HMC410AMS8GE

HMC410AMS8G / 410AMS8GE v00.0410 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Features Conversion Loss: 8 dB LO/rF isolation: 40 dB LO/iF isolation: 37 dB input iP3: +24 dBm No external Components Typical Applications The HMC410AMs8G(e) is ideal for: • Long Haul radio Platforms • Microwave radio • VsAT 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT MsOP8G sMT Package Functional Diagram General Description The HMC410AMs8G(e) is a passive double-balanced high iP3 mixer that operates between 9 and 15 GHz. The HMC410AMs8G(e) operates with LO drive levels between +13 dBm and +19 dBm, and provides 8 dB conversion loss across the entire specified frequency band. These mixers require no external components or bias. Electrical Specifications, TA = +25° C Parameter Min. Frequency range, rF & LO Frequency range, iF Conversion Loss Noise Figure (ssB) LO to rF isolation LO to iF isolation rF to iF isolation iP3 (input) 1 dB Compression (input) 30 30 8 20 11 iF = 1.45 GHz LO = +17 dBm Typ. 9 - 15 DC - 2.5 8 8 40 - 45 37 17 24 14 11 11 Max. GHz GHz dB dB dB dB dB dBm dBm Units * Unless otherwise noted, all measurements performed as downconverter, IF= 1.45 GHz. 10 - 1 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC410AMS8G / 410AMS8GE v00.0410 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Isolation @ LO = +17 dBm 0 -10 RF/IF LO/RF LO/IF Conversion Gain vs. Temperature @ LO = +17 dBm 0 CONVERSION GAIN (dB) -5 ISOLATION (dB) -20 -30 -40 -50 -60 8 9 10 11 12 13 14 15 16 8 9 10 11 -10 10 13 14 15 16 -15 +25 C -40 C +85 C -20 FREQUENCY (GHz) 12 FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 +11 dBm +13 dBm +15 dBm +17 dBm +19 dBm Return Loss @ LO = +17 dBm 0 CONVERSION GAIN (dB) RETURN LOSS (dB) -5 -5 -10 -10 -15 RF LO -15 -20 -20 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) -25 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) IF Bandwidth @ LO = +17 dBm 0 -5 RESPONSE (dB) -10 -15 -20 -25 -30 0 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) IF CONVERSION GAIN IF RETURN LOSS Upconverter Performance Conversion Gain @ LO = +17 dBm 0 CONVERSION GAIN (dB) -5 -10 -15 -20 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 Mixers - siNGLe & DOUBLe BALANCeD - sMT HMC410AMS8G / 410AMS8GE v00.0410 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Input IP3 vs. Temperature @ LO = +17 dBm* 35 Input IP3 vs. LO Drive* 35 P1dB (dBm) P1dB (dBm) 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT 30 30 25 25 20 +15 dBm +17 dBm +19 dBm 20 +25 C -40 C +85 C 15 9 10 11 12 13 14 15 FREQUENCY (GHz) 15 9 10 11 12 13 14 15 FREQUENCY (GHz) Input IP2 vs. LO Drive * 80 75 70 Input P1dB vs. Temperature @ LO = +17 dBm 20 18 P1dB (dBm) IP2 (dBm) 65 60 55 50 45 40 9 10 11 12 13 14 15 FREQUENCY (GHz) +15 dBm +17 dBm +19 dBm 16 +25 C -40 C +85 C 14 12 10 9 10 11 12 13 14 15 FREQUENCY (GHz) MxN Spurious @ IF Port nLO mrF 0 1 2 3 4 0 xx 15 85 >90 N/A 1 4 0 70 >90 >90 2 28 40 67 >90 >90 3 23 62 78 79 >90 4 N/A 46 83 >90 >90 Harmonics of LO nLO spur @ rF Port LO Freq. (GHz) 9 10.5 12 13.5 15 16.5 1 34 37 44 47 40 34 2 28 37 45 46 56 47 3 46 50 46 62 58 51 4 60 69 60 N/A N/A N/A rF = 14.45 GHz @ -10 dBm LO = 13 GHz @ +17 dBm All values in dBc relative to the iF power level. Measured as downconverter. LO = +17 dBm All values in dBc below input LO level @ rF port. * Two-tone input power = 0 dBm each tone, 1 MHz spacing. 10 - 3 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC410AMS8G / 410AMS8GE v00.0410 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Absolute Maximum Ratings rF / iF input LO Drive iF DC Current storage Temperature Operating Temperature esD sensitivity (HBM) +20 dBm +27 dBm ±4 mA -65 to +150 °C -40 to +85 °C Class 1A 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT 10 - 4 eLeCTrOsTATiC seNsiTiVe DeViCe OBserVe HANDLiNG PreCAUTiONs Outline Drawing NOTes: 1. LeADFrAMe MATeriAL: COPPer ALLOY 2. DiMeNsiONs Are iN iNCHes [MiLLiMeTers] 3. DiMeNsiON DOes NOT iNCLUDe MOLDFLAsH OF 0.15mm Per siDe. 4. DiMeNsiON DOes NOT iNCLUDe MOLDFLAsH OF 0.25mm Per siDe. 5. ALL GrOUND LeADs AND GrOUND PADDLe MUsT Be sOLDereD TO PCB rF GrOUND. Package Information Part Number HMC410AMs8G HMC410AMs8Ge Package Body Material Low stress injection Molded Plastic roHs-compliant Low stress injection Molded Plastic Lead Finish sn/Pb solder 100% matte sn MsL rating MsL1 MsL1 [1] Package Marking [3] H410A xxxx H410A xxxx [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number xxxx F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC410AMS8G / 410AMS8GE v00.0410 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Pin Descriptions Pin Number 1, 8 Function GND Description Pins and exposed ground slug must be connected to rF ground. interface schematic 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT 2 LO This pin is AC coupled and matched to 50 Ohms. 3, 4, 6 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to rF/DC ground externally. This pin is DC coupled. For applications not requiring operation to DC this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary iF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die nonfunction and possible die failure will result. 5 iF 7 rF This pin is DC coupled and matched to 50 Ohms. 10 - 5 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC410AMS8G / 410AMS8GE v00.0410 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Evaluation PCB 10 Mixers - siNGLe & DOUBLe BALANCeD - sMT 10 - 6 List of Materials for Evaluation PCB 103350 [1] item J1 - J2 J3 U1 PCB [2] Description PCB Mount sMA rF Connector, sri PCB Mount sMA Connector, Johnson HMC410AMs8G(e) Mixer 101650 evaluation Board [1] reference this number when ordering complete evaluation PCB [2] Circuit Board Material: rogers 4350 The circuit board used in the application should use rF circuit design techniques. signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com