HMC569LC5_10

HMC569LC5 v06.1208 Typical Applications The HMC569LC5 is ideal for: • Point-to-Point and Point-to-Multi-Point Radio 10 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT • Military Radar, EW & ELINT • Satellite Communications Functional Diagram ED U IN NT T O SC DUC DI RO P Features Conversion Gain: 14 dB Image Rejection: 32 dB LO to RF Isolation: 45 dB Noise Figure: 2.5 dB Input IP3: -0.5 dBm 32 Lead 5x5mm SMT Package: 25mm2 GaAs MMIC I/Q DOWNCONVERTER 12 - 16 GHz w r Ne o ed f General Description d men HMC569LC5 is a compact GaAs MCM I/Q The om downconverter in a leadless RoHS compliant Rec SMT package. This device provides a small signal Not conversion gain of 14 dB with a noise figure of 2.5 dB and 32 dB of image rejection. The HMC569LC5 utilizes an LNA followed by an image reject mixer which is driven by an LO buffer amplifier. The image reject mixer eliminates the need for a filter following the LNA, and removes thermal noise at the image frequency. I and Q mixer outputs are provided and an external 90° hybrid is needed to select the required sideband. The HMC569LC5 is a much smaller alternative to hybrid style image reject mixer downconverter assemblies, and it eliminates the need for wire bonding by allowing the use of surface mount manufacturing techniques. s sign De Electrical Specifi cations, TA = +25° C, IF = 100 MHz, LO = 0 dBm, VD3 = 5V, VD1, VD2 = 3V* Parameter Frequency Range, RF Frequency Range, LO Frequency Range, IF Conversion Gain (As IRM) Noise Figure Image Rejection 1 dB Compression (Input) LO to RF Isolation LO to IF Isolation IP3 (Input) Amplitude Balance Phase Balance Total Supply Current *Data taken as IRM with external IF Hybrid 30 20 15 10 Min. Typ. 12 - 16 8.5 - 19.5 DC - 3.5 14 2.5 32 -7 45 32 -0.5 0 ±10 160 208 Max. Units GHz GHz GHz dB dB dB dBm dB dB dBm dB Deg mA 10 - 1 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC569LC5 v06.1208 Data Taken As IRM With External IF Hybrid Conversion Gain vs. Temperature 20 15 CONVERSION GAIN (dB) 10 5 0 -5 -10 11 12 13 14 +25C +85C -40C 30 20 10 15 16 17 11 12 13 14 15 16 17 RF FREQUENCY (GHz) RF FREQUENCY (GHz) Conversion Gain vs. LO Drive 20 15 CONVERSION GAIN (dB) 10 5 0 -5 -10 11 12 13 14 15 16 17 RF FREQUENCY (GHz) -4dBm -2dBm 0dBm 2dBm 4dBm Return Loss 0 -5 RETURN LOSS (dB) -10 -15 LO RF -20 -25 8 10 12 14 16 18 20 FREQUENCY (GHz) Input P1dB vs. Temperature 0 -2 -4 -6 -8 +25C +85C -40C Input IP3 vs. LO Drive 4 2 IP3 (dBm) 0 -2 LO = -2 dBm LO = 0 dBm LO = +2 dBm LO = +4 dBm -4 -10 -12 11 12 13 14 15 16 17 RF FREQUENCY (GHz) -6 11 12 13 14 15 16 17 RF FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 2 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT ED U IN NT T O SC DUC DI RO P Image Rejection vs. Temperature 60 +25C +85C -40C GaAs MMIC I/Q DOWNCONVERTER 12 - 16 GHz IMAGE REJECTION (dB) 50 40 D New r d fo e end m com e ot R N s sign e 10 P1dB (dBm) HMC569LC5 v06.1208 Quadrature Channel Data Taken Without IF Hybrid Isolations 10 0 -10 -20 -30 -40 -50 -60 11 12 13 14 LO/IF1 RF/IF2 ISOLATION (dB) RESPONSE (dB) 10 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT ED U IN NT T O SC DUC DI RO P IF Bandwidth* 40 GaAs MMIC I/Q DOWNCONVERTER 12 - 16 GHz RF/IF1 20 RETURN LOSS CONVERSION GAIN LO/RF RF FREQUENCY (GHz) w r Ne o ed f d men om Rec Not -20 LO/IF2 0 s sign De 15 16 17 -40 0.5 1 1.5 2 2.5 3 3.5 IF FREQUENCY (GHz) Amplitude Balance vs. LO Drive 5 LO = -4 dBm LO = -2 dBm LO = +0 dBm LO = +2 dBm LO = +4 dBm Phase Balance vs. LO Drive 20 PHASE BALANCE (degrees) AMPLITUDE BALANCE (dB) 3 10 1 LO = -4 dBm LO = -2 dBm LO = 0 dBm LO = +2 dBm LO = +4 dBm 0 -1 -10 -3 -5 11 12 13 14 15 16 17 RF FREQUENCY (GHz) -20 11 12 13 14 15 16 17 RF FREQUENCY (GHz) Noise Figure vs. LO Drive, LO Frequency = 12 GHz 8 Noise Figure vs. LO Drive, IF Frequency = 100 MHz 6 5 NOISE FIGURE (dB) 4 3 2 1 -2dBm +0dBm +2dBm +4dBm NOISE FIGURE (dB) 6 -4dBm -2dBm +0dBm +2dBm +4dBm 4 2 0 0.5 0 1 1.5 2 2.5 3 3.5 11 12 13 14 15 16 17 IF FREQUENCY (GHz) RF FREQUENCY (GHz) * Conversion gain data taken with external IF hybrid, LO frequency fi xed at 12 GHz and RF varied 10 - 3 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC569LC5 v06.1208 MxN Spurious Outputs mRF 0 1 2 3 4 0 1 xx 14 27 41 54 41 27 14 xx RF = 13.6 GHz @ -20 dBm LO = 13.5 GHz @ 0 dBm Thermal Resistance (RTH) (channel to package bottom) Storage Temperature 71 °C/W Data taken without IF hybrid -65 to +150 °C -55 to +85 °C Class 1A All values in dBc below IF power level. Operating Temperature ESD Sensitivity (HBM) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKLE 3. DIMENSIONS ARE IN INCHES [MILLIMETERS] 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 4 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT ED U IN NT T O SC DUC DI RO P Absolute Maximum Ratings RF +5 dBm LO Drive +20 dBm nLO 2 3 4 14 xx 27 13 xx 41 54 40 27 13 VD1, VD2 VD3 4.0V 27 13 xx 5.5V 14 Channel Temperature 27 14 GaAs MMIC I/Q DOWNCONVERTER 12 - 16 GHz D New r d fo e end m com e ot R N Continuous Pdiss (T=85°C) (derate 9.56 mW/°C above 85°C) s sign e 150°C 0.65 W 10 HMC569LC5 v06.1208 Pin Descriptions Pin Number 1, 5, 7 - 9, 13 - 16, 22 - 27, 30 - 32 2, 4, 10, 12, 17, 19, 21 10 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 3 6 ED U IN NT T O SC DUC DI RO P Function N/C Description Interface Schematic No connection required. These pins may be connected to RF/DC ground without affecting performance. These pins and ground paddle must be connected to RF/DC ground. This pin is AC coupled and matched to 50 Ohms. GND RF VD3 VD1, VD2 GaAs MMIC I/Q DOWNCONVERTER 12 - 16 GHz 28, 29 w r Ne o ed f d men om Rec Not Power supply for LO amplifier. 100 mA typical, 120 mA maximum. Power supply for RF LNA. 60 mA typical, 88 mA maximum. s sign De 18 IF2 20 IF1 This pin is DC coupled for applications not requiring operation to DC. This port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary frequency range. For operation to DC, this pin must not sink / source more than 3 mA of current or part non-function and possible failure will result. This pin is AC coupled and matched to 50 Ohms. 11 LO Typical Application Note: LSB and USB is determined by GND on Hybrid 10 - 5 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC569LC5 v06.1208 Evaluation PCB List of Materials for Evaluation PCB 111227 [1] Item C1, C2, C3 C4, C5, C6 C7, C8,C9 J1, J2 J3, J4 J5, J6 J7 R1, R2 U1 VC1 PCB [2] Description Capacitor 0402, Pkg. 100pF Capacitor 0402, Pkg. 1000pF Capacitor, Case A, 2.2uF *(Polarity) PCB Mount SMA RF Connector, SRI PCB Mount SMA Connector, Johnson DC Pin DC Pin Resistor, 0402 Pkg. 0 Ohm HMC569LC5 N/C 111225 Evaluation Board The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 6 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT ED U IN NT T O SC DUC DI RO P D New r d fo e end m com e ot R N s sign e GaAs MMIC I/Q DOWNCONVERTER 12 - 16 GHz 10