HMC398QS16G

HMC398QS16G / 398QS16GE v02.0805 Ku-Band MMIC VCO with DIVIDE-BY-8, 14 - 15 GHz Typical Applications Low noise MMIC VCO w/Divide-by-8 for Ku-Band applications such as: • Point-to-Point Radios • Point-to-Multi-Point Radios / LMDS • VSAT Features Pout: +7 dBm Phase Noise: -105 dBc/Hz @100 KHz Typ. No External Resonator Needed Single Supply: 5V @ 325 mA QSOP16G SMT Package Functional Diagram General Description The HMC398QS16G & HMC398QS16GE are single chip GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCOs. The HMC398QS16G & HMC398QS16GE integrate resonators, negative resistance devices, varactor diodes and divide-by-8 prescalers. The VCO’s phase noise performance is excellent over temperature, shock, and process due to the oscillator’s monolithic structure. Power output is +7 dBm typical from a 5V supply voltage. The voltage controlled oscillator is packaged in a low cost, surface mount 16 leaded QSOP package with an exposed base for improved RF and thermal performance. The HMC398QS16G & HMC398QS16GE require no external components 11 VCOS & PLOs - SMT Electrical Specifi cations, TA = +25° C, Vcc1, Vcc2 = +5.0V Parameter Frequency Range Power Output SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RF Output Tune Voltage Supply Current Tune Port Leakage Current (Vtune= 10V) Output Return Loss Harmonics/Subharmonics 1/2 3/2 2nd 5/2 2 -20 -30 -12 -40 4 30 1.5 Vtune Icc 1 (Digital) Icc 2 (RF) 1.0 65 260 10 RF Output Divided Output +3 -9 Min. Typ. 14.0 - 15.0 +7 -6 -105 10.0 Max. Units GHz dBm dBm dBc/Hz V mA mA µA dB dBc dBc dBc dBc MHz pp MHz/V MHz/°C Pulling (into a 2.0:1 VSWR) Pushing @ Vtune= 5V Frequency Drift Rate 11 - 50 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC398QS16G / 398QS16GE v02.0805 Ku-Band MMIC VCO with DIVIDE-BY-8, 14 - 15 GHz Frequency vs. Tuning Voltage, T= 25°C 15.4 OUTPUT FREQUENCY (GHz) 15.2 15 14.8 14.6 14.4 14.2 14 13.8 1 2 3 4 5 6 7 8 9 10 TUNING VOLTAGE (VOLTS) Vcc= 4.75V Vcc= 5.0V Vcc= 5.25V Frequency vs. Tuning Voltage, Vcc= +5V 15.4 OUTPUT FREQUENCY (GHz) 15.2 15 14.8 14.6 14.4 14.2 14 13.8 1 2 3 4 5 6 7 8 9 10 TUNING VOLTAGE (VOLTS) +25 C +85 C -40 C 11 VCOS & PLOs - SMT 11 - 51 Sensitivity vs. Tuning Voltage, Vcc= +5V 400 350 SENSITIVITY (MHz/VOLT) 300 250 200 150 100 50 0 1 2 3 4 5 6 7 8 9 10 TUNING VOLTAGE (VOLTS) +25 C +85 C -40 C Output Power vs. Tuning Voltage, Vcc= +5V 15 OUTPUT POWER (dBm) 12 9 6 +25 C +85 C -40 C 3 0 1 2 3 4 5 6 7 8 9 10 TUNING VOLTAGE (VOLTS) SSB Phase Noise vs. Tuning Voltage -60 SSB PHASE NOISE (dBc/Hz) -70 -80 -90 -100 -110 -120 1 2 3 4 5 6 7 8 9 10 TUNING VOLTAGE (VOLTS) 10 kHz offset 100 kHz offset SSB Phase Noise @ Vtune= 5V 0 -15 SSB PHASE NOISE (dBc/Hz) -30 -45 -60 -75 -90 -105 -120 -135 -150 3 10 10 4 +25 C +85 C -40 C 10 5 10 6 10 7 OFFSET FREQUENCY (Hz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC398QS16G / 398QS16GE v02.0805 Ku-Band MMIC VCO with DIVIDE-BY-8, 14 - 15 GHz Divided Output Power vs. Tuning Voltage, Vcc= +5V* 0 DIVIDED OUTPUT POWER (dBm) -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 1 2 3 4 5 6 7 8 9 10 +25 C +85 C -40 C Divided Output Frequency vs. Tuning Voltage, Vcc= +5V DIVIDED OUTPUT FREQUENCY (GHz) 1.94 1.92 1.9 1.88 1.86 1.84 1.82 1.8 1.78 1.76 1.74 1.72 1.7 1 2 3 4 5 6 7 8 9 10 TUNING VOLTAGE (VOLTS) +25 C +85 C -40 C 11 VCOS & PLOs - SMT TUNING VOLTAGE (VOLTS) Divided Output SSB Phase Noise @ Vtune = 5V 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 -130 -140 -150 3 10 SSB PHASE NOISE (dBc/Hz) 10 4 10 5 10 6 10 7 OFFSET FREQUENCY (Hz) *Note: Tuning voltage must not drop below 1.0V for proper divider output. 11 - 52 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC398QS16G / 398QS16GE v02.0805 Ku-Band MMIC VCO with DIVIDE-BY-8, 14 - 15 GHz Typical Supply Current vs. Vcc Vcc (V) 4.75 5.0 5.25 Icc (mA) 300 325 350 Absolute Maximum Ratings Vcc1, Vcc2 Storage Temperature Operating Temperature Vtune +5.5 -65 to +150 °C -40 to +85 °C 0 to 11V Note: VCO will operate over full voltage range shown above. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing 11 VCOS & PLOs - SMT Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC398QS16G HMC398QS16GE Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Package Marking [3] H398 XXXX H398 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 11 - 53 HMC398QS16G / 398QS16GE v02.0805 Ku-Band MMIC VCO with DIVIDE-BY-8, 14 - 15 GHz Pin Descriptions Pin Number Function Description Interface Schematic 1 RFOUT RF output (AC coupled). 2, 3, 4, 6, 8, 9, 10, 13, 14, 16 N/C No Connection 11 VCOS & PLOs - SMT 5 VTUNE Control Voltage Input. Modulation port bandwidth dependent on drive source impedance. 7, 15 VCC1, VCC2 Supply Voltage, 5V 11 OUT Divided Output 12 NOUT Divided Output 180° output phase with pin 11. GND Package bottom has an exposed metal paddle that must be RF & DC grounded. 11 - 54 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC398QS16G / 398QS16GE v02.0805 Ku-Band MMIC VCO with DIVIDE-BY-8, 14 - 15 GHz Evaluation PCB 11 VCOS & PLOs - SMT List of Materials for Evaluation PCB 104711 [1] Item J1 - J4 J5 - J6 C1 - C2 C3 - C6 U1 PCB [2] Description PCB Mount SMA RF Connector 2 mm DC Header 10 μF Tantalum Capacitor 1,000 pF Capacitor 0402 Pkg. HMC398QS16G / HMC398QS16GE VCO 104436 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 11 - 55 HMC398QS16G / 398QS16GE v02.0805 Ku-Band MMIC VCO with DIVIDE-BY-8, 14 - 15 GHz Typical Application Circuit 11 VCOS & PLOs - SMT 11 - 56 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC398QS16G / 398QS16GE v02.0805 Ku-Band MMIC VCO with DIVIDE-BY-8, 14 - 15 GHz Notes: 11 VCOS & PLOs - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 11 - 57