HMC681LP5

HMC681LP5 / 681LP5E 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER w/ SERIAL CONTROL, DC - 1 GHz Typical Applications the HmC681lp5(e) is ideal for: • if & rf applications • Cellular/3g infrastructure • Wibro / WimaX / 4g • microwave radio & Vsat • test equipment and sensors v03.1010 Features +13.5 db to +45 db gain Control in 0.5 db steps High Output ip3: +36 dbm ±0.25 db typical gain step error single +5V supply 32 lead 5x5mm smt package: 25mm2 Functional Diagram General Description the HmC681lp5(e) is a digitally controlled variable gain amplifier which operates from dC to 1 gHz, and can be programmed to provide anywhere from 13.5 db, to 45 db of gain, in 0.5 db steps. the HmC681lp5(e) delivers noise figure of 2.8 db in its maximum gain state, with output ip3 of up to +36 dbm in any state. this serially controlled digital Vga incorporates off chip aC ground capacitors for near dC operation, making it suitable for a wide variety of rf and if applications. the HmC681lp5(e) is housed in a roHs compliant 5x5 mm Qfn leadless package, and provides the user with a highly integrated solution. this functionality is also available with parallel control as the HmC626lp5(e). 12 Variable gain amplifiers - digital - smt Electrical Specifications, TA = +25° C, Vdd = Vs= P/S= +5V parameter gain (maximum gain state) gain Control range input return loss Output return loss gain setting accuracy: (referenced to maximum gain state) all gain states Output power for 1 db Compression Output third Order intercept point (two-tone Output power= 5 dbm each tone) noise figure switching Characteristics trise, tfall (10/90% rf) tOn, tOff (50% Ctl to 10/90% rf) total supply Current min. typ. 50 - 350 40 45 31.5 25 20 30 max. min. typ. 350 - 1000 40 31.5 30 17 max. Units mHz db db db db db dbm dbm db ns ns 225 ma ± (0.15 + 3% of relative gain setting) max. ± (0.15 + 3% of relative gain setting) max. 20 38 2.7 60 120 176 225 19 36 2.8 60 120 176 12 - 1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC681LP5 / 681LP5E v03.1010 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER w/ SERIAL CONTROL, DC - 1 GHz 50 to 350 MHz Tuning Relative Gain Setting Gain vs. Frequency 50 45 40 RELATIVE GAIN (dB) 35 GAIN (dB) 30 25 20 15 10 5 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 +25C +85C -40C (Referenced to Maximum Gain State) (Only Major States are Shown) 0 -5 -10 16 dB 8 dB -15 -20 -25 -30 -35 0.05 31.5 dB 0.1 0.15 0.2 0.25 0.3 0.35 FREQUENCY (GHz) FREQUENCY (GHz) 12 Variable gain amplifiers - digital - smt 12 - 2 Input Return Loss 0 -5 RETURN LOSS (dB) (Only Major States are Shown) Output Return Loss 0 -5 31.5dB (Only Major States are Shown) 31.5dB -15 -20 -25 -30 -35 -40 0.05 2dB RETURN LOSS (dB) -10 -10 -15 -20 -25 -30 -35 -40 0.05 I.L 0.1 0.15 0.2 0.25 0.3 0.35 0.1 0.15 0.2 0.25 0.3 0.35 FREQUENCY (GHz) FREQUENCY (GHz) Bit Error vs. Frequency 2 1.5 1 BIT ERROR (dB) 0.5 0 -0.5 -1 -1.5 16dB (Only Major States are Shown) Bit Error vs. Relative Gain Setting 2 1.5 1 BIT ERROR (dB) 0.5dB 0.5 0 -0.5 -1 -1.5 350MHz 31.5dB 150, 200MHz -2 0.05 -2 0.1 0.15 0.2 0.25 0.3 0.35 0 4 8 12 16 20 24 28 32 FREQUENCY (GHz) RELATIVE GAIN SETITING (dB) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC681LP5 / 681LP5E v03.1010 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER w/ SERIAL CONTROL, DC - 1 GHz 50 to 350 MHz Tuning Relative Phase vs. Frequency (Only Major States are Shown) 60 Step Error vs. Frequency (Only Major States are Shown) 1 0.8 RELATIVE PHASE (deg) 40 STEP ERROR (dB) 8 dB 31.5 dB 0.6 0.4 0.2 0 -0.2 -0.4 -0.6 -0.8 0.15 0.2 0.25 0.3 0.35 -1 0.05 0.1 0.15 0.2 16 dB 20 0 16 dB 31.5 dB 0.5 - 16 dB -20 1 dB 12 Variable gain amplifiers - digital - smt -40 0.05 0.1 0.25 0.3 0.35 FREQUENCY (GHz) FREQUENCY (GHz) Output P1dB 24 (Major States shown are IL through 16 dB)) Output IP3 @ 5 dBm Output Power per Tone (Major States shown are IL through 16 dB) 45 I.L. 22 P1dB (dBm) IP3 (dBm) 43 I.L. 41 20 16 dB 39 18 37 16 dB 16 0.05 0.1 0.15 0.2 0.25 0.3 0.35 35 0.05 0.1 0.15 0.2 0.25 0.3 0.35 FREQUENCY (GHz) FREQUENCY (GHz) 12 - 3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC681LP5 / 681LP5E v03.1010 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER w/ SERIAL CONTROL, DC - 1 GHz 350 to 1000 MHz Tuning Relative Gain Setting Gain vs. Frequency 50 45 40 RELATIVE GAIN (dB) 35 GAIN (dB) 30 25 20 15 10 5 0 0.2 0.4 0.6 FREQUENCY (GHz) 0.8 1 +25 C +85 C -40 C (Referenced to Maximum Gain State) (Only Major States are Shown) 0 -5 -10 16 dB 8 dB -15 -20 -25 31.5 dB -30 -35 0.2 0.4 0.6 FREQUENCY (GHz) 0.8 1 12 Variable gain amplifiers - digital - smt 12 - 4 Input Return Loss 0 (Only Major States are Shown) Output Return Loss 0 -5 (Only Major States are Shown) -10 RETURN LOSS (dB) 31.5 dB 31.5 dB RETURN LOSS (dB) -10 -15 -20 -25 -30 -35 -40 0.2 I.L -20 -30 -40 I.L -50 0.2 0.4 0.6 FREQUENCY (GHz) 0.8 1 0.4 0.6 FREQUENCY (GHz) 0.8 1 Bit Error vs. Frequency 2 1.5 1 BIT ERROR (dB) 0.5 0 -0.5 -1 -1.5 -2 0.2 0.4 0.6 16 dB 31.5 dB (Only Major States are Shown) Bit Error vs. Relative Gain Setting 2 1.5 1 BIT ERROR (dB) 0.5 0 -0.5 -1 -1.5 350 MHz 1000 MHz 8 dB -2 0.8 1 0 4 8 12 16 20 24 28 32 FREQUENCY (GHz) RELATIVE GAIN SETTING (dB) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC681LP5 / 681LP5E v03.1010 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER w/ SERIAL CONTROL, DC - 1 GHz 350 to 1000 MHz Tuning Relative Phase vs. Frequency (Only Major States are Shown) 60 31.5 dB Step Error vs. Frequency (Only Major States are Shown) 1 0.8 0.6 STEP ERROR (dB) 16 dB 32 dB RELATIVE PHASE (deg) 40 16 dB 8 dB 0.4 0.2 0 -0.2 -0.4 -0.6 -0.8 20 0 0.5 - 4 dB -20 4, 8 dB 12 Variable gain amplifiers - digital - smt -40 0.2 0.4 0.6 FREQUENCY (GHz) 0.8 1 -1 0.2 0.4 0.6 FREQUENCY (GHz) 0.8 1 Output P1dB 24 (Major States shown are IL through 16 dB) Output IP3 @ 5 dBm Output Power per Tone (Major States shown are IL through 16 dB) 50 I.L. 22 P1dB (dBm) I.L. 40 IP3 (dBm) 20 30 16 dB 18 16 dB 20 16 0.2 0.4 0.6 FREQUENCY (GHz) 0.8 1 10 0.2 0.4 0.6 FREQUENCY (GHz) 0.8 1 Power-Up States if le is set to logic lOW at power-up, the logic state of pUp1 and pUp2 determines the power-up state of the part per pUp truth table. the attenuator latches in the desired power-up state approximately 200 ms after power-up. PUP Truth Table le 0 0 0 0 pUp1 0 1 0 1 pUp2 0 0 1 1 relative gain setting -31.5 -24 -16 insertion loss Power-On Sequence the ideal power-up sequence is: gnd, Vdd, digital inputs, rf inputs. the relative order of the digital inputs are not important as long as they are powered after Vdd / gnd 12 - 5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC681LP5 / 681LP5E v03.1010 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER w/ SERIAL CONTROL, DC - 1 GHz Serial Control Interface the HmC681lp5(e) contains a 3-wire spi compatible digital interface (serin, ClK, le). it is activated when p/s is kept high. the 6-bit serial word must be loaded msb first. the positive-edge sensitive ClK and le requires clean transitions. if mechanical switches were used, sufficient debouncing should be provided. When le is high, 6-bit data in the serial input register is transferred to the attenuator. When le is high ClK is masked to prevent data transition during output loading. for all modes of operations, gain will remain constant while le is kept low. 12 Variable gain amplifiers - digital - smt 12 - 6 Truth Table parameter min. serial period, tsCK Control set-up time, tCs Control hold-time, tCH le setup-time, tln min. le pulse width, tleW min le pulse spacing, tles serial clock hold-time from le, tCKn Hold time, tpH. latch enable minimum Width, tlen setup time, tps typ. 100 ns 20 ns 20 ns 10 ns 10 ns 630 ns 10 ns 0 ns 10 ns 2 ns b5 16 db High High High High High High low low b4 8db High High High High High low High low serial Word b3 4 db High High High High low High High low b2 2 db High High High low High High High low b1 1 db High High low High High High High low b0 0.5 db High low High High High High High low relative gain setting reference 0 db -0.5 db -1 db -2 db -4 db -8 db -16 db -31.5 db any combination of the above states will provide a relative gain setting approximately equal to the sum of the bits selected. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC681LP5 / 681LP5E v03.1010 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER w/ SERIAL CONTROL, DC - 1 GHz Absolute Maximum Ratings rf input power [1] (at max gain setting) digital inputs (reset, shift Clock, latch enable & serial input) bias Voltage (Vdd) Collector bias Voltage (Vcc) Channel/Junction temperature Continuous pdiss (t = 85 °C) (derate 19.8 mW/°C above 85 °C) [1] thermal resistance storage temperature -10.5 dbm (t = +85 °C) -0.5 to Vdd +0.5V 5.5V 5.5V 150 °C 1.29 W 50.8 °C/W -65 to +150 °C -40 to +85 °C Bias Voltage Vdd (V) +5 Vs (V) +5 is1 (ma) 88 idd (typ.) (ma) 5 is2 (ma) 88 Control Voltage Table state low High Vdd = +3V 0 to 0.5V @