HMC942LP4E

HMC942LP4E v02.1210 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 25 - 31 GHz OUTPUT Features High Output power: +21 dBm low input power Drive: 0 to +6 dBm Fo isolation: >45 dBc single supply: +4.5V @ 214 mA 24 lead 4x4 mm sMt package: 16 mm² Typical Applications the HMC942lp4e is ideal for: • Clock Generation Applications: sONet OC-192 & sDH stM-64 • point-to-point & VsAt radios 5 Freq. Multipliers - ACtiVe - sMt • test instrumentation • Military & space • sensors Functional Diagram General Description the HMC942lp4e is a x2 active broadband frequency multiplier utilizing GaAs pHeMt technology in a leadless roHs compliant sMt package. When driven by a +4 dBm signal, the multiplier provides +17 dBm typical output power from 13 to 24.6 GHz. the Fo and 3Fo isolations are >20 dBc at 19 GHz. the HMC942lp4e is ideal for use in lO multiplier chains for pt-to-pt & VsAt radios yielding reduced parts count vs. traditional approaches. Electrical Specifications, TA = +25° C, Vdd = +4.5V, +4 dBm Drive Level parameter Frequency range, input Frequency range, Output Output power Fo isolation (with respect to output level) input return loss Output return loss supply Current (idd1 & idd2) 4 6 17 Min. typ. 12.5 - 15.0 25 - 30 21 55 12 12 214 240 4 5 14 Max. Min. typ. 15.0 - 15.5 30 - 31 18 55 9 10 214 240 Max. units GHz GHz dBm dBc dB dB mA 5-1 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC942LP4E v02.1210 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 25 - 31 GHz OUTPUT Output Power vs. Temperature @ +4 dBm Drive Level 25 Output Power vs. Drive Level 25 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 20 15 15 5 0 dBm 1 dBm 2 dBm 3 dBm 4 dBm 5 dBm 6 dBm 10 +25C +85C -40C -5 5 -15 5 30 31 32 0 24 25 26 27 28 29 30 31 32 -25 24 25 26 27 28 29 OUTPUT FREQUENCY (GHz) OUTPUT FREQUENCY (GHz) Output Power vs. Supply Voltage @ +4 dBm Drive Level 25 Isolation @ +4 dBm Drive Level 30 20 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 20 10 0 -10 -20 -30 -40 Fo 2Fo 15 10 4.0V 4.5V 5.0V 5 0 24 25 26 27 28 29 30 31 32 -50 24 25 26 27 28 29 30 31 32 OUTPUT FREQUENCY (GHz) OUTPUT FREQUENCY (GHz) Output Power vs. Input Power 30 OUTPUT POWER (dBm) 20 10 25 GHz 26 GHz 28 GHz 30 GHz 31 GHz 0 -10 -20 0 1 2 3 4 5 6 7 8 9 10 INPUT POWER (dBm) F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 5-2 Freq. Multipliers - ACtiVe - sMt HMC942LP4E v02.1210 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 25 - 31 GHz OUTPUT Input Return Loss vs. Temperature 0 -5 Output Return Loss vs. Temperature 0 +25C +85C -40C -5 RETURN LOSS (dB) -10 RETURN LOSS (dB) 16 -10 5 Freq. Multipliers - ACtiVe - sMt -15 +25C +85C -40C -15 -20 -25 -20 -30 12 13 14 15 -25 24 25 26 27 28 29 30 31 32 FREQUENCY (GHz) FREQUENCY (GHz) 5-3 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC942LP4E v02.1210 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 25 - 31 GHz OUTPUT Absolute Maximum Ratings rF input (Vdd = +5V) supply Voltage (Vdd1, Vdd2) Channel temperature Continuous pdiss (t= 85 °C) (derate 16.4 mW/°C above 85 °C) thermal resistance (channel to ground paddle) storage temperature Operating temperature esD sensitivity (HBM) +10 dBm +5.5 Vdc 175 °C 1.48 W 60 °C/W -65 to +150 °C -40 to +85 °C Class 1B Typical Supply Current vs. Vdd Vdd (Vdc) 4.0 4.5 5.0 idd (mA) 211 214 217 Note: Multiplier will operate over full voltage range shown above. 5 Freq. Multipliers - ACtiVe - sMt 5-4 eleCtrOstAtiC seNsitiVe DeViCe OBserVe HANDliNG preCAutiONs Outline Drawing NOtes: 1. leADFrAMe MAteriAl: COpper AllOY 2. DiMeNsiONs Are iN iNCHes [MilliMeters] 3. DiMeNsiON DOes NOt iNCluDe MOlDFlAsH OF 0.15mm per siDe. 4. DiMeNsiON DOes NOt iNCluDe MOlDFlAsH OF 0.25mm per siDe. 5. All GrOuND leADs AND GrOuND pADDle Must Be sOlDereD tO pCB rF GrOuND. Package Information part Number HMC942lp4e package Body Material roHs-compliant low stress injection Molded plastic lead Finish 100% matte sn Msl rating Msl1 [2] package Marking [1] H942 XXXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 °C F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC942LP4E v02.1210 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 25 - 31 GHz OUTPUT Pin Description pin Number 1, 3, 5, 6, 7, 12, 13, 14, 16, 18, 19, 24 Function GND Description package bottom must also be connected to rF/DC ground. interface schematic 5 Freq. Multipliers - ACtiVe - sMt 4 rFiN this pin is DC coupled and matched to 50 Ohms. 2, 8, 9, 10, 11, 17, 20, 21, 23 N/C these pins are not connected internally; however, all data shown herein was measured with these pins connected to rF/ DC ground. 15 rFOut this pin is AC coupled and matched to 50 Ohms. 22 Vdd supply voltage 4.5V ± 0.5V. external bypass capacitors of 100 pF, 1,000 pF and 2.2 µF are recommended. Application Circuit Component C1 C2 C3 Value 100 pF 1,000 pF 4.7 µF 5-5 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC942LP4E v02.1210 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 25 - 31 GHz OUTPUT Evaluation PCB 5 Freq. Multipliers - ACtiVe - sMt 5-6 List of Materials for Evaluation PCB 130602 [1] item J1 - J2 J5 C1 C2 C3 u1 pCB [2] Description pCB Mount sri K Connector DC pin 100 pF Capacitor, 0402 pkg. 1,000 pF Capacitor, 0603 pkg. 4.7 µF tantalum Capacitor HMC942lp4e x2 Active Multiplier 130949 eval Board [1] reference this number when ordering complete evaluation pCB [2] Circuit Board Material: rogers 4350 or Arlon 25Fr the circuit board used in the application should be generated with proper rF circuit design techniques. signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from Hittite upon request. F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com