HMC481ST89E

HMC481ST89 / 481ST89E v02.0710 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Typical Applications Features P1dB Output Power: +19 dBm Gain: 20 dB Output IP3: +33 dBm Cascadable 50 Ohm I/Os Single Supply: +6V to +12V Industry Standard SOT89 Package Included in the HMC-DK001 Designer’s Kits 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT The HMC481ST89 / HMC481ST89E is an ideal RF/IF gain block & LO or PA driver for: • Cellular / PCS / 3G • Fixed Wireless & WLAN • CATV, Cable Modem & DBS • Microwave Radio & Test Equipment Functional Diagram General Description The HMC481ST89 & HMC481ST89E are SiGe Heterojunction Bipolar Transistor (HBT) Gain Block MMIC SMT amplifiers covering DC to 5 GHz. Packaged in an industry standard SOT89, the amplifier can be used as a cascadable 50 Ohm RF/IF gain stage as well as a LO or PA driver with up to +21 dBm output power. The HMC481ST89(E) offer 20 dB of gain with a +33 dBm output IP3 at 1 GHz while requiring only 79 mA from a single positive supply. The Darlington feedback pair used results in reduced sensitivity to normal process variations and excellent gain stability over temperature while requiring a minimal number of external bias components. Electrical Specifi cations, Vs= 8.0 V, Rbias= 39 Ohm, TA = +25° C Parameter DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 4.0 - 5.0 GHz DC - 5 GHz DC - 1.0 GHz 1.0 - 5.0 GHz DC - 1.0 GHz 1.0 - 4.0 GHz 4.0 - 5.0 GHz DC - 5 GHz 0.5 - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 4.0 - 5.0 GHz 0.5 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 4.0 - 5.0 GHz DC - 4 GHz 4.0 - 5.0 GHz 16 15 13 11 9 Min. 18 15.5 13 11 9 Typ. 20 17.5 15 13 11 0.008 12 15 17 27 23 18 19 18 16 14 12 33 30 27 25 3.5 4.0 79 Max. Units dB dB dB dB dB dB/ °C dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm dBm dBm dBm dB dB mA Gain Gain Variation Over Temperature Input Return Loss Output Return Loss Reverse Isolation 0.016 Output Power for 1 dB Compression (P1dB) Output Third Order Intercept (IP3) (Pout= 0 dBm per tone, 1 MHz spacing) Noise Figure Supply Current (Icq) Note: Data taken with broadband bias tee on device output. 8 - 134 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC481ST89 / 481ST89E v02.0710 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Broadband Gain & Return Loss 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 0 1 2 3 4 Gain vs. Temperature 24 20 8 +25C +85C -40C RESPONSE (dB) 12 8 4 0 5 6 7 8 0 1 2 3 4 5 6 FREQUENCY (GHz) FREQUENCY (GHz) Input Return Loss vs. Temperature 0 INPUT RETURN LOSS (dB) +25C +85C -40C Output Return Loss vs. Temperature 0 -5 -10 RETURN LOSS (dB) -10 +25C +85C -40C -20 -15 -20 -30 -25 0 1 2 3 4 5 6 FREQUENCY (GHz) -40 0 1 2 3 4 5 6 FREQUENCY (GHz) Reverse Isolation vs. Temperature 0 REVERSE ISOLATION (dB) -5 -10 -15 -20 -25 -30 0 1 2 3 4 5 6 FREQUENCY (GHz) +25C +85C -40C Noise Figure vs. Temperature 10 +25C +85C -40C 8 NOISE FIGURE (dB) 6 4 2 0 0 1 2 3 4 5 6 FREQUENCY (GHz) F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8 - 135 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT GAIN (dB) S21 S11 S22 16 HMC481ST89 / 481ST89E v02.0710 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz P1dB vs. Temperature Psat vs. Temperature 24 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT P1dB (dBm) 24 20 Psat (dBm) +25C +85C -40C 20 16 16 12 12 +25C +85C -40C 8 8 4 0 1 2 3 4 5 6 FREQUENCY (GHz) 4 0 1 2 3 4 5 6 FREQUENCY (GHz) Output IP3 vs. Temperature 36 33 30 IP3 (dBm) 27 24 21 18 0 1 2 3 4 5 6 FREQUENCY (GHz) +25C +85C -40C Gain, Power & OIP3 vs. Supply Voltage for Constant Icc= 79 mA @ 850 MHz Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) 36 30 24 18 12 6 0 6 7 8 9 Vs (Vdc) 10 11 12 Gain P1dB Psat IP3 Vcc vs. Icc Over Temperature for Fixed Vs= 8V, RBIAS= 39 Ohms 88 86 84 82 Icc (mA) 80 78 76 74 72 70 68 66 4.5 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 -40 C +25 C +85 C Vcc (Vdc) 8 - 136 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC481ST89 / 481ST89E v02.0710 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Absolute Maximum Ratings Collector Bias Voltage (Vcc) RF Input Power (RFIN)(Vcc = +5 Vdc) Junction Temperature Continuous Pdiss (T = 85 °C) (derate 16.3 mW/°C above 85 °C) Thermal Resistance (junction to lead) Storage Temperature Operating Temperature ESD Sensitivity (HBM) +6.0 Vdc +10 dBm 150 °C 1.06 W 61.4 °C/W -65 to +150 °C -40 to +85 °C Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 - 137 Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: MOLDING COMPOUND MP-180S OR EQUIVALENT. 2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING. 3. LEAD PLATING: 100% MATTE TIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS] 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC481ST89 HMC481ST89E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H481 XXXX H481 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC481ST89 / 481ST89E v02.0710 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Pin Descriptions 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT Pin Number Function Description Interface Schematic 1 RFIN This pin is DC coupled. An off chip DC blocking capacitor is required. 3 RFOUT RF output and DC Bias (Vcc) for the output stage. 2, 4 GND These pins and package bottom must be connected to RF/ DC ground. Application Circuit Recommended Bias Resistor Values for Icc= 79 mA, Rbias= (Vs - Vcc) / Icc Supply Voltage (Vs) RBIAS VALUE RBIAS POWER RATING 6V 11 Ω 1/8 W 8V 39 Ω 1/4 W 10V 62 Ω 1/2 W 12V 91 Ω 1W Note: 1. External blocking capacitors are required on RFIN and RFOUT. 2. RBIAS provides DC bias stability over temperature. Recommended Component Values for Key Application Frequencies Frequency (MHz) Component 50 L1 C1, C2 270 nH 0.01 μF 900 56 nH 100 pF 1900 18 nH 100 pF 2200 18 nH 100 pF 2400 15 nH 100 pF 3500 8.2 nH 100 pF 5000 6.8 nH 100 pF 8 - 138 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC481ST89 / 481ST89E v02.0710 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Evaluation PCB 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 - 139 List of Materials for Evaluation PCB 108324 [1] Item J1 - J2 J3 - J4 C1, C2 C3 C4 C5 R1 L1 U1 PCB [2] Description PCB Mount SMA Connector DC Pin Capacitor, 0402 Pkg. 100 pF Capacitor, 0402 Pkg. 1000 pF Capacitor, 0603 Pkg. 2.2 μF Capacitor, Tantalum Resistor, 1210 Pkg. Inductor, 0603 Pkg. HMC481ST89 / HMC481ST89E 107368 Evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com