060-6881-02

Instrumentation Accessories Test & Measurement Sensors DESCRIPTION Honeywell provides a wide range of accessories for our test and mating connectors, cable assemblies, replacement manuals, measurement sensor products, which are designed to meet ad- software, and upgrade kits. ditional requirements for most customer applications. If you don’t see exactly what you need listed below, or have Accessories available to complement Honeywell’s test and mea- special requirements for your particular application or operating surement instrumentation products include signature calibration environment, please contact Honeywell for assistance. models, summing boxes, covers, bench/panel/rack mounts, SIGNATURE CALIBRATION MODULE FEATURES MATING CONNECTOR FEATURES • • Signature in-line calibration modules for use with our instrumentation products Instant mating connector with a 9-pin male to 25-pin male adapter SUMMING BOX FEATURES CABLE ASSEMBLIES FEATURES • • For summing up to four transducers pin male/female cables for general connection use COVER FEATURES • Splash-proof lens for 1/8 DIN meters for use with our instrumentation products REPLACEMENT MANUAL FEATURES • Bench mount adaptors for 1/8 DIN Bench top handle adapter for 3/8 DIN PANEL MOUNT FEATURES • • Panel mount clips and adapter for 1/8 DIN Panel mount kits for 3/8 DIN metal cases RACK MOUNT FEATURES • Rack hardware, 19 inch for the Model SC2000 Replacement manuals and communication guides for the Model SC family of instruments BENCH MOUNT FEATURES • • Cables and connectors for the GM family and molded 25- SOFTWARE FEATURES • Utility software • Cable kit to allow PCs to change signature calibration data UPGRADE KIT FEATURES • Variety of upgrade kits for the GM and DM instrument family including limit kit upgrades, peak kit upgrades, and track and hold kit upgrades Instrumentation Accessories SIGNATURE CALIBRATION MODULES PANEL MOUNTS Order code Description Order code Description AA180 Signature calibration module - in line AA927 Panel mount clip AA928 Panel mount kit for 3/8 DIN metal case AA943 Panel mount adapter for 1/8 DIN (SC500) SUMMING BOX Order code Description AA912 Set of five mating connectors for AA911 summing junction box AA911 Four transducer (max.) summing junction box COVERS RACK MOUNT Order code Description AA934 Rack hardware, 19 in for Model SC2000 MATING CONNECTORS Order code Description Order code Description AA923 NEMA-4 splash proof cover lens for 1/8 DIN meter (GM/DM) AA176 Mating connector adapter, 9 pin male to 25 pin male CABLE ASSEMBLIES BENCH MOUNT Description Order code Description AA924 Bench mount adapter for 1/8 DIN AA154 Power cable and connector for GM family AA926 Bench top handle adapter for 3/8 DIN AA168 AA944 Mounting kit for SC500 (includes AA924 and AA943) Molded 25-pin male/female communications cable Order code 2 Honeywell • Sensing and Control Test & Measurement Sensors REPLACEMENT MANUALS UPGRADE KITS Order code Description Order code Description AA184 Model SC manual AA914 Limit kit upgrade for Model GM AA185 Model SC Communication guide AA917 Limit kit upgrade for Model DM AA913 Peak kit upgrade for Model GM AA916 Peak kit upgrade for Model DM AA915 Track and hold kit upgrade for Model GM AA918 Track and hold kit upgrade for Model DM SOFTWARE Order code Description AA181 Software and cable to allow PCs to change signal data AA183 Instrument utility software Honeywell • Sensing and Control 3 Instrumentation Accessories Test and Measurement Sensors Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. WARNING PERSONAL INJURY • DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. Find out more WARNING Honeywell serves its customers MISUSE OF DOCUMENTATION through a worldwide network of • The information presented in this datasheet is for reference only. DO NOT USE this document as product installation information. • Complete installation, operation and maintenance information is provided in the instructions supplied with each product. sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell’s Failure to comply with these instructions could result in death or serious injury. test and measurement products, call +1-614-850-5000, visit www.honeywell.com/sensotec, or e-mail inquiries to info.tm@honeywell.com Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 www.honeywell.com 008863-1-EN IL50 GLO Printed in USA.  September 2010 Copyright © 2010 Honeywell International Inc. All rights reserved.