TMFLP0E107

TANTALUM ELECTROLYTIC CAPACITORS TMF Series Chip Tantalum Capacitor With face down Terminals Product specifications Operating temperature range Rated voltage Surge voltage Derated voltage Capacitance Capacitance tolerance TMF −55℃∼＋125℃ DC2.5∼16V DC3.2∼20V DC1.6∼10V 2.2∼220μF ±20％ Test conditions JIS C5101-1:1998 Features • A new, originally designed structure with reduced space requirement, resulting in the small size and large capacitance of units. • Best suited for multi-media applications, such as cell phones, digital video cameras, etc. • Environmentally friendly terminal plating -- lead-free (100% Sn) solder plating. 85℃ 85℃ 125℃ Produt code : (Example) TMF Series LM case 6.3V 22µF ± 20% Paragraph 4.7, 120 Hz Paragraph 4.9, in 5 minutes TMF LM 0J 226 M T R F Type of series Case size code Tinned plated terminals (Sn 100) Packing polarity code Packing method code (T: carrier tape) Capacitance tolerance code (M : ± 20%) Capacitance code Rated voltage code Leakage current Refer to standard product table after the rated voltage is applied. Outline of drawings and dimensions Anode indication belt mark tanδ 0.3 or less Paragraph 4.8, 120Hz △C/C Surge withstanding tanδ voltage LC ±20％ or less Specified initial value or less Specified initial value or less −55 85 125 Paragraph 4.26 H Specified initial value L a W △C/C tanδ Value shown table − 0.3 −20∼＋20％ 0∼＋20％ 0∼＋20％ 0.6 0.3 0.4 Temperature characteristics or less Paragraph 4.24 Dimensions Case code LM LP LA L±0.1 1.6 2.0 3.2 Case size W±0.1 H±0.1 0.85 0.8 1.25 0.9 1.60 0.9 (Unit : mm) LC Refer to standard product table − 1000% or less 1250% or less specified initial specified initial value or less value or less R±0.1 0.5 0.5 0.8 a±0.1 0.65 0.90 1.20 △C/C Solder heat resistance tanδ LC ±20％ or less Specified initial value or less Specified initial value or less ±20％ or less 150% Specified initial value or less Specified initial value or less ±20％ or less Specified initial value or less 200% Specified initial value or less ±20％ or less Specified initial value or less Specified initial value or less Solder Dip 260±5℃ 10±1 sec. Reflow 260℃ 10±1 sec. Standard value and case size Capacitance µF 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 Code 105 155 225 335 475 685 106 156 226 336 476 686 107 157 227 2.5 0E Rated voltage (V.DC) 4 6.3 10 0G 0J 1A △C/C 16 1C Moisture resistance no load tanδ LC △C/C High-temperature load tanδ LC △C/C Thermal shock tanδ LC Failure rate Paragraph 4.22, 40°C 90 ~ 95%RH,500hrs LM LM LP LP LA LA LM LM LP LP LA LA LM LM LP LP LA LA LM LM LP LP LA LA LM LM LP LP LA LA Paragraph 4.23, 85°C The rated voltage is applied for 2000 hours. Leave at -55°C, normal temperature, 125°C, and normal temperature for 30 min., 3 min., 30 min., and 3 min. Repeat this operation 5 times running. 85°C. The rated voltage is applied (through a protective resistor of 1 Ω/V). 1％／1000hrs ※This catalog is designed for providing general information. Please inquire of our Sales Department to confirm specifications prior to use. 133 Hitachi AIC Inc. TANTALUM ELECTROLYTIC CAPACITORS Standard product tables - TMF series Standard product tables - TMF series Rated voltage capacitance Ｖ.Ｄ Ｃ µF 2.5 33 47 68 100 150 220 4 22 33 47 68 100 150 6.3 15 22 33 47 68 100 10 6.8 10 15 22 33 47 16 2.2 3.3 4.7 6.8 10 15 tanδ 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 Leakage current case code µA 8.2 LM 11.7 LM 17.0 LP 25.0 LP 37.5 LA 55.0 LA 8.8 LM 13.2 LM 18.8 LP 27.2 LP 40.0 LA 60.0 LA 9.4 LM 13.8 LM 20.7 LP 29.6 LP 42.8 LA 63.0 LA 6.8 LM 10.0 LM 15.0 LP 22.0 LP 33.0 LA 47.0 LA 3.5 LM 5.2 LM 7.5 LP 10.8 LP 16.0 LA 24.0 LA Product name TMFLM0E336 TMFLM0E476 TMFLP0E686 TMFLP0E107 TMFLA0E157 TMFLA0E227 TMFLM0G226 TMFLM0G336 TMFLP0G476 TMFLP0G686 TMFLA0G107 TMFLA0G157 TMFLM0J156 TMFLM0J226 TMFLP0J336 TMFLP0J476 TMFLA0J686 TMFLA0J107 TMFLM1A685 TMFLM1A106 TMFLP1A156 TMFLP1A226 TMFLA1A336 TMFLA1A476 TMFLM1C225 TMFLM1C335 TMFLP1C475 TMFLP1C685 TMFLA1C106 TMFLA1C156 Marking indication TMF series LM・LP case + JA ① ②③ ①Anode indication belt mark ②Simplified code of rated   voltage (J:6.3V) ③Simplified code of nominal  capacitance (A:10µF) ①Anode indication belt mark ②Simplified code of rated   voltage (G:4V) ③Simplified code of nominal  capacitance (A8:100µF) ④Lot indication (A:for manufacturing in January, 2009) LA case + ① GA8A ② ③④ Lot indication Month Year 1 A N a n 2 B P b p 3 C Q c q 4 D R d r 5 E S e s 6 F T f t 7 G U g u 8 H V h v 9 J W j w 10 K X k x 11 L Y l y 12 M Z m z 2009 2010 2011 2012 Hitachi AIC Inc. 134