HMC538LP4_09

HMC538LP4 / 538LP4E v02.0209 600° ANALOG PHASE SHIFTER, 6 - 15 GHz Typical Applications The HMC538LP4 / HMC538LP4E is ideal for: • Fiber Optics • Military • Test Equipment Features Available as Lead Free Wide Bandwidth: 6 - 15 GHz >600° Phase Shift Single Positive Voltage Control QFN Leadless SMT Package, 16 mm2 Functional Diagram General Description The HMC538LP4(E) are Analog Phase Shifters which are controlled via an analog control voltage from 0 to +5V. The HMC538LP4(E)provides a continuously variable phase shift of 0 to 800 degrees at 6 GHz, and 0 to 450 degrees at 16 GHz, with consistent insertion loss versus phase shift. The phase shift is monotonic with respect to control voltage. The control port has a modulation bandwidth of 50 MHz. The low insertion loss and compact size enable this part to be used in a wide range of applications, including the phase adjustment of clocks in fiber optic systems and test equipment. THe HMC538LP4(E) is housed in leadless QFN surface mount packages and are available in both standard and RoHS compliant versions. 10 PHASE SHIFTERS - ANALOG - SMT Electrical Specifi cations, TA = +25° C, 50 Ohm System Parameter Phase Shift Range Insertion Loss Return Loss (Input and Output) Control Voltage Range Modulation Bandwidth Phase Voltage Sensitivity Insertion Phase Temperature Sensitivity Frequency (GHz) 6 - 10 GHz 10 - 15 GHz 6 - 15 GHz 6 - 15 GHz 6 - 15 GHz 6 - 15 GHz 6 - 15 GHz 6 - 15 GHz Min. 600 360 Typ. 800 600 8 7 0-5 50 120 0.5 11 Max. Units degrees degrees dB dB Volt MHz deg /Volt deg /°C 10 - 2 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC538LP4 / 538LP4E v02.0209 600° ANALOG PHASE SHIFTER, 6 - 15 GHz Insertion Loss vs. Control Voltage @ 11 GHz 0 +25C +85C -40C Phase Shift vs. Control Voltage NORMALIZED PHASE SHIFT (degrees) 900 750 600 450 300 150 0 6 GHz 11 GHz 15 GHz INSERTION LOSS (dB) -2 -4 -6 -8 -10 0 1 2 Vctl (Vdc) 3 4 5 0 1 2 Vctl (Vdc) 3 4 5 10 PHASE SHIFTERS - ANALOG - SMT 10 - 3 Phase Shift vs. Frequency @ Vctl = 5V (Relative to Vctl = 0V) NORMALIZED PHASE SHIFT (degrees) 900 750 600 450 300 150 0 5 6 7 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) +25C +85C -40C Insertion Loss vs. Frequency 0 INSERTION LOSS (dB) -4 -8 -12 -16 0V 1V 2V 3V 4V 5V -20 5 6 7 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) Input Return Loss vs. Frequency, Vctl = 0 to +5V 0 Output Return Loss vs. Frequency, Vctl = 0 to +5V 0 RETURN LOSS (dB) -10 RETURN LOSS (dB) 5 6 7 8 9 10 11 12 13 14 15 16 -5 -5 -10 -15 -15 -20 FREQUENCY (GHz) -20 5 6 7 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC538LP4 / 538LP4E v02.0209 600° ANALOG PHASE SHIFTER, 6 - 15 GHz Second Harmonics vs. Control Voltage, Pin = -10 dBm 90 75 2nd HARMONICS (dBc) 60 Input IP3 vs. Control Voltage 35 30 25 IP3 (dBm) 20 15 10 6 GHz 11 GHz 15 GHz 45 30 15 0 0 1 2 Vctl (Vdc) 3 4 5 6 GHz 11 GHz 15 GHz 5 0 0 1 2 Vctl (Vdc) 3 4 5 10 PHASE SHIFTERS - ANALOG - SMT 0 INSERTION LOSS (dB) -2 Insertion Loss vs. Pin @ 7 GHz 0V 2V 5V Insertion Loss vs. Pin @ 11 GHz 0 -4 INSERTION LOSS (dB) -2 0V 2V 5V -4 -6 -6 -8 -8 -10 -15 -10 -5 0 5 10 15 20 25 -10 -15 -10 -5 0 5 10 15 20 25 INPUT POWER (dBm) INPUT POWER (dBm) Insertion Loss vs. Pin @ 15 GHz 0 0V 2V 5V Phase Shift vs. Pin @ 7 GHz NORMALIZED PHASE SHIFT (degrees) 50 40 30 20 10 0 -10 -20 0V 2V 5V INSERTION LOSS (dB) -2 -4 -6 -8 -10 -15 -10 -5 0 5 10 15 20 25 -15 -10 -5 0 5 INPUT POWER (dBm) INPUT POWER (dBm) 10 - 4 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC538LP4 / 538LP4E v02.0209 600° ANALOG PHASE SHIFTER, 6 - 15 GHz Phase Shift vs. Pin @ 11 GHz NORMALIZED PHASE SHIFT (degrees) 20 Phase Shift vs. Pin @ 15 GHz NORMALIZED PHASE SHIFT (degrees) 10 0V 2V 5V 15 0V 2V 5V 6 10 2 5 -2 0 -6 -5 -20 -15 -10 -5 0 5 -10 -20 -15 -10 -5 0 5 INPUT POWER (dBm) INPUT POWER (dBm) 10 PHASE SHIFTERS - ANALOG - SMT 10 - 5 Absolute Maximum Ratings Control Voltage (Vctl) Input Power (RFin) Channel Temperature (Tc) Continuous Pdiss (T = 85 °C) (derate 21 mW/°C above 85 °C) Thermal Resistance (junction to ground paddle) Storage Temperature Operating Temperature ESD Sensitivity (HBM) -1 Vdc to + 8 Vdc +25 dBm 150 °C 1.36 W 48 °C/W -65 to +150 °C -40 to +85 °C Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC538LP4 / 538LP4E v02.0209 600° ANALOG PHASE SHIFTER, 6 - 15 GHz Outline Drawing 10 PHASE SHIFTERS - ANALOG - SMT Package Information Part Number HMC538LP4 HMC538LP4E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 6. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1. Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H538 XXXX H538 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX Pin Descriptions Pin Number 1, 2, 4-15, 17-20, 22-24 3 Function N/C Description No connection required. These pins may be connected to RF/DC ground without affecting performance. Port is DC blocked. Interface Schematic RFIN 16 RFOUT Port is DC blocked. 21 Vctl Phase shift control pin. Application of a voltage between 0 and 5 volts causes the transmission phase to change. The DC equivalent circuit is a series connected diode and resistor. GND Ground: Backside of package has exposed metal ground slug that must be connected to ground thru a short path. Vias under the device are required. 10 - 6 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC538LP4 / 538LP4E v02.0209 600° ANALOG PHASE SHIFTER, 6 - 15 GHz Evaluation PCB 10 PHASE SHIFTERS - ANALOG - SMT 10 - 7 List of Materials for Evaluation PCB 108812 [1] Item J1 - J3 U1 PCB [2] Description PCB Mount SMA RF Connector HMC538LP4 / HMC538LP4E Analog Phase Shifter 111296 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com