TNFLA0G686MTRF

TANTALUM ELECTROLYTIC CAPACITORS TNF Series (High Performance Polymer type Chip Tantalum Capacitor with Face-down Type TNF series) Product specifications TNF Test conditions JIS C5101-1:1998 Features • A high function and reliability are achieved by uniting the electroconductive polymer and the lower electrode structure. • This type reduces ESR be using high performance polymer based on our original manufacturing process. • This type is suitable for high-density implementation such as the multimedia connection. Operating temperature range –55°C ~ +105°C Rated voltage Surge voltage Derated voltage Capacitance Capacitance tolerance DC2.5 ~ 10V DC3V ~ 13V DC1.6 ~ 6.3V 10 ~ 100µF ±20% 85°C 85°C (105°C) 120Hz 120Hz Product code: (Example) TNF type LA case 10V 33 µF±20%, ESR 200mΩ TNF LA 1A 336 M T R X F Type of series Case size code Lead-free solder plating Specific product code Packing polarity code With or without taping Capacitance tolerance code(M : ± 20%) Capacitance code Rated voltage code Leakage current Refer to standard product table — Outline of drawings and dimensions tanδ 0.1 or less 120Hz N7Aa ESR H L W LM case 500mΩMAX LP case 200mΩ,500mΩMAX 100kHz LA case 200mΩ,500mΩMAX Charge a surge voltage through a protective resistor of 33 Ω for 30 seconds and discharge it for 5 minutes and 30 seconds at 85°C. Repeat this operation 1000 times. a l l C/C ±20% or less Surge withstanding tanδ Specified initial value or less voltage LC 300% or less Specified initial value or less Specified initial value C/C – 0.10 –55 105 -20∼0％ 0∼+30％ 0.14 – Dimensions Case code LM LP LA L±0.1 1.6 2.0 3.2 W±0.1 0.85 1.25 1.60 (Unit : mm) tanδ Value shown table Case size H±0.1 R±0.1 0.8 0.9 0.9 0.5 0.5 0.8 a±0.1 0.65 0.90 1.20 Temperature characteristics Measure the specified characteristics in each stage. or less LC Refer to standard product table — 1CV or 30µA or less C/C ±20% or less Standard value and case size Capacitance μF 10 15 22 33 47 68 100 Code 106 156 226 336 476 686 107 2.5 0E Rated voltage (V.DC) 4 6.3 0G 0J LM LP LP LP LA LA LA LA 10 1A LP Solder heat resistance tanδ LC Specified initial value or less 300% or less Specified initial value or less Reflow Board surface peak temperature: 250°C 5S 217°C or more: within 90 sec. C/C +30% ~ -20% or less Moisture resistance no load tanδ LC Specified initial value or less 300% or less Specified initial value or less C/C ±20% or less High-temperature load tanδ LC Specified initial value or less 300% or less Specified initial value or less C/C ±20% or less Thermal shock tanδ LC Failure rate Specified initial value or less 300% or less Specified initial value or less Leave at 40°C and 90 to 95%RH for 500 hours. 85°C. The rated voltage is applied through a protective resistor of 3Ω for 1000 hours. Leave at -55°C, normal temperature, 85°C, and normal temperature for 30 min., 15 min., 30 min., and 15 min. Repeat this operation 5 times running. 85°C. The rated voltage is applied (through a protective resistor of 1 Ω/V). 1% / 1000hrs 129 Hitachi AIC Inc. TANTALUM ELECTROLYTIC CAPACITORS Standard product tables - TNF series Standard product table - TNF series Rated voltage Capacitance Ｖ.Ｄ Ｃ μＦ 2.5 47 100 4 33 68 6.3 10 22 47 10 10 33 tanδ 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 Leakage current μA 11.8 11.8 25.0 25.0 13.2 13.2 27.2 27.2 10.0 13.9 13.9 29.6 29.6 10.0 10.0 33.0 33.0 Case code LP LP LA LA LP LP LA LA LM LP LP LA LA LP LP LA LA Product name TNFLP0E476MTRF TNFLP0E476MTRXF TNFLA0E107MTRF TNFLA0E107MTRXF TNFLP0G336MTRF TNFLP0G336MTRXF TNFLA0G686MTRF TNFLA0G686MTRXF TNFLM0J106MTRF TNFLP0J226MTRF TNFLP0J226MTRXF TNFLA0J476MTRF TNFLA0J476MTRXF TNFLP1A106MTRF TNFLP1A106MTRXF TNFLA1A336MTRF TNFLA1A336MTRXF ESR（100kHz） Maximum permissible ripple current mΩ （20℃ 100kHz） mArms 500 350 200 550 500 380 200 600 500 350 200 550 500 380 200 600 500 320 500 350 200 550 500 380 200 600 500 350 200 550 500 380 200 600 Marking indication TNF series LM・LP case Jｊ ①② ③ + ①Simplified code of nominal  capacitance (J:22µF) ②Simplified code of rated   voltage (j:6.3V) ③Anode indication belt mark ①Simplified code of nominal  capacitance (N7:33µF) ②Simplified code of rated   voltage (A:10V) ③Lot indication (A:for manufacturing in January, 2009) ④Anode indication belt mark LA case N7AA ① ②③ ④ + Hitachi AIC Inc. 130