HMC353MS8

v00.0901 MICROWAVE CORPORATION HMC353MS8 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Features Integrated LO Amplifier w/ Pdiss: < 20 mW Conversion Loss / Noise Figure: 8.0 dB Low LO Drive Level: 0 dBm Input IP3: >+16 dBm Single Positive Supply: 3V to 5V Typical Applications The HMC353MS8 is ideal for: • BTS Infrastructure Functional Diagram General Description The HMC353MS8 is a single balanced mixer IC with an integrated LO amplifier. This converter can operate as an upconverter and downconverter between 0.8 GHz and 1.2 GHz. With the integrated LO amplifier, the mixer requires an LO drive level of only 0 dBm, and requires only 6 mA from a single positive +3V rail. The mixer has 8 dB of conversion loss, an input P1dB of +7 dBm and an input third order intercept point of +16 dBm at 1 GHz. 5 MIXERS - SMT Electrical Specifications, TA = +25° C Parameter Min. Frequency Range, RF & LO Frequency Range, I F Conversion Loss Noise Figure (SSB) LO to RF I s olation LO to I F I s olation RF to IF Isolation I P 3 (Input) 1 dB Compression (I n put) Supply Current (I d d) 9 4 10 10 -2 I F = 100 MHz LO= 0 dBm & Vdd= 3V Typ. 0.8 - 1.2 DC - 0.5 8 8 20 - 25 10 17 16 5 6 11 11 Units Max. GHz GHz dB dB dB dB dB dBm dBm mA * Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz. 5 - 278 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at sales@hittite.com v00.0901 MICROWAVE CORPORATION HMC353MS8 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Conversion Gain vs. Temperature @ LO = 0 dBm 0 +25 C -40 C +85 C Isolation @ LO = 0 dBm 0 -5 RF/IF LO/RF LO/IF CONVERSION GAIN (dB) -5 ISOLATION (dB) -10 -15 -20 -25 -10 -15 -20 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 -30 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 FREQUENCY (GHz) FREQUENCY (GHz) 5 MIXERS - SMT Conversion Gain vs. LO Drive 0 LO = -6 dBm LO = -4 dBm LO = -2 dBm LO = 0 dBm LO = +2 dBm LO = +4 dBm Return Loss @ LO = 0 dBm 0 -5 CONVERSION GAIN (dB) RETURN LOSS (dB) -5 -10 -15 -20 -25 LO RF -10 -15 -20 0.7 -30 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 FREQUENCY (GHz) FREQUENCY (GHz) Conversion Gain vs. Vdd @ LO = 0 dBm 0 2.7V 3.0V 3.3V IF Bandwidth @ LO = 0 dBm 0 CONVERSION GAIN (dB) -5 -5 RESPONSE (dB) -10 -10 -15 -15 -20 CONVERSION GAIN RETURN LOSS -20 0.7 -25 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 FREQUENCY (GHz) IF FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at sales@hittite.com 5 - 279 v00.0901 MICROWAVE CORPORATION HMC353MS8 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Upconverter Performance Conversion Gain @ LO = 0 dBm 0 Input P1dB vs. Temperature @ LO = 0 dBm 10 9 +25 C -40 C +85 C CONVERSION GAIN (dB) 8 -5 INPUT P1dB (dBm) 7 6 5 4 3 2 1 -10 -15 5 MIXERS - SMT -20 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 0 0.8 0.9 1 1.1 1.2 1.3 FREQUENCY (GHz) FREQUENCY (GHz) Input IP3 vs. LO Drive* 20 Input IP3 vs. Temperature @ LO = 0 dBm* 20 15 15 INPUT IP3 (dBm) 10 INPUT IP3 (dBm) 10 5 -2 dBm 0 dBm +2 dBm 5 +25 C -40 C +85 C 0 0.8 0.9 1 1.1 1.2 1.3 0 0.8 0.9 1 1.1 1.2 1.3 FREQUENCY (GHz) FREQUENCY (GHz) Input IP3 vs. Vdd @ LO = 0 dBm* 20 Input P1dB vs. Vdd @ LO = 0 dBm 10 9 8 +2.7V +3.0V +3.3V 15 INPUT P1dB (dBm) +2.7V +3.0V +3.3V INPUT IP3 (dBm) 7 6 5 4 3 2 1 10 5 0 0.8 0.9 1 1.1 1.2 1.3 0 0.8 0.9 1 1.1 1.2 1.3 FREQUENCY (GHz) FREQUENCY (GHz) * Two-tone input power= -10 dBm each tone, 1 MHz spacing. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at sales@hittite.com 5 - 280 v00.0901 MICROWAVE CORPORATION HMC353MS8 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz MxN Spurious @ IF Port nLO mRF 0 1 2 3 4 0 XX 8 50 68 >71 1 -10 0 50 69 >71 2 10 23 47 70 >71 3 6 31 38 65 >71 4 17 37 58 66 >71 Harmonics of LO nLO Spur @ RF Por t LO Freq. (GHz) 0.8 0.9 1 1.1 1.2 1.3 1 20 12 16 24 30 20 2 9 4 6 12 42 17 3 22 16 23 40 22 23 4 32 22 34 32 28 31 RF = 1.0 GHz @ -10 dBm LO = 0.9 GHz @ 0 dBm All values in dBc relative to the IF. LO = 0 dBm All values in dBc below input LO level @ RF por t. 5 MIXERS - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at sales@hittite.com 5 - 281 v00.0901 MICROWAVE CORPORATION HMC353MS8 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Absolute Maximum Ratings RF / IF Input (Vdd = +3V) LO Drive (Vdd = +3V) Vdd IF DC Current Storage Temperature Operating Temperature +13 dBm +13 dBm 5.5V ± 4 mA -65 to +150 deg C -40 to +85 deg C 5 Pin Locations & Outline Drawing MIXERS - SMT 1. MATERIAL: A. PACKAGE BODY - LOW STRESS INJECTION-MOLDED PLASTIC, SILICA & SILICONE IMPREGNATED. B. LEADFRAME MATERIAL: COPPER ALLOY 2. PLATING: LEAD-TIN SOLDER PLATE 3. DIMENSIONS ARE IN INCHES (MILLIMETERS). UNLESS OTHERWISE SPECIFIED ALL TOL. ARE ±0.005 (±0.13). 4. CHARACTERS TO BE HELVETICA MEDIUM, APPROX. 030 HIGH, WHITE INK, LOCATED APPROXIMATELY AS SHOWN. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15 mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25 mm PER SIDE. 5 - 282 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at sales@hittite.com v00.0901 MICROWAVE CORPORATION HMC353MS8 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Pin Descriptions Pin Number 1 Function LO Por t Description LO Por t: This pin is AC coupled and matched to 50 ohm from 0.8 - 1.2 GHz Interface Schematic 2, 4, 6, 7 GND Ground: Pin must connect to RF ground. 5 MIXERS - SMT 5 - 283 3 Vdd Power supply for the LO Amplifier. Two external RF bypass capacitor (10 pF & 10,000 pF) are required. 5 IF Por t IF Por t: This pin is DC coupled. For applications not requiring operation to DC, this por t should be DC blocked externally using a series capacitor whose values has been chosen to pass the necessar y IF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die non-function and possible die failure will result. 8 RF Por t RF Por t: This pin is AC coupled and matched to 50 ohm from 0.8 - 1.2 GHz. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at sales@hittite.com v00.0901 MICROWAVE CORPORATION HMC353MS8 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Evaluation PCB for HMC353MS8 5 MIXERS - SMT The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Evaluation Circuit Board Layout Design Details Item J1 - J4 C1 C2 L1 U1 PCB* Description PC Mount SMA RF Connector 10 pF Chip Capacitor, 0603 Pkg. .01 µF Chip Capacitor, 0603 Pkg. 6.8 nH Inductor, 0805 Pkg. HMC353MS8 Mixer 103928 Evaluation Board * Circuit Board Material: Rogers 4350 5 - 284 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at sales@hittite.com v00.0901 MICROWAVE CORPORATION HMC353MS8 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz HMC353MS8 Application Circuit 5 MIXERS - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at sales@hittite.com 5 - 285