HMC351S8

HMC351S8 / 351S8E v03.0705 GaAs MMIC HIGH IP3 DOUBLEBALANCED MIXER, 0.7 - 1.2 GHz Typical Applications The HMC351S8 / HMC351S8E is ideal for: • Cellular Basestations Features Conversion Loss: 9.0 dB LO/IF Isolation: 35 dB LO/RF Isolation: 42 dB Input IP3: +25 dBm Input IP2: +48 dBm 7 MIXERS - SMT • Cable Modems • Fixed Wireless Access Systems Functional Diagram General Description The HMC351S8 & HMC351S8E are double balanced mixers in 8 lead plastic surface mount packages. The passive GaAs schottky diode mixer implements planar on chip baluns and requires no external components. The mixer can be used as an upconverter, down converter, or modulator. The mixer provides 9 dB conversion loss and +25 dBm IIP3 with LO drive levels of +19 dBm. The design was optimized for low cost high volume applications where high converter linearity is required. The high LO suppression of 42 dB yields excellent carrier suppression for modulator applications. Electrical Specifications, TA = +25° C LO = +19 dBm, IF = 100 MHz Parameter Min. Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation RF to IF Isolation IP3 (Input) IP2 (Input) 1 dB Compression (Input) 36 31 9 22 40 12 Typ. 0.7 - 1.2 DC - 0.3 9 9 42 35 13 25 48 16 11.5 11.5 Max. GHz GHz dB dB dB dB dB dBm dBm dBm Units *Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz. 7 - 226 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC351S8 / 351S8E v03.0705 GaAs MMIC HIGH IP3 DOUBLEBALANCED MIXER, 0.7 - 1.2 GHz Conversion Gain vs. Temperature @ LO = +19 dBm 0 Isolation @ LO = +19 dBm 0 -10 CONVERSION GAIN (dB) -5 ISOLATION (dB) -20 -30 -40 -50 -60 0.6 RF/IF LO/RF LO/IF 7 MIXERS - SMT 7 - 227 -10 -15 +25 C -40 C +85 C -20 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 FREQUENCY (GHz) FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 Return Loss @ LO = +19 dBm 0 CONVERSION GAIN (dB) -5 RETURN LOSS (dB) -5 -10 -10 -15 -15 LO = +17 dBm LO = +19 dBm LO = +21 dBm LO = +22 dBm -20 RF LO -20 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 -25 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 FREQUENCY (GHz) FREQUENCY (GHz) IF Bandwidth @ LO = +19 dBm 0 Upconverter Performance, Conversion Gain @ LO = +19 dBm 0 -5 RESPONSE (dB) CONVERSION GAIN (dB) CONVERSION GAIN RETURN LOSS -5 -10 -10 -15 -15 -20 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 IF FREQUENCY (GHz) -20 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC351S8 / 351S8E v03.0705 GaAs MMIC HIGH IP3 DOUBLEBALANCED MIXER, 0.7 - 1.2 GHz Input IP3 vs. LO Drive * 35 Input IP2 vs. LO Drive * 60 55 50 30 IP3 (dBm) IP2 (dBm) 7 MIXERS - SMT 25 45 40 20 LO = +17 dBm LO = +19 dBm LO = +21 dBm 15 35 30 0.7 LO = +17 dBm LO = +19 dBm LO = +21 dBm 10 0.7 0.8 0.9 1 1.1 1.2 0.8 0.9 1 1.1 1.2 FREQUENCY (GHz) FREQUENCY (GHz) Input IP3 vs. Temperature * @ LO Drive = +19 dBm 35 P1dB vs. Temperature @ LO = +19 dBm 20 19 30 18 17 IP3 (dBm) 25 P1dB (dBm) 16 15 14 13 +25 C -40 C +85 C 20 +25 C -40 C +85 C 15 12 11 1.1 1.2 10 0.7 0.8 0.9 10 0.7 0.8 0.9 1 1 1.1 1.2 FREQUENCY (GHz) FREQUENCY (GHz) MxN Spurious Outputs nLO mRF 0 1 2 3 4 0 xx 4 69 83 >96 1 -2 0 68 93 >96 2 21 19 84 93 >96 3 19 39 76 86 >96 4 40 53 84 89 87 Harmonics of LO nLO Spur at RF Port LO Frequency (GHz) 0.6 0.75 0.9 1.05 1.2 1.35 1 37 39 40 45 49 37 2 42 50 51 59 70 72 3 65 63 59 55 53 63 4 78 83 69 70 79 73 RF = 1.0 GHz @ -10 dBm LO = 0.9 GHz @ +19 dBm All values in dBc relative to the IF output power level. LO = +19 dBm Values in dBc below input LO level measured at the RF port. * Two-tone input power = 0 dBm each tone, 1 MHz spacing. 7 - 228 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC351S8 / 351S8E v03.0705 GaAs MMIC HIGH IP3 DOUBLEBALANCED MIXER, 0.7 - 1.2 GHz Absolute Maximum Ratings RF / IF Input LO Drive Storage Temperature Operating Temperature IF DC Current ESD Sensitivity (HBM) +27 dBm +27 dBm -65 to +150 °C -40 to +85 °C ±26 mA Class 1A 7 MIXERS - SMT NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing Package Information Part Number HMC351S8 HMC351S8E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] HMC351 XXXX HMC351 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 229 HMC351S8 / 351S8E v03.0705 GaAs MMIC HIGH IP3 DOUBLEBALANCED MIXER, 0.7 - 1.2 GHz Evaluation PCB 7 MIXERS - SMT List of Materials for Evaluation PCB 104348 [1] Item J1 - J3 U1 PCB [2] Description PCB Mount SMA RF Connector HMC351S8 / HMC351S8E Mixer 104346 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board as shown is available from Hittite upon request. 7 - 230 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC351S8 / 351S8E v03.0705 GaAs MMIC HIGH IP3 DOUBLEBALANCED MIXER, 0.7 - 1.2 GHz Notes: 7 MIXERS - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 231