 10 SWITCHES - SMT 10 - 215 Return Loss 0 0.1 and 1 dB Input Compression Point 30 1 dB Compression Point 0.1 dB Compression Point RETURN LOSS (dB) -10 INPUT P1dB (dBm) 8 -5 25 20 -15 RFC RF1, RF2 ON RF1, RF2 OFF 15 -20 0 1 2 3 4 5 6 7 FREQUENCY (GHz) 10 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) Input Third Order Intercept Point 50 45 INPUT IP3 (dBm) 40 35 +25C +85C -40C 30 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC347C8 v01.0404 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 8 GHz Absolute Maximum Ratings RF Input Power (Vctl = -5V) Control Voltage Range (A & B) Channel Temperature Thermal Resistance (Insertion Loss Path) Thermal Resistance (Terminated Path) Storage Temperature Operating Temperature ESD Sensitivity (HBM) +27 dBm +0.5V to -7.5 Vdc 150 °C 440 °C/W 540 °C/W -65 to +150 °C -55 to +85 °C Class 1A Control Voltages State Low High Bias Condition 0 to -0.2V @ 10 uA Max. -5V @ 10 uA Typ. to -7V @ 40 uA Typ. (± 0.5 Vdc) Truth Table Control Input A High Low B Low High Signal Path State RFC to RF1 On Off RFC to RF2 Off On 10 SWITCHES - SMT Caution: Do not “Hot Switch” power levels greater than +13 dBm (Vctl = 0/-5 Vdc). ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: WHITE ALUMINA 92% 2. LEAD, PACKAGE BOTTOM MATERIAL: COPPER 3. PLATING: ELECTROLYTIC GOLD 100-200 MICROINCHES, OVER ELECTROLYTIC NICKEL 100-250 MICROINCHES. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. PACKAGE LENGTH AND WIDTH DIMENSIONS DO NOT INCLUDE LID SEAL PROTRUSION .005 PER SIDE. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 10 - 216 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC347C8 v01.0404 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 8 GHz Suggested Driver Circuit 10 SWITCHES - SMT 10 - 217 Pin Descriptions Pin Number 1, 4, 7 Function RFC, RF1, RF2 Description This pin is DC coupled and matched to 50 Ohm. Blocking capacitors are required if RF line potential is not equal to 0V. Package bottom must also be connected to PCB RF ground. Interface Schematic 2, 3, 8 GND 5 CTLA See truth table and control voltage table. 6 CTLB See truth table and control voltage table. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC347C8 v01.0404 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 8 GHz Evaluation PCB 10 SWITCHES - SMT List of Materials for Evaluation PCB 107261 [1] Item J1 - J3 J4 - J6 U1 PCB [2] Description PCB Mount SMA RF Connector DC Pin HMC347C8 SPDT Switch 102088 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. 10 - 218 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC347C8 v01.0404 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 8 GHz Notes: 10 SWITCHES - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 219