HMC350MS8_10

HMC350MS8 / 350MS8E v03.0308 Typical Applications • Cellular Basestations The HMC350MS8 / HMC350MS8E is ideal for: 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT • Cable Modems • Fixed Wireless Access Systems Functional Diagram ED U IN NT T O SC DUC DI RO P Features Conversion Loss: 8 dB Input IP3: +27 dBm Input IP2: +45 dBm Input P1dB: +17 dBm GaAs MMIC HIGH IP3 SINGLEBALANCED MIXER, 0.6 - 1.2 GHz w r Ne o ed f d men General Description om Rec The HMC350MS8 & HMC350MS8E are miniature Not single balanced mixers in 8 lead plastic surface mount packages. The passive GaAs schottky diode mixer implements planar on chip baluns and requires no external components. The mixer can be used as an upconverter, down converter, or modulator. The mixer provides 7.5 dB conversion loss and +25 dBm IIP3 with LO drive levels of +19 dBm at mid-band. The design was optimized for low cost high volume applications where high converter linearity is required. s sign De Electrical Specifi cations, TA = +25° C LO = +19 dBm, IF = 100 MHz Parameter Min. Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation RF to IF Isolation IP3 (Input) IP2 (Input) 1 dB Compression (Input) 19 5 14 23 33 14 Typ. 0.6 - 1.2 DC - 0.3 8 8 22 8 18 27 45 17 12 12 19 5 15 23 38 14 Max. Min. Typ. 0.8 - 1.0 DC - 0.3 7.5 7.5 22 8 20 27 45 17 10 10 Max. GHz GHz dB dB dB dB dB dBm dBm dBm Units *Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz. 10 - 1 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC350MS8 / 350MS8E v03.0308 Conversion Gain vs. Temperature @ LO = +19 dBm 0 -5 -10 -15 +25C -40C +85C -40 -50 RF/IF LO/RF LO/IF -20 0.5 0.7 0.9 1.1 1.3 1.5 -60 0.5 0.7 0.9 1.1 1.3 1.5 FREQUENCY (GHz) FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 +11 dBm +13 dBm +15 dBm +17 dBm +19 dBm +21 dBm Return Loss @ LO = +19 dBm 0 -10 RETURN LOSS (dB) -5 -5 -10 -15 -15 RF LO -20 0.5 0.7 0.9 1.1 1.3 1.5 -20 0.5 0.7 0.9 1.1 1.3 1.5 FREQUENCY (GHz) FREQUENCY (GHz) IF Bandwidth @ LO = +19 dBm 0 RETURN LOSS CONVERSION GAIN Upconverter Performance, Conversion Gain @ LO = +19 dBm 0 -5 RESPONSE (dB) CONVERSION GAIN (dB) -5 -10 -10 -15 -15 -20 0 0.2 0.4 0.6 0.8 1 IF FREQUENCY (GHz) -20 0.5 0.7 0.9 1.1 1.3 1.5 FREQUENCY (GHz) F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 MIXERS - SINGLE & DOUBLE BALANCED - SMT ED U IN NT T O SC DUC DI RO P Isolation @ LO = +19 dBm 0 -10 -20 -30 ISOLATION (dB) GaAs MMIC HIGH IP3 SINGLEBALANCED MIXER, 0.6 - 1.2 GHz CONVERSION GAIN (dB) D New r d fo e end m com e ot R N s sign e 10 CONVERSION GAIN (dB) HMC350MS8 / 350MS8E v03.0308 Input IP3 vs. LO Drive * 34 32 IP3 (dBm) IP2 (dBm) 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT 30 28 26 24 22 0.6 0.7 ED U IN NT T O SC DUC DI RO P Input IP2 vs. LO Drive * 70 65 60 55 50 45 40 35 LO = +17 dBm LO = +19 dBm LO = +21 dBm LO = + 17dBm LO = + 19dBm LO = + 21dBm GaAs MMIC HIGH IP3 SINGLEBALANCED MIXER, 0.6 - 1.2 GHz 0.8 0.9 1 1.1 LO FREQUENCY (GHz) w r Ne o ed f d men om Rec Not 1.2 1.3 1.4 30 0.6 0.8 26 s sign De 1 1.2 1.4 FREQUENCY (GHz) Input IP3 vs. Temperature * @ LO Drive = +19 dBm 34 32 30 IP3 (dBm) 28 26 24 22 0.6 -40C +25C +85C P1dB vs. Temperature @ LO = +19 dBm 24 22 20 18 16 14 0.7 +25 C -40 C +85 C 0.8 1 FREQUENCY (GHz) 1.2 1.4 P1dB (dBm) 0.8 0.9 1 1.1 1.2 FREQUENCY (GHz) * Two-tone input power = 0 dBm each tone, 1 MHz spacing. 10 - 3 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC350MS8 / 350MS8E v03.0308 MxN Spurious Outputs mRF 0 1 2 3 4 0 1 xx 14 58 87 >94 >94 >94 >92 76 1.2 26 28 22 26 52 57 59 63 RF = 1.0 GHz @ -10 dBm LO = 0.9 GHz @ +19 dBm All values in dBc relative to the IF output power level. 1.35 LO = +19 dBm Values in dBc below input LO level measured at the RF port. Absolute Maximum Ratings RF / IF Input LO Drive Storage Temperature Operating Temperature IF DC Current ESD Sensitivity (HBM) +27 dBm +27 dBm -65 to +150 °C -40 to +85 °C ±18 mA Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 4 MIXERS - SINGLE & DOUBLE BALANCED - SMT ED U IN NT T O SC DUC DI RO P Harmonics of LO LO Frequency (GHz) 0.6 1 nLO 2 nLO Spur at RF Port 2 3 3 4 -28 0 -3 6 1 28 24 15 63 37 38 51 29 0.75 0.9 59 63 82 71 85 85 GaAs MMIC HIGH IP3 SINGLEBALANCED MIXER, 0.6 - 1.2 GHz 4 43 46 46 52 D New r d fo e end m com e ot R N 77 1.05 23 22 s sign e 16 18 60 48 20 48 10 HMC350MS8 / 350MS8E v03.0308 Outline Drawing 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT ED U IN NT T O SC DUC DI RO P w r Ne o ed f d men om Rec Not NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] GaAs MMIC HIGH IP3 SINGLEBALANCED MIXER, 0.6 - 1.2 GHz s sign De 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC350MS8 HMC350MS8E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H350 XXXX H350 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 10 - 5 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC350MS8 / 350MS8E v03.0308 Evaluation PCB List of Materials for Evaluation PCB 101830 [1] Item J1, J2, J3 U1 PCB [2] Description PCB Mount SMA RF Connector HMC350MS8 / HMC350MS8E Mixer 101828 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board as shown is available from Hittite upon request. F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 6 MIXERS - SINGLE & DOUBLE BALANCED - SMT ED U IN NT T O SC DUC DI RO P D New r d fo e end m com e ot R N s sign e GaAs MMIC HIGH IP3 SINGLEBALANCED MIXER, 0.6 - 1.2 GHz 10