HMC733LC4B_11

HMC733LC4B v03.0411 WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 10 - 20 GHz Features Wide Tuning Bandwidth Pout: +3 dBm Low SSB Phase Noise: -90 dBc/Hz @100 kHz No External Resonator Needed Single Positive Supply: +5V @ 70 mA RoHS Compliant 4 x 4 mm SMT Package Typical Applications Low Noise wideband MMIC VCO is ideal for: • Industrial/Medical Equipment • Test & Measurement Equipment • Military Radar, EW & ECM Functional Diagram General Description The HMC733LC4B is a wideband MMIC Voltage Controlled Oscillator which incorporates the resonator, negative resistance device, and varactor diode. Output power and phase noise performance are excellent over temperature due to the oscillator’s monolithic construction. The Vtune port accepts an analog tuning voltage from 0 to +22V. The HMC733LC4B VCO operates from a single +5V supply, consumes only 70 mA of current, and is housed in a RoHS compliant SMT package. This wideband VCO uniquely combines the attributes of ultra small size, low phase noise, low power consumption, and wide tuning range. 8 WIDEBAND VCOS - SMT Electrical Specifications, TA = +25° C, Vcc = +5V Parameter Frequency Range Power Output SSB Phase Noise @ 10 kHz Offset SSB Phase Noise @ 100 kHz Offset Tune Voltage (Vtune) Supply Current (Icc) (Vcc = +5V) Tune Port Leakage Current (Vtune = +23V) Output Return Loss 2nd Harmonic Pulling (into a 2.0:1 VSWR) Vcc Pushing, Vtune = +20V, F = 20 GHz Frequency Drift Rate @ 10 GHz Frequency Drift Rate @ 20 GHz -0.25 70 25 10 -20 15 -90 -0.25 -0.80 Min. Typ. 10 - 20 3 -60 -90 23 Max. Units GHz dBm dBc/Hz dBc/Hz V mA µA dB dBc MHz pp MHz/V MHz/°C MHz/°C 8-1 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC733LC4B v03.0411 WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 10 - 20 GHz Frequency vs. Tuning Voltage, Vcc = +5V 22 21 Frequency vs. Tuning Voltage, T = +25 °C 22 21 OUTPUT FREQUENCY (GHz) 19 18 17 16 15 14 13 12 11 10 9 -1 1 3 5 7 9 11 13 15 17 19 21 23 25 +25C +85C -40C OUTPUT FREQUENCY (GHz) 20 20 19 18 17 16 15 14 13 12 11 10 9 -1 1 3 5 7 9 11 13 15 17 19 21 23 25 4.75V 5.00V 5.25V TUNING VOLTAGE (V) TUNING VOLTAGE (V) Sensitivity vs. Tuning Voltage, Vcc= +5V, T = +25 °C 800 Output Power vs. Tuning Voltage, Vcc= +5V 8 7 6 +25C +85C -40C TUNING SENSITIVITY (MHz/VOLT) 700 OUTPUT POWER (dBm) 600 500 400 300 200 100 +25C +85C -40C 5 4 8 WIDEBAND VCOS - SMT 8-2 3 2 1 0 -1 -2 -1 1 3 5 7 9 11 13 15 17 19 21 23 25 -1 1 3 5 7 9 11 13 15 17 19 21 23 25 TUNING VOLTAGE (V) TUNING VOLTAGE (V) SSB Phase Noise vs. Tuning Voltage, T = +25 °C -20 -30 10 kHz 100 kHz 1 MHz Typical SSB Phase Noise vs. Temperature Vtune = +10V -10 -30 -50 -70 -90 SSB PHASE NOISE (dBc/Hz) -40 -50 -60 -70 -80 -90 -100 -110 -120 -130 -1 1 3 5 7 9 11 13 SSB PHASE NOISE (dBc/Hz) + 25C + 85C - 40C -110 -130 -150 1e+3 15 17 19 21 23 25 1e+4 1e+5 1e+6 1e+7 TUNING VOLTAGE (V) OFFSET FREQUENCY (Hz) F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC733LC4B v03.0411 WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 10 - 20 GHz Supply Current vs. Vcc, T = +25 °C 80 75 Absolute Maximum Ratings Vcc Vtune Storage Temperature +5.5 Vdc -1.0 to +25V -65 to +150 °C Class 1A 70 ESD Sensitivity (HBM) Icc (mA) 65 60 4.75V 5.00V 5.25V -1 1 3 5 7 9 11 13 15 17 19 21 23 25 Reliability Information Junction Temperature To Maintain 1 Million Hour MTTF Nominal Junction Temperature (T = 85 °C) Thermal Resistance (Junction to GND paddle, 5V supply) Operating Temperature 135 °C 119 °C 97 °C/W -40 °C to +85 °C 55 50 TUNING VOLTAGE (V) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing 8 WIDEBAND VCOS - SMT NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER Ni. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED Pin Descriptions Pin Number 1 - 3, 5 - 11, 13, 17 - 24 Function N/C Description TO PCB RF GROUND. Interface Schematic No Connection. These pins may be connected to RF/DC ground. Performance will not be affected. 4 Vtune Control Voltage and Modulation Input. Modulation bandwidth dependent on drive source impedance. 8-3 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC733LC4B v03.0411 WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 10 - 20 GHz Pin Descriptions Pin Number (Continued) Description Interface Schematic Function 12 Vcc Supply Voltage Vcc= +5V 14, 16 GND Package bottom has an exposed metal paddle that must also be RF & DC grounded. 15 RFOUT RF output (AC coupled) Evaluation PCB 8 WIDEBAND VCOS - SMT 8-4 List of Materials for Evaluation PCB 108648 [1] Item J1 J2 J3 C1 C2 U1 PCB [2] Description PCB Mount SMA RF Connector, Johnson PCB Mount SMA Connector, SRI DC Header 1000 pF Capacitor, 0402 Pkg. 4.7 µF Capacitor, Tantalum HMC733LC4B VCO 108646 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed ground paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com