HMC910LC4B

HMC910LC4B v02.0910 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Features Very Wide Bandwidth: dC - 24 gHz Continuous adjustable delay range: 70 ps Single-ended or differential operation adjustable differential output Voltage Swing: 170 - 760 mVp-p @ 24 gHz delay Control modulation Bandwidth: 10 mHz Single Supply: +3.3V 24 lead Ceramic 4x4mm Smt Package: 16mm² Typical Applications the HmC910lC4B is ideal for: • Synchronization of clock and data • transponder design • Serial data transmission up to 32 gbps • Broadband test & measurement • rF ate applications 13 BroadBand time delay - analog - Smt Functional Diagram General Description the HmC910lC4B is a broadband time delay with 0 to 70 ps continuously adjustable delay range. the delay control is linearly monotonic with respect to the control voltage, VdC and the control input has a modulation bandwidth of 10 mHz. the device provides a differential output voltage with constant amplitude for single-ended or differential input voltages above the input sensitivity level, while the output voltage swing may be adjusted using the VaC control pin. the HmC910lC4B features internal temperature compensation and bias circuitry to minimize delay variations with temperature. the device also features an enable pin, enB. all rF input and outputs of the HmC910lC4B are internally terminated with 50 ohms to Vcc, and may either be aC or dC coupled. output pins can be connected directly to a 50 ohm to Vcc terminated system, while dC blocking capacitors must be used if the terminated system input is 50 ohms to a dC voltage other than Vcc. Electrical Specifications, TA = +25° C, Vcc = 3.3V, Vee = 0V, GND = 0V Parameter Power Supply Voltage Power Supply Current Conditions ± %9 tolerance VaC = 2.6V @ 10 gHz time delay range @ 20 gHz @ 24 gHz maximum data rate maximum Clock Frequency delay Control modulation Bandwidth delay Control Voltage (VdC) output amplitude Control Voltage (VaC) 1.1 1.7 2.6 min. 3 400 59 63 67 32 24 10 2.3 2.7 typ. 3.3 475 62.5 66.5 70.5 max. 3.6 550 Units V ma ps ps ps gbps gHz mHz V V 13 - 1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC910LC4B v02.0910 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Electrical Specifications, TA = +25° C, Vcc = 3.3V, Vee = 0V, GND = 0V (Continued) Parameter input Voltage range, Cml input low Voltage input High Voltage input amplitude Conditions dC Coupled Vil ViH Single-ended, peak-to-peak differential, peak-to-peak differential, peak-to-peak @ 10 gHz output amplitude differential, peak-to-peak @ 20 gHz differential, peak-to-peak @ 24 gHz input return loss output return loss deterministic Jitter, Jd [1] additive random Jitter, Jr rise time, tr [1] min. typ. Vcc max. 1.7 Vcc-25 Vcc+500 1000 2000 1020 880 760 Units V mV mV mVp-p mVp-p mVp-p mVp-p mVp-p dB dB ps, pp Vcc-500 Vcc+25 50 100 210 190 170 Vcc-200 Vcc+200 frequency < 25 gHz frequency < 25 gHz 12 14 6 @24 gHz clock input 14 14 @20 gHz clock input @ 20 gHz clock input 360 -0.03 0.3 ps, rms ps 13 BroadBand time delay - analog - Smt 13 - 2 Fall time, tf [1] Propagation delay, td time delay temperature Sensitivity ps ps ps/°C [1] Vdata = differential 300 mVp-p, fdata = 22.5 gbps PrBS 223 -1 pattern Time Delay vs. VDC & Frequency [1] 80 Time Delay vs. VDC & Supply Voltage [1][2] 80 60 TIME DELAY (ps) 40 TIME DELAY (ps) 10 GHz 20 GHz 24 GHz 22.5 Gbps 60 Vcc=3.0V Vcc=3.3V Vcc=3.6V 40 20 20 0 1.1 1.3 1.5 1.7 1.9 2.1 2.3 0 1.1 1.3 1.5 1.7 1.9 2.1 2.3 DELAY CONTROL VOLTAGE VDC (V) DELAY CONTROL VOLTAGE VDC (V) Time Delay vs. VDC & Temperature [1][2] 80 60 TIME DELAY (ps) +25C +70C -40C 40 20 0 1.1 1.3 1.5 1.7 1.9 2.1 2.3 [1] VaC = 2.6V [2] input Frequency: 20 gHz DELAY CONTROL VOLTAGE VDC (V) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC910LC4B v02.0910 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Programmable Max. Time Delay Range vs. Frequency & Supply Voltage [1] 80 Programmable Max. Time Delay Range vs. Frequency & Temperature [1] 80 70 70 TIME DELAY (ps) 60 TIME DELAY (ps) 60 50 +25C +70C -40C 50 Vcc=3.0V Vcc=3.3V Vcc=3.6V 40 0 5 10 15 20 25 40 0 5 10 15 20 25 13 BroadBand time delay - analog - Smt FREQUENCY (GHz) FREQUENCY (GHz) Differential Output Swing vs. Supply Voltage [1][2][3] 1000 DC Current vs. Supply Voltage [1][2][3] 550 DIFFERENTIAL VOLTAGE (mVp-p) 900 DC CURRENT (mA) +25C +70C -40C 450 800 700 350 +25C +70C -40C 250 600 500 3 3.15 3.3 3.45 3.6 3 3.15 3.3 3.45 3.6 SUPPLY VOLTAGE VCC (V) SUPPLY VOLTAGE VCC (V) Differential Output Swing vs. VAC [2][3] 1000 DC Current vs. VAC [2][3] 550 DIFFERENTIAL VOLTAGE (mVp-p) 800 DC CURRENT (mA) +25C +70C -40C 450 600 400 350 +25C +70C -40C 250 200 0 1.7 1.9 2.1 2.3 2.5 2.7 1.7 1.9 2.1 2.3 2.5 2.7 AMPLITUDE CONTROL VOLTAGE VAC (V) AMPLITUDE CONTROL VOLTAGE VAC (V) [1] VaC = 2.6V [2] VdC = 1.1V [3] input Frequency: 20 gHz 13 - 3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC910LC4B v02.0910 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Peak-to-Peak Jitter vs. VDC [1][3][4] 18 Differential Output Swing vs. Frequency [1][2] 1100 DIFFERENTIAL VOLTAGE (mVp-p) 900 16 700 P-P JITTER (ps) +25C +70C -40C 14 500 +25C +70C -40C 12 300 0 5 10 15 20 25 10 1.1 1.3 1.5 1.7 1.9 2.1 2.3 FREQUENCY (GHz) DELAY CONTROL VOLTAGE VDC (V) 13 BroadBand time delay - analog - Smt 13 - 4 Rise Time vs. VDC [1][3] 20 +25C +70C -40C Fall Time vs. VDC [1][3] 20 +25C +70C -40C 18 18 16 FALL TIME (ps) 1.1 1.3 1.5 1.7 1.9 2.1 2.3 RISE TIME (ps) 16 14 14 12 12 10 10 1.1 1.3 1.5 1.7 1.9 2.1 2.3 DELAY CONTROL VOLTAGE VDC (V) DELAY CONTROL VOLTAGE VDC (V) RMS Jitter vs. VDC & Temperature [1][5] 0.5 +25C +70C -40C RMS Jitter vs. VDC & Supply Voltage [1][5] 0.5 Vcc=3V Vcc=3.3V Vcc=3.6V 0.4 RMS JITTER (ps) 0.4 RMS JITTER (ps) 2.3 0.3 0.3 0.2 0.2 0.1 0.1 0 1.1 1.3 1.5 1.7 1.9 2.1 0 1.1 1.3 1.5 1.7 1.9 2.1 2.3 DELAY CONTROL VOLTAGE VDC (V) DELAY CONTROL VOLTAGE VDC (V) [1] VaC = 2.6V [2] VdC = 1.1V [3] input data rate: 22.5 gbps PrBS 223 -1 [4] Source jitter was not deembeded [5] random jitter is calculated with the formula rJadded = √ [ (rJtested)2 – (rJsystem)2 ] at 24 gHz clock signal For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC910LC4B v02.0910 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Return Loss vs. Frequency [1][2][3] 0 -10 RESPONSE (dB) -20 -30 -40 Input Output -50 0 5 10 15 20 25 13 BroadBand time delay - analog - Smt FREQUENCY (GHz) Output Eye Diagram Continuous Snapshot for 24 GHz Input time Scale: 10 ps/div amplitude Scale: 80 mV/div test Conditions: VCC = 3.3V, VaC = 2.6V, VdC = varied from 1.6V to 1.9V (%25 of the whole delay range) input data: Single ended 300 mVp-p 24 gHz clock signal measurement result: time delay = 34 ps Output Eye Diagram Continuous Snapshot for 10 Gbps Input time Scale: 20 ps/div amplitude Scale: 100 mV/div test Conditions: VCC = 3.3V, VaC = 2.6V, VdC = varied from 1.1V to 2.3V (%100 of the whole delay range) input data: differential 300 mVp-p 10 gbps nrZ PrBS 223 -1 pattern measurement result: time delay = 61.5 ps [1] VaC = 2.6V [2] VdC = 1.1V [3] device measured on evaluation board with single-ended time domain gating 13 - 5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC910LC4B v02.0910 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Absolute Maximum Ratings Power Supply Voltage (Vcc) input Voltage Channel temperature (tc) Continuous Pdiss (t = 85 °C) (derate 54.96 mW/°C above 85 °C) thermal resistance (junction to ground paddle) Storage temperature operating temperature -0.5V to +3.7V Vcc -1.2V to Vcc +0.5V 125 °C 2.2 W 18.20 °C/W -65 to +150 °C -40 to +70 °C eleCtroStatiC SenSitiVe deViCe oBSerVe Handling PreCaUtionS 13 BroadBand time delay - analog - Smt 13 - 6 Outline Drawing noteS: 1. PaCKage Body material: alUmina 2. lead and groUnd Paddle Plating: 30 - 80 miCroinCHeS gold oVer 50 miCroinCHeS minimUm niCKle 3. dimenSionS are in inCHeS [millimeterS] 4. lead SPaCing toleranCe iS non-CUmUlatiVe 5. PaCKage WarP SHall not eXCeed 0.05mm datUm 6. all groUnd leadS and groUnd Paddle mUSt Be Soldered to PCB rF groUnd For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC910LC4B v02.0910 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Pin Descriptions Pin number 1, 6, 18 2, 5, 14, 17 Package Bottom Function n/C description the pins are not connected internally; however, all data shown herein was measured with these pins connected to rF/dC ground externally. Signal grounds should be connected to 0V. ground paddle must be connected to dC ground interface Schematic gnd 3, 4 inP, inn differential Signal inputs 13 BroadBand time delay - analog - Smt 7, 10, 12, 13 Vee Supply grounds should be connected to 0V. 8 Vdc time delay control pin. 9 enB enable pin for the time delay. For normal operation; leave the pin open or apply +3.3V. to disable the part apply 0V. When disabled total current consumption drops to 15ma. 11 Vac output amplitude control pin. 15, 16 Qn, QP differential Signal outputs 13 - 7 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC910LC4B v02.0910 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Pin Descriptions (Continued) Pin number Function description interface Schematic 19 - 24 Vcc Positive supply Application Circuit 13 BroadBand time delay - analog - Smt For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 13 - 8 HMC910LC4B v02.0910 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Evaluation PCB 13 BroadBand time delay - analog - Smt List of Materials for Evaluation PCB 129874 [1] item J1 - J4 J7 J8 C1, C8, C10, C12, C14 C2, C7, C9, C11, C13 C15, C16, C17, C19, C20 U1 PCB [2] description K Connector 10 Pin dC Connector 4 Pin dC Connector 1000 pF Capacitor, 0603 Pkg. 0.1 µF Capacitor, 0603 Pkg. 4.7 µF Capacitor, tantalum HmC910lC4B analog Phase Shifter 126490 evaluation Board [1] reference this number when ordering complete evaluation PCB [2] Circuit Board material: rogers 4350 or arlon 25 Fr the circuit board used in the application should use rF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appropriate heat sink. the evaluation circuit board shown is available from Hittite upon request. 13 - 9 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC910LC4B v02.0910 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Notes: 13 BroadBand time delay - analog - Smt For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 13 - 10