HMC866LC3C

HMC866LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Typical Applications The HMC866LC3C is ideal for: • 100 Gbps Ethernet Features Supports Data Rates up to 43 Gbps. Low Power Dissipation: 280 mW @ Vcc = +3.3V Differential Small Signal Gain: 29 dB Input Sensitivity: 20 mVp-p Differential 3-dB Bandwidth: 26.5 GHz Adjustable Output Voltage Swing up to 800 mVp-p Differential 16 Lead 3x3mm SMT package: 9mm2 10 LIMITING AMPLIFIERS - SMT • 100 Gbps Long Haul • 40 Gbps (D)QPSK Receivers • Broadband Gain Block for Test & Measurement Equipment Functional Diagram General Description The HMC866LC3C is a Limiting Amplifier packaged in a leadless 3x3 mm ceramic surface mount package. The amplifier supports up to 43 Gbps operation and provides 29 dB of differential gain. The output voltage swing is adjustable up to 800 mVp-p differential by using the VAC analog control input and the additive RMS jitter is less than 300 fs for 32 Gbps operation. The amplifier allows external offset correction function to both inputs and outputs. All input/output RF signals of the HMC866LC3C are terminated with 50 Ohms to +3.3V internally and may be either AC or DC coupled. The outputs of the device can be operated either differentially or singleended. Outputs can be connected directly to 50 Ohm terminated system referenced to 3.3V, while DC blocking capacitors may be used if the terminating system is 50 Ohms to a non 3.3V level. Electrical Specifi cations, TA = +25° C, Vcc = +3.3V, Vee = 0V, Icc = 85mA Parameter Differential Small Signal Gain Data Rate Small Signal Bandwidth Input Return Loss Output Return Loss Input Sensitivity Maximum Input Swing Differential Output Swing Rise Time [1] 3-dB cutoff Up to 26.5 GHz Up to 26.5 GHz Differential Differential Adjustable by using VAC 20% - 80% @ 32 Gbps 250 13 10 10 20 1,000 800 Conditions VAC = 1.6V 32 26.5 Min. Typ. 29 Max. Units dB Gbps GHz dB dB mVp-p mVp-p mVpp ps [1] Vin = Differential 50 mVp-p, fin = 32 Gbps PRBS 223-1 pattern 10 - 22 F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC866LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Electrical Specifi cations (Conditions) Parameter Fall Time [1] Additive Random Jitter [2] Conditions 20% - 80% @ 32 Gbps Vin = 50 mVp-p (Differential) @ 15 GHz @ 25 GHz Min. Typ. 13 Max. Units ps 300 32 32 1 1.6 -6 3.13 3.3 85 3.47 fs nV/rtHz nV/rtHz V Input referred voltage noise VAC Input Output P1dB Power Supply Voltage Supply Current [1] Vin = Differential 50 mVp-p, fin = 32 Gbps PRBS 223-1 pattern [2] Random jitter is measured with 32 Gbps 10101… pattern 10 LIMITING AMPLIFIERS - SMT 10 - 23 @ 16 GHz dBm V mA VAC = 1.6V Differential Gain & Return Loss vs. Frequency [1][2] 40 30 20 Differential Output vs. Supply Voltage [1] 1000 DIFFERENTIAL VOLTAGE (mVp-p) RESPONSE (dB) 10 0 -10 -20 -30 -40 800 S21 S11 S22 600 +25C +85C -40C 0 5 10 15 20 25 30 35 40 400 3.13 3.19 3.24 3.3 3.36 3.41 3.47 FREQUENCY (GHz) SUPPLY VOLTAGE Vcc (V) Differential Output vs. Control Voltage [2] 1000 Differential Output vs. Vinput & Temperature @ 16 GHz [1][2] 1000 DIFFERENTIAL VOLTAGE (mVp-p) 800 +25C +85C -40C 600 DIFFERENTIAL VOLTAGE (mVp-p) 100 400 +25C +85C -40C 200 0 1 1.1 1.2 1.3 1.4 1.5 1.6 10 1 10 100 1000 CONTROL VOLTAGE VAC (V) SINGLE-ENDED Vin (mVp-p) [1] VAC = 1.6V [2] Vcc = 3.3V F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC866LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Differential Output vs. Vinput & Supply Voltage @ 16 GHz [1] 1000 Differential Output vs. Vinput & Frequency [1] [2] DIFFERENTIAL VOLTAGE (mVp-p) 1000 10 LIMITING AMPLIFIERS - SMT DIFFERENTIAL VOLTAGE (mVp-p) 100 Vcc = 3.3V Vcc = 3.13V Vcc = 3.47V 100 2 GHz 10 GHz 16 GHz 20 GHz 10 1 10 100 1000 10 1 10 100 1000 SINGLE-ENDED Vin (mVp-p) SINGLE-ENDED Vin (mVp-p) Peak to Peak Jitter vs. Supply Voltage [1][3] 8 Rise & Fall Time vs. Supply Voltage [1][3] RISE TIME, FALL TIME 20%-80% (ps) 16 7 P-P JITTER (ps) 12 6 8 5 Rise Time Fall Time 4 3.13 3.19 3.24 3.3 3.36 3.41 3.47 4 3.13 3.19 3.24 3.3 3.36 3.41 3.47 SUPPLY VOLTAGE Vcc (V) SUPPLY VOLTAGE Vcc (V) DC Current vs. Supply Voltage [1][3] 150 125 DC Current vs. Control Voltage [2][3] 150 125 DC CURRENT (mA) 100 DC CURRENT (mA) 100 75 +25C +85C -40C 75 50 50 25 25 +25C +85C -40C 0 3.13 0 3.19 3.24 3.3 3.36 3.41 3.47 1 1.1 1.2 1.3 1.4 1.5 1.6 SUPPLY VOLTAGE Vcc (V) CONTROL VOLTAGE VAC (V) [1] VAC = 1.6V [2] Vcc = 3.3V [3] Input Data: Differential 50 mVp-p 32 Gbps NRZ PRBS 223 -1 pattern 10 - 24 F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC866LC3C v00.1209 32 Gbps LIMITING AMPLIFIER 32 Gbps Output Eye Diagram Measurements Current Eye Amp Jitter p-p Rise Time Fall Time 383 mV 6.378 ps 13.22 ps 13.22 ps Minimum 383 mV 5.289 ps 13.07 ps 10.11 ps Maximum 384 mV 6.378 ps 13.53 ps 13.53 ps Total Meas 69 69 69 10 LIMITING AMPLIFIERS - SMT 10 - 25 69 Time Scale: 7 ps/div Amplitude Scale: 100 mV/div Test Conditions: VAC = 1.6V, Vcc = 3.3V Input Data: Differential 50 mVp-p 32 Gbps NRZ PRBS 223-1 pattern 22.5 Gbps Output Eye Diagram Measurements Current Eye Amp Jitter p-p Rise Time Fall Time 403 mV 8.889 ps 13.33 ps 14.22 ps Minimum 402 mV 7.111 ps 13.33 ps 13.78 ps Maximum 404 mV 8.889 ps 13.78 ps 15.11 ps Total Meas 83 83 83 83 Time Scale: 20 ps/div Amplitude Scale: 81.3 mV/div Test Conditions: VAC = 1.6V, Vcc = 3.3V Input Data: Differential 50 mVp-p 22.5 Gbps NRZ PRBS 223-1 pattern 40 Gbps Output Eye Diagram Measurements Current Eye Amp Jitter p-p Rise Time Fall Time 351 mV 6.222 ps 11.56 ps 11.78 ps Minimum 351 mV 5.333 ps 11.33 ps 11.56 ps Maximum 352 mV 6.222 ps 11.56 ps 12.00 ps Total Meas 62 62 62 62 Time Scale: 10 ps/div Amplitude Scale: 80.1 mV/div Test Conditions: VAC = 1.6V, Vcc = 3.3V Input Data: Differential 80 mVp-p 40 Gbps NRZ PRBS 223-1 pattern F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC866LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Absolute Maximum Ratings Power Supply Voltage (Vcc) Input Voltage -0.5V to +3.6V (Vcc -1.3V) to (Vcc +0.5) (Vcc -1V) to (Vcc +0.5) -0.5V to +2.5V 125 °C 0.49W 81.83 °C/W -65 to 125 °C -40 to +85 °C 10 LIMITING AMPLIFIERS - SMT ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Output Voltage Output Amplitude Control Voltage (VAC) Junction Temperature Continuous Pdiss (T = 85°C) (Derate 12.22 mW/°C above 85°C) Thermal Resistance (Rth) (junction to ground paddle) Storage Temperature Operating Temperature Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 7. PADDLE MUST NOT BE DC GND. THERMAL DISSIPATION PATH ONLY. 10 - 26 F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC866LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Pin Descriptions Pin Number Function Description Interface Schematic 1, 4, 9, 12 GND Signal grounds should be connected to 0V. 10 LIMITING AMPLIFIERS - SMT 10 - 27 2, 3 INP, INN Data Inputs 5, 16 INNDC, INPDC DC Offset Inputs 6 Vee Supply grounds should be connected to 0V. 7 VAC Output amplitude control voltage 8, 13 QNDC, QPDC DC monitor outputs. F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC866LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Pin Descriptions (Continued) Pin Number Function Description Interface Schematic 10 LIMITING AMPLIFIERS - SMT 10, 11 QN, QP Data outputs. 14, 15 Vcc Positive Supply Ground Paddle GND Ground paddle must be connected to DC ground. 10 - 28 F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC866LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Evaluation PCB 10 LIMITING AMPLIFIERS - SMT List of Materials for Evaluation PCB 128125 [1] Item J1 - J8 J9 - J12 C1, C3, C5, C7, C11, C13 C2, C4, C6, C8, C12, C14 C16, C18, C22 R1, R2, R4, R6, R7 R8 U1 PCB [2] Description DC Pin K-type Connector 0.1 μF Capacitor, 0603 Pkg. 1000 pF Capacitor, 0603 Pkg. 4.7 μF Capacitor, Tantalum 0 Ohm Resistor, 0402 Pkg. 0 Ohm Resistor, 0603 Pkg. HMC866LC3C Limiting Amplifier 126150 Evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR or Rogers 4350 F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 29 HMC866LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Application Circuit 10 LIMITING AMPLIFIERS - SMT Component C2, C4, C6, C8, C12, C14 C1, C3, C5, C7, C11, C13 C16, C18 - C22 Value 1 nF 0.1 μF 4.7 μF 10 - 30 F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC866LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Notes: 10 LIMITING AMPLIFIERS - SMT F or price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 31