HMC973LP3E

HMC973LP3E v00.0910 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 0.5 - 6.0 GHz Features excellent Linearity: +35 dBm Input IP3 Wide Attenuation range: 26 dB single Positive Voltage Control: 0 to +5V Absorptive topology 16 Lead 3x3mm sMt Package: 9mm² 8 AttenuAtors - AnALoG - sMt Typical Applications the HMC973LP3e is ideal for: • Point-to-Point radio • Cellular/3G & WiMAX/4G Infrastructure • test Instrumentation • Microwave sensors • Military, eCM & radar Functional Diagram General Description the HMC973LP3e is an absorptive Voltage Variable Attenuator (VVA) which operates from 0.5 to 6 GHz and is ideal in designs where an analog DC control signal must be used to control rF signal levels over a 26 dB amplitude range. It features a shunt-type attenuator controlled by an analog voltage, Vctrl. unlike other GaAs Fet based VVA’s the HMC973LP3e exhibits excellent linearity of +35 dBm input IP3, throughout it’s control range. the HMC973LP3e is an unidirectional device with optimum linearity performance achieved when the rF input signal is applied to the rFIn package lead. the HMC973LP3e is housed in a roHs compliant 3x3 mm QFn leadless package. Electrical Specifications, TA = +25° C, 50 Ohm system, Vdd = +5V Parameter Insertion Loss Attenuation range Input return Loss output return Loss Input Power for 1 dB Compression (any attenuation) Input third order Intercept (two-tone Input Power = +5 dBm each tone) supply Current (Idd) Frequency 0.5 - 4.0 GHz 4.0 - 6.0 GHz 0.5 - 3.0 GHz 3.0 - 6.0 GHz 0.5 - 6.0 GHz 0.5 - 6.0 GHz 0.5 - 6.0 GHz 0.5 - 6.0 GHz 0.5 - 6.0 GHz Min. typ. 3.5 5.5 26 28 12 10 30 35 200 300 Max. 5 8 units dB dB dB dB dB dBm dBm µA 8-1 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC973LP3E v00.0910 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 0.5 - 6.0 GHz Insertion Loss vs. Frequency Over Temperature 0 Attenuation vs. Frequency Over Vctrl 0 8 AttenuAtors - AnALoG - sMt 8-2 INSERTION LOSS (dB) -10 -5 ATTENUATION (dB) -20 -10 +25 C +85 C -40 C -30 0.0 V 1.0 V 1.6 V 2.0 V 2.6 V 3.4 V -40 -15 0 1 2 3 4 5 6 7 FREQUENCY (GHz) -50 0 2 4 FREQUENCY (GHz) 6 8 Attenuation vs. Vctrl Over Temperature @ 0.5 GHz 0 -5 ATTENUATION (dB) Attenuation vs. Vctrl Over Temperature @ 2 GHz 0 -5 ATTENUATION (dB) -10 -15 -20 -25 -30 -35 +25 C +85 C -40 C -10 -15 -20 -25 -30 -35 0 1 2 Vctrl (V) 3 4 5 +25 C +85 C -40 C 0 1 2 Vctrl (V) 3 4 5 Attenuation vs. Vctrl Over Temperature @ 4 GHz 0 -5 ATTENUATION (dB) Attenuation vs. Vctrl Over Temperature @ 6 GHz 0 -5 ATTENUATION (dB) -10 -15 -20 -25 -30 -35 -40 +25 C +85 C -40 C -10 -15 -20 -25 -30 -35 0 1 2 Vctrl (V) 3 4 5 +25 C +85 C -40 C 0 1 2 Vctrl (V) 3 4 5 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC973LP3E v00.0910 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 0.5 - 6.0 GHz Input Return Loss Over Vctrl 0 8 AttenuAtors - AnALoG - sMt Input Return Loss Over Temperature (Vctrl = 0) 0 +25 C +85 C -40 C RETURN LOSS (dB) -10 RETURN LOSS (dB) -10 -20 -20 -30 0.0 V 1.0 V 2.0 V 3.0 V -30 0 2 4 FREQUENCY (GHz) 6 8 -40 0 2 4 FREQUENCY (GHz) 6 8 Output Return Loss Over Temperature (Vctrl = 0) 0 +25 C +85 C -40 C Output Return Loss Over Vctrl 0 RETURN LOSS (dB) -10 RETURN LOSS (dB) -10 -20 -20 -30 0.0 V 1.0 V 2.0 V 3.0 V -30 0 2 4 FREQUENCY (GHz) 6 8 -40 0 2 4 FREQUENCY (GHz) 6 8 Input IP3 Over Vctrl 60 Input IP3 Over Temperature (Vctrl = 0V) 60 50 50 IP3 (dBm) 30 0.0 V 1.0 V 1.6 V 2.0 V 2.6 V 3.4 V IP3 (dBm) 40 40 30 +25 C +85 C -40 C 20 20 10 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 10 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 FREQUENCY (GHz) FREQUENCY (GHz) 8-3 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC973LP3E v00.0910 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 0.5 - 6.0 GHz Voltages & Currents Vdd Vctrl 5V @ 200 µA 0 to +5V @ 100 µA Absolute Maximum Ratings rF Input Power Vdd Control Voltage range Channel temperature Continuous Pdiss (t = 85 °C) thermal resistance (Channel to ground paddle) storage temperature operating temperature esD sensitivity (HBM) +29 dBm 5.5V -0.5 to 5.5V 150 °C 0.8W 80 °C/W -65 to +150 °C -40 to +85 °C Class 1A 8 AttenuAtors - AnALoG - sMt 8-4 eLeCtrostAtIC sensItIVe DeVICe oBserVe HAnDLInG PreCAutIons Outline Drawing notes: 1. PACKAGe BoDY MAterIAL: LoW stress InJeCtIon MoLDeD PLAstIC sILICA AnD sILICon IMPreGnAteD. 2. LeAD AnD GrounD PADDLe MAterIAL: CoPPer ALLoY. 3. LeAD AnD GrounD PADDLe PLAtInG: 100% MAtte tIn. 4. DIMensIons Are In InCHes [MILLIMeters]. 5. LeAD sPACInG toLerAnCe Is non-CuMuLAtIVe. 6. PAD Burr LenGtH sHALL Be 0.15mm MAX. PAD Burr HeIGHt sHALL Be 0.05mm MAX. 7. PACKAGe WArP sHALL not eXCeeD 0.05mm 8. ALL GrounD LeADs AnD GrounD PADDLe Must Be soLDereD to PCB rF GrounD. 9. reFer to HIttIte APPLICAtIon note For suGGesteD PCB LAnD PAttern. Package Information Part number HMC973LP3e Package Body Material Lead Finish 100% matte sn MsL rating MsL1 [2] Package Marking [1] H973 XXXX roHs-compliant Low stress Injection Molded Plastic [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 °C F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC973LP3E v00.0910 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 0.5 - 6.0 GHz 8 AttenuAtors - AnALoG - sMt Pin Descriptions Pin number 1, 2, 4, 9, 11, 12 Ground Paddle Function GnD Description these pins and the exposed ground paddle must be connected to rF/DC ground. Interface schematic 3 rFout this pin is DC coupled and matched to 50 ohms. A blocking capacitor is required if rF line potential is not equal to 0V. 5 Vdd supply Voltage the pins are not connected internally; however, all data shown herein was measured with these pins connected to rF/DC ground externally. 6, 8, 13 - 16 n/C 7 Vctrl Control Voltage 10 rFIn this pin is DC coupled and matched to 50 ohms. A blocking capacitor is required if rF line potential is not equal to 0V. the HMC973LP3e is a unidirectional device with optimum linearity performance achieved with rF input signal applied to rFIn package lead. Application Circuit 8-5 F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC973LP3E v00.0910 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 0.5 - 6.0 GHz Evaluation PCB 8 AttenuAtors - AnALoG - sMt List of Materials for Evaluation PCB 131552 [1] Item J1, J2 J3 - J5 C1, C2 C3, C4 u1 PCB [2] Description PCB Mount sMA rF Connector DC Pin 100 pF Capacitor, 0402 Pkg. 10000 pF Capacitor, 0402 Pkg. HMC973LP3e Voltage Variable Attenuator 131550 evaluation PCB [1] reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25Fr or rogers 4350 the circuit board used in the application should use rF circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from Hittite upon request. F or price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8-6