HMC392LH5

HMC392LH5 v00.0707 GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz 8 LOW NOISE AMPLIFIERS - SMT Typical Applications The HMC392LH5 is ideal for: • Point-to-Point Radios • VSAT • LO Driver for HMC Mixers • Military EW, ECM, C3I • Space Features High Gain: 15.4 dB Low Noise Figure: 2.5 dB Single Positive Supply: +5V DC Blocked & 50 Ohm Matched RF I/Os No External Matching Components Required Hermetic SMT Package, 25 mm2 Functional Diagram General Description The HMC392LH5 is a GaAs MMIC Low Noise Amplifier packaged in a hermetic surface mount package which operates between 3.5 and 7 GHz. The amplifier provides 15.4 dB of gain, 2.5 dB noise figure, and +24.5 dBm output IP3 from a single+5V supply. The HMC392LH5 has six biasing options which allow the user to select the bias point and output power of the device (+13 to +17 dBm). The HMC392LH5 functions well as a low noise or driver amplifier and is ideal for driving the LO port of Hittite mixers. The HMC392LH5 is well suited for high reliability military, industrial and space applications. Electrical Specifi cations, TA = +25° C, Vdd = +5V, PS4= PS8= GND Parameter Frequency Range Gain Gain Variation Over Temperature Noise Figure Input Return Loss Output Return Loss Output Power for 1 dB Compression (P1dB) Saturated Output Power (Psat) Output Third Order Intercept (IP3) Supply Current (Idd) 22 11 12.8 Min. Typ. 4-6 15.4 0.018 2.5 15 17 13.5 17.5 24.5 43 60 21 0.025 3.2 12 Max. Min. Typ. 3.5 - 7 15.2 0.018 2.7 12 15 14 17.5 24.5 43 60 0.025 3.7 Max. Units GHz dB dB/ °C dB dB dB dBm dBm dBm mA Note: Data taken with pins PS4 & PS8 connected to ground and pins PS3, PS4, PS6 & PS7 unconnected (state 5) unless otherwise noted. 8 - 90 F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC392LH5 v00.0707 GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz Broadband Gain & Return Loss 20 Gain vs. Temperature 20 18 8 LOW NOISE AMPLIFIERS - SMT 8 - 91 10 RESPONSE (dB) GAIN (dB) S21 S11 S22 16 14 12 10 +25 C +85 C -40 C 0 -10 -20 8 -30 2 3 4 5 6 7 8 9 FREQUENCY (GHz) 6 3 4 5 6 7 8 FREQUENCY (GHz) Input Return Loss vs. Temperature 0 Output Return Loss vs. Temperature 0 +25C +85C - 40C -5 RETURN LOSS (dB) RETURN LOSS (dB) +25C +85C - 40C -5 -10 -10 -15 -15 -20 -20 -25 3 4 5 6 7 8 FREQUENCY (GHz) -25 3 4 5 6 7 8 FREQUENCY (GHz) Noise Figure vs. Temperature 5 Reverse Isolation vs. Temperature 0 -10 ISOLATION (dB) -20 -30 -40 -50 -60 +25C +85C - 40C 4 NOISE FIGURE (dB) 3 2 1 +25C +85C - 40C 0 3 4 5 6 7 8 FREQUENCY (GHz) 3 4 5 6 7 8 FREQUENCY (GHz) F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC392LH5 v00.0707 GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz 8 LOW NOISE AMPLIFIERS - SMT Output P1dB vs. Temperature 20 +25C +85C - 40C Psat vs. Temperature 22 20 18 16 14 +25C +85C - 40C 18 P1dB (dBm) 16 14 12 Psat (dBm) 3 4 5 6 7 8 12 10 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 FREQUENCY (GHz) FREQUENCY (GHz) 10 Output IP3 vs. Temperature 32 30 28 IP3 (dBm) 26 24 22 20 3 4 5 6 7 8 FREQUENCY (GHz) +25C +85C - 40C Gain, Noise Figure & Output Power vs. Supply Voltage @ 5.5 GHz GAIN (dB), NOISE FIGURE (dB), P1dB (dBm) 20 16 12 Gain Noise Figure P1dB 8 4 0 4.5 4.7 5 Vdd (V) 5.2 5.5 Output P1dB vs. Power Select State 24 22 20 P1dB (dBm) 18 16 14 12 10 3 4 5 6 7 8 FREQUENCY (GHz) State 1 Idd=60mA State 2 Idd=50mA State 3 Idd=43mA State 4 Idd=53mA State 5 Idd=43mA State 6 Idd=38mA Gain & Noise Figure vs. Power Select State 18 GAIN, NOISE FIGURE (dB) 15 12 9 6 3 0 3 4 5 6 7 8 FREQUENCY (GHz) Gain State 1 Gain State 2 Gain State 3 Gain State 4 Gain State 5 Gain State 6 NF State 1 NF State 2 NF State 3 NF State 4 NF State 5 NF State 6 8 - 92 F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC392LH5 v00.0707 GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz Power Compression @ 5.5 GHz 20 Pout (dBm), GAIN (dB), PAE (%) Absolute Maximum Ratings Drain Bias Voltage (Vdd) RF Input Power (RFIN)(Vdd = +5 Vdc) Channel Temperature +8 Vdc +10 dBm 175 °C 0.629 W 143.08 °C/W -65 to +150 °C -40 to +85° C 8 LOW NOISE AMPLIFIERS - SMT 8 - 93 15 Pout Gain PAE Continuous Pdiss (T= 85 °C) (derate 6.99 mW/°C above 85 °C) Thermal Resistance (channel to ground paddle) Storage Temperature Operating Temperature 10 5 0 -15 -13 -11 -9 -7 -5 -3 -1 1 3 5 Typical Supply Current vs. Vdd Vdd (Vdc) +4.5 +5.0 +5.5 (State 5 Depicted) Idd (mA) 43 44 45 INPUT POWER (dBm) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: CERAMIC & KOVAR 2. LEAD AND GROUND PADDLE PLATING: GOLD 40 - 80 MICROINCHES. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PAD BURR LENGTH 0.15mm MAX. PAD BURR HEIGHT 0.25mm MAX. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC392LH5 v00.0707 GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz 8 LOW NOISE AMPLIFIERS - SMT Pin Descriptions Pin Number 2 Function RFIN Description This pin is AC coupled and matched to 50 Ohms. Interface Schematic Power Select 12 11 PS3 PS4 One of these pins must be connected to ground and one must be unconnected. See Power Select Table for selection criteria. Power Select 6 5 4 PS7 PS8 PS9 One of these pins must be connected to ground and two must be unconnected. See Power Select Table for selection criteria. 10 Vdd Power supply voltage for amplifier. External bypass 100pF, 1000pF and 4.7 μF are required. 8 RFOUT This pin is AC coupled and matched to 50 Ohms. 1, 3, 7, 9 GND These pins and package bottom must be connected to RF/DC ground. Power Select Table State 1 2 3 4 5 6 Pins Connected to Ground PS3 & PS7 PS3 & PS8 PS3 & PS9 PS4 & PS7 PS4 & PS8 PS4 & PS9 Typical Idd (mA) 60 50 43 53 43 38 Typical Output P1dB (dBm) 16.8 15.7 13.5 15.5 14.0 12.8 Typical Gain (dB) 16.0 15.5 15.3 15.4 15.2 15.2 Typical Noise Figure (dB) 2.7 2.7 2.9 2.9 2.7 2.7 8 - 94 F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC392LH5 v00.0707 GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz Evaluation PCB 8 LOW NOISE AMPLIFIERS - SMT List of Materials for Evaluation PCB 117431 [1] Item J1, J2 J3 - J4 C1 C2 C3 U1 PCB [2] SMA DC Pin 100 pF capacitor, 0402 pkg. 1,000 pF Capacitor, 0603 pkg. 4.7 μF Capacitor, Tantalum HMC392LH5 Amplifier 117429 Evaluation PCB Description [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350. The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 95