HMC839LP6CE
v02.1010
FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO 1050 - 1205, 2100 - 2410, 4200 - 4820 MHz
Features
• rF Bandwidth: 1050 - 1205, 2100 - 2410, 4200 - 4820 MHz • Ultra Low Phase noise -112 dBc/Hz in Band typ. • Figure of Merit (FOM) -227 dBc/Hz • < 180 fs rMS Jitter • 24-bit Step Size, resolution 3 Hz typ • exact Frequency resolution Mode • Built-In digital Self test • 40 Lead 6x6 mm SMt Package: 36 mm2
Typical Applications
7
PLLS w/ Integrated VCO - SMt
• Cellular/4g Infrastructure • repeaters and Femtocells • Communications test equipment • CatV equipment
• Phased array applications • ddS replacement • Very High data rate radios
Functional Diagram
7-1
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC839LP6CE
v02.1010
FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO 1050 - 1205, 2100 - 2410, 4200 - 4820 MHz
General Description
the HMC839LP6Ce is a fully functioned Fractional-n Phase-Locked-Loop (PLL) Frequency Synthesizer with an Integrated Voltage Controlled Oscillator (VCO). the synthesizer consists of an integrated low noise VCO with a triband output, an autocalibration subsystem for low voltage VCO tuning, a very low noise digital Phase detector (Pd), a precision controlled charge pump, a low noise reference path divider and a fractional divider. the fractional synthesizer features an advanced delta-sigma modulator design that allows both ultra-fine step sizes and low spurious products. the phase detector (Pd) features cycle slip prevention (CSP) technology to allow faster frequency hopping times. Ultra low in-close phase noise and low spurious also allows wider loop bandwidths for faster frequency hopping and low micro-phonics. For theory of operation and register map refer to the “ PLLs w/ Integrated VCOs - rF VCOs Operating guide”. To view the Operating Guide, please visit www.hittite.com and choose HMC839LP6CE from the “Search by Part Number” pull down menu.
Parameter
Condition
Min.
typ.
Max.
Units
RF Output Characteristics
VCO Frequency at PLL Input rF Output Frequency at f VCO/2 rF Output Frequency at f VCO rF Output Frequency at 2f VCO rF Output Power at f VCO/2 rF Output Power at f VCO rF Output Power at 2f VCO VCO tuning Sensitivity VCO Supply Pushing rF Output fo/2 Harmonic rF Output 3fo/2 Harmonic rF Output 2nd Harmonic rF Output 5fo/2 Harmonic rF Output 3rd Harmonic rF Output 7fo/2 Harmonic rF Output 4th Harmonic Measured at fo, 2V (n= 0/15/31) Measured at fo, 2V doubler Mode doubler Mode fo/2/fo/2fo doubler Mode fo/2/fo/2fo doubler Mode fo/2/fo/2fo 2100 1050 2100 4200 7.5 3.5 -9 10 2200 1100 2200 4400 10 7 -4 13 1.6 -26 -35 -23 / -28 / -41 -48 -30 / -34 / -55 -55 -32 / -52 / -58 2410 1205 2410 4820 12.5 12 1 18 MHz MHz MHz MHz dBm dBm dBm MHz/V MHz/V dBc dBc dBc dBc dBc dBc dBc
RF Divider Characteristics
19-Bit n-divider range (Integer) 19-Bit n-divider range (Fractional) Max = 219 - 1 Fractional nominal divide ratio varies (-3 / +3) dynamically max 16 20 524,287 524,283
REF Input Characteristics
ref Input Frequency Synthesizer phase noise can degrade by about 5dB when operating with a reference frequency near the low end of this range. aC Coupled 10 50 200 MHz
ref Input range ref Input Capacitance 14-Bit r-divider range
1
2
3.3 5
Vp-p pF
1
16,383
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
7-2
PLLS w/ Integrated VCO - SMt
RVDD, AVDD, DVDD3V, VCCPD, VCCHF, VCCPS = 3.3V ±6% GNDCP = GNDLS = Ground Paddle = 0V, 100 MHz Reference Unless Otherwise Noted.
Electrical Specifications, TA = +25° C, VPPCP, VDDCP, VCC1, VCC2 = 5V ±4%;
7
HMC839LP6CE
v02.1010
FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO 1050 - 1205, 2100 - 2410, 4200 - 4820 MHz
Electrical Specifications (Continued)
Parameter Condition
[1]
Min.
typ.
Max.
Units
Phase Detector (PD)
Pd Frequency Fractional Feedback Mode Pd Frequency Fractional Feedforward Mode (and register 6 [17:16] = 10) Pd Frequency Integer Mode
[1]
0.1 0.1 0.1
100 80 125
MHz MHz MHz
Charge Pump
Output Current Charge Pump gain Step Size Pd/Charge Pump SSB Phase noise Input referred, Maximum CP Current -132 -142 add 1 dB for Fractional add 3 dB for Fractional -151 -155 -149 -153 -147 -151 dBc/Hz dBc/Hz dBc/Hz dBc/Hz 0.02 20 2.54 ma µa
7
PLLS w/ Integrated VCO - SMt
100 Hz 1 kHz 10 kHz 100 kHz
Logic Inputs
VIH Output High Voltage VIL Output Low Voltage dVdd3V-0.4 0 dVdd3V 0.4 V V
Logic Outputs
VOH Output High Voltage VOL Output Low Voltage dVdd3V-0.4 0 dVdd3V 0.4 V V
Power Supply Voltages
analog 3.3V Supplies digital Supply analog 5V Supplies aVdd, VCCHF, VCCPS, VCCPd, rVdd dVdd3V VPPCP, VddCP, VCC1, VCC2 3.0 3.0 4.8 3.3 3.3 5 3.5 3.5 5.2 V V V
Power Supply Currents
+5V analog Charge Pump +5V VCO, PLL Buffer and rF Buffer +3.3V analog +3.3V digital Power down - Crystal Off Power down - Crystal On, 100 MHz VPPCP, VddCP VCC1 + VCC2 (fo / 2 / fo / 2fo) aVdd, VCCHF, VCCPS, VCCPd, rVdd dVdd3V reg 01h=0, Crystal not Clocked reg 01h=0, Crystal Clocked 100 MHz 5.3 89 / 73 / 72 45 6.5 10 10 200 ma ma ma ma µa µa
Power on Reset
typical reset Voltage on dVdd Min dVdd Voltage for no reset Power on reset delay 1.5 250 700 mV V µs
VCO Open Loop Phase Noise at fo/2
10 kHz Offset 100 kHz Offset 1 MHz Offset -91 -121 -146 dBc/Hz dBc/Hz dBc/Hz
note 1: this maximum phase detector frequency can only be achieved if the minimum n value is respected. eg. In the case of fractional feedback mode, the maximum PFd rate = fvco/20 or 100 MHz, whichever is less.
7-3
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC839LP6CE
v02.1010
FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO 1050 - 1205, 2100 - 2410, 4200 - 4820 MHz
Electrical Specifications (Continued)
Parameter 10 MHz Offset 100 MHz Offset Condition Min. typ. -162 -163 Max. Units dBc/Hz dBc/Hz
VCO Open Loop Phase Noise at fo
10 kHz Offset 100 kHz Offset 1 MHz Offset 10 MHz Offset 100 MHz Offset -85 -116 -140 -161 -166 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz
VCO Open Loop Phase Noise at 2fo
10 kHz Offset 100 kHz Offset 1 MHz Offset 10 MHz Offset 100 MHz Offset -80 -109 -135 -155 -158 dBc/Hz dBc/Hz dBc/Hz dBc/Hz
7
PLLS w/ Integrated VCO - SMt
7-4
dBc/Hz
Closed Loop Phase Noise PLL + VCO at fvco/2
Integer, 100 MHz Pd Integer, 100 MHz Pd Integer, 100 MHz Pd Fractional, 100 MHz Pd Fractional, 100 MHz Pd Fractional, 100 MHz Pd 1 kHz Offset 10 kHz Offset 100 kHz Offset 1 kHz Offset 10 kHz Offset 100 kHz Offset -117 -121 -121 -113 -116 -117 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz
Closed Loop Phase Noise PLL + VCO at fvco
Integer, 100 MHz Pd Integer, 100 MHz Pd Integer, 100 MHz Pd Fractional, 100 MHz Pd Fractional, 100 MHz Pd Fractional, 100 MHz Pd 1 kHz Offset 10 kHz Offset 100 kHz Offset 1 kHz Offset 10 kHz Offset 100 kHz Offset -109 -115 -112 -106 -110 -114 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz
Closed Loop Phase Noise PLL + VCO at 2fo
Integer, 100 MHz Pd Integer, 100 MHz Pd Integer, 100 MHz Pd Fractional, 100 MHz Pd Fractional, 100 MHz Pd Fractional, 100 MHz Pd 1 kHz Offset 10 kHz Offset 100 kHz Offset 1 kHz Offset 10 kHz Offset 100 kHz Offset normalized 1 Hz Measured w/ 50 MHz Pd at 30 kHz Offset Measured w/ 50 MHz Pd at 30 kHz Offset -229 -227 dBc/Hz dBc/Hz -103 -108 -107 -100 -104 -106 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz
Synthesizer Figure of Merit
Integer Mode Fractional Mode
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC839LP6CE
v02.1010
FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO 1050 - 1205, 2100 - 2410, 4200 - 4820 MHz
Closed Loop Integer Phase Noise
-70 -90 -110 -130 -150 -170 1000
Typical Closed Loop Fractional Phase Noise [1]
-70
PHASE NOISE (dBc/Hz)
4400MHz
2200MHz
PHASE NOISE (dBc/Hz)
-90
4377MHz 2193MHz
-110 1102MHz
1100MHz
-130
-150
10
4
7
PLLS w/ Integrated VCO - SMt
0 -20 -40 PHASE NOISE (dBc/Hz) -60 -80 -100 -120 -140 -160 -180 3 10 10
4
10 10 FREQUENCY OFFSET(Hz)
5
6
10
7
10
8
-170 1000
10
4
10
5
10
6
10
7
10
8
FREQUENCY OFFSET (Hz)
Free Running Phase Noise
Typical Tuning Curves vs. Switch Position
1100
fmax
1050
n0
n2
1102MHz KVCO (MHz/V) 2193MHz 4377MHz fmax 1000
n4 n6 n8 n10 n12 n14
950
fmin
900
n16 n18 n20 n22 n24 n26
n30 n31
10
5
10
6
10
7
10
8
OFFSET FREQUENCY (Hz)
0
1
2 3 TUNING VOLTAGE (V)
4
5
Free Running VCO Phase Noise Over Temperature
-110 100 kHz Offset +27C +85C -40C -120
Typical VCO Tuning Voltage After Calibration
TUNE VOLTAGE AFTER CALIBRATION (V) 5 4 fmin 3 2 1 0 31 15 fmax 0
PHASE NOISE (dBc/Hz)
-130
-140 1 MHz Offset -150 10 MHz Offset -160
-170 2050 2100 2150 2200 2250 2300 2350 2400 2450
2000
2100
2200
2300
2400
2500
FREQUENCY (MHz)
VCO FREQUENCY
[1] Fractional Mode, 100 MHz Crystal, r=1
7-5
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC839LP6CE
v02.1010
FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO 1050 - 1205, 2100 - 2410, 4200 - 4820 MHz
Typical VCO Sensitivity vs. Cap @ Fo Voltage
60 50 KVCO (MHz/V) 40 30 20 10 0 +25C 0 1 2 3 TUNING VOLTAGE (V) 4 5 Tuning Cap 0, 2458MHz at 2V
PHASE NOISE (dBc/Hz)
Typical Spurious @ 200 kHz from Integer Boundary
0 -20 -40 -60 -80 -100 -120 -140 -160 1000 10
4
2200.200MHz 100MHz PFD Fractional Mode 200kHz Offset from Integer Boundary 70kHz Loop Bandwidth 200kHz, -76dBc 400kHz, -75Bc 100MHz, -99dBc
Tuning Cap 15, 2200MHz at 2V Tuning Cap 31, 2032MHz at 2V Typ Operating Range
10 10 10 FREQUENCY OFFSET (Hz)
5
6
7
10
8
15 OUTPUT POWER (dBm) 10 5 0 -5
Divide by 2
Fundamental -40C 27C 85C Doubler
NORMALIZED PHASE NOISE (dBc/Hz)
20
-200
-210 Typ FOM vs Offset -220 FOM 1/f Noise -230 FOM Floor
-10 1000
2000
3000
4000
5000
-240 100
1000
10
4
10
5
10
6
OUTPUT FREQUENCY(MHz)
FREQUENCY OFFSET (Hz)
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
7-6
PLLS w/ Integrated VCO - SMt
Typical Output Power Narrow Band Match
7
Figure of Merit
HMC839LP6CE
v02.1010
FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO 1050 - 1205, 2100 - 2410, 4200 - 4820 MHz
Pin Descriptions
Pin number 1 2, 5, 6, 8, 9, 11 - 14, 18 - 22, 24, 26, 34, 37, 38 3 4 7 10 15 Function aVdd description dC Power Supply for analog circuitry. the pins are not connected internally; however, all data shown herein was measured with these pins connected to rF/dC ground externally. Power Supply for charge pump analog section Charge Pump Output Power Supply for the charge pump digital section reference Supply reference Oscillator Input dC Power Supply for digital (CMOS) Circuitry Chip enable. Connect to logic high for normal operation. VCO Varactor. tuning Port Input. VCO analog Supply 2 VCO analog Supply 1 rF Positive Output rF negative Output PLL Serial Port enable (CMOS) Logic Input PLL Serial Port data (CMOS) Logic Input PLL Serial Port Clock (CMOS) Logic Input Lock detect, or Serial data, or general Purpose (CMOS) Logic Output (gPO) dC Power Supply for analog Circuitry dC Power Supply for analog Prescaler dC Power Supply for Phase detector external bypass decoupling for precision bias circuits. note: 1.920V ±20mV reference voltage (BIaS) is generated internally and cannot drive an external load. Must be measured with 10gΩ meter such as agilent 34410a, normal 10MΩ dVM will read erroneously.
n/C VPPCP CP VddCP rVdd XreFP dVdd3V Cen VtUne VCC2 VCC1 rF_n [1] rF_P
[1]
7
PLLS w/ Integrated VCO - SMt
16 17 23 25 27 28 29 30 31 32 33 35 36 39
Sen SdI SCK Ld_SdO VCCHF VCCPS VCCPd
40
BIaS
[1] For doubler mode of operation, pin 28 (rF_n) and pin 29 (rF_P) outputs must be shorted together.
7-7
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC839LP6CE
v02.1010
FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO 1050 - 1205, 2100 - 2410, 4200 - 4820 MHz
Absolute Maximum Ratings
aVdd, rVdd, dVdd3V, VCCPd, VCCHF, VCCPS VPPCP, VddCP, VCC1 VCC2 Operating temperature Storage temperature Maximum Junction temperature thermal resistance (rtH) (junction to ground paddle) reflow Soldering Peak temperature time at Peak temperature eSd Sensitivity (HBM) 260°C 40 sec Class 1B -0.3V to +3.6V -0.3V to +5.8V -0.3V to +5.5V -40°C to +85°C -65°C to 125°C 125 °C 20 °C/W
Stresses above those listed under absolute Maximum ratings may cause permanent damage to the device. this is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability.
7
PLLS w/ Integrated VCO - SMt
H839 XXXX
Outline Drawing
nOteS: 1. LeadFraMe MaterIaL: COPPer aLLOY 2. dIMenSIOnS are In InCHeS [MILLIMeterS]. 3. Lead SPaCIng tOLeranCe IS nOn-CUMULatIVe 4. Pad BUrr LengtH SHaLL Be 0.15mm MaXIMUM. Pad BUrr HeIgHt SHaLL Be 0.05mm MaXIMUM. 5. PaCKage WarP SHaLL nOt eXCeed 0.05mm. 6. aLL grOUnd LeadS and grOUnd PaddLe MUSt Be SOLdered tO PCB rF grOUnd. 7. reFer tO HIttIte aPPLICatIOn nOte FOr SUggeSted PCB Land Pattern.
Package Information
Part number HMC839LP6Ce Package Body Material roHS-compliant Low Stress Injection Molded Plastic Lead Finish 100% matte Sn MSL rating MSL1 Package Marking [1]
[1] 4-digit lot number XXXX
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
7-8
HMC839LP6CE
v02.1010
FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO 1050 - 1205, 2100 - 2410, 4200 - 4820 MHz
Evaluation PCB, fo & fo/2 Modes
7
PLLS w/ Integrated VCO - SMt
the circuit board used in the application should use rF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from Hittite upon request.
Evaluation PCB Schematic
To view this evaluation PCB Schematic please visit www.hittite.com and choose HMC839LP6CE from the
“Search by Part Number” pull down menu to view the product splash page.
7-9
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC839LP6CE
v02.1010
FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO 1050 - 1205, 2100 - 2410, 4200 - 4820 MHz
List of Materials for Evaluation PCB 129513, fo & fo/2 Modes
Item J1, J2 J3 J4 - J6 C1, C15 - C17, C25 C2, C3, C6, C7, C11, C12, C14, C18, C27, C43, C45 C4, C13 C5, C33 C8 C19 - C24, C28, C30, C32, C34 C26 C29 C35 C36 C37, C38 C39 - C42, C44 r1, r2, r5, r8, r11, r15, r18, r19, r21, r24 r3, r4 r6, r7 r12, r20, r29 r22, r25 r26 - r28 L1 tP3, tP4 U1 U2 Y1 PCB [2] description PCB Mount SMa rF Connector dual row terminal Strip Connector Header 10 µF Capacitor, 0805 Pkg. 0.47 µF Capacitor, 0402 Pkg. 22 pF Capacitor, 0402 Pkg. 1000 pF Capacitor, 0402 Pkg. 3.9 pF Capacitor, 0402 Pkg. 0.1 µF Capacitor, 0402 Pkg. 1 µF Capacitor, 0603 Pkg. 47 pF Capacitor, 0402 Pkg. 3300 pF Capacitor, 0402 Pkg. 270 pF Capacitor, 0402 Pkg. 68 pF Capacitor, 0402 Pkg. 4.7 µF tantalum Capacitor, 0805 Pkg 0 Ohm resistor, 0402 Pkg. 1 Ohm resistor, 0402 Pkg. 0 Ohm resistor, 0805 Pkg. 51 Ohm resistor, 0402 Pkg. 20 kOhm resistor, 0402 Pkg. 1k Ohm resistor, 0402 Pkg. 3.9 nH Inductor, 0402 Pkg. test Point PC Compact SMt HMC839LP6Ce PLL with Integrated VCO HMC860LP3e Low noise Quad Linear regulator 3.3V, 50 MHz VCXO Crystal Oscillator 125998 evaluation Board [1]
7
PLLS w/ Integrated VCO - SMt
7 - 10
[1] reference this number when ordering complete evaluation PCB [2] Circuit Board Material: rogers 4350 or arlon 25Fr and Fr4
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC839LP6CE
v00.0310
FRACTIONAL-N SYNTHESIZER w/ INTEGRATED VCO 1050 - 1205, 2100 - 2410, 4200 - 4820 MHz
Evaluation PCB, 2xfo Mode
7
PLLS w/ Integrated VCO - SMt
the circuit board used in the application should use rF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from Hittite upon request.
Evaluation PCB Schematic
To view this evaluation PCB Schematic please visit www.hittite.com and choose HMC839LP6CE from the
“Search by Part Number” pull down menu to view the product splash page.
7 - 11
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC839LP6CE
v00.0310
FRACTIONAL-N SYNTHESIZER w/ INTEGRATED VCO 1050 - 1205, 2100 - 2410, 4200 - 4820 MHz
List of Materials for Evaluation PCB 129514, 2xfo Mode
Item J1, J2 J3 J4 - J6 C1, C15 - C17, C25 C2, C3, C6, C7, C11, C12, C14, C18, C27, C43, C45 C4, C13 C5, C33 C8 C19 - C24, C28, C30, C32, C34 C26 C29 C31 C35 C36 C37, C38 C39 - C42, C44 C46 C47 r1, r2, r8, r11, r15, r18, r19, r21, r24 r3, r4 r12, r20, r29 r13, r14, r30 r22, r25 r26 - r28 r31 r32, r33 L1 L2, L3 L4 tP3, tP4 U1 U2 Y1 PCB [2] description PCB Mount SMa rF Connector dual row terminal Strip Connector Header 10 µF Capacitor, 0805 Pkg. 0.47 µF Capacitor, 0402 Pkg. 22 pF Capacitor, 0402 Pkg. 1000 pF Capacitor, 0402 Pkg. 8.2 pF Capacitor, 0402 Pkg. 0.1 µF Capacitor, 0402 Pkg. 1 µF Capacitor, 0603 Pkg. 1 pF Capacitor, 0402 Pkg. 0.7 pF Capacitor, 0402 Pkg. 3300 pF Capacitor, 0402 Pkg. 270 pF Capacitor, 0402 Pkg. 68 pF Capacitor, 0402 Pkg. 4.7 µF tantalum Capacitor, 0805 Pkg 27 pF Capacitor, 0402 Pkg. 47 pF Capacitor, 0402 Pkg. 0 Ohm resistor, 0402 Pkg. 1 Ohm resistor, 0402 Pkg. 51 Ohm resistor, 0402 Pkg. 220 kOhm resistor, 0402 Pkg. 20 kOhm resistor, 0402 Pkg. 1 kOhm resistor, 0402 Pkg. 0 Ohm resistor, 0201 Pkg. 0 Ohm resistor, 0805 Pkg. 15 nH Inductor, 0402 Pkg. 47 nH Inductor, 0402 Pkg. 0 Ohm resistor, 0402 Pkg. test Point PC Compact SMt HMC839LP6Ce PLL with Integrated VCO HMC860LP3e Low noise Quad Linear regulator 3.3V, 50 MHz VCXO Crystal Oscillator 127729 evaluation Board [1]
7
PLLS w/ Integrated VCO - SMt
7 - 12
[1] reference this number when ordering complete evaluation PCB [2] Circuit Board Material: rogers 4350 or arlon 25Fr and Fr4
F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com
工商网监
湘ICP备2023018690号
