HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
5
AMPLIFIERS - SMT
Designer’s Kit Available
Typical Applications
The HMC453ST89 / HMC453ST89E is ideal for applications requiring a high dynamic range amplifier: • GSM, GPRS & EDGE • CDMA & W-CDMA • CATV/Cable Modem • Fixed Wireless
Features
Output IP3: +49 dBm 20.5 dB Gain @ 400 MHz 7.5 dB Gain @ 2100 MHz 41% PAE @ +32.5 dBm Pout +26 dBm CDMA2000 Channel Power @ -45 dBc ACP Included in the HMC-DK002 Designer’s Kit
Functional Diagram
General Description
The HMC453ST89 & HMC453ST89E are high dynamic range GaAs InGaP HBT 1.6 Watt MMIC power amplifiers operating from 0.4 to 2.2 GHz and packaged in industry standard SOT89 packages. Utilizing a minimum number of external components and a single +5V supply, the amplifier output IP3 can be optimized to +47 dBm at 0.4 GHz or +49 dBm at 2.1 GHz. The high output IP3 and PAE make the HMC453ST89 & HMC453ST89E ideal power amplifiers for Cellular/ PCS/3G and Fixed Wireless applications.
Electrical Specifications, TA = +25°C, Vs= +5V [1]
Parameter Frequency Range Gain Gain Variation Over Temperature Input Return Loss Output Return Loss Output Power for 1dB Compression (P1dB) Saturated Output Power (Psat) Output Third Order Intercept (IP3) [2] Noise Figure Supply Current (Icq) 44 28.5 18 Min. Typ. 400 - 410 20.5 0.012 20 12 31.5 32 47 9 725 45 29 0.02 16.5 Max. Min. Typ. 450 - 496 19 0.012 14 12 32 32.25 48 9 725 44 28.5 0.02 12 Max Min. Typ. 810 - 960 14.5 0.012 20 13 31.5 31.75 47 6.5 725 46 29 0.02 6 Max. Min. Typ. Max. Min. Typ. Max. Units MHz dB 0.02 dB / °C dB dB dBm dBm dBm dB mA 1710 - 1990 8.5 0.012 15 15 32 32.5 49 7 725 46 29.5 0.02 6 2010 - 2170 7.5 0.012 13 18 32.5 32.75 49 6.5 725
[1] Specifications and data reflect HMC453ST89 measured using the respective application circuits for each designated frequency band found herein. Contact the HMC Applications Group for assistance in optimizing performance for your application. [2] Two-tone input power of 0 dBm per tone, 1 MHz spacing.
5 - 318
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain & Return Loss @ 400
25 20 15 RESPONSE (dB) 10 5 0 -5 -10 -15 -20 -25 0.1 0.2 0.3 0.4 0.5 0.6 0.7
S21 S11 S22
Gain vs. Temperature @ 400 MHz
23 22 21 20 GAIN (dB) 19 18 17 16 15 14 13 12 0.35 0.37 0.39 0.41 0.43 0.45
+25 C +85 C -40 C
5
AMPLIFIERS - SMT
5 - 319
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss vs. Temperature @ 400 MHz
0
Output Return Loss vs. Temperature @ 400 MHz
0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 0.35
+25 C +85 C -40 C
-5 RETURN LOSS (dB)
+25 C +85 C -40 C
-10
-15
-20
-25 0.35
0.37
0.39
0.41
0.43
0.45
0.37
0.39
0.41
0.43
0.45
FREQUENCY (GHz)
FREQUENCY (GHz)
P1dB vs. Temperature @ 400 MHz
34 33 32 31 P1dB (dBm) 30 29 28 27 26 25 24 0.35 0.37 0.39 0.41 0.43 0.45
+25 C +85 C -40 C
Psat vs. Temperature @ 400 MHz
34 33 32 31 Psat (dBm) 30 29 28 27 26 25 24 0.35 0.37 0.39 0.41 0.43 0.45
+25 C +85 C -40 C
FREQUENCY (GHz)
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
5
AMPLIFIERS - SMT
Output IP3 vs. Temperature @ 400 MHz
52 50 48 46 OIP3 (dBm) 44 42 40 38 36 34 32 30 0.35 0.37 0.39 0.41 0.43 0.45
+25 C +85 C -40 C
Noise Figure vs. Temperature @ 400 MHz
11 10 9 NOISE FIGURE (dB) 8 7 6 5 4 3 2 1 0 0.35 0.37 0.39 0.41 0.43 0.45
+25 C +85 C -40 C
FREQUENCY (GHz)
FREQUENCY (GHz)
Reverse Isolation vs. Temperature @ 400 MHz
0 -5 ISOLATION (dB) -10 -15 -20 -25 -30 0.35
Gain, Power & IP3 vs. Supply Voltage @ 400 MHz
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 55 50 45 40 35 30 25 20 15 10 4.5
Gain P1dB Psat OIP3
+25 C +85 C -40 C
0.37
0.39
0.41
0.43
0.45
4.75
5 Vs (Vdc)
5.25
5.5
FREQUENCY (GHz)
Power Compression @ 400 MHz
45 Pout (dBm), Gain (dB), PAE (%) 40 35 30 25 20 15 10 5 0 0 2 4 6 8 10 12 14 16 INPUT POWER (dBm)
Pout Gain PAE
ACPR vs. Supply Voltage @ 400 MHz W-CDMA, 64 DPCH
-10 -15 -20 -25 ACPR (dBc) -30 -35 -40 -45 -50 -55 -60 -65 -70 8 10 12 14 16 18
Source ACPR 4.5V 5V 5.5V W-CDMA Frequency: 400 MHz Integration BW: 3.84 MHz 64 DPCH
20
22
24
26
28
Channel Power (dBm)
5 - 320
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain & Return Loss @ 470 MHz
25 20 15 RESPONSE (dB) GAIN (dB) 10 5 0 -5 -10 -15 0.1
S21 S11 S22
Gain vs. Temperature @ 470 MHz
23 22 21 20 19 18 17 16 15 14 13 12 0.43
+25 C +85 C -40 C
5
AMPLIFIERS - SMT
5 - 321
0.2
0.3
0.4
0.5
0.6
0.7
0.45
0.47
0.49
0.51
0.53
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss vs. Temperature @ 470 MHz
0
Output Return Loss vs. Temperature @ 470 MHz
0
RETURN LOSS (dB)
-10
RETURN LOSS (dB)
-5
+25 C +85 C -40 C
-5
+25 C +85 C -40 C
-10
-15
-15
-20 0.43
0.45
0.47
0.49
0.51
0.53
-20 0.43
0.45
0.47
0.49
0.51
0.53
FREQUENCY (GHz)
FREQUENCY (GHz)
P1dB vs. Temperature @ 470 MHz
34 33 32 31 P1dB (dBm) 30 29 28 27 26 25 24 0.43 0.45 0.47 0.49 0.51 0.53
+25 C +85 C -40 C
Psat vs. Temperature @ 470 MHz
34 33 32 31 Psat (dBm) 30 29 28 27 26 25 24 0.43 0.45 0.47 0.49 0.51 0.53
+25 C +85 C -40 C
FREQUENCY (GHz)
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
Noise Figure vs. Temperature @ 470 MHz
11 10 9 NOISE FIGURE (dB) 8 7 6 5 4 3 2 1 0 0.43
+25 C +85 C -40 C
5
AMPLIFIERS - SMT
Output IP3 vs. Temperature @ 470 MHz
52 50 48 46 OIP3 (dBm) 44 42 40 38 36 34 32 30 0.43 0.45 0.47 0.49 0.51 0.53
+25 C +85 C -40 C
0.45
0.47
0.49
0.51
0.53
FREQUENCY (GHz)
FREQUENCY (GHz)
Reverse Isolation vs. Temperature @ 470 MHz
0 -5 ISOLATION (dB) -10 -15 -20 -25 -30 0.43
Gain, Power & IP3 vs. Supply Voltage @ 470 MHz
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 50 45 40 35 30 25 20 15 10 4.5
Gain P1dB Psat OIP3
+25 C +85 C -40 C
0.45
0.47
0.49
0.51
0.53
4.75
5 Vs (Vdc)
5.25
5.5
FREQUENCY (GHz)
Power Compression @ 470 MHz
50 Pout (dBm), Gain (dB), PAE (%) 45 40 35 30 25 20 15 10 5 0 0 2 4 6 8 10 12 14 16 INPUT POWER (dBm)
Pout Gain PAE
ACPR vs. Supply Voltage @ 470 MHz W-CDMA, 64 DPCH
-10 -15 -20 -25 ACPR (dBc) -30 -35 -40 -45 -50 -55 -60 -65 -70 8 10 12 14 16 18
Source ACPR 4.5V 5V 5.5V W-CDMA Frequency: 470 MHz Integration BW: 3.84 MHz 64 DPCH
20
22
24
26
28
Channel Power (dBm)
5 - 322
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain & Return Loss @ 900 MHz
20 15 10 RESPONSE (dB)
Gain vs. Temperature @ 900 MHz
18 17 16 15 GAIN (dB)
5
AMPLIFIERS - SMT
5 - 323
5 0 -5 -10
S21 S11 S22
14 13 12 11 10
+25C +85C -40C
-15 -20 0.4
9 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 8 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss vs. Temperature @ 900 MHz
0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 0.7
Output Return Loss vs. Temperature @ 900 MHz
0
RETURN LOSS (dB)
+25C +85C -40C
-5
+25C +85C -40C
-10
-15
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
-20 0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
FREQUENCY (GHz)
FREQUENCY (GHz)
P1dB vs. Temperature @ 900 MHz
34 33 32 31 P1dB (dBm) 30 29 28 27 26 25 24 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1
+25C +85C -40C
Psat vs. Temperature @ 900 MHz
34 33 32 31 Psat (dBm) 30 29 28 27 26 25 24 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1
+25C +85C -40C
FREQUENCY (GHz)
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
Noise Figure vs. Temperature @ 900 MHz
10 9
5
AMPLIFIERS - SMT
Output IP3 vs. Temperature @ 900 MHz
55
50 NOISE FIGURE (dB) OIP3 (dBm)
8 7 6 5 4 3 2 1
+25C +85C -40C
45
+25C
40
+85C -40C
35
30 0.75
0.8
0.85
0.9
0.95
1
0 0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
FREQUENCY (GHz)
FREQUENCY (GHz)
Reverse Isolation vs. Temperature @ 900 MHz
0 -5 ISOLATION (dB) -10 -15 -20 -25 -30 0.7
+25C +85C -40C
Gain, Power & IP3 vs. Supply Voltage @ 900 MHz
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 55 50 45 40 35 30 25 20 15 10 4.5
Gain P1dB Psat OIP3
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
4.75
5 Vs (Vdc)
5.25
5.5
FREQUENCY (GHz)
Power Compression @ 900 MHz
55 Pout (dBm), Gain (dB), PAE (%) 50 45 40 35 30 25 20 15 10 5 0 4 6 8 10 12 14 16 18 20 INPUT POWER (dBm)
Pout Gain PAE
ACPR vs. Supply Voltage @ 910 MHz CDMA IS95, 9 Channels Forward
-10 -15 -20 -25 ACPR (dBc) -30 -35 -40 -45 -50 -55 -60 -65 -70 8 10 12 14 16
Source ACPR 4.5V 5V 5.5V CDMA IS95 Frequency: 910 MHz Integration BW: 1.228 MHz Forward Link, 9 Channels
18
20
22
24
26
Channel Power (dBm)
5 - 324
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain & Return Loss @ 1900 MHz
15 10 5 RESPONSE (dB)
Gain vs. Temperature @ 1900 MHz
12 11 10 9 8 GAIN (dB) 7 6 5 4
S21 S11 S22 +25 C +85 C -40 C
5
AMPLIFIERS - SMT
5 - 325
0 -5 -10 -15 -20 -25 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 FREQUENCY (GHz)
3 2 1 0 1.7 1.8 1.9
2
2.1
FREQUENCY (GHz)
Input Return Loss vs. Temperature @ 1900 MHz
0
+25 C +85 C -40 C
Output Return Loss vs. Temperature @ 1900 MHz
0
+25 C +85 C -40 C
-5 RETURN LOSS (dB)
-5 RETURN LOSS (dB) 2 2.1
-10
-10
-15
-15
-20
-20
-25 1.7
1.8
1.9 FREQUENCY (GHz)
-25 1.7
1.8
1.9 FREQUENCY (GHz)
2
2.1
P1dB vs. Temperature @ 1900 MHz
36 35 34 33 P1dB (dBm) 31 30 29 28 27 26 25 24 1.7 1.8 1.9 FREQUENCY (GHz) 2 2.1
+25 C +85 C -40 C
Psat vs. Temperature @ 1900 MHz
36 35 34 33 Psat (dBm) 32 31 30 29 28 27 26 25 24 1.7 1.8 1.9 FREQUENCY (GHz) 2 2.1
+25 C +85 C -40 C
32
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
5
AMPLIFIERS - SMT
Output IP3 vs. Temperature @ 1900 MHz
52 50 48 46 OIP3 (dBm) 44 42 40 38 36 34 32 30 1.7 1.8 1.9 FREQUENCY (GHz) 2 2.1
+25 C +85 C -40 C
Noise Figure vs. Temperature @ 1900 MHz
10 9 8 NOISE FIGURE (dB) 7 6 5 4 3 2 1 0 1.7 1.8 1.9 FREQUENCY (GHz) 2 2.1
+25 C +85 C -40 C
Reverse Isolation vs. Temperature @ 1900 MHz
0
Gain, Power & IP3 vs. Supply Voltage @ 1900 MHz
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 55 50 45 40 35 30 25 20 15 10 5 4.5 4.75 5 Vs (Vdc) 5.25 5.5
Gain P1dB Psat OIP3
-5 ISOLATION (dB)
-10
+25 C +85 C -40 C
-15
-20 1.7
1.8
1.9 FREQUENCY (GHz)
2
2.1
Power Compression @ 1900 MHz
40 Pout (dBm), Gain (dB), PAE (%) 35 30 25 20 15 10
Pout Gain PAE
ACPR vs. Supply Voltage @ 1960 MHz CDMA 2000, 9 Channels Forward
-30 -35 -40 -45 ACPR (dBc) -50 -55 -60 -65 -70
CDMA2000 Frequency: 1.96 GHz Integration BW: 1.228 MHz Forward Link, SR1, 9 Channels 4.5V 5V 5.5V
5 0 10 12 14 16 18 20 22 24 26 28 INPUT POWER (dBm)
-75 -80 14 16 18 20 22 24 26 28
OUTPUT CHANNEL POWER (dBm)
5 - 326
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain & Return Loss @ 2100 MHz
10 5 RESPONSE (dB) 0 GAIN (dB) -5 -10 -15 -20 -25 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 FREQUENCY (GHz)
Gain vs. Temperature @ 2100 MHz
10 9 8 7 6 5 4 3
+25 C +85 C -40 C
5
AMPLIFIERS - SMT
5 - 327
S21 S11 S22
2 1 0 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3
Input Return Loss vs. Temperature @ 2100 MHz
0
Output Return Loss vs. Temperature @ 2100 MHz
0 -5
RETURN LOSS (dB)
RETURN LOSS (dB)
-5
+25 C +85 C -40 C
-10 -15 -20 -25
+25 C +85 C -40 C
-10
-15
-20 1.9
2
2.1 FREQUENCY (GHz)
2.2
2.3
-30 1.9
2
2.1 FREQUENCY (GHz)
2.2
2.3
P1dB vs. Temperature @ 2100 MHz
35 34 33 32 P1dB (dBm) 31 30 29 28 27 26 25 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3
+25 C +85 C -40 C
Psat vs. Temperature @ 2100 MHz
35 34 33 32 Psat (dBm) 31 30 29 28 27 26 25 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3
+25 C +85 C -40 C
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
Noise Figure vs. Temperature @ 2100 MHz
10 9 8 NOISE FIGURE (dB) 7 6 5 4 3 2 1
+25 C +85 C -40 C
5
AMPLIFIERS - SMT
Output IP3 vs. Temperature @ 2100 MHz
52 50 48 46 OIP3 (dBm) 44 42 40 38 36 34 32 30 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3
+25 C +85 C -40 C
0 1.9
2
2.1 FREQUENCY (GHz)
2.2
2.3
Reverse Isolation vs. Temperature @ 2100 MHz
0
Gain, Power & IP3 vs. Supply Voltage @ 2100 MHz
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 55 50 45 40 35 30 25 20 15 10 5 4.5 4.75 5 Vs (Vdc) 5.25 5.5
Gain P1dB Psat OIP3
-5 ISOLATION (dB)
-10
+25 C +85 C -40 C
-15
-20 1.9
2
2.1 FREQUENCY (GHz)
2.2
2.3
Power Compressions @ 2100 MHz
45 Pout (dBm), Gain (dB), PAE (%) 40 35 30 25 20 15 10 5 0 10 12 14 16 18 20 22 24 26 28 INPUT POWER (dBm)
Pout Gain PAE
ACPR vs. Supply Voltage @ 2140 MHz W-CDMA, 64 DPCH
-20 -25 -30 ACPR (dBc) -35 -40 -45 -50 -55 -60 Source ACPR -65 12 14 16 18 20 22 24 26 28 OUTPUT CHANNEL POWER (dBm) 5.5V
W-CDMA Frequency: 2.14 GHz Integration BW: 3.84 MHz 64 DPCH
4.5V
5V
5 - 328
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
Power Dissipation
4.5
Absolute Maximum Ratings
Collector Bias Voltage (Vcc) +6.0 Vdc +32 dBm 150 °C 3.8 W 17.1 °C/W -65 to +150 °C -40 to +85 °C RF Input Power (RFin)(Vs +5.0 Vdc) Junction Temperature Continuous Pdiss (T = 85 °C) (derate 58.5 mW/°C above 85 °C)
2100 MHz
5
AMPLIFIERS - SMT
5 - 329
POWER DISSIPATION (W)
4 3.5 3 2.5 2
Max Pdiss @ +85 C
Thermal Resistance (junction to ground paddle) Storage Temperature
1900 MHz 1.5 1 0 5 10 15 20 25
Operating Temperature
INPUT POWER (dBm)
ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number HMC453ST89 HMC453ST89E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1
[1]
Package Marking [3] H453 XXXX H453 XXXX
[2]
[1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
5
AMPLIFIERS - SMT
Pin Descriptions
Pin Number Function Description This pin is DC coupled. Off chip matching components are required. See Application Circuit herein. Interface Schematic
1
RFIN
3
RFOUT
RF output and DC Bias input for the amplifier. Off chip matching components are required. See Application Circuit herein.
2, 4
GND
These pins & package bottom must be connected to RF/DC ground.
400 MHz Application Circuit
This circuit was used to specify the performance for 400-410 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application.
TL1 Impedance Physical Length Electrical Length 50 Ohm 0.16” 4°
TL2 50 Ohm 0.04” 1°
TL3 50 Ohm 0.06” 1°
TL4 50 Ohm 0.21” 5°
TL5 50 Ohm 0.04” 1°
TL6 50 Ohm 0.10” 2°
Recommended Component Values C1, C4 C2, C3 C5 C6 C7 C8 L1 L2 L3 L4 R1 10 pF 8.2 pF 39 pF 100 pF 12 pF 2.2 μF 47 nH 40 nH 4.3 nH 5.1 nH 5.1 Ohm
PCB Material: 10 mil Rogers 4350, Er = 3.48
5 - 330
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
400 MHz Evaluation PCB
5
AMPLIFIERS - SMT
List of Materials for Evaluation PCB 110957-400
Item J1 - J2 J3 C1, C4 C2, C3 C5 C6 C7 C8 L1 L2 L3 L4 R1 U1 PCB [2] Description PCB Mount SMA Connector 2 mm DC Header 10 pF Capacitor, 0402 Pkg. 8.2 pF Capacitor, 0402 Pkg. 39 pF Capacitor, 0402 Pkg. 100 pF Capacitor, 0402 Pkg. 12 pF Capacitor, 0402 Pkg. 2.2 μF Capacitor, Tantalum 47 nH Inductor, 0603 Pkg. 40 nH Inductor, 0402 Pkg. 4.3 nH Inductor, 0402 Pkg. 5.1 nH Inductor, 0402 Pkg. 5.1 Ohm Resistor, 0402 Pkg. HMC453ST89 / HMC453ST89E Linear Amp 110955 Evaluation PCB, 10 mils
[1]
The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
5 - 331
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
5
AMPLIFIERS - SMT
470 MHz Application Circuit
This circuit was used to specify the performance for 450-496 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application.
TL1 Impedance Physical Length Electrical Length 50 Ohm 0.16” 4°
TL2 50 Ohm 0.04” 1°
TL3 50 Ohm 0.06” 2°
TL4 50 Ohm 0.21” 6°
TL5 50 Ohm 0.04” 1°
TL6 50 Ohm 0.10” 3°
Recommended Component Values C1 C2, C3 C4 C5 C6 C7 C8 L1 L2 L3 L4 R1 10 pF 6.8 pF 12 pF 39 pF 100 pF 5.6 pF 2.2 μF 47 nH 40 nH 4.7 nH 2.4 nH 5.1 Ohm
PCB Material: 10 mil Rogers 4350, Er = 3.48
5 - 332
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
470 MHz Evaluation PCB
5
AMPLIFIERS - SMT
List of Materials for Evaluation PCB 110961-470
Item J1 - J2 J3 C1 C2, C3 C4 C5 C6 C7 C8 L1 L2 L3 L4 R1 U1 PCB [2] Description PCB Mount SMA Connector 2 mm DC Header 10 pF Capacitor, 0402 Pkg. 6.8 pF Capacitor, 0402 Pkg. 12 pF Capacitor, 0402 Pkg. 39 pF Capacitor, 0402 Pkg. 100 pF Capacitor, 0402 Pkg. 5.6 pF Capacitor, 0402 Pkg. 2.2 μF Capacitor, Tantalum 47 nH Inductor, 0603 Pkg. 40 nH Inductor, 0402 Pkg. 4.7 nH Inductor, 0402 Pkg. 2.4 nH Inductor, 0402 Pkg. 5.1 Ohm Resistor, 0402 Pkg. HMC453ST89 / HMC453ST89E Linear Amp 110955 Evaluation PCB, 10 mils
[1]
The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
5 - 333
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
5
AMPLIFIERS - SMT
900 MHz Application Circuit
This circuit was used to specify the performance for 810-960 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application.
TL1 Impedance Physical Length Electrical Length 50 Ohm 0.25” 13°
TL2 50 Ohm 0.08” 4°
TL3 50 Ohm 0.31” 16°
Recommended Component Values C1 C2 C3 C4 C5 C6 C7 L1 R1 5 pF 3.3 pF 2.7 pF 8.2 pF 12 pF 100 pF 2.2 μF 15 nH 5.1 Ohm
PCB Material: 10 mil Rogers 4350, Er = 3.48
5 - 334
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
900 MHz Evaluation PCB
5
AMPLIFIERS - SMT
List of Materials for Evaluation PCB 110387-900 [1]
Item J1 - J2 J3 C1 C2 C3 C4 C5 C6 C7 L1 R1 U1 PCB [2] Description PCB Mount SMA Connector 2 mm DC Header 5 pF Capacitor, 0402 Pkg. 3.3 pF Capacitor, 0402 Pkg. 2.7 pF Capacitor, 0402 Pkg. 8.2 pF Capacitor, 0402 Pkg. 12 pF Capacitor, 0402 Pkg. 100 pF Capacitor, 0402 Pkg. 2.2 μF Capacitor, Tantalum 15 nH Inductor, 0603 Pkg. 5.1 Ohm Resistor, 0402 Pkg. HMC453ST89 / HMC453ST89E Linear Amp 110385 Evaluation PCB, 10 mils
The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
5 - 335
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
5
AMPLIFIERS - SMT
1900 MHz Application Circuit
This circuit was used to specify the performance for 1710-1990 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application.
TL1 Impedance Physical Length Electrical Length 50 Ohm 0.04” 4°
TL2 50 Ohm 0.07” 8°
Recommended Component Values C1 C2 C3 C4 C5 C6 L1 L2 R1 1.2 pF 1.5 pF 3.9 pF 15 pF 100 pF 2.2 μF 20 nH 12 nH 5.1 Ohm
PCB Material: 10 mil Rogers 4350, Er = 3.48
5 - 336
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
1900 MHz Evaluation PCB
5
AMPLIFIERS - SMT
List of Materials for Evaluation PCB 108718-1900
Item J1 - J2 J3 C1 C2 C3 C4 C5 C6 L1 L2 R1 U1 PCB [2] Description PCB Mount SMA Connector 2 mm DC Header 1.2 pF Capacitor, 0402 Pkg. 1.5 pF Capacitor, 0402 Pkg. 3.9 pF Capacitor, 0402 Pkg. 15 pF Capacitor, 0402 Pkg. 100 pF Capacitor, 0402 Pkg. 2.2 μF Capacitor, Tantalum 20 nH Inductor, 0402 Pkg. 12 nH Inductor, 0402 Pkg. 5.1 Ohm Resistor, 0402 Pkg. HMC453ST89 / HMC453ST89E Linear Amp 108716 Evaluation PCB, 10 mils
[1]
The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
5 - 337
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
5
AMPLIFIERS - SMT
2100 MHz Application Circuit
This circuit was used to specify the performance for 2010-2170 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application.
Note: C2 and C3 should be placed as close to pins as possible.
TL1 Impedance Physical Length Electrical Length 50 Ohm 0.04” 5° TL2 50 Ohm 0.04” 5° TL3 50 Ohm 0.04” 5° Recommended Component Values C1 C2 C3 C4 C5 C6 C7 L1 L2 R1 0.8 pF 1 pF 3.3 pF 15 pF 100 pF 0.5 pF 2.2 μF 20 nH 12 nH 5.1 Ohm
PCB Material: 10 mil Rogers 4350, Er = 3.48
5 - 338
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz
2100 MHz Evaluation PCB
5
AMPLIFIERS - SMT
List of Materials for Evaluation PCB 109942-2100
Item J1 - J2 J3 C1 C2 C3 C4 C5 C6 C7 L1 L2 R1 U1 PCB [2] Description PCB Mount SMA Connector 2 mm DC Header 0.8 pF Capacitor, 0402 Pkg. 1 pF Capacitor, 0402 Pkg. 3.3 pF Capacitor, 0402 Pkg. 15 pF Capacitor, 0402 Pkg. 100 pF Capacitor, 0402 Pkg. 0.5 pF Capacitor, 0402 Pkg. 2.2 μF Capacitor, Tantalum 20 nH Inductor, 0402 Pkg. 12 nH Inductor, 0402 Pkg. 5.1 Ohm Resistor, 0402 Pkg. HMC453ST89 / HMC453ST89E Linear Amp 109940 Evaluation PCB, 10 mils
[1]
The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
5 - 339
工商网监
湘ICP备2023018690号
