S-Beam Tension and Compression Load Cells
Models 151 and 152
32314675
Issue 1
Datasheet
FEATURES
• Tension and compression load/force measurement
• Wide capacity range: 50 N to 50K N
• Accuracy: ±0.03 %FS
• Metric thread
• One-piece, nickel-plated alloy steel or aluminum construction
• Overload capacity: 150 %FS
• IP67 sealing
• Integrated cable: 1,5 m [4.92 ft]
POTENTIAL APPLICATIONS
DESCRIPTION
Honeywell Models 151/152 S-Beam Load Cells combine
compact structure with enhanced precision and rigorous testing
to form a reliable and durable tension and compression force
transducer. The one-piece design achieves an accuracy of ±0.03
% full scale. The lower capacity (50 N and 100 N) Models 152
(Order Code CA152) are constructed from aluminum; whereas
higher capacity load cells Models 151 (250 N to 50K N) are
made with alloy steel (Order Code CA151). (See page 3 for Order
Guide information.)
Models 151/152 load cells help keep equipment and specimens
safe, as well as minimize test time and maintenance through
reliable force measurement.
VALUE TO CUSTOMERS
• Wide capacity range: 50 N to 50K N
• Standard accuracy of ±0.03 %FS
• 5-points calibration in tension and compression
DIFFERENTIATION
• Tension and compression calibration
• 5-points calibration data
• Mechanical shock tested 50 g peak to IEC 60068-2-27
• Vibration tested to IEC 60068-2-6
Sensing and Productivity Solutions
• Medical
- Needle and syringe testing
• Industrial
- Universal test machine
- Material test machine
PORTFOLIO
Honeywell offers a wide portfolio of load cell platform designs
constructed of stainless steel, carbon steel, or aluminum.
These platforms include low profile/pancake, miniature and
subminiature, fatigue rated, canister, donut thru-hole style, rodend, beam style, and loadpin load cells.
S-Beam Tension and Compression Load Cell, Models 151 & 152
Table 1. Electrical Specifications
Characteristic
Parameter
Strain gage type
Bonded foil
Excitation voltage (acceptable)
5 V ~10 V
Insulation resistance
>5,000 MΩ @ 50 Vdc
Bridge resistance (input)
>385 Ω
Bridge resistance (output)
350 ±3 Ω
Zero balance
±1 %FS
Cable length
1,5 m [4.92 ft]
Table 2. Performance Specifications
Characteristic
Parameter
Rated capacity
50 N ~ 50K N
Non-linearity (typ.)
±0.03 %FS
Hysteresis (typ.)
±0.03 %FS
Non-repeatability
±0.03 %FS
Zero balance
±1 %FS
Output @ rated capacity (FS)
2.0 mV/V ±1.0 %
Operation
Tension and compression
Standard calibration
Tension (+) and compression (-)
Calibration report
5-points calibration data
Vibration
IEC 60068-2-6
Shock
IEC 60068-2-27
Safe overload
150 % of rated capacity
Table 3. Environmental Specifications
Characteristic
Parameter
Temperature, operating
-20 °C to 80 °C [-4 °F to 176 °F]
Temperature, compensated
-10 °C to 40 °C [14 °F to 104 °F]
Temperature effect, zero
±0.003 %FS/°C
Temperature effect, span
±0.003 %reading/°C
Protection level
IP67
Table 4. Mechanical Specifications
Characteristic
Parameter
Static overload capacity
150 % of rated capacity
Material (order code)
Alloy steel (CA151) or aluminum (CA152)
Table 5. Wiring Color/Codes
Color
2
Designation
Red
(+) Excitation
Black
(-) Excitation
Green
(+) Output
White
(-) Output
Brown
Shield drain
sensing.honeywell.com
S-Beam Tension and Compression Load Cell, Models 151 & 152
Figure 1. Product Nomenclature
For example, CA151NL,1BB,2U,6F,9A,30B defines a Model 151 S-Beam Load Cell, 250 N range, -10 °C to 40 °C [14 °F to 104 °F]
temperature compensation, unamplified, integral PVC cable, 10 point, tension and compression output.
NL
1BB
2U
6F
9A
30B
Range
Temperature
Compensation
Internal
Amplifiers
Electrical
Termination
Special
Calibration
Special Calibration
(Load Cells Only)
CA151
Receiver type
S-Beam Series
Load Cell
Model 151A
CA151
(order code)
Model 152B
CA152
(order code)
A made from
alloy steel.
For use ONLY
with ranges 250 N
and greater.
B made from
aluminum.
For use ONLY
with ranges 50 N
and 100 N.
MK
50 N
ML
100 N
NL
250 N
MY
500 N
MN
1000 N
MO
2000 N
MQ
5000 N
MR
10K N
MS
20K N
ZN
30K N
MT
50K N
-10 °C to 40 °C
1BB [14 °F to 104 °F]
temp. comp.
2U
Unamplified
6F
Integral cable,
PVC
1,5 m [4.92 ft]
9A
10 point,
(5 up/5 down)
20 % increments
30B
Tension and
compression
(+, -) output
Table 6. Order Guide
Range
Description
Order Code
Honeywell Part Number
50 N
Model 152 50 N
CA152MK,1BB,2U,6F,30B
060-P662-01
100 N
Model 152 100 N
CA152ML,1BB,2U,6F,30B
060-P662-02
250 N
Model 151 250 N
CA151NL,1BB,2U,6F,30B
060-P663-01
500 N
Model 151 500 N
CA151MY,1BB,2U,6F,30B
060-P663-02
1000 N
Model 151 1,000 N
CA151MN,1BB,2U,6F,30B
060-P664-01
2000 N
Model 151 2,000 N
CA151MO,1BB,2U,6F,30B
060-P665-01
5000 N
Model 151 5,000 N
CA151MQ,1BB,2U,6F,30B
060-P665-02
10K N
Model 151 10,000 N
CA151MR,1BB,2U,6F,30B
060-P665-03
20K N
Model 151 20,000 N
CA151MS,1BB,2U,6F,30B
060-P666-01
30K N
Model 151 30,000 N
CA151ZN,1BB,2U,6F,30B
060-P666-02
50K N
Model 151 50,000 N
CA151MT,1BB,2U,6F,30B
060-P666-03
Sensing and Productivity Solutions
3
S-Beam Tension and Compression Load Cell, Models 151 & 152
DIMENSIONAL DRAWINGS
Figure 2. Model 151 & 152 Dimensions
Wiring Codes
Color
Designation
Red
(+) Excitation
Black
(-) Excitation
Green
(+) Output
White
(-) Output
Brown
Shield Drain
Capacity
(N)
Model
Case
Material
A
(Reference)
B
(Reference)
C
T
L
M
W
50
152
aluminum
68 mm
[2.68 in]
24,5 mm
[0.96 in]
9 mm
[0.35 in]
18 mm
[0.71 in]
70 mm
[2.76 in]
M8 x 1.25/
thru
56 mm
[2.20 in]
100
152
aluminum
68 mm
[2.68 in]
24,5 mm
[0.96 in]
9 mm
[0.35 in]
18 mm
[0.71 in]
70 mm
[2.76 in]
M8 x 1.25/
thru
56 mm
[2.20 in]
250
151
alloy steel
62,5 mm
[2.46 in]
18,5 mm
[0.73 in]
6,35 mm
[0.25 in]
12,7 mm
[0.50 in]
63,5
[2.5 in]
M6 x 1/thru
50,8 mm
[2.0 in]
500
151
alloy steel
62,5 mm
[2.46 in]
18,5 mm
[0.73 in]
6,35 mm
[0.25 in]
12,7 mm
[0.50 in]
63,5
[2.5 in]
M6 x 1/thru
50,8 mm
[2.0 in]
1000
151
alloy steel
62,5 mm
[2.46 in]
25,4 mm
[1.0 in]
9,5 mm
[0.37 in]
19 mm
[0.75]
76,2 mm
[3.0 in]
M10 x 1.5/
thru
50,8 mm
[2.0 in]
2000
151
alloy steel
62,5 mm
[2.46 in]
25,4 mm
[1.0 in]
9,5 mm
[0.37 in]
19 mm
[0.75]
76,2 mm
[3.0 in]
M12 x 1.75/
thru
50,8 mm
[2.0 in]
5000
151
alloy steel
62,5 mm
[2.46 in]
25,4 mm
[1.0 in]
9,5 mm
[0.37 in]
19 mm
[0.75]
76,2 mm
[3.0 in]
M12 x 1.75/
thru
50,8 mm
[2.0 in]
10k
151
alloy steel
62,5 mm
[2.46 in]
31,5 mm
[1.24 in]
12,7 mm
[0.50 in]
25,4 mm
[1.0 in]
76,2 mm
[3.0 in]
M12 x 1.75/
thru
50,8 mm
[2.0 in]
20k
151
alloy steel
86 mm
[3.39 in]
31,5 mm
[1.24 in]
19 mm
[0.74 in]
25,4 mm
[1.0 in]
108 mm
[4.25 in]
M18 x 1.5/
thru
76,2 mm
[3.0 in]
30k
151
alloy steel
86 mm
[3.39 in]
31,5 mm
[1.24 in]
19 mm
[0.74 in]
25,4 mm
[1.0 in]
108 mm
[4.25 in]
M18 x 1.5/
thru
76,2 mm
[3.0 in]
50k
151
alloy steel
86 mm
[3.39 in]
37,5
[1.48 in]
25,4 mm
[1.0 in]
31,8 mm
[1.25 in]
108 mm
[4.25 in]
M18 x 1.5/
thru
76,2 mm
[3.0 in]
4
sensing.honeywell.com
m WARNING
ADDITIONAL MATERIALS
The following associated literature is available on the Honeywell
web site at sensing.honeywell.com:
• Product line guide
• Product range guide
• Application note: Tension and Compression S-Beam Load
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the product
could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
Cells in Industrial and Medical Applications
m WARNING
MISUSE OF DOCUMENTATION
•
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Warranty/Remedy
Find out more
Honeywell serves its customers
through a worldwide network of
sales offices, representatives and
distributors. For application assistance, current specifications, pricing
or name of the nearest Authorized
Distributor, contact your local sales
office. To learn more about Honey-
Honeywell warrants goods of its manufacture as being free
of defective materials and faulty workmanship. Honeywell’s
standard product warranty applies unless agreed to otherwise by
Honeywell in writing; please refer to your order acknowledgement
or consult your local sales office for specific warranty details. If
warranted goods are returned to Honeywell during the period of
coverage, Honeywell will repair or replace, at its option, without
charge those items it finds defective. The foregoing is buyer’s
sole remedy and is in lieu of all other warranties, expressed
or implied, including those of merchantability and fitness for
a particular purpose. In no event shall Honeywell be liable for
consequential, special, or indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
well’s test and measurement products, call +1-815-235-6847 or
1-800-537-6945, visit measurementsensors.honeywell.com, or
e-mail inquiries to
info.tm@honeywell.com
Honeywell Sensing and Productivity Solutions
9680 Old Bailes Road
Fort Mill, SC 29707
honeywell.com
32314675-1-EN IL50 GLO
April 2016
© 2016 Honeywell International Inc. All rights reserved.