HMC633LC4

HMC633LC4 v00.1107 GaAs PHEMT MMIC DRIVER AMPLIFIER, 5.5 - 17 GHz Typical Applications Features Gain: 30 dB P1dB: +23 dBm Saturated Power: +23.8 dBm @ 24% PAE Single Supply Voltage: +5V @180 mA 50 Ohm Matched Input/Output 24 Lead Ceramic 4x4mm SMT Package: 16mm2 5 DRIVER & GAIN BLOCK AMPLIFIERS - SMT The HMC633LC4 is ideal for: • Point-to-Point Radios • Point-to-Multi-Point Radios & VSAT • LO Driver for Mixers • Military & Space Functional Diagram General Description The HMC633LC4 is a GaAs PHEMT MMIC Driver Amplifier in a leadless 4 x 4 mm ceramic surface mount package which operates between 5.5 and 17 GHz. The amplifier provides up to 30 dB of gain, +30 dBm Output IP3, and +23 dBm of output power at 1 dB gain compression, while requiring 180 mA from a +5V supply. The HMC633LC4 is an ideal driver amplifier for microwave radio applications from 5.5 to 17 GHz and may be biased at +5V, 130 mA to provide 2 dB lower gain with improved PAE. The amplifier’s I/Os are DC blocked and matched to 50 Ohms with no external matching required. Electrical Specifi cations, TA = +25° C, Vdd1-4= 5V, Idd= 180mA [1] Parameter Frequency Range Gain Gain Variation Over Temperature Input Return Loss Output Return Loss Output Power for 1 dB Compression (P1dB) Saturated Output Power (Psat) Output Third Order Intercept (IP3) Noise Figure Supply Current (Idd) (Idd = Idd1 + Idd2 + Idd3 + Idd4) [1] Adjust Vgg between -2 to 0V to achieve Idd= 180 mA typical. 20 26 Min. Typ. 5.5 - 9 30 0.030 22 22 23 23.8 30 10 180 18 0.040 25 Max. Min. Typ. 9 - 17 28 0.030 17 15 21 22 29 7 180 0.040 Max. Units GHz dB dB/ °C dB dB dBm dBm dBm dB mA 5 - 160 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC633LC4 v00.1107 GaAs PHEMT MMIC DRIVER AMPLIFIER, 5.5 - 17 GHz Broadband Gain & Return Loss 40 30 20 RESPONSE (dB) S11 S21 S22 Gain vs. Temperature 35 30 25 20 15 10 5 0 +25 C +85 C -55 C 5 DRIVER & GAIN BLOCK AMPLIFIERS - SMT 5 - 161 0 -10 -20 -30 -40 2 4 6 8 10 GAIN (dB) 10 12 14 16 18 20 2 4 6 8 10 12 14 16 18 20 FREQUENCY (GHz) FREQUENCY (GHz) Input Return Loss vs. Temperature 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 2 4 6 8 10 12 14 16 18 20 FREQUENCY (GHz) +25 C +85 C -40 C Output Return Loss vs. Temperature 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 2 4 6 8 10 12 14 16 18 20 FREQUENCY (GHz) +25 C +85 C -40 C P1dB vs. Temperature 30 Psat vs. Temperature 30 +25 C +85 C -40 C 27 26 P1dB (dBm) Psat (dBm) +25 C +85 C -40 C 24 22 21 18 18 14 4 8 12 FREQUENCY (GHz) 16 20 15 4 6 8 10 12 14 16 18 20 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC633LC4 v00.1107 GaAs PHEMT MMIC DRIVER AMPLIFIER, 5.5 - 17 GHz Power Compression @ 11 GHz Pout (dBm), GAIN (dB), PAE (%) Power Compression @ 17 GHz 35 Pout (dBm), GAIN (dB), PAE (%) 30 25 20 15 10 5 0 -20 Pout (dBm) Gain (dB) PAE (%) 5 DRIVER & GAIN BLOCK AMPLIFIERS - SMT 35 30 25 20 15 10 5 0 -20 Pout (dBm) Gain (dB) PAE (%) -18 -16 -14 -12 -10 -8 -6 -4 -2 -18 -16 -14 -12 -10 -8 -6 -4 -2 INPUT POWER (dBm) INPUT POWER (dBm) Output IP3 vs. Temperature 36 Noise Figure vs. Temperature 16 14 32 NOISE FIGURE (dB) 12 10 8 6 4 2 16 2 4 6 8 10 12 14 16 18 20 FREQUENCY (GHz) 0 4 6 8 10 12 14 16 18 FREQUENCY (GHz) +25 C +85 C -40 C IP3 (dBm) 28 +25 C +85 C -40 C 24 20 Gain & Power vs. Supply Voltage @ 11 GHz 35 GAIN (dB), P1dB (dBm), Psat (dBm) Reverse Isolation vs. Temperature 0 30 ISOLATION (dB) -20 25 -40 +25 C +85 C -40 C 20 Gain P1dB Psat -60 15 4.5 -80 4.7 4.9 Vdd (V) 5.1 5.3 5.5 2 5 8 11 14 17 20 FREQUENCY (GHz) 5 - 162 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC633LC4 v00.1107 GaAs PHEMT MMIC DRIVER AMPLIFIER, 5.5 - 17 GHz Gain, Power & Output IP3 vs. Gate Voltage @ 11 GHz GAIN (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) 35 Idd 210 5 DRIVER & GAIN BLOCK AMPLIFIERS - SMT 5 - 163 Idd (mA) 30 180 25 150 20 Gain P1dB Psat IP3 120 15 -0.8 -0.78 -0.76 -0.74 Vgg (V) -0.72 -0.7 90 -0.68 Absolute Maximum Ratings Drain Bias Voltage (Vdd1, Vdd2, Vdd3, Vdd4) Gate Bias Voltage (Vgg) RF Input Power (RFIN)(Vdd = +5 Vdc) Channel Temperature Continuous Pdiss (T= 85 °C) (derate 11.08 mW/°C above 85 °C) Thermal Resistance (channel to package bottom) Storage Temperature Operating Temperature +5.5 Vdc -3 to 0 Vdc +5 dBm 175 °C 0.99 W 90.23 °C/W -65 to +150 °C -40 to +85 °C Typical Supply Current vs. Vdd Vdd (V) 4.5 5.0 5.5 Idd (mA) 177 180 182 Note: Amplifi er will operate over full voltage ranges shown above ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC633LC4 v00.1107 GaAs PHEMT MMIC DRIVER AMPLIFIER, 5.5 - 17 GHz Outline Drawing 5 DRIVER & GAIN BLOCK AMPLIFIERS - SMT NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 5 - 164 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC633LC4 v00.1107 GaAs PHEMT MMIC DRIVER AMPLIFIER, 5.5 - 17 GHz Pin Descriptions Pin Number 1, 5 - 8, 11 - 14, 18, 21, 23 2, 4, 15, 17 Function N/C Description No connection. These pins may be connected to DC/RF ground. Performance will not be affected. Package Bottom must be connected to RF/DC ground. This pin is AC coupled and matched to 50 Ohms. Interface Schematic 5 DRIVER & GAIN BLOCK AMPLIFIERS - SMT 5 - 165 GND 3 RFIN 9 Vgg Gate control for amplifier, please follow “MMIC Amplifier Biasing Procedure” Application Note: See application circuit for required external components. 16 RFOUT This pin is AC coupled and matched to 50 Ohms. 24, 22, 20, 19 Vdd1, Vdd2, Vdd3, Vdd4 Power Supply Voltage for the amplifier. See application circuit for required external components. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC633LC4 v00.1107 GaAs PHEMT MMIC DRIVER AMPLIFIER, 5.5 - 17 GHz Application Circuit 5 Component Value 100 pF 1000 pF 2.2 μF DRIVER & GAIN BLOCK AMPLIFIERS - SMT C1 - C5 C6 - C10 C11 - C15 5 - 166 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC633LC4 v00.1107 GaAs PHEMT MMIC DRIVER AMPLIFIER, 5.5 - 17 GHz Evaluation PCB 5 DRIVER & GAIN BLOCK AMPLIFIERS - SMT 5 - 167 List of Materials for Evaluation PCB 115857 [1] Item J1 - J2 VD1 - VD4 C1 - C5 C6 - C10 C11 - C15 U1 PCB [2] Description 2.92 mm PC Mount K-Connector DC Pin 100 pF Capacitor, 0402 Pkg. 1000 pF Capacitor, 0603 Pkg. 2.2 μF Capacitor, Tantalum HMC633LC4 Driver Amplifier 115855 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com