HMC602LP4E

HMC602LP4 / 602LP4E v01.0407 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz Typical Applications The HMC602LP4(E) is ideal for IF and RF applications in: • Cellular/PCS/3G • WiMAX, WiBro, WLAN, Fixed Wireless & Radar • Power Monitoring & Control Circuitry Features Wide Dynamic Range: up to 70 dB High Accuracy: ±1 dB with 60 dB Range Up To 6 GHz Fast: 8ns Output Response Time Supply Voltage: +5V Power-Down Mode Excellent Stability over Temperature Buffered Temperature Sensor Output Compact 4x4mm Leadless SMT Package 8 POWER DETECTORS - SMT • Receiver Signal Strength Indication (RSSI) • Automatic Gain & Power Control Functional Diagram General Description The HMC602LP4(E) Logarithmic Detector/Controller converts RF signals at its input, to a proportional DC voltage at its output. The HMC602LP4(E) employs a successive compression topology which delivers extremely high dynamic range and conversion accuracy over a wide input frequency range. As the input power is increased, successive amplifiers move into saturation one by one creating an accurate approximation of the logarithm function. The output of a series of square law detectors is summed, converted into voltage domain and buffered to drive the LOGOUT output. For detection mode, the LOGOUT pin is shorted to the VSET input, and will provide a nominal logarithmic slope of -25mV/ dB and an intercept of 12 dBm (19 dBm for ƒ ≥ 5.8 GHz). The HMC602LP4(E) can also be used in the controller mode where an external voltage is applied to the VSET pin, to create an AGC or APC feedback loop. Electrical Specifications, TA = +25C, EN= 5V, Vcc1, Vcc2, Vcc3= +5V [1] Parameter Input Frequency ±3 dB Dynamic Range ±3 dB Dynamic Range Center ±1 dB Dynamic Range Output Slope Output Intercept Temperature Sensitivity @ -10 dBm Input [2] Typ. 50 70 -30 61 -25.7 +13.2 12.3 Typ. 100 70 -30 61 -25.7 +13.2 11.2 Typ. 900 72 -30.5 63 -25.3 +13.4 11.4 Typ. 1900 71 -32.5 63 -25.0 +13.0 11.6 Typ. 2200 72 -33 62 -24.9 +12.4 12.5 Typ. 3600 70 -31 57 -24.8 +14.2 14.7 Typ. 5800 66 -25 60 -25.5 +21.3 16.9 Typ. 7000 62 -22 55 -27.5 +20.2 24.6 Typ. 7500 59 -22 50 -28.9 +19.2 27.7 Typ. 8000 57 -20.5 46 -30.2 +18.5 33.0 Units MHz dB dBm dB mV/dB dBm mdB/°C [1] Detector mode measurements; LOGOUT (Pin 15) is shorted to VSET (Pin 16). [2] Measured from TA = - 40C to TA = +85C 8 - 22 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC602LP4 / 602LP4E v01.0407 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz Electrical Specifications, (continued) Parameter LOGOUT Interface Output Voltage Range Output Rise Time/Fall Time VSET Interface Input Impedance Input Voltage Range Low Frequency Gain Open Loop Corner Frequency Power Down (EN) Interface Voltage Range for Normal Mode Voltage Range for Powerdown Mode Threshold Voltage Power Supply (Vcc1, Vcc2, Vcc3) Operating Voltage Range Supply Current in Normal Mode Supply Current in Power Down Mode [1] Vcc= Vcc1= Vcc2= Vcc3= +5V 4.5 113 1 5.5 V mA mA 0.8 x Vcc [1] 0 Vcc [1]/2 Vcc [1] 0.2 x Vcc [1] V V V VSET to LOGOUT 30 0.25 to 1.35 56 700 kΩ V dB kHz From 0% to 90% 0 7.5 / 8.1 Vcc -1.0 V ns Conditions Min. Typ. Max. Units 8 POWER DETECTORS - SMT 8 - 23 Test Conditions Parameter Vcc1, Vcc2, Vcc3 Input Zo - w/ 68Ω Term Resistor at INP TA Fin Condition +5V 50Ω +25C 900 MHz INN Port connected to ground through a 1000pF capacitor For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC602LP4 / 602LP4E v01.0407 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz LOGOUT Voltage & Error vs. Input Power, Fin = 50 MHz 2.6 IDEAL 2.2 1.8 1.4 1 0.6 ERR +25C ERR +85C ERR -40C LOGOUT +25C LOGOUT +85C LOGOUT -40C LOGOUT Voltage & Error vs. Input Power, Fin = 100 MHz 3 2 1 ERROR (dB) 0 -1 -2 -3 2.6 IDEAL 2.2 1.8 1.4 1 0.6 0.2 -70 -60 -50 -40 -30 -20 -10 0 LOGOUT +25C LOGOUT +85C LOGOUT -40C ERR +25C ERR +85C ERR -40C 3 2 1 ERROR (dB) 0 -1 -2 -3 LOGOUT (V) 8 POWER DETECTORS - SMT 0.2 -70 -60 -50 -40 -30 -20 -10 0 INPUT POWER (dBm) LOGOUT (V) INPUT POWER (dBm) LOGOUT Voltage & Error vs. Input Power, Fin = 900 MHz 2.6 2.2 1.8 1.4 1 0.6 0.2 -70 -60 -50 -40 -30 -20 -10 0 IDEAL LOGOUT +25C LOGOUT +85C LOGOUT -40C ERR +25C ERR +85C ERR -40C LOGOUT Voltage & Error vs. Input Power, Fin = 1900 MHz 3 2 1 ERROR (dB) 0 -1 -2 -3 2.6 IDEAL 2.2 1.8 1.4 1 0.6 0.2 -70 -60 -50 -40 -30 -20 -10 0 LOGOUT +25C LOGOUT +85C LOGOUT -40C ERR +25C ERR +85C ERR -40C 3 2 1 ERROR (dB) 0 -1 -2 -3 LOGOUT (V) INPUT POWER (dBm) LOGOUT (V) INPUT POWER (dBm) LOGOUT Voltage & Error vs. Input Power, Fin = 2200 MHz 2.6 IDEAL 2.2 1.8 1.4 1 0.6 0.2 -70 -60 -50 -40 -30 -20 -10 0 LOGOUT +25C LOGOUT +85C LOGOUT -40C ERR +25C ERR +85C ERR -40C LOGOUT Voltage & Error vs. Input Power, Fin = 3600 MHz 3 2 1.7 LOGOUT (V) 1 0 -1 -2 -3 0.2 -70 -60 -50 -40 -30 -20 -10 0 ERROR (dB) 2.2 LOGOUT +25C LOGOUT +85C LOGOUT -40C 5 LOGOUT (V) ERROR (dB) 1.2 0 0.7 ERR +25C ERR +85C ERR -40C IDEAL -5 10 INPUT POWER (dBm) INPUT POWER (dBm) Unless otherwise noted: Vcc1, Vcc2, Vcc3 = +5V, TA = +25C 8 - 24 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC602LP4 / 602LP4E v01.0407 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz LOGOUT Voltage & Error vs. Input Power, Fin = 5800 MHz 2.2 IDEAL LOGOUT +25C LOGOUT +85C LOGOUT -40C LOGOUT Voltage & Error vs. Input Power, Fin = 7000 MHz 5 2.2 LOGOUT +25C LOGOUT +85C LOGOUT -40C 5 1.7 LOGOUT (V) 1.7 LOGOUT (V) ERROR (dB) IDEAL ERROR (dB) 1.2 0 1.2 0 0.7 ERR +25C ERR +85C ERR -40C 0.7 ERR +25C ERR +85C ERR -40C 8 POWER DETECTORS - SMT 8 - 25 0.2 -70 -60 -50 -40 -30 -20 -10 0 -5 10 0.2 -70 -60 -50 -40 -30 -20 -10 0 -5 10 INPUT POWER (dBm) INPUT POWER (dBm) LOGOUT Voltage & Error vs. Input Power, Fin = 7500 MHz 2.2 LOGOUT +25C LOGOUT +85C LOGOUT -40C LOGOUT Voltage & Error vs. Input Power, Fin = 8000 MHz 5 2.2 LOGOUT +25C LOGOUT +85C LOGOUT -40C 5 1.7 LOGOUT (V) IDEAL 1.8 LOGOUT (V) ERROR (dB) IDEAL ERROR (dB) 1.4 0 1 1.2 0 0.7 ERR +25C ERR +85C ERR -40C 0.6 -5 ERR +25C ERR +85C ERR -40C 0.2 -70 -60 -50 -40 -30 -20 -10 0 0.2 -70 -60 -50 -40 -30 -20 -10 0 -5 10 10 INPUT POWER (dBm) INPUT POWER (dBm) LOGOUT Slope vs. Frequency -20 -22 SLOPE (mV/dB) -24 -26 -28 -30 +25 C +85 C -40 C LOGOUT Slope vs. Supply Voltage -20 100 MHz 1900 MHz 3600 MHz 5800 MHz 8000 MHz -22 SLOPE (mV/dB) 6000 7000 8000 -24 -26 -28 -30 -32 1000 2000 3000 4000 5000 4.5 5 Vcc1, Vcc2, Vcc3 (Volts) 5.5 FREQUENCY (MHz) Unless otherwise noted: Vcc1, Vcc2, Vcc3 = +5V, TA = +25C For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC602LP4 / 602LP4E v01.0407 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz LOGOUT Intercept vs. Frequency 24 22 INTERCEPT (dBm) 20 18 16 14 12 +25 C +85 C -40 C LOGOUT Intercept vs. Supply Voltage 24 22 INTERCEPT (dBm) 20 18 16 14 12 10 4.5 100MHz 1900 MHz 3600 MHz 5800 MHz 8000 MHz 8 POWER DETECTORS - SMT 10 0 1000 2000 3000 4000 5000 6000 7000 8000 FREQUENCY (MHz) 5 Vcc1, Vcc2, Vcc3 (Volts) 5.5 LOGOUT Error vs. Input Power, Normalized [2], Fin= 1900 MHz 2 1.5 1 ERROR (dB) LOGOUT Voltage vs. Input Power & Frequency 2.4 2.2 2 1.8 LOGOUT (V) 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 -70 50 MHz 100 MHz 900 MHz 1900 MHz 2200 MHz 3600 MHz 5800 MHz 6500 MHz 7000 MHz 7500 MHz 8000 MHz 0.5 0 -0.5 -1 -1.5 -2 -70 +85 C -40 C -60 -50 -40 -30 -20 -10 0 -60 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm) INPUT POWER (dBm) Input Impedance vs Frequency [3] 0.9 1.0 0.8 1.2 0.7 1.4 1.6 0.6 1.8 S11 2.0 0. 5 3. 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 2.0 3.0 4.0 5.0 0.1 GHz 0.1 10 0 0.3 4.7 GHz .4 8.0 GHz 0 0 5 0.6 0.7 0.8 0.9 8 - 26 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 1.0 1.2 1.4 1 .6 1.8 2 .0 0. 3. 4.0 RF Café 2002 5.0 0.2 8.0 10 0.9 GHz 20 6.0 0. 4.0 4 0.3 5.8 GHz 0.2 5.0 6.0 2.2 GHz 0.1 6.8 GHz 8.0 10 20 1.9 GHz 3.6 GHz [1] Unless otherwise noted: Vcc1, Vcc2, Vcc3 = +5V, TA = +25C [2] This data is relative to the room temperature performance of the HMC602LP4(E) [3] Reference plane at J1 connector on eval board HMC602LP4 / 602LP4E v01.0407 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz Absolute Maximum Ratings Vcc1, Vcc2, Vcc3 EN VSET Input Voltage LOGOUT Output Current RF Input Power Junction Temperature Continuous Pdiss (T = 85°C) (Derate 7.95 mW/°C above 85°C) Thermal Resistance (Rth) (junction to lead) Storage Temperature Operating Temperature +5.5V +5.5V +5.5V 3 mA +15 dBm 125 °C 1.55 Watts 42 °C/W -65 to +150 °C -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 8 POWER DETECTORS - SMT NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HMC APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. Outline Drawing Package Information Part Number HMC602LP4 HMC602LP4E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H602 XXXX H602 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 27 HMC602LP4 / 602LP4E v01.0407 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz Pin Descriptions Pin Number 1, 6, 7, 13, 17, 18 Function N/C Description These pins are not connected internally; however, this product is specified with these pins connected to RF/DC ground. Interface Schematic 8 2 TEMP Temperature sensor output pin. POWER DETECTORS - SMT 3, 4 INP, INN RF Input pins. Connect RF to INP, and AC couple INN to ground for single-ended operation. 5 EN Enable pin, connect to Vcc1, Vcc2, Vcc3 for normal operation. Applying voltage