HMC788LP2E

HMC788LP2E v02.0311 pHEMT GAIN BLOCK MMIC AMPLIFIER, DC - 10 GHz Features p1dB output power: +20 dBm output ip3: +30 dBm Gain: 14 dB 50 ohm i/o’s 6 lead 2x2 mm Dfn smT package: 4 mm2 8 Amplifiers - Driver & GAin Block - smT Typical Applications The Hmc788lp2e is ideal for: • cellular/3G & lTe/WimAX/4G • lo Driver Applications • microwave radio • Test & measurement equipment • UWB communications Functional Diagram General Description The Hmc788lp2e is a GaAs pHemT Gain Block mmic smT Dc to 10 GHz amplifier. This 2x2 mm Dfn packaged amplifier can be used as either a cascadable 50 ohm gain stage or to drive the lo port of many of Hittite’s single and double-balanced mixers with up to +20 dBm output power. The Hmc788lp2e offers 14 dB of gain and an output ip3 of +30 dBm while requiring only 76 mA from a +5v supply. The Darlington feedback pair exhibits reduced sensitivity to normal process variations and yields excellent gain stability over temperature while requiring a minimal number of external bias components. Electrical Specifications, Vcc = 5V, TA = +25° C parameter Gain Gain variation over Temperature return loss input return loss output reverse isolation output power for 1 dB compression (p1dB) output Third order intercept (ip3) noise figure supply current (icq) note: Data taken with broadband bias tee on device output. Dc - 6.0 GHz 6.0 - 10.0 GHz Dc - 6.0 GHz 6.0 - 10.0 GHz Dc - 6.0 GHz 6.0 - 10.0 GHz Dc - 6.0 GHz 6.0 - 10.0 GHz Dc - 10.0 GHz Dc - 6.0 GHz 6.0 - 10.0 GHz Dc - 6.0 GHz 6.0 - 10.0 GHz Dc - 6.0 GHz 6.0 - 10.0 GHz 18 15 min. 12 9 Typ. 14 12 0.012 0.025 16 9 9 15 25 20 18 30 27 7 9 76 max. Units dB dB dB/ °c dB/ °c dB dB dB dB dB dBm dBm dBm dBm dB mA 8-1 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC788LP2E v02.0311 pHEMT GAIN BLOCK MMIC AMPLIFIER, DC - 10 GHz Gain vs. Temperature 20 Broadband Gain & Return Loss 30 S21 S11 S22 20 8 Amplifiers - Driver & GAin Block - smT 8-2 RESPONSE (dB) 10 15 0 GAIN (dB) -10 10 +25 C +85 C -40 C -20 5 0 2 4 6 8 10 12 14 16 0 2 4 6 8 10 12 -30 FREQUENCY (GHz) FREQUENCY (GHz) Input Return Loss vs. Temperature 0 -5 Output Return Loss vs. Temperature 0 -5 RETURN LOSS (dB) RETURN LOSS (dB) -10 +25 C +85 C -40 C -10 -15 -15 +25 C +85 C -40 C -20 -20 -25 -25 -30 0 2 4 6 8 10 12 -30 0 2 4 6 8 10 12 FREQUENCY (GHz) FREQUENCY (GHz) Reverse Isolation vs. Temperature -10 Noise Figure vs. Temperature 20 REVERSE ISOLATION (dB) -20 +25 C +85 C -40 C NOISE FIGURE (dB) -15 15 +25 C +85 C -40 C 10 -25 5 -30 0 2 4 6 8 10 12 0 0 2 4 6 8 10 12 FREQUENCY (GHz) FREQUENCY (GHz) F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC788LP2E v02.0311 pHEMT GAIN BLOCK MMIC AMPLIFIER, DC - 10 GHz Psat vs. Temperature 25 8 Amplifiers - Driver & GAin Block - smT P1dB vs. Temperature 25 20 20 P1dB (dBm) Psat (dBm) +25 C +85 C -40 C 15 15 10 10 +25 C +85 C -40 C 5 0 2 4 6 8 10 12 5 0 2 4 6 8 10 12 FREQUENCY (GHz) FREQUENCY (GHz) Power Compression @ 1 GHz 60 Power Compression @ 10 GHz 30 Pout (dBm), GAIN (dB), PAE (%) 50 Pout Gain PAE Pout (dBm), GAIN (dB), PAE (%) 40 20 Pout Gain PAE 30 20 10 10 0 -10 -5 0 5 10 0 -10 -5 0 5 10 INPUT POWER (dBm) INPUT POWER (dBm) Output IP3 vs. Temperature [1] 35 Gain & Power vs. Supply Voltage @ 1 GHz 40 30 GAIN (dB), P1dB (dBm), IP3 (dBm) 30 IP3 (dBm) 25 Gain P1dB IP3 20 +25 C +85 C -40 C 20 15 10 0 2 4 6 8 10 12 10 4.5 5 5.5 FREQUENCY (GHz) SUPPLY VOLTAGE (V) [1] +5 dBm / Tone output power 8-3 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC788LP2E v02.0311 pHEMT GAIN BLOCK MMIC AMPLIFIER, DC - 10 GHz Typical Supply Current Vcc (V) 4.5 5.0 5.5 Icq (mA) 64 76 Absolute Maximum Ratings collector Bias voltage (vcc) rf input power (rfin)(vs = +5v) Junction Temperature continuous pdiss (T = 85 °c) (derate 10.4 mW/°c above 85 °c) Thermal resistance (junction to ground paddle) storage Temperature operating Temperature esD sensitivity (HBm) +7v +15 dBm 150 °c 0.68 W 96 °c/W -65 to +150 °c -40 to +85 °c class 1A 8 Amplifiers - Driver & GAin Block - smT 8-4 88 elecTrosTATic sensiTive Device oBserve HAnDlinG precAUTions Outline Drawing noTes: 1. leADfrAme mATeriAl: copper AlloY 2. Dimensions Are in incHes [millimeTers] 3. leAD spAcinG TolerAnce is non-cUmUlATive 4. pAD BUrr lenGTH sHAll Be 0.15mm mAXimUm. pAD BUrr HeiGHT sHAll Be 0.05mm mAXimUm. 5. pAckAGe WArp sHAll noT eXceeD 0.05mm. 6. All GroUnD leADs AnD GroUnD pADDle mUsT Be solDereD To pcB rf GroUnD. 7. refer To HiTTiTe ApplicATion noTe for sUGGesTeD lAnD pATTern. Package Information part number Hmc788lp2e package Body material roHs-compliant low stress injection molded plastic lead finish 100% matte sn msl rating msl1 [2] package marking [1] 788 XXXX [1] 4-Digit lot number XXXX [2] max peak reflow temperature of 260 °c F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC788LP2E v02.0311 pHEMT GAIN BLOCK MMIC AMPLIFIER, DC - 10 GHz 8 Amplifiers - Driver & GAin Block - smT Pin Descriptions pin number 1, 4, 6 function n/c Description The pins are not connected internally; however, all data shown herein was measured with these pins connected to rf/Dc ground externally. This pin is Dc coupled. An off chip Dc blocking capacitor is required. interface schematic 2 rfin 5 rfoUT rf output and Dc Bias for the output stage. 3 GnD This pin and exposed ground paddle must be connected to rf/Dc ground. Application Circuit 8-5 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC788LP2E v02.0311 pHEMT GAIN BLOCK MMIC AMPLIFIER, DC - 10 GHz Evaluation PCB 8 Amplifiers - Driver & GAin Block - smT 8-6 List of Materials for Evaluation PCB 129550 item J1 - J2 J5, J6 c1, c2 c3 c4 r1 l1 U1 pcB [2] Description pc mount smA connector 2 mm Dc Header 0.01 µf capacitor, 0502 pkg. 100 pf capacitor, 0402 pkg. 2.2 µf case A pkg. 0 ohm resistor, 0402 pkg. inductor, conical 6.35 µH Hmc788lp2e 129549 evaluation pcB [1] The circuit board used in the application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] reference this number when ordering complete evaluation pcB [2] circuit Board material: rogers 4350 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com