HMC511LP5

HMC511LP5 / 511LP5E v00.0506 MMIC VCO w/ HALF FREQUENCY OUTPUT 9.05 - 10.15 GHz Typical Applications Low noise MMIC VCO w/Half Frequency, for: • VSAT Radio • Point to Point/Multi-Point Radio • Test Equipment & Industrial Controls • Military End-Use Features Dual Output: Fo = 9.05 - 10.15 GHz Fo/2 = 4.525 - 5.075 GHz Pout: +13 dBm Phase Noise: -115 dBc/Hz @100 kHz Typ. No External Resonator Needed QFN Leadless SMT Package, 25 mm2 Functional Diagram General Description The HMC511LP5 & HMC511LP5E are GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCOs. The HMC511LP5 & HMC511LP5E integrate resonators, negative resistance devices, varactor diodes and feature a half frequency output. The VCO’s phase noise performance is excellent over temperature, shock, and process due to the oscillator’s monolithic structure. Power output is +13 dBm typical from a +5V supply. The voltage controlled oscillator is packaged in a leadless QFN 5x5 mm surface mount package, and requires no external matching components. 11 VCOS & PLOs - SMT Electrical Specifications, TA = +25° C, Vcc = +5V Parameter Frequency Range Power Output SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RFOUT Tune Voltage Supply Current (Icc) (Vcc = +5.0V) Tune Port Leakage Current (Vtune= 13V) Output Return Loss Harmonics/Subharmonics 1/2 2nd 3rd 2 38 15 30 8 15 0.9 Vtune 2 200 265 Fo Fo/2 RFOUT RFOUT/2 +9 +5 -115 13 300 10 Min. Typ. 9.05 - 10.15 4.525 - 5.075 +16 +11 Max. Units GHz GHz dBm dBm dBc/Hz V mA μA dB dBc dBc dBc MHz pp MHz/V MHz/°C Pulling (into a 2.0:1 VSWR) Pushing @ Vtune= 5V Frequency Drift Rate 11 - 126 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC511LP5 / 511LP5E v00.0506 MMIC VCO w/ HALF FREQUENCY OUTPUT 9.05 - 10.15 GHz Frequency vs. Tuning Voltage, T= 25°C 10.6 10.4 10.2 10 9.8 9.6 9.4 9.2 9 8.8 8.6 8.4 8.2 8 7.8 0 1 2 3 4 5 6 OUTPUT FREQUENCY (GHz) Frequency vs. Tuning Voltage, Vcc= +5V 10.6 10.4 10.2 10 9.8 9.6 9.4 9.2 9 8.8 8.6 8.4 8.2 8 7.8 0 1 2 3 4 5 6 7 OUTPUT FREQUENCY (GHz) Vcc=4.75V Vcc=5.0V Vcc=5.25V +25 C +85 C -40 C 7 8 9 10 11 12 13 8 9 10 11 12 13 TUNING VOLTAGE (VOLTS) TUNING VOLTAGE (VOLTS) Sensitivity vs. Tuning Voltage, Vcc= +5V 650 600 550 500 450 400 350 300 250 200 150 100 50 0 0 1 2 3 4 5 6 7 Output Power vs. Tuning Voltage, Vcc= +5V 20 18 OUTPUT POWER (dBm) 16 14 12 10 8 6 4 2 0 +25 C +85 C -40 C 11 VCOS & PLOs - SMT 11 - 127 SENSITIVITY (MHz/V) +25 C +85 C -40 C 8 9 10 11 12 13 0 1 2 3 4 5 6 7 8 9 10 11 12 13 TUNING VOLTAGE (VOLTS) TUNING VOLTAGE (VOLTS) SSB Phase Noise vs. Tuning Voltage 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 -130 1 2 3 4 5 6 SSB PHASE NOISE (dBc/Hz) SSB Phase Noise @ Vtune = +5V 0 SSB PHASE NOISE (dBc/Hz) -20 -40 -60 -80 -100 -120 -140 -160 2 10 +25 C +85 C -40 C 10kHz offset 100kHz offset 7 8 9 10 11 12 13 10 3 10 4 10 5 10 6 TUNING VOLTAGE (VOLTS) OFFSET FREQUENCY (Hz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC511LP5 / 511LP5E v00.0506 MMIC VCO w/ HALF FREQUENCY OUTPUT 9.05 - 10.15 GHz RFOUT/2 Output Power vs. Tuning Voltage, Vcc= +5V 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 0 1 2 3 4 5 6 7 RFOUT/2 Frequency vs. Tuning Voltage, Vcc= +5V 5.4 5.3 5.2 5.1 5 4.9 4.8 4.7 4.6 4.5 4.4 4.3 4.2 4.1 4 3.9 3.8 0 1 2 3 4 5 6 7 OUTPUT FREQUENCY (GHz) +25 C +85 C -40 C OUTPUT POWER (dBm) +25 C +85 C -40 C 8 9 10 11 12 13 8 9 10 11 12 13 TUNING VOLTAGE (VOLTS) TUNING VOLTAGE (VOLTS) 11 VCOS & PLOs - SMT Absolute Maximum Ratings Vcc Vtune Junction Temperature Continuous Pdiss (T=85 °C) (derate 31.5 mW/C above 85 °C Thermal Resistance (junction to ground paddle) Storage Temperature Operating Temperature ESD Sensitivity (HBM) +5.5 Vdc 0 to +15V 135 °C 1.58 W 31.6 °C/W -65 to +150 °C -40 to +85 °C Class 1A Typical Supply Current vs. Vcc Vcc (V) 4.75 5.0 5.25 Icc (mA) 245 265 285 Note: VCO will operate over full voltage range shown above. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 11 - 128 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC511LP5 / 511LP5E v00.0506 MMIC VCO w/ HALF FREQUENCY OUTPUT 9.05 - 10.15 GHz Outline Drawing 11 NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number HMC511LP5 HMC511LP5E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H511 XXXX H511 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 11 - 129 VCOS & PLOs - SMT HMC511LP5 / 511LP5E v00.0506 MMIC VCO w/ HALF FREQUENCY OUTPUT 9.05 - 10.15 GHz Pin Descriptions Pin Number 1-11, 13-18, 20, 22-28, 30-32 Function N/C Description No Connection. These pins may be connected to RF/ DC ground. Performance will not be affected. Interface Schematic 12 RFOUT/2 Half frequency output (AC coupled). 19 RFOUT RF output (AC coupled). 11 21 Vcc Supply Voltage, +5V VCOS & PLOs - SMT 29 VTUNE Control Voltage Input. Modulation port bandwidth dependent on drive source impedance. GND Package bottom has an exposed metal paddle that must be connected to RF/DC ground. 11 - 130 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC511LP5 / 511LP5E v00.0506 MMIC VCO w/ HALF FREQUENCY OUTPUT 9.05 - 10.15 GHz Evaluation PCB 11 VCOS & PLOs - SMT 11 - 131 List of Materials for Evaluation PCB 110227 [1] Item J1 - J3 J4, J5 C1 - C2 C4 - C5 U1 PCB [2] Description PCB Mount SMA RF Connector 2 mm DC Header 100 pF Capacitor, 0402 Pkg. 2.2 μF Tantalum Capacitor HMC511LP5 / HMC511LP5E VCO 110225 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and backside ground paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com