HMC710LC5_10

HMC710LC5 v03.0110 GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz Features High conversion Gain: 12 dB sideband rejection: -20 dBc 2 LO to rF isolation: 12 dB Output iP3: +30 dBm 32 Lead 5x5mm smT Package: 25mm² 9 mixers - i/q mixers, irms & receivers - smT Typical Applications The Hmc710Lc5 is ideal for: • Point-to-Point and Point-to-multi-Point radio • military radar, eW & eLiNT • satellite communications • sensors Functional Diagram General Description The Hmc710Lc5 is a compact GaAs mmic i/q upconverter in a leadless roHs compliant smT package. This device provides a small signal conversion gain of 12 dB with -20 dBc of sideband rejection. The Hmc710Lc5 utilizes a driver amplifier preceded by an i/q mixer where the LO is driven by an active x2 multiplier. iF1 and iF2 mixer inputs are provided and an external 90° hybrid is needed to select the required sideband. The i/q mixer topology reduces the need for filtering of the unwanted sideband. The Hmc710Lc5 is a much smaller alternative to hybrid style single sideband upconverter assemblies and it eliminates the need for wire bonding by allowing the use of surface mount manufacturing techniques. Electrical Specifications, Parameter Frequency range, rF Frequency range, LO Frequency range, iF conversion Gain sideband rejection 1 dB compression (Output) 2 LO to rF isolation 2 LO to iF isolation [2] iP3 (Output) supply current idd1 supply current idd2 supply current idd3 TA = +25 °C, IF = 1000 MHz, LO = +6 dBm, Vdd1, 2, 3 = +5V, Idd2 + Idd3 = 150 mA [1][3] min. Typ. 16 - 21 7.5 - 11 Dc - 3.5 7 -12 12 -20 20 12 20 30 52 24 96 90 30 120 108 max. Units GHz GHz GHz dB dBc dBm dB dB dBm mA mA mA [1] Unless otherwise noted all measurements performed with high side LO, iF = 1000 mHz and external 90° iF hybrid. [2] Data taken without external iF hybrid. [3] Adjust vgg between -2 to 0v to achieve idd2 + idd3 = 150 mA Typical. 9-1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC710LC5 v03.0110 GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz Conversion Gain vs. LO Drive 20 18 CONVERSION GAIN (dB) 16 14 12 10 8 6 4 +3 dBm +6 dBm +9 dBm Data Taken as SSB Upconverter with External IF Hybrid Conversion Gain vs. Temperature 20 18 CONVERSION GAIN (dB) 16 14 12 10 8 6 4 16 17 18 19 20 21 22 RF FREQUENCY (GHz) +25 C +85 C -40 C 9 mixers - i/q mixers, irms & receivers - smT 9-2 16 17 18 19 20 21 22 RF FREQUENCY (GHz) Conversion Gain vs. IF Frequency 20 18 CONVERSION GAIN (dB) 16 14 12 10 8 6 4 15 16 17 18 19 20 21 22 23 24 RF FREQUENCY (GHz) IF = 100MHz IF = 1000MHz Conversion Gain vs. Idd2 + Idd3 20 18 CONVERSION GAIN (dB) 16 14 12 10 8 6 4 16 17 18 19 20 21 22 RF FREQUENCY (GHz) Idd1+Idd2 = 110mA Idd1+Idd2 = 130mA Idd1+Idd2 = 150mA RF, LO Return Loss 0 IF Return Loss [1] 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 0 1 2 3 4 5 6 7 8 IF FREQUENCY (GHz) IF1 IF2 -5 RETURN LOSS (dB) RF LO -10 -15 -20 -25 2 4 6 8 10 12 14 16 18 20 22 24 FREQUENCY (GHz) [1] Data taken without external iF hybrid For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC710LC5 v03.0110 GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz Output P1dB vs. Temperature 24 23 Data Taken as SSB Upconverter with External IF Hybrid SIDEBAND REJECTION (dBc) 9 mixers - i/q mixers, irms & receivers - smT Side Band Rejection 0 -10 P1dB (dBm) 22 21 20 19 18 17 +25 C +85 C -40 C -20 -30 -40 16 17 18 19 20 21 22 RF FREQUENCY (GHz) 16 16 17 18 19 20 21 22 RF FREQUENCY (GHz) Output IP3 vs. Temperature 34 Output IP3 vs. LO Drive 34 32 32 IP3 (dBm) IP3 (dBm) 30 30 28 +25 C +85 C -40 C 28 +3 dBm +6 dBm 26 26 24 16 17 18 19 20 21 22 RF FREQUENCY (GHz) 24 16 17 18 19 20 21 22 RF FREQUENCY (GHz) Output IP3 vs. IF Frequency 34 IF = 100MHz IF = 1000MHz Output IP3 vs. Idd2 + Idd3 34 32 32 IP3 (dBm) 28 IP3 (dBm) 30 30 28 Idd1+Idd2 = 110mA Idd1+Idd2 = 130mA Idd1+Idd2 = 150mA 26 26 24 16 17 18 19 20 21 22 RF FREQUENCY (GHz) 24 16 17 18 19 20 21 22 RF FREQUENCY (GHz) 9-3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC710LC5 v03.0110 GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz Isolations with LO [1] 0 -10 ISOLATION (dB) -20 -30 -40 -50 -60 -70 LO/RF LO/IF1 LO/IF2 Isolations with 2LO [1] 0 -10 ISOLATION (dB) -20 -30 -40 -50 -60 -70 16 17 18 19 20 21 22 RF FREQUENCY (GHz) 2LO/RF IF1/RF 2LO/IF1 IF2/RF 2LO/IF2 9 mixers - i/q mixers, irms & receivers - smT 9-4 16 17 18 19 20 21 22 RF FREQUENCY (GHz) MxN Spurious Outputs [1] nLO miF 0 1 2 3 4 0 xx 61 35 61 52 1 19 0 32 38 62 2 48 66 53 72 73 3 xx xx xx xx xx 4 xx xx xx xx xx Harmonics of LO LO Freq. (GHz) 8 9 10 11 12 13 14 nLO spur @ iF Port 1 42 35 38 42 34 39 22 2 21 24 19 25 18 32 35 3 25 47 49 44 50 55 52 4 64 50 47 51 xx xx xx iF = 1 GHz @ 0 dBm LO = 9.75 GHz @ +6 dBm Data taken without iF hybrid All values in dBc below rF power level (-1iF + 2LO) [1] Data taken without external iF hybrid For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC710LC5 v03.0110 GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz 9 mixers - i/q mixers, irms & receivers - smT Absolute Maximum Ratings Drain Bias voltage (vdd1, 2, 3) Gate Bias voltage (vgg) iF input Power (iF1, iF2) LO Drive (LO iN) channel Temperature continuous Pdiss (T = 85°c) (derate 16.2 mW/°c above 85°c) Thermal resistance (channel to ground paddle) storage Temperature Operating Temperature esD sensitivity (HBm) 5.25v -3 to 0v 20 dBm 20 dBm 175 °c 1.46 mW 61.8 °c/W -65 to +150 °c -55 to +85 °c class 1A eLecTrOsTATic seNsiTive Device OBserve HANDLiNG PrecAUTiONs Outline Drawing NOTes: 1. PAcKAGe BODY mATeriAL: ALUmiNA 2. LeAD AND GrOUND PADDLe PLATiNG: 30 - 80 micrOiNcHes GOLD Over 50 micrOiNcHes miNimUm NicKLe 3. DimeNsiONs Are iN iNcHes [miLLimeTers] 4. LeAD sPAciNG TOLerANce is NON-cUmULATive 5. PAcKAGe WArP sHALL NOT exceeD 0.05mm DATUm 6. ALL GrOUND LeADs AND GrOUND PADDLe mUsT Be sOLDereD TO PcB rF GrOUND 9-5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC710LC5 v03.0110 GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz Typical Application 9 mixers - i/q mixers, irms & receivers - smT 9-6 c1 - c3 c4 - c7 c8 - c11 100 pF 1000 pF 2.2 µF For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC710LC5 v03.0110 GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz 9 mixers - i/q mixers, irms & receivers - smT Pin Descriptions Pin Number 1 - 5, 7, 8, 11, 16, 17, 19, 20, 22 - 28 Function N/c Description No connection required. These pins may be connected to rF/Dc ground without affecting performance. interface schematic 6 vdd1 Power supply voltage for x2 multiplier. see application circuit for required external components. 9 LOiN This pin is Ac coupled and matched to 50 Ohms. These pins and package bottom must be connected to rF/Dc ground. 10, 13, 15, 30, 32 GND 12 vgg Gate control for rF amplifier, please follow “mmic Amplifier Biasing Procedure” application note. see application circuit for required external components This pin is Ac coupled and matched to 50 Ohms. 14 rFOUT 18, 21 vdd2, vdd3 Power supply voltage for rF amplifier. see application circuit for required external components. 29 iF1 31 iF2 Differential iF input pins. For applications not requiring operation to Dc, an off chip Dc blocking capacitor should be used. For operation to Dc this pin must not source/sink more than 3mA of current or part non function and possible part failure will result. 9-7 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC710LC5 v03.0110 GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz Evaluation PCB 9 mixers - i/q mixers, irms & receivers - smT 9-8 List of Materials for Evaluation PCB 120412 [1] item J1, J2 J3, J4 J5 - J12 c1 - c3 c4 c5 - c7 c8 - c11 U1 PcB [2] Description PcB mount smA sri connector PcB mount smA connector Dc Pin 100 pF capacitor, 0402 Pkg. 1000 pF capacitor, 0402 Pkg. 1000 pF capacitor, 0603 Pkg. 2.2 µF Tantalum capacitor case A Hmc710Lc5 Upconverter 120410 evaluation Board The circuit board used in the application should use rF circuit design techniques. signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] reference this number when ordering complete evaluation PcB [2] circuit Board material: Arlon 25Fr, Fr4 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com