HMC744LC3C_10

HMC744LC3C v03.1209 13 Gbps, FAST RISE TIME 1:2 FANOUT BUFFER w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Typical Applications The HMC744LC3C is ideal for: • RF ATE Applications Features Inputs Terminated Internally in 50 Ohms Differential & Single-Ended Operation Propagation Delay: 120 ps Fast Rise and Fall Times: 22 / 20 ps Programmable Differential Output Voltage Swing: 600 - 1100 mV Low Power Consumption: 287 mW typ. Single Supply: +3.3V 16 Lead Ceramic 3x3mm SMT Package: 9mm2 3 HIGH SPEED LOGIC - SMT • Broadband Test & Measurement • Serial Data Transmission up to 13 Gbps • Clock Buffering up to 13 GHz Functional Diagram General Description The HMC744LC3C is a 1:2 Fanout Buffer designed to support data transmission rates up to 13 Gbps, and clock frequencies as high as 13 GHz. The HMC744LC3C also features an output level control pin, VR, which allows for loss compensation or for signal level optimization. All input and output signals to the HMC744LC3C are terminated with 50 Ohms to Vcc on-chip, and may be either AC or DC coupled. Inputs or outputs can be connected directly to a 50 Ohm to Vcc terminated system, while DC blocking capacitors may be used if the terminating system is 50 Ohms to ground. The HMC744LC3C operates from a single +3.3V DC supply, and is available in a ceramic RoHS compliant 3x3 mm SMT package. Electrical Specifications, TA = +25 ºC Vcc = +3.3V Parameter Power Supply Voltage Power Supply Current Maximum Data Rate Maximum Clock Rate Input High Voltage Input Low Voltage Input Return Loss Output Amplitude Output High Voltage Output Low Voltage Output Rise / Fall Time Single-Ended, 20% - 80% Frequency