HMC554LC3B

HMC554LC3B v00.1205 GaAs MMIC FUNDAMENTAL MIXER, 11 - 20 GHz Typical Applications The HMC554LC3B is ideal for: • Point-to-Point Radios Features High LO/RF Isolation: 46 dB Passive Double Balanced Topology Low Conversion Loss: 7 dB Wide IF Bandwidth: DC - 6 GHz RoHS Compliant 3x3 mm SMT Package 7 MIXERS - SMT • Point-to-Mulit-Point Radios & VSAT • Test Equipment & Sensors • Military End-Use Functional Diagram General Description The HMC554LC3B is a general purpose double balanced mixer in a leadless RoHS compliant SMT package that can be used as an upconverter or downconverter between 11 and 20 GHz. This mixer is fabricated in a GaAs MESFET process, and requires no external components or matching circuitry. The HMC554LC3B provides excellent LO to RF and LO to IF isolation due to optimized balun structures. The RoHS compliant HMC554LC3B eliminates the need for wire bonding, and is compatible with high volume surface mount manufacturing techniques. Electrical Specifications, TA = +25° C, IF= 100 MHz, LO= +13 dBm* Parameter Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation RF to IF Isolation IP3 (Input) IP2 (Input) 1 dB Gain Compression (Input) 40 34 18 Min. Typ. 12 - 16 DC - 6 7 7 46 40 25 18 48 11 9 9 40 30 15 Max. Min. Typ. 11 - 20 DC - 6 8 8 46 40 25 18 45 11 11 11 Max. Units GHz GHz dB dB dB dB dB dBm dBm dBm *Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz. 7 - 412 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC554LC3B v00.1205 GaAs MMIC FUNDAMENTAL MIXER, 11 - 20 GHz Conversion Gain vs. Temperature @ LO = +13 dBm 0 Isolation @ LO = +13 dBm 0 -10 RF/IF LO/RF LO/IF CONVERSION GAIN (dB) -5 ISOLATION (dB) -20 -30 -40 -50 -60 10 11 12 13 14 15 16 17 18 19 20 10 11 12 13 14 15 7 MIXERS - SMT 7 - 413 -10 -15 +25 C +85 C -40 C -20 FREQUENCY (GHz) 16 17 18 19 20 FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 Return Loss @ LO = +13 dBm 0 -5 RETURN LOSS (dB) CONVERSION GAIN (dB) -5 -10 -15 -20 -25 -30 RF LO -10 -15 +9 dBm +11 dBm +13 dBm +15 dBm -20 10 11 12 13 14 15 16 17 18 19 20 FREQUENCY (GHz) 10 11 12 13 14 15 16 17 18 19 20 FREQUENCY (GHz) IF Bandwidth @ LO = +13 dBm 0 Upconverter Performance Conversion Gain vs. LO Drive 0 -5 RESPONSE (dB) CONVERSION GAIN (dB) -5 -10 -10 -15 IF Return Loss Conversion Gain -15 +9 dBm +11 dBm +13 dBm +15 dBm -20 0 1 2 3 4 5 6 7 FREQUENCY (GHz) -20 10 11 12 13 14 15 16 17 18 19 20 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC554LC3B v00.1205 GaAs MMIC FUNDAMENTAL MIXER, 11 - 20 GHz Input IP3 vs. Temperature @ LO = +13 dBm* 30 25 INPUT IP3 (dBm) 20 15 10 5 0 +25 C +85 C -40 C Input IP3 vs. LO Drive * 30 25 INPUT IP3 (dBm) 7 MIXERS - SMT 20 15 10 5 0 10 11 12 13 14 15 16 17 18 19 20 FREQUENCY (GHz) +9 dBm +11 dBm +13 dBm +15 dBm 10 11 12 13 14 15 16 17 18 19 20 FREQUENCY (GHz) Input IP2 vs. LO Drive * 60 Input IP2 vs. Temperature @ LO = +13 dBm* 60 50 INPUT IP2 (dBm) INPUT IP2 (dBm) +9 dBm +11 dBm +13 dBm +15 dBm 50 40 40 30 30 +25C +85C -40C 20 20 10 10 11 12 13 14 15 16 17 18 19 20 FREQUENCY (GHz) 10 10 11 12 13 14 15 16 17 18 19 20 FREQUENCY (GHz) Input P1dB vs. Temperature @ LO = +13 dBm 14 13 INPUT P1dB (dBm) 12 11 10 9 8 7 6 10 11 12 13 14 15 16 17 18 19 20 FREQUENCY (GHz) +25C +85C -40C MxN Spurious Outputs nLO mRF 0 1 2 3 4 0 xx 29 81 xx xx 1 19 0 85 97 xx 2 25 51 60 98 105 3 xx 55 88 76 98 4 xx xx 104 99 105 RF = 15.1 GHz @ -10 dBm LO = 15.0 GHz @ +13 dBm All values in dBc below the IF output power level. * Two-tone input power = -10 dBm each tone, 1 MHz spacing. 7 - 414 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC554LC3B v00.1205 GaAs MMIC FUNDAMENTAL MIXER, 11 - 20 GHz Absolute Maximum Ratings RF / IF Input LO Drive Channel Temperature Continuous Pdiss (T= 85 °C) (derate 2.32 mW/°C above 85 °C) Thermal Resistance (channel to ground paddle) Storage Temperature Operating Temperature +25 dBm +25 dBm 150 °C 150 mW 431 °C/W -65 to +150 °C -40 to +85 °C 7 MIXERS - SMT 7 - 415 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA. 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES (MILLIMETERS). 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK, OR LASER MARK LOCATED APPROX. AS SHOWN. 6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C – 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 8. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC554LC3B v00.1205 GaAs MMIC FUNDAMENTAL MIXER, 11 - 20 GHz Pin Descriptions Pin Number Function Description Interface Schematic 7 MIXERS - SMT 1, 3, 4, 6, 7, 9 GND Package bottom must also be connected to RF/DC ground. 2 LO This pin is DC coupled and matched to 50 Ohm from 11 to 20 GHz. 5 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source or sink more than 2 mA of current or part non-function and possible part failure will result. 8 RF This pin is DC coupled and matched to 50 Ohm from 11 to 20 GHz. 10, 11, 12 N/C No connection required. These pins may be connected to RF/DC ground without affecting performance. 7 - 416 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC554LC3B v00.1205 GaAs MMIC FUNDAMENTAL MIXER, 11 - 20 GHz Evaluation PCB 7 MIXERS - SMT List of Materials for Evaluation PCB 109952 [1] Item J1 - J2 J3 U1 PCB [2] Description SRI SMA Connector Johnson SMA Connector HMC554LC3B Mixer 108777 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 417