HMC498LC4
v02.1208
GaAs PHEMT MEDIUM POWER AMPLIFIER, 17 - 24 GHz
Typical Applications
The HMC498LC4 is ideal for use as a LNA or Driver amplifier for: • Point-to-Point Radios • Point-to-Multi-Point Radios & VSAT
Features
Output IP3: +36 dBm Saturated Power: +26 dBm @ 23% PAE Gain: 22 dB +5V @ 250 mA Supply 50 Ohm Matched Input/Output RoHS Compliant 4x4 mm SMT Package
11
LINEAR & POWER AMPLIFIERS - SMT
• Test Equipment & Sensors • Military End-Use
Functional Diagram
General Description
The HMC498LC4 is a high dynamic range GaAs PHEMT MMIC Medium Power Amplifier housed in a leadless “Pb free” SMT package. Operating from 17 to 24 GHz, the amplifier provides 22 dB of gain, +26 dBm of saturated power and 23% PAE from a +5V supply voltage. Noise figure is 4 dB while output IP3 is +36 dBm typical enabling the HMC498LC4 to function as a low noise front end as well as a driver amplifier. The RF I/Os are DC blocked and matched to 50 Ohms for ease of use. The HMC498LC4 eliminates the need for wire bonding, allowing use of surface mount manufacturing techniques.
Electrical Specifi cations, TA = +25° C, Vdd1, 2, 3 = 5V, Idd = 250 mA*
Parameter Frequency Range Gain Gain Variation Over Temperature Input Return Loss Output Return Loss Output Power for 1 dB Compression (P1dB) Saturated Output Power (Psat) Output Third Order Intercept (IP3) Noise Figure Supply Current (Idd)(Vdd = +5V, Vgg = -0.8V Typ.) 22 18 Min. Typ. 17 - 19 22 0.02 13 15 25 26.5 35 4.0 250 21.5 0.03 20 Max. Min. Typ. 19 - 23 22.5 0.02 13 15 24.5 25.5 36 4.0 250 22.5 0.03 18 Max. Min. Typ. 23 - 24 21 0.02 10 20 25.5 26.5 35.5 4.5 250 0.03 Max. Units GHz dB dB/ °C dB dB dBm dBm dBm dB mA
* Adjust Vgg between -2 to 0V to achieve Idd = 250 mA typical.
11 - 282
F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC498LC4
v02.1208
GaAs PHEMT MEDIUM POWER AMPLIFIER, 17 - 24 GHz
Broadband Gain & Return Loss
25
Gain vs. Temperature
26
15 22 RESPONSE (dB) 5 GAIN (dB)
S21 S11 S22
18
-5
14 -15
+25 C +85 C -40 C
11
22 23 24 25
-25 12 14 16 18 20 22 24 26 28 FREQUENCY (GHz)
10 16 17 18 19 20 21 FREQUENCY (GHz)
Input Return Loss vs. Temperature
0
Output Return Loss vs. Temperature
0
RETURN LOSS (dB)
RETURN LOSS (dB)
-5
+25 C +85 C -40 C
-5
+25 C +85 C -40 C
-10
-10
-15
-15
-20
-20 16 17 18 19 20 21 22 23 24 25 FREQUENCY (GHz)
-25 16 17 18 19 20 21 22 23 24 25 FREQUENCY (GHz)
P1dB vs. Temperature
30
Psat vs. Temperature
30
26 P1dB (dBm) Psat (dBm)
26
22
+25 C +85 C -40 C
22
18
18
+25 C +85 C -40 C
14
14
10 16 17 18 19 20 21 22 23 24 25 FREQUENCY (GHz)
10 16 17 18 19 20 21 22 23 24 25 FREQUENCY (GHz)
F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
11 - 283
LINEAR & POWER AMPLIFIERS - SMT
HMC498LC4
v02.1208
GaAs PHEMT MEDIUM POWER AMPLIFIER, 17 - 24 GHz
Output IP3 vs. Temperature
40
Noise Figure vs. Temperature
10 9
+25 C +85 C -40 C
36 NOISE FIGURE (dB) 23 24 25
8 7 6 5 4 3 2 1
IP3 (dBm)
32
+25 C +85 C -40 C
11
LINEAR & POWER AMPLIFIERS - SMT
28
24
20 16 17 18 19 20 21 22 FREQUENCY (GHz)
0 16 17 18 19 20 21 22 23 24 25 FREQUENCY (GHz)
Gain, Power & OIP3 vs. Supply Voltage @ 23 GHz
Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) 40 36
Reverse Isolation vs. Temperature
0 -10 ISOLATION (dB) -20 -30 -40 -50 -60
32
28
Gain P1dB Psat IP3
+25 C +85 C -40 C
24
20 4.5
5 Vdd Supply Voltage (Vdc)
5.5
-70 16 17 18 19 20 21 22 23 24 25 FREQUENCY (GHz)
Power Compression @ 18 GHz
30 Pout (dBm), GAIN (dB), PAE (%) 25 20 15 10 5 0 -10
Pout (dBm) Gain (dB) PAE (%)
Power Compression @ 23 GHz
30 Pout (dBm), GAIN (dB), PAE (%) 25 20 15 10 5 0 -10
Pout (dBm) Gain (dB) PAE (%)
-8
-6
-4
-2
0
2
4
6
8
10
-8
-6
-4
-2
0
2
4
6
8
10
INPUT POWER (dBm)
INPUT POWER (dBm)
11 - 284
F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC498LC4
v02.1208
GaAs PHEMT MEDIUM POWER AMPLIFIER, 17 - 24 GHz
Absolute Maximum Ratings
Drain Bias Voltage (Vdd1, Vdd2, Vdd3) Gate Bias Voltage (Vgg) RF Input Power (RFIN)(Vdd = +5Vdc) Channel Temperature Continuous Pdiss (T= 85 °C) (derate 18 mW/°C above 85 °C) Thermal Resistance (channel to ground paddle) Storage Temperature Operating Temperature ESD Sensitivity (HBM) +5.5 Vdc -4.0 to 0 Vdc +10 dBm 175 °C 1.62 W 55.6 °C/W -65 to +150 °C
Typical Supply Current vs. Vdd
Vdd (Vdc) +4.5 +5.0 +5.5 Idd (mA) 239 250 262
Note: Amplifi er will operate over full voltage ranges shown above. Vgg adjusted to achieve Idd= 250 mA at +5V.
11
LINEAR & POWER AMPLIFIERS - SMT
11 - 285
-40 to +85 °C Class 1A
ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA. 2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL. 3. DIMENSIONS ARE IN INCHES (MILLIMETERS). 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK, OR LASER MARK LOCATED APPROX. AS SHOWN. 6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C – 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC498LC4
v02.1208
GaAs PHEMT MEDIUM POWER AMPLIFIER, 17 - 24 GHz
Pin Descriptions
Pin Number 1, 5 - 8, 10 - 14, 18, 20, 22, 24 Function N/C Description No connection required. These pins may be connected to RF/DC ground without affecting performance. Package bottom has an exposed metal paddle that must also be connected to RF/DC ground. This pin is AC coupled and matched to 50 Ohms. Interface Schematic
2, 4, 15, 17
GND
11
LINEAR & POWER AMPLIFIERS - SMT
3
RFIN
9
Vgg
Gate control for amplifier. Adjust to achieve Id of 250 mA. Please follow “MMIC Amplifier Biasing Procedure” Application Note. External bypass capacitors of 100 pF, 1000 pF and 2.2 μF are required.
16
RFOUT
This pin is AC coupled and matched to 50 Ohms.
23, 21, 19
Vdd1, Vdd2, Vdd3
Power Supply Voltage for the amplifier. External bypass capacitors of 100 pF, 1000pF, and 2.2 μF are required.
11 - 286
F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC498LC4
v02.1208
GaAs PHEMT MEDIUM POWER AMPLIFIER, 17 - 24 GHz
Evaluation PCB
11
LINEAR & POWER AMPLIFIERS - SMT
11 - 287
List of Materials for Evaluation PCB 108537 [1]
Item J1, J2 J3 - J8 C1 - C4 C5 - C8 C9 - C12 U1 PCB [2] Description 2.92 mm PC mount K-connector DC Pin 100 pF capacitor, 0402 pkg. 1,000 pF Capacitor, 0603 pkg. 2.2μF Capacitor, Tantalum HMC498LC4 Amplifier 108535 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350.
The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request.
F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com