TMCP0G336

TANTALUM ELECTROLYTIC CAPACITORS TMCP Series (0805 Size Tantalum Chip Capacitors) Product specifications Operating temperature range Rated voltage Surge voltage Derated voltage Capacitance Capacitance tolerance TMCP –55°C ~ +125°C DC2.5 ~ 25V DC3.2 ~ 32V DC1.6 ~ 16V 0.1 ~ 47µF ±10% or 20% Test conditions JIS C5101-1:1998 Features • Rendered even smaller-sized thanks to the accumulated technological knowhow (reduced to about 1/3 the cubic volume of the TMCS type). • Suitable for high-density packaging essential to Audio Visual and other equipment downsizing. 85°C 85°C 125°C Product symbol : (Example) TMC Series P case 6.3V 10µF ±20% TMC P 0J 106 M T R F Paragraph 4.7, 120 Hz Paragraph 4.9, in 5 minutes Type of series Terminal code Packing polarity code Packing method code (T:carrier tape) Capacitance tolerance code (M:±20%) Capacitance code Rated voltage code Case size code Leakage current Refer to table standard product table after the rated voltage is applied. tanδ Refer to table standard product table Paragraph 4.8, 120Hz Outline of drawings and dimensions Anode indication belf mark L C/C ±20% or less Surge withstanding tanδ Specified initial value or less voltage LC Specified initial value or less Paragraph 4.26 W W Specified initial value C/C – 0.06 –55 -20 ~ 0% 0.10 0.12 0.14 0.16 0.24 0.60 — 85 125 H P case product (0805) 0 ~ +20% 0 ~ +20% 0.08 0.10 0.12 0.14 0.22 0.30 0.10 0.12 0.14 0.16 0.24 0.40 tanδ Value shown table 0.08 Temperature characteristics or less 0.10 0.12 0.20 Paragraph 4.24 a 0.30 LC Refer to standard product table 1000% or less 1250% or less specified intial specified intial value or less value or less Dimensions Case code P L±0.2 2.0 (Unit : mm) C/C ±20% or less Solder heat resistance tanδ LC Specified initial value or less Specified initial value or less C/C ±20% or less Solder Dip 260±5℃ 10±1 sec. Reflow 260℃ 10±1 sec. Case size W±0.2 HMAX R±0.2 1.25 1.2 0.5 a±0.1 0.9 Moisture resistance no load Paragraph 4.22, 40°C 90 ~ 95%RH,500hours Standard value and case size Capacitance µF 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 Code 104 154 224 334 474 684 105 155 225 335 475 685 106 156 226 336 476 2.5 0E 4 0G Rated voltage (V.DC) 6.3 10 16 0J 1A 1C 20 1D P P P P P P P P P 25 1E P tanδ LC 150%Specified initial value or less Specified initial value or less C/C ±20% or less High-temperature load tanδ LC Specified initial value or less 200% Specified initial value or less C/C ±20% or less Thermal shock tanδ LC Specified initial value or less Specified initial value or less Paragraph 4.23, 85°C The rated voltage is applied for 2000 hours. Leave at -55°C, normal temperature, 125°C, and normal temperature for 30 min., 3 min., 30 min., and 3 min. Repeat this operation 5 times running. 40°C, humidity 90 to 95%RH The rated voltage is applied for 500 hours. 85°C. The rated voltage is applied (through a protective resistor of 1 Ω/V). P P P P P P P P P P P P P P P P P P P P P P P P P P C/C ±20% or less Moisture resistance tanδ 150% Specified initial value or less load LC 200% Specified initial value or less Failure rate 1% / 1000hours ※This catalog is designed for providing general information. Please inquire of our Sales Department to confirm specifications prior to use. For ratings not covered the table, consult Hitachi AIC. 141 Hitachi AIC Inc. TANTALUM ELECTROLYTIC CAPACITORS Standard product tables - TMCP series Standard product table - TMCP series Rated voltage Capacitance V. DC µF 2.5 15 22 33 47 4 15 22 33 47 6.3 4.7 6.8 10 15 22 10 1.5 2.2 3.3 4.7 6.8 10 16 1.0 1.5 2.2 3.3 4.7 20 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 25 0.1 0.47 1.0 tanδ 0.08 0.10 0.20 0.30 0.08 0.10 0.30 0.30 0.08 0.08 0.08 0.12 0.30 0.08 0.08 0.08 0.08 0.20 0.20 0.06 0.08 0.08 0.08 0.08 0.06 0.06 0.06 0.06 0.06 0.06 0.08 0.08 0.08 0.06 0.06 0.06 Leakage current µA 0.5 0.6 0.8 11.8 0.6 0.9 13.2 18.8 0.5 0.5 0.7 1.9 13.9 0.5 0.5 0.5 0.5 6.8 10.0 0.5 0.5 0.5 0.6 0.8 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Case code P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P Product name TMCP0E156 TMCP0E226 TMCP0E336 TMCP0E476 TMCP0G156 TMCP0G226 TMCP0G336 TMCP0G476 TMCP0J475 TMCP0J685 TMCP0J106 TMCP0J156 TMCP0J226 TMCP1A155 TMCP1A225 TMCP1A335 TMCP1A475 TMCP1A685 TMCP1A106 TMCP1C105 TMCP1C155 TMCP1C225 TMCP1C335 TMCP1C475 TMCP1D104 TMCP1D154 TMCP1D224 TMCP1D334 TMCP1D474 TMCP1D684 TMCP1D105 TMCP1D155 TMCP1D225 TMCP1E104 TMCP1E474 TMCP1E105 ① ② ①Anode indication belt mark ②Simplified code of nominal capacitance  (A6 : 1µF) Marking indication (Example 1) 6.3V1µF A6 ① ②③ (Example 2) 10V1µF AA ①Anode indication belt mark ②Simplified code of rated voltage (A : 10V) ③Simplified code of nominal capacitance   (A : 1µF) ∗When the capacitance code is the same, use the voltage code for the higher rated voltage. ∗When indicating both rated voltage and nominal capacitance by code, omit the multiplier of the capacitance code. Hitachi AIC Inc. 142