HMC524LC3B_09

HMC524LC3B v02.1208 GaAs MMIC I/Q MIXER 22 - 32 GHz Typical Applications The HMC524LC3B is ideal for: • Point-to-Point Radios Features Wide IF Bandwidth: DC - 4.5 GHz Image Rejection: 20 dB LO to RF Isolation: 45 dB High Input IP3: +20 dBm RoHS Compliant 3x3 mm SMT Package 8 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT • Point-to-Multi-Point Radios & VSAT • Test Equipment & Sensors • Military End Use Functional Diagram General Description The HMC524LC3B is a compact I/Q MMIC mixer which can be used as either an Image Reject Mixer or a Single Sideband Upconverter. The chip utilizes standard Hittite mixer cells and a 90 degree hybrid fabricated in a GaAs MESFET process. A low frequency quadrature hybrid was used to produce a 100 MHz USB IF output. This product is a much smaller alternative to hybrid style Image Reject mixers and single sideband upconverter assemblies. The HMC524LC3B eliminates the need for wirebonding, allowing the use of surface mount techniques. Electrical Specifi cations, TA = +25° C, IF= 100 MHz, LO = +17 dBm* Parameter Frequency Range, RF/LO Frequency Range, IF Conversion Loss (As IRM) Image Rejection 1 dB Compression (Input) LO to RF Isolation LO to IF Isolation IP3 (Input) Amplitude Balance Phase Balance * Unless otherwise noted, all measurements performed as downconverter. 35 20 18 Min. Typ. 22 - 32 DC - 4.5 10 20 +16 40 30 +20 ±0.5 ±2.5 13 Max. Units GHz GHz dB dB dBm dB dB dBm dB Deg 8 - 118 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC524LC3B v02.1208 GaAs MMIC I/Q MIXER 22 - 32 GHz Data Taken As IRM With External IF Hybrid Conversion Gain vs. Temperature 0 Image Rejection vs. Temperature 40 35 CONVERSION GAIN (dB) IMAGE REJECTION (dB) -5 30 25 20 15 10 5 +25C +85C -40C 8 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 8 - 119 -10 -15 +25C +85C -40C -20 19 21 23 25 27 29 31 33 35 RF FREQUENCY (GHz) 0 21 23 25 27 29 31 33 RF FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 -5 -10 -15 -20 -25 -30 21 23 25 27 29 31 33 RF FREQUENCY (GHz) +13dBm +15dBm +17dBm +19dBm Return Loss 0 CONVERSION GAIN (dB) -5 RETURN LOSS (dB) RF LO -10 -15 -20 -25 21 23 25 27 29 31 33 FREQUENCY (GHz) Input P1dB vs. Temperature 24 22 INPUT P1dB (dBm) 20 18 16 14 12 10 21 23 25 27 29 31 33 RF FREQUENCY (GHz) +25C +85C -40C Input IP3 vs. LO Drive 30 25 INPUT IP3 (dBm) 20 15 10 5 0 21 23 25 27 29 31 33 RF FREQUENCY (GHz) LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC524LC3B v02.1208 GaAs MMIC I/Q MIXER 22 - 32 GHz Data Taken As IRM With External IF Hybrid Isolations -10 LO/IF1 IF Bandwidth 0 -5 RESPONSE (dB) -10 -15 -20 -25 RF/IF1 RETURN LOSS CONVERSION GAIN ISOLATION (dB) 8 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT -20 -30 -40 -50 LO/RF -60 21 22 23 24 25 26 27 28 29 30 31 32 33 RF FREQUENCY (GHz) -30 0.5 1 1.5 2 2.5 3 3.5 4 4.5 IF FREQUENCY (GHz) Amplitude Balance vs. LO Drive 3 2 1 0 -1 -2 -3 21 23 25 27 29 31 33 RF FREQUENCY (GHz) Phase Balance vs. LO Drive 20 LO = +13dBm LO = +15dBm LO = +17dBm LO = +19dBm PHASE BALANCE (degrees) AMPLITUDE BALANCE (dB) 10 0 -10 LO = +13dBm LO = +15dBm LO = +17dBm LO = +19dBm -20 21 23 25 27 29 31 33 RF FREQUENCY (GHz) Upconverter Performance Conversion Gain vs. LO Drive 0 Upconverter Performance Sideband Rejection vs. LO Drive 0 SIDEBAND REJECTION (dBc) LO = +13dBm LO = +15dBm LO = +17dBm LO = +19dBm CONVERSION GAIN (dB) -10 -5 -20 -10 -30 -15 LO = +13dBm LO = +15dBm LO = +17dBm LO = +19dBm -40 -20 21 22 23 24 25 26 27 28 29 30 31 32 33 RF FREQUENCY (GHz) -50 21 23 25 27 29 31 33 RF FREQUENCY (GHz) 8 - 120 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC524LC3B v02.1208 GaAs MMIC I/Q MIXER 22 - 32 GHz Absolute Maximum Ratings RF / IF Input LO Drive Channel Temperature Continuous Pdiss (T=85°C) (derate 9.8 mW/°C above 85°C) Thermal Resistance (RTH) (junction to die bottom) Storage Temperature Operating Temperature ESD Sensitivity (HBM) +20 dBm +27 dBm 150°C 340 mW MxN Spurious Outputs nLO mRF 0 1 2 3 4 0 xx 18 76 xx xx 1 -13 0 74 83 xx 2 27 35 87 87 82 3 xx 52 74 77 87 4 xx xx 82 87 87 8 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 8 - 121 191.5 °C/W -65 to +150 °C -55 to +85 °C Class 1A RF = 24.5 GHz @ -10 dBm LO = 24.4 GHz @ 17 dBm Data taken without IF hybrid All values in dBc below IF power level ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKLE 3. DIMENSIONS ARE IN INCHES [MILLIMETERS] 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND 7. CLASSIFIED AS A MOISTURE SENSITIVITY LEVEL (MSL) 1. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC524LC3B v02.1208 GaAs MMIC I/Q MIXER 22 - 32 GHz Pin Descriptions Pin Number 1, 3, 7, 8, 10, 11, 12 Function Description The backside of the die must be connected to RF/DC ground. Interface Schematic GND 8 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 2 RF This pad is AC coupled and matched to 50 Ohms. 4 IF1 6 IF2 This pad is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pad must not source/sink more than 3mA of current or die nonfunction and possible die failure will result. No connection required. These pins may be connected to RF/DC ground without affecting performance 5 N/C 9 LO This pad is DC coupled and matched to 50 Ohms. 8 - 122 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC524LC3B v02.1208 GaAs MMIC I/Q MIXER 22 - 32 GHz Evaluation PCB 8 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 8 - 123 List of Materials for Evaluation PCB 109998 [1] Item J1 - J2 J3 - J4 U1 PCB [2] Description PCB Mount K RF Connector, SRI PCB Mount SMA Connector, Johnson HMC524LC3B Mixer 109996 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com