HMC485MS8G

v00.0503 MICROWAVE CORPORATION HMC485MS8G Features +34 dBm Input IP3 Conversion Loss: 9 dB Low LO Drive: -2 to +4 dBm Single Positive Supply: 5V @ 45 mA Ultra Small MSOP Package: 14.8mm2 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Typical Applications High Dynamic Range Infrastructure: • GSM, GPRS & EDGE • CDMA & W-CDMA • Cable Modem Termination Systems Functional Diagram General Description The HMC485MS8G is a high dynamic range passive MMIC mixer with an integrated LO amplifier in a plastic surface mount 8 lead Mini Small Outline Package (MSOP) covering 1.7 to 2.2 GHz. Excellent input IP3 performance of +34 dBm for down conversion and +27 dBm for up conversion is provided for 2.5G & 3G GSM/CDMA based UMTS or PCS applications at an LO drive of 0 dBm. With an input 1 dB compression of +19 dBm, the RF port will accept a wide range of input signal levels. Conversion loss is 9.2 dB typical. The 50 to 300 MHz IF frequency response will satisfy many UMTS/PCS transmit or receive frequency plans configured for low side LO. The HMC485MS8G input IP3 performance coupled with its high P1dB rivals traditional active FET mixers while offering a much smaller 14.8mm2 standard IC footprint. 12 MIXERS - SMT Electrical Specifications, TA = +25°C, LO = 0 dBm, IF = 200 MHz*, Vdd= 5V Parameter Frequency Range, RF Frequency Range, LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation IP3 (Input) 1 dB Gain Compression (Input) LO Input Drive Level (Typical) Supply Current 27 16 Min. Typ. 1.7 - 1.8 1.4 - 1.75 50 - 300 9.8 9.8 12 7 31 19 -2 to +4 45 29 17 11 Max. Min. Typ. 1.8 - 2.0 1.5 - 1.95 50 - 300 9.2 9.2 8 10 34 20 -2 to +4 45 29 17 10.5 Max. Min. Typ. 2.0 - 2.2 1.7 - 2.15 50 - 300 9 9 5 13 33 21 -2 to +4 45 10 Max. Units GHz GHz MHz dB dB dB dB dBm dBm dBm mA *Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 270 v00.0503 MICROWAVE CORPORATION HMC485MS8G HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Conversion Gain vs. Temperature @ LO = 0 dBm 0 Isolation @ LO = 0 dBm 0 CONVERSION GAIN (dB) -5 -5 ISOLATION (dB) -10 -10 -15 RF TO IF LO TO RF LO TO IF -15 + 25C + 85C - 40C -20 -20 1.7 1.8 1.9 2 2.1 RF FREQUENCY (GHz) 2.2 2.3 -25 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 12 MIXERS - SMT Conversion Gain vs. LO Drive 0 Return Loss @ LO = 0 dBm 0 -5 RF LO CONVERSION GAIN (dB) RETURN LOSS (dB) -5 -10 -15 -20 -25 -30 -35 -40 -10 -15 LO = -4dBm LO = -2dBm LO = 0dBm LO = +2dBm LO = +4dBm -20 1.7 1.8 1.9 2 2.1 RF FREQUENCY (GHz) 2.2 2.3 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 Upconverter Performance Conversion Gain @ LO = 0 dBm 0 IF Bandwidth @ LO = 0 dBm 0 CONVERSION GAIN (dB) -5 RESPONSE (dB) -5 CONVERSION GAIN RETURN LOSS -10 -10 -15 -15 -20 1.7 1.8 1.9 2 2.1 2.2 2.3 RF FREQUENCY (GHz) -20 0 50 100 150 200 250 300 350 IF FREQUENCY (MHz) 400 450 500 *Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 271 v00.0503 MICROWAVE CORPORATION HMC485MS8G HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Input IP3 vs. Temperature @ LO= 0 dBm 40 Input IP3 vs. LO Drive 40 35 INPUT IP3 (dBm) INPUT IP3 (dBm) 35 30 30 LO = -2dBm LO = 0dBm LO = +2dBm LO = +4dBm 25 + 25C + 85C - 40C 25 20 20 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 12 MIXERS - SMT 1.7 Input IP2 vs. Temperature @ LO= 0 dBm 45 Input IP2 vs. LO Drive @ IF= 200 MHz 45 40 INPUT IP2 (dBm) INPUT IP2 (dBm) 40 35 35 30 + 25C - 40C + 85C 30 - 2dBm 0dBm + 2dBm + 4dBm 25 25 20 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 20 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 Input P1dB vs. Temperature @ LO= 0 dBm 25 24 23 INPUT P1dB (dBm) Upconverter IP3 vs. LO Drive, IF= 200 MHz 40 - 2dBm 0dBm - 2dBm - 4dBm 35 21 20 19 18 17 16 15 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 20 1.7 1.8 + 25C + 85C - 40C INPUT IP3 (dBm) 22 30 25 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 12 - 272 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v00.0503 MICROWAVE CORPORATION HMC485MS8G HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Input IP3 vs. LO Drive, IF= 70 MHz 40 Input IP3 vs. LO Drive, IF= 120 MHz 40 35 INPUT IP3 (dBm) INPUT IP3 (dBm) 35 30 30 25 - 2dBm 0 dBm + 2dBm + 4dBm 25 - 2dBm 0 dBm + 2dBm + 4dBm 20 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 20 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 12 MIXERS - SMT Input IP3 vs. LO Drive, IF= 170 MHz 40 Input IP3 vs. LO Drive, IF= 247 MHz 40 35 INPUT IP3 (dBm) INPUT IP3 (dBm) 35 30 30 - 2dbm 0 dBm + 2dbm + 4dBm 25 - 2dBm 0 dBm + 2dBm + 4dBm 25 20 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 20 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 Input IP3 vs. LO Drive, IF= 297 MHz 40 35 INPUT IP3 (dBm) 30 - 2dBm 0 dBm + 2dBm + 4dBm 25 20 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 273 v00.0503 MICROWAVE CORPORATION HMC485MS8G HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz MxN Spurious Outputs nLO mRF 0 1 2 3 4 0 xx 4 54 75 78 1 -1. 0 69 82 82 2 19 30 39 83 83 3 15 25 56 74 83 4 15 44 55 72 82 LO Freq GHz 1.5 1.6 1.7 1.8 1.9 2 1 19 17 14 10 8 6 Harmonics of LO nLO Spur at RF Port 2 15 15 14 15 20 20 3 35 33 29 25 22 22 4 24 24 23 24 23 24 RF Freq = 1.9 GHz @ 0dBm LO Freq = 1.7 GHz @ 0 dBm All values in dBc Relative to the IF power level. LO power = 0dBm All values in dBc below input LO level measured at RF port. 12 MIXERS - SMT 12 - 274 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v00.0503 MICROWAVE CORPORATION HMC485MS8G HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Absolute Maximum Ratings RF/IF Input LO Drive Bias Supply (Vdd) Channel Temperature Continuous Pdiss (T = 85°C) (Derate 13.2 mW/°C above 85°C) Storage Temperature Operating Temperature IF DC Current +27 dBm +10 dBm +7 Vdc 150 °C 0.85 W -65 to +150 °C -40 to +85 °C ±40 mA 12 MIXERS - SMT NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEAD MATERIAL: COPPER ALLOY 3 LEAD PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS] 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO THE PCB RF GROUND Outline Drawing For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 275 v00.0503 MICROWAVE CORPORATION HMC485MS8G HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Pin Descriptions Pin Number Function Description Interface Schematic 1 LO This pin is AC coupled & matched to 50 Ohms from 1.4 to 2.2 GHz. 2 N/C Not connected. 12 MIXERS - SMT 3, 6, 7 GND This pin must be connected to RF ground. 4 Vdd Power supply for LO amplifier. An external RF bypass capacitor is required. 5 IF Port This pin is DC coupled. For applications not requiring operation to DC this port should be DC blocked externally using a series capacitor. Choose value of capacitor to pass IF frequency desired. For operation to DC, this pin must not sink/source more than 40 mA of current or failure may result. 8 RF Port This pin is DC coupled & matched to 50 Ohm from 1.7 to 2.2 GHz 12 - 276 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v00.0503 MICROWAVE CORPORATION HMC485MS8G HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Evaluation PCB 12 MIXERS - SMT List of Material Item J1 - J3 J4 - J5 C1 U1 PCB* Description PC Mount SMA RF Connector DC Pin 10,000 pF Chip Capacitor, 0603 Pkg. HMC485MS8G Mixer 104813 Evaluation Board, 1.0” x 1.0” The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. * Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 277