HMC474MP86E

HMC474MP86 / 474MP86E v01.0705 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6.0 GHz 5 AMPLIFIERS - SMT Designer’s Kit Available Typical Applications The HMC474MP86 & HMC474MP86E is an ideal RF/IF gain block for: • Cellular / PCS / 3G • Fixed Wireless & WLAN • CATV, Cable Modem & DBS • Microwave Radio & Test Equipment Features Gain: 15.5 dB P1dB Output Power: +8 dBm Output IP3: +22 dBm Cascadable 50 Ohm I/Os Single Supply: +3V to +10V Included in the HMC-DK001 Designer’s Kit Functional Diagram General Description The HMC474MP86 & HMC474MP86E are general purpose SiGe Heterojunction Bipolar Transistor (HBT) Gain Block MMIC SMT amplifiers covering DC to 6 GHz. This Micro-P packaged amplifier can be used as a cascadable 50 Ohm RF/IF gain stage with up to +10 dBm output power. The HMC474MP86 & HMC474MP86E offer 15.5 dB of gain with a +22 dBm output IP3 at 850 MHz while requiring only 25 mA from a single positive supply. The Darlington feedback pair used results in reduced sensitivity to normal process variations and excellent gain stability over temperature while requiring a minimal number of external bias components. Electrical Specifications, Vs= 5.0 V, Rbias= 110 Ohm, TA = +25° C Parameter DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 4.0 - 5.0 GHz 5.0 - 6.0 GHz DC - 6.0 GHz DC - 1.0 GHz 1.0 - 4.0 GHz 4.0 - 5.0 GHz 5.0 - 6.0 GHz DC - 5.0 GHz 5.0 - 6.0 GHz DC - 4.0 GHz 0.5 - 4.0 GHz 4.0 - 5.0 GHz 5.0 - 6.0 GHz 0.5 - 4.0 GHz 4.0 - 5.0 GHz 5.0 - 6.0 GHz DC - 5.0 GHz 5.0 - 6.0 GHz 5 4 3 Min. 13 12 10 9 8 7 Typ. 15.5 14 12 11 10 9 0.01 15 16 19 16 17 13 17 8 7 6 22 20 17 3 3.4 25 0.015 Max. Units dB dB dB dB dB dB dB/ °C dB dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm dB dB mA Gain Gain Variation Over Temperature Input Return Loss Output Return Loss Reverse Isolation Output Power for 1 dB Compression (P1dB) Output Third Order Intercept (IP3) (Pout= 0 dBm per tone, 1 MHz spacing) Noise Figure Supply Current (Icq) Note: Data taken with broadband bias tee on device output. 5 - 420 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC474MP86 / 474MP86E v01.0705 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6.0 GHz Broadband Gain & Return Loss 20 15 10 RESPONSE (dB) Gain vs. Temperature 20 18 16 14 GAIN (dB) 5 AMPLIFIERS - SMT 5 - 421 5 0 -5 -10 S21 S11 S22 12 10 8 6 4 +25 C +85 C -40 C -15 -20 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) 2 0 0 1 2 3 4 5 6 FREQUENCY (GHz) Input Return Loss vs. Temperature 0 +25 C +85 C -40 C Output Return Loss vs. Temperature 0 -5 RETURN LOSS (dB) -5 RETURN LOSS (dB) +25 C +85 C -40 C -10 -10 -15 -15 -20 -20 -25 0 1 2 3 4 5 6 FREQUENCY (GHz) -25 0 1 2 3 4 5 6 FREQUENCY (GHz) Reverse Isolation vs. Temperature 0 REVERSE ISOLATION (dB) Noise Figure vs. Temperature 6 5 NOISE FIGURE (dB) 4 3 2 1 0 +25 C +85 C -40 C -5 +25 C +85 C -40 C -10 -15 -20 -25 0 1 2 3 4 5 6 FREQUENCY (GHz) 0 1 2 3 4 5 6 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC474MP86 / 474MP86E v01.0705 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6.0 GHz 5 AMPLIFIERS - SMT P1dB vs. Temperature 12 10 8 6 4 2 0 0 1 2 3 4 5 6 FREQUENCY (GHz) +25 C +85 C -40 C Psat vs. Temperature 12 10 8 6 4 2 0 0 1 2 3 4 5 6 FREQUENCY (GHz) +25 C +85 C -40 C P1dB (dBm) Output IP3 vs. Temperature 30 Gain, Power & OIP3 vs. Supply Voltage for Constant Icc= 25 mA @ 850 MHz Gain (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 32 28 24 20 16 12 8 4 0 3 4 5 6 7 8 9 10 Vs (Vdc) Gain P1dB Psat OIP3 25 OIP3 (dBm) 20 15 +25 C +85 C -40 C 10 5 0 1 2 3 4 5 6 FREQUENCY (GHz) Icc vs. Vcc Over Temperature for Fixed Vs= 5V, RBIAS= 110 Ohms 28 27 26 Icc (mA) 25 24 23 -40 C 22 21 20 2 2.1 2.2 2.3 Vcc (Vdc) 2.4 2.5 2.6 +25 C +85 C Gain, Power & OIP3 vs. Supply Voltage for Rs = 110 Ohms @ 850 MHz Gain (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 32 28 24 20 16 12 8 4 0 4.75 Gain P1dB Psat OIP3 Psat (dBm) 5 Vs (Vdc) 5.25 5 - 422 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC474MP86 / 474MP86E v01.0705 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6.0 GHz Absolute Maximum Ratings Collector Bias Voltage (Vcc) Collector Bias Current (Icc) RF Input Power (RFin)(Vcc = +2.4 Vdc) Junction Temperature Continuous Pdiss (T = 85 °C) (derate 4.3 mW/°C above 85 °C) Thermal Resistance (junction to lead) Storage Temperature Operating Temperature ESD Sensitivity (HBM) +6.0 Vdc 35 mA +5 dBm 150 °C 0.280 W 232 °C/W -65 to +150 °C -40 to +85 °C Class 1B 5 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 5. THE MICRO-P PACKAGE IS DIMENSIONALLY COMPATABLE WITH THE “MICRO-X PACKAGE” Package Information Part Number HMC474MP86 HMC474MP86E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking H474 H474 [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 423 AMPLIFIERS - SMT HMC474MP86 / 474MP86E v01.0705 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6.0 GHz 5 AMPLIFIERS - SMT Pin Descriptions Pin Number Function Description Interface Schematic 1 RFIN This pin is DC coupled. An off chip DC blocking capacitor is required. 3 RFOUT RF output and DC Bias (Vcc) for the output stage. 2, 4 GND These pins must be connected to RF/DC ground. Application Circuit Recommended Bias Resistor Values for Icc= 25 mA, Rbias= (Vs - Vcc) / Icc Supply Voltage (Vs) RBIAS VALUE RBIAS POWER RATING 3V 30 Ω 1/8 W 5V 110 Ω 1/8 W 6V 150 Ω 1/4 W 8V 240 Ω 1/2 W 10V 300 Ω 1/2 W Note: 1. External blocking capacitors are required on RFIN and RFOUT. 2. RBIAS provides DC bias stability over temperature. Recommended Component Values for Key Application Frequencies Frequency (MHz) Component 50 L1 C1, C2 270 nH 0.01 μF 900 56 nH 100 pF 1900 18 nH 100 pF 2200 18 nH 100 pF 2400 15 nH 100 pF 3500 8.2 nH 100 pF 5200 6.8 nH 100 pF 5500 3.3 nH 100 pF 5 - 424 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC474MP86 / 474MP86E v01.0705 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6.0 GHz Evaluation PCB 5 AMPLIFIERS - SMT List of Materials for Evaluation PCB 107179 Item J1 - J2 J3 - J4 C1, C2 C3 C4 C5 R1 L1 U1 PCB [2] Description PCB Mount SMA Connector DC Pin Capacitor, 0402 Pkg. 100 pF Capacitor, 0402 Pkg. 1000 pF Capacitor, 0603 Pkg. 2.2 μF Capacitor, Tantalum Resistor, 1210 Pkg. Inductor, 0603 Pkg. HMC474MP86 / HMC474MP86E 107087 Evaluation PCB [1] The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 425