HMC926LP5E

HMC926LP5E v00.0810 0.5 dB LSB 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 700 - 2700 MHz Features Gain Control Range (in 0.5 dB Steps): @ 900 MHz, +6.5 to +38 dB @ 1900 MHz, +1 to +32.5 dB @ 2600 MHz, -4 to +27.5 dB High Output IP3: +45 dBm Noise Figure: 4.4 dB Convenient Serial Control Interface ±0.25 dB Typical Step Error 32 Lead 5x5 mm SMT Package: 25 mm2 Typical Applications The HMC926LP5E is ideal for: • Cellular Infrastructure • WiBro, WiMAX and LTE/4G • Microwave Radio & VSAT • Test Equipment and Sensors • IF & RF Applications 12 VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT Functional Diagram General Description The HMC926LP5E is a digitally controlled variable gain amplifier which operates from 700 MHz to 2700 MHz, and can be programmed to provide between +6.5 dB to +38 dB of gain, in 0.5 dB steps at 900 MHz. Gain control range is from +1 dB to +32.5 dB at 1900 MHz and from -4 dB to +27.5 dB at 2600 MHz. The HMC926LP5E delivers noise figure of 4.4 dB in its maximum gain state, with output IP3 of up to +45 dBm. The HMC926LP5E features a serial only gain control interface, a user selectable power up state, and a serial output for cascading other Hittite serially controlled components. Electrical Specifications, TA = +25° C, Vs = +5V Parameter Frequency Range Gain (Maximum Gain State) Gain Control Range Input Return Loss Output Return Loss Attenuation Accuracy: (Referenced to Maximum Gain State) Output Power for 1 dB Compression Output Third Order Intercept Point (Pout = 0 dBm per tone, 1 MHz spacing) Noise Figure Switching Characteristics tON (50% CTL to 90% RF) / tOFF (50% CTL to 10% RF) Total Current 162 36 900 MHz Tune [1] Min. Typ. 0.7 - 1.2 38 31.5 16 13 ± (0.4 + 5% of Attenuation Setting) 21 24 45 4.4 218 262 162 30 Max. 1900 MHz Tune [2] Min. Typ. 1.8 - 2.4 32.5 31.5 19 10 ± (0.5 + 6% of Attenuation Setting) 22 25 40 4.8 218 262 162 25.5 Max. 2600 MHz Tune [3] Min. Typ. 2.3 - 2.7 27.5 31.5 13 13 ± (0.5 + 6% of Attenuation Setting) 22 25 45 4.9 400 / 150 218 262 Max. Units GHz dB dB dB dB dB dBm dBm dB ns mA [1] See Evaluation PCB and Application Circuit for 900 MHz Tune. Unless otherwise noted, typical performance at 900 MHz, with maximum gain state. [2] See Evaluation PCB and Application Circuit for 1900 MHz Tune. Unless otherwise noted, typical performance at 1900 MHz, with maximum gain state. [3] See Evaluation PCB and Application Circuit for 2600 MHz Tune. Unless otherwise noted, typical performance at 2600 MHz, with maximum gain state. 12 - 1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC926LP5E v00.0810 0.5 dB LSB 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 700 - 2700 MHz 900 MHz Tune [1] Maximum Gain vs. Frequency [2] 44 NORMALIZED ATTENUATION (dB) 40 36 GAIN (dB) 32 28 24 20 0.7 Normalized Attenuation (Only Major States are Shown) 0 -4 -8 -12 -16 -20 -24 -28 -32 0.7 0.8 0.9 1 1.1 1.2 FREQUENCY (GHz) 1.3 1.4 1.5 0 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB 31.5 dB +25 C +85 C -40 C 0.8 0.9 1 1.1 1.2 FREQUENCY (GHz) 1.3 1.4 1.5 12 VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT 12 - 2 Input Return Loss (Only Major States are Shown) 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 0.7 0 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB 31.5 dB Output Return Loss (Only Major States are Shown) 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 0.7 0 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB 31.5 dB 0 dB 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 FREQUENCY (GHz) FREQUENCY (GHz) Bit Error vs. Frequency (Only Major States are Shown) 2 1.5 1 BIT ERROR (dB) 0.5 0 -0.5 -1 -1.5 -2 0.7 0.8 0.9 1 0 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB 31.5 dB 16 dB 8 dB 31.5 dB Bit Error vs. Attenuation State 1.5 1.25 1 BIT ERROR (dB) 0.75 0.5 0.7 GHz 0.8 GHz 0.7 GHz 0.8 GHz 0.9 GHz 1.0 GHz 1.1 GHz 1.2 GHz 0.9 GHz, 1 GHz 1.1 GHz, 1.2 GHz 0.25 0 -0.25 1.4 1.5 -0.5 0 4 8 12 1.1 1.2 1.3 16 20 24 28 32 FREQUENCY (GHz) ATTENUATION STATE (dB) [1] See Evaluation PCB and Application Circuit for 900 MHz Tune. [2] Maximum gain state with digital attenuation set to minimum attenuation. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC926LP5E v00.0810 0.5 dB LSB 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 700 - 2700 MHz 900 MHz Tune [1] Relative Phase vs. Frequency (Only Major States are Shown) 24 16 8 0 -8 -16 16 dB 31.5 dB Step Error vs. Frequency (Only Major States are Shown) 1 0.8 4 dB, 8 dB 0 dB 0.5 dB 1 dB 2 dB 8 dB 4 dB 8 dB 16 dB 31.5 dB RELATIVE PHASE (deg) STEP ERROR (dB) 0 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB 31.5 dB 0.6 0.4 0.2 0 -0.2 -0.4 -0.6 -0.8 16 dB 12 VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT -24 0.7 0.8 0.9 1 1.1 1.2 FREQUENCY (GHz) 1.3 1.4 1.5 -1 0.7 0.8 0.9 1 1.1 1.2 FREQUENCY (GHz) 1.3 1.4 1.5 Noise Figure vs. Temperature [2] 12 10 NOISE FIGURE (dB) 8 6 4 2 0 0.7 +25 C +85 C -40 C Noise Figure vs. Attenuation State 12 10 NOISE FIGURE (dB) 8 6 4 2 0 0.7 0 dB 8 dB 16 dB 0.8 0.9 1 1.1 1.2 1.3 FREQUENCY (GHz) 1.4 1.5 0.8 0.9 1 1.1 1.2 1.3 FREQUENCY (GHz) 1.4 1.5 Output P1dB vs. Frequency [2] 30 Output P1dB vs. Attenuation State @ 900 MHz 30 25 25 P1dB (dBm) P1dB (dBm) 20 15 10 5 0 20 15 +25 C +85 C -40 C +25 C +85 C -40 C 10 0.7 0.8 0.9 1 1.1 1.2 FREQUENCY (GHz) 1.3 1.4 1.5 0 4 8 12 16 20 24 28 32 ATTENUATION STATE (dB) [1] See Evaluation PCB and Application Circuit for 900 MHz Tune. [2] Maximum gain state with digital attenuation set to minimum attenuation. 12 - 3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC926LP5E v00.0810 0.5 dB LSB 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 700 - 2700 MHz 900 MHz Tune [1] Output IP3 vs. Temperature [2][3] 50 45 40 IP3 (dBm) 35 30 25 20 0.7 IP3 (dBm) +25 C +85 C -40 C Output IP3 vs. Tone Power [2] 50 45 40 35 30 25 20 0.7 Pout = 0 dBm Pout = +5 dBm Pout = +10 dBm 0.8 0.9 1 1.1 1.2 FREQUENCY (GHz) 1.3 1.4 1.5 0.8 0.9 1 1.1 1.2 FREQUENCY (GHz) 1.3 1.4 1.5 12 VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT 12 - 4 Output IP3 vs. Attenuation State @ 900 MHz 50 45 40 IP3 (dBm) 35 30 25 20 15 Pout = 0 dBm Pout = -5 dBm 0 4 8 12 16 20 24 ATTENUATION STATE (dB) 28 32 [1] See Evaluation PCB and Application Circuit for 900 MHz Tune. [2] Maximum gain state with digital attenuation set to minimum attenuation. [3] Two-tone output power @ 0 dBm For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC926LP5E v00.0810 0.5 dB LSB 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 700 - 2700 MHz 1900 MHz Tune [1] Maximum Gain vs. Frequency [2] 44 NORMALIZED ATTENUATION (dB) 40 36 GAIN (dB) 32 28 24 Normalized Attenuation (Only Major States are Shown) 0 -4 -8 -12 -16 -20 -24 -28 -32 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 0 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB 31.5 dB +25 C +85 C -40 C 12 VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT 20 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 FREQUENCY (GHz) FREQUENCY (GHz) Input Return Loss (Only Major States are Shown) 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 1.7 0 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB 31.5 dB 0 dB Output Return Loss (Only Major States are Shown) 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 1.7 0 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB 31.5 dB 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 FREQUENCY (GHz) FREQUENCY (GHz) Bit Error vs. Frequency (Only Major States are Shown) 2 1.5 1 BIT ERROR (dB) 0.5 0 -0.5 -1 -1.5 -2 1.7 1.8 1.9 2 0 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB 31.5 dB 8 dB,16 dB 4 dB 31.5 dB Bit Error vs. Attenuation State 1.5 1.25 1 BIT ERROR (dB) 0.75 0.5 2.3 GHz 2.4 GHz 1.8 GHz 1.9 GHz 2.0 GHz 2.1 GHz 2.2 GHz 2.3 GHz 2.4 GHz 1.8 GHz - 2.2 GHz 0.25 0 -0.25 2.4 2.5 -0.5 0 4 8 12 2.1 2.2 2.3 16 20 24 28 32 FREQUENCY (GHz) ATTENUATION STATE (dB) [1] See Evaluation PCB and Application Circuit for 1900 MHz Tune. [2] Maximum gain state with digital attenuation set to minimum attenuation. 12 - 5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC926LP5E v00.0810 0.5 dB LSB 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 700 - 2700 MHz 1900 MHz Tune [1] Relative Phase vs. Frequency (Only Major States are Shown) 24 16 8 0 -8 -16 -24 1.7 31.5 dB Step Error vs. Frequency (Only Major States are Shown) 1 0.8 0.6 STEP ERROR (dB) 8 dB RELATIVE PHASE (deg) 16 dB 0.4 0.2 0 -0.2 -0.4 -0.6 -0.8 0 dB 0.5 dB 1 dB 2 dB 2 dB, 4 dB 16 dB 4 dB 8 dB 16 dB 31.5 dB 0 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB 31.5 dB 1.8 1.9 2 2.1 2.2 FREQUENCY (GHz) 2.3 2.4 2.5 -1 1.7 1.8 1.9 2 2.1 2.2 FREQUENCY (GHz) 2.3 2.4 2.5 12 VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT 12 - 6 Noise Figure vs. Temperature [2] 12 10 NOISE FIGURE (dB) 8 6 4 2 0 1.7 +25 C +85 C -40 C Noise Figure vs. Attenuation State 12 10 NOISE FIGURE (dB) 8 6 4 2 0 1.7 0 dB 8 dB 16 dB 1.8 1.9 2 2.1 2.2 2.3 FREQUENCY (GHz) 2.4 2.5 1.8 1.9 2 2.1 2.2 2.3 FREQUENCY (GHz) 2.4 2.5 Output P1dB vs. Frequency [2] 30 Output P1dB vs. Attenuation State @ 1900 MHz 30 25 25 P1dB (dBm) P1dB (dBm) 20 15 10 5 0 20 15 +25 C +85 C -40 C +25 C +85 C -40 C 10 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 0 4 8 FREQUENCY (GHz) 12 16 20 24 ATTENUATION STATE (dB) 28 32 [1] See Evaluation PCB and Application Circuit for 1900 MHz Tune. [2] Maximum gain state with digital attenuation set to minimum attenuation. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC926LP5E v00.0810 0.5 dB LSB 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 700 - 2700 MHz 1900 MHz Tune [1] Output IP3 vs. Temperature [2][3] 50 45 40 IP3 (dBm) 35 30 25 +25 C +85 C -40 C Output IP3 vs. Tone Power [2] 50 45 40 IP3 (dBm) 35 30 25 20 1.7 Pout = 0 dBm Pout = +5 dBm Pout = +10 dBm 12 VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT 20 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 FREQUENCY (GHz) FREQUENCY (GHz) Output IP3 vs. Attenuation State @ 1900 MHz 45 40 35 IP3 (dBm) 30 25 20 15 10 5 0 4 8 12 16 20 24 28 32 Pout = 0 dBm Pout = -5 dBm ATTENUATION STATE (dB) [1] See Evaluation PCB and Application Circuit for 1900 MHz Tune. [2] Maximum gain state with digital attenuation set to minimum attenuation. [3] Two-tone output power @ 0 dBm 12 - 7 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC926LP5E v00.0810 0.5 dB LSB 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 700 - 2700 MHz 2600 MHz Tune [1] Maximum Gain vs. Frequency [2] 44 NORMALIZED ATTENUATION (dB) 40 36 GAIN (dB) 32 28 24 20 2.1 Normalized Attenuation (Only Major States are Shown) 0 -4 -8 -12 -16 -20 -24 -28 -32 2.1 2.2 2.3 2.4 2.5 2.6 FREQUENCY (GHz) 2.7 2.8 0 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB 31.5 dB +25 C +85 C -40 C 2.2 2.3 2.4 2.5 2.6 FREQUENCY (GHz) 2.7 2.8 12 VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT 12 - 8 Input Return Loss (Only Major States are Shown) 0 -5 RETURN LOSS (dB) -10 8 dB - 31.5 dB 0 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB 31.5 dB Output Return Loss (Only Major States are Shown) 0 -5 RETURN LOSS (dB) 0 dB 0 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB 31.5 dB -10 -15 -20 -25 -30 2.1 -15 -20 -25 -30 2.1 2.2 2.3 2.4 2.5 2.6 FREQUENCY (GHz) 2.7 2.8 2.2 2.3 2.4 2.5 2.6 FREQUENCY (GHz) 2.7 2.8 Bit Error vs. Frequency (Only Major States are Shown) 2 1.5 1 BIT ERROR (dB) 0.5 0 -0.5 -1 -1.5 -2 2.1 2.2 2.3 0 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB 31.5 dB 8 dB,16 dB 4 dB 31.5 dB Bit Error vs. Attenuation State 1.5 1.25 1 BIT ERROR (dB) 0.75 0.5 2.7 GHz 2.3 GHz - 2.6 GHz 0.25 0 2.3 GHz 2.4 GHz 2.5 GHz 2.6 GHz 2.7 GHz -0.25 2.7 2.8 -0.5 0 4 8 2.4 2.5 2.6 FREQUENCY (GHz) 12 16 20 24 ATTENUATION STATE (dB) 28 32 [1] See Evaluation PCB and Application Circuit for 2600 MHz Tune. [2] Maximum gain state with digital attenuation set to minimum attenuation. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC926LP5E v00.0810 0.5 dB LSB 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 700 - 2700 MHz 2600 MHz Tune [1] Relative Phase vs. Frequency (Only Major States are Shown) 24 16 8 0 -8 -16 31.5 dB Step Error vs. Frequency (Only Major States are Shown) 1 0.8 0.6 STEP ERROR (dB) 8 dB RELATIVE PHASE (deg) 16 dB 0.4 0.2 0 -0.2 -0.4 -0.6 -0.8 4 dB 2 dB 0 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB 31.5 dB 0 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB 31.5 dB 16 dB 12 VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT -24 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 -1 2.1 2.2 2.3 FREQUENCY (GHz) 2.4 2.5 2.6 FREQUENCY (GHz) 2.7 2.8 Noise Figure vs. Temperature [2] 12 10 NOISE FIGURE (dB) 8 6 4 2 0 2.1 +25 C +85 C -40 C Noise Figure vs. Attenuation State 12 10 NOISE FIGURE (dB) 8 6 4 2 0 2.1 0 dB 8 dB 16 dB 2.2 2.3 2.4 2.5 2.6 FREQUENCY (GHz) 2.7 2.8 2.2 2.3 2.4 2.5 2.6 FREQUENCY (GHz) 2.7 2.8 Output P1dB vs. Frequency [2] 30 Output P1dB vs. Attenuation State @ 2600 MHz 30 25 25 P1dB (dBm) P1dB (dBm) +25 C +85 C -40 C 20 15 10 5 0 -5 +25 C +85 C -40 C 20 15 10 2.1 2.2 2.3 2.4 2.5 2.6 FREQUENCY (GHz) 2.7 2.8 0 4 8 12 16 20 24 ATTENUATION STATE (dB) 28 32 [1] See Evaluation PCB and Application Circuit for 2600 MHz Tune. [2] Maximum gain state with digital attenuation set to minimum attenuation. 12 - 9 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC926LP5E v00.0810 0.5 dB LSB 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 700 - 2700 MHz 2600 MHz Tune [1] Output IP3 vs. Temperature [2][3] 50 45 40 IP3 (dBm) 35 30 25 20 2.1 IP3 (dBm) +25 C +85 C -40 C Output IP3 vs. Tone Power [2] 50 45 40 35 30 25 20 2.1 Pout = 0 dBm Pout = +5 dBm Pout = +10 dBm 2.2 2.3 2.4 2.5 2.6 FREQUENCY (GHz) 2.7 2.8 2.2 2.3 2.4 2.5 2.6 FREQUENCY (GHz) 2.7 2.8 12 VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT 12 - 10 Output IP3 vs. Attenuation State @ 2600 MHz 50 45 40 35 IP3 (dBm) 30 25 20 15 10 5 0 4 8 12 16 20 24 ATTENUATION STATE (dB) 28 32 Pout = 0 dBm Pout = -5 dBm [1] See Evaluation PCB and Application Circuit for 2600 MHz Tune. [2] Maximum gain state with digital attenuation set to minimum attenuation. [3] Two-tone output power @ 0 dBm For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC926LP5E v00.0810 0.5 dB LSB 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 700 - 2700 MHz Serial Control Interface The HMC926LP5E contains a 3-wire SPI compatible digital interface (SERIN, CLK, LE). It is activated when P/S is kept high. The 6-bit serial word must be loaded MSB first. The positive-edge sensitive CLK and LE requires clean transitions. Standard logic families work well. If mechanical switches were used, sufficient debouncing should be provided. When LE is high, 6-bit data in the serial input register is transferred to the attenuator. When LE is high CLK is masked to prevent data transition during output loading. 12 VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT Parameter Min. serial period, tSCK Control set-up time, tCS Control hold-time, tCH LE setup-time, tLN Min. LE pulse width, tLEW Min LE pulse spacing, tLES Serial clock hold-time from LE, tCKN Typ. 100 ns 20 ns 20 ns 10 ns 10 ns 630 ns 10 ns 12 - 11 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC926LP5E v00.0810 0.5 dB LSB 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 700 - 2700 MHz Power-Up States If LE is set to logic LOW at power-up, the logic state of PUP1 and PUP2 determines the power-up state of the part per PUP truth table. The DVGA latches in the desired power-up state approximately 200 ms after power-up. PUP Truth Table LE 0 0 0 0 PUP1 0 1 0 1 PUP2 0 0 1 1 Gain Relative to Maximum Gain -31.5 dB -24 dB -16 dB Insertion Loss Power-On Sequence The ideal power-up sequence is: GND, Vs, digital inputs, RF inputs. The relative order of the digital inputs are not important as long as they are powered after Vs / GND Control Voltage Table State Low High Vdd = +5V 0 to 0.8V @