HMC706LC3C

HMC706LC3C v02.0709 13 Gbps, NRZ-to-RZ CONVERTER, +3.3V SUPPLY Features Supports High Data Rates: up to 13 Gbps Differential & Single-Ended Operation Fast Rise and Fall Times: 15 / 13 ps Low Power Consumption: 594 mW typ. Programmable Differential Output Voltage Swing: 300 - 1200 mV Propagation Delay: 275 ps Single Supply: +3.3V 16 Lead Ceramic 3x3mm SMT Package: 9mm2 Typical Applications The HMC706LC3C is ideal for: • NRZ-to-RZ data type conversion 3 HIGH SPEED LOGIC - SMT • SONET OC-192 applications and equipment • Mach-Zehnder optical modulator drivers • Broadband test & measurement Functional Diagram General Description The HMC706LC3C is a NRZ-to-RZ converter designed to support data transmission rates of up to 13 Gbps, and clock frequencies as high as 13 GHz. During normal operation, RZ data is transferred to the outputs on the positive edge of the clock. Reversing the clock inputs allows for negative-edge triggered applications. All input signals to the HMC706LC3C are terminated with 50 Ohms to Vcc on-chip, and may be either AC or DC coupled. The differential outputs of the HMC706LC3C may be either AC or DC coupled. Outputs can be connected directly to a 50 Ohm Vcc terminated system, while DC blocking capacitors may be used if the terminating system is 50 Ohms to a non-Vcc DC voltage. The 50 Ohm termination resistors are bypassed on chip from Vcc to ground. The HMC706LC3C operates from a single +3.3V DC supply and is available in a ceramic RoHS compliant 3x3 mm SMT package. Electrical Specifications, TA = +25°C, Vcc = +3.3V Parameter Power Supply Voltage Power Supply Current Maximum Data Rate Maximum Clock Rate Input High Voltage Input Low Voltage Input Return Loss Input Ampliftude Adjustable Output Amplitude Output High Voltage Frequency H H -> L H - Negative voltage level L - Positive voltage level Outputs Q L H L F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 3-4 HMC706LC3C v02.0709 13 Gbps, NRZ-to-RZ CONVERTER, +3.3V SUPPLY Absolute Maximum Ratings Power Supply Voltage (Vcc) Input Signals Output Signals Storage Temperature Operating Temperature -0.5V to +3.6V Vcc - 2V to Vcc + 0.5V Vcc -1.5V to Vcc +1.0V -65°C to +150°C -40°C to +85°C 3 HIGH SPEED LOGIC - SMT ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 7. GROUND PADDLE MUST BE SOLDERED TO GND. 3-5 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC706LC3C v02.0709 13 Gbps, NRZ-to-RZ CONVERTER, +3.3V SUPPLY Pin Descriptions Pin Number 1, 4, 5, 8, 13, 16 Ground Paddle Function Description Interface Schematic GND Signal & Supply Ground 3 HIGH SPEED LOGIC - SMT 3-6 2, 3 NRZP, NRZN NRZ Data Inputs 6, 7 RZP, RZN RZ Data Outputs 9 Vctl Output Level Control 10 - 12 Vcc Positive Supply 14, 15 CKN, CKP Clock Inputs F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC706LC3C v02.0709 13 Gbps, NRZ-to-RZ CONVERTER, +3.3V SUPPLY Evaluation PCB 3 HIGH SPEED LOGIC - SMT List of Materials for Evaluation PCB 118372 [1] Item J1, J2, J9 J3 - J8 C1 C7 C8, C11 C9, C12 C10 R1 - R5 U1 PCB [2] Description DC Pin K Connector 10 pF Capacitor, 0402 Pkg. 1 nF Capacitor, 0402 Pkg. 100 nF Capacitor, 0603 Pkg. 4.7 µF Case A, Tantalum 100 pF Capacitor, 0402 Pkg. 0 Ohm Resistor, 0402 Pkg. HMC706LC3C High Speed Logic, NRZ to RZ Converter 118370 Evaluation Board The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. The exposed package base should be connected to ground. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR, FR4 3-7 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC706LC3C v02.0709 13 Gbps, NRZ-to-RZ CONVERTER, +3.3V SUPPLY Application Circuit 3 HIGH SPEED LOGIC - SMT F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 3-8