060-R186-06

MODEL FP5000 008927 Issue 2 Configurable Pressure Transducer DESCRIPTION The Honeywell Model FP5000 Series is a media-isolated piezoresistive silicon pressure sensor offering multiple output options (0 V to 5 V, 0 V to 10 V or 4 mA to 20 mA) for reading pressure over the specified fullscale pressure span and temperature range. It is compensated for sensor offset, sensitivity, temperature effects and non-linearity to offer improved thermal stability and accuracy. Hastelloy® C276 and 316L stainless steel wetted parts provide durability with abrasive or corrosive media. DIFFERENTIATION • Offers improved accuracy and reliability • Configurable platform enables a sensor to be built to customer requirements. Simplified nomenclature and order codes makes ordering easier • Many pressure and operating temperature range options • Built from stocked components; most configurations are shipped within ten business days • Extensive history of pressure measurement know-how VALUE TO CUSTOMERS • Built on the Honeywell history of higher-quality pressure sensing technologies • Next-gen design of the popular FP2000 pressure sensor • Offers more repeatable, reliable, and accurate pressure measurements over time • Rugged, stainless steel pressure sensors are built and tested to perform and survive in many demanding environments • Configurable platform creates a wide range of standard configurations • Stocked components enable shipping within ten business days on most configurations FEATURES • Pressure ranges from 10 in-H2O [0.36 psi] up to 5000 psi • Gage, absolute, vacuum, barometric and compound pressure types • Higher accuracy to 0.1 %FSS BFSL • Multiple output types: 0 Vdc to 5 Vdc, 0 Vdc to 10 Vdc, 4 mA to 20 mA • Multiple electrical and pressure connection options • Zero adjustment through potentiometer • Operating temperature ranges from -40°C to 125°C [-40°F to 250°F] • Multiple compensation temperature ranges APPLICATIONS • Test stands (Automotive, Aerospace, Industrial, and Medical) • R&D test labs • Hydraulic and pneumatic system monitoring • Leak detection • Manufacturing mold pressure control • Faster response and higher resolution • Pump and compressor control • Fully analog reduced-noise signal path provides continuous output resolution • Liquid level measurement • Oil & gas process control • Stainless steel construction • Ha C276 and 316L stainless steel wetted parts offer more enhanced durability with abrasive or corrosive media • CE approved • Intrinsically Safe: cFMus, ATEX, IEC Ex certified 2AR option (4 mA to 20 mA) PORTFOLIO Model FP5000 pressure transducers are part of a comprehensive line of Honeywell pressure sensors. CONFIGURABLE PRESSURE TRANSDUCER, MODEL FP5000 TABLE 1. PERFORMANCE SPECIFICATIONS TABLE 3. ELECTRICAL CONNECTORS Characteristic Measure Connector Operating Temperature Range Sealing Operating pressure ranges Gage: 10 in-H2O [0.36 psi] to 5000 psi Absolute: 5 psi to 5000 psi Vacuum: 10 in-H2O [0.36 psi] to 15 psi Barometric: 0 to 30 in-Hg, 16 to 32 in-Hg, 26 to 32 in-Hg Compound ranges available consult factory Equivalent ranges are available in other pressure units also: kPa, bar, mm-Hg, in-Hg, mbar, torr, in-H2O PT-02A-10-6P -40°C to 125°C [-40°F to 250°F] IP67 DIN FORM A -40°C to 125°C [-40°F to 250°F] IP65 DIN FORM C -40°C to 90°C [-40°F to 194°F] IP65 Integral cable -40°C to 105°C [-40°F to 221°F] IP67 Conduit fitting -40°C to 105°C [-40°F to 221°F] IP67 M12 x 1, 4-pin -40°C to 85°C [-40°F to 185°F] IP67 Accuracy1,7 0.2 %FSS BFSL (Standard accuracy) 0.1 %FSS BFSL (High accuracy) Output (selectable) 0 Vdc to 5 Vdc, 0 Vdc to 10 Vdc, or 4 mA to 20 mA (two wire) Resolution Continuous (Fully analog signal path) TABLE 2. ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Operating temperature range See Table 3 (Electrical connectors) Compensated temperature range See Table 4 (Thermal effects error band) Thermal effects error band (TEB)2,3 See Table 4 (Thermal effects error band) Sealing See Table 3 (Electrical connectors) Notes: 1. Accuracies stated are with respect to best fit straight line (BFSL) for all errors including linearity, hysteresis, and non-repeatability through zero. 2. Thermal Effects Error Band - The maximum deviation in output due to changes in temperature over the entire compensated temperature range, relative to output measured at reference temperature.  Includes all errors due to: Thermal Effect on Offset and Thermal Effect on Span. 3. Thermal effects error band (TEB) increases pro-rata for pressure ranges below 5 psi [0.35 bar]. 4. True Zero Output: The voltage output versions have onboard circuitry that allows the output signal to swing all the way to ground (True Zero) and even a little below (~-0.2 V). This mitigates increased error at lower voltage measurements. 5. Over pressure: The absolute maximum rating for pressure which may be safely applied to the product for it to remain in specification once pressure is returned to the operating pressure range. Exposure to higher pressure may cause permanent damage to the product. 6. Burst pressure: The maximum pressure that may be applied to the product without causing escape of the pressure media. The product should not be expected to function after exposure to any pressure beyond the rated burst pressure. 7. All specifications apply at 25°C [77°F] and under operating conditions unless otherwise noted. 8. Full Scale Span (FSS): The algebraic difference between output signal measured at the upper and lower limits of the operating pressure range. Also known as “span”. 9. Offset: The output signal obtained when the reference pressure is applied to all available pressure ports. Also known as “null” or “zero”. 10. Reference pressure: The pressure used as a reference (zero) in measuring product performance. Unless otherwise specified, this is vacuum (0 psia) for absolute pressure sensors and local ambient atmospheric pressure (0 psig) for gage/vacuum pressure sensors. 11. Minimum operating pressure: The lower limit of the operating pressure range. 2 sensing.honeywell.com TABLE 4. THERMAL EFFECTS ERROR BAND (TEB) Compensated Temperature Range For Standard Accuracy For High Accuracy 0° C to 60° C [40° F to 140° F] < ±0.75 %FSS < ±0.5 %FSS -20° C to 80° C [0° F to 180° F] < ±1.5 %FSS < ±1 %FSS -40° C to 85° C [-40° F to 185° F] < ±2.25 %FSS < ±1.5 %FSS -40° C to 125° C [-40° F to 250° F] < ±2.25 %FSS < ±1.5 %FSS TABLE 5. MECHANICAL SPECIFICATIONS Characteristic Measure Media Gas, liquid Over pressure5 Operating ranges ≤ 15 psi (1 bar): 6X FS 15 psi (1 bar) < Operating ranges ≤ 1000 psi (70 bar): 4X FS 1000 psi (70 bar) < Operating ranges ≤ 5000 psi (350 bar): 3X FS or 10000 psi (700 bar) whichever is less Burst pressure6 Operating ranges ≤ 15 psi (1 bar): 10X FS 15 psi (1 bar) < Operating ranges ≤ 1000 psi (70 bar): 6X FS 1000 psi (70 bar) < Operating ranges ≤ 5000 psi (350 bar): 4X FS or 10000 psi (700 bar) whichever is less Weight (approx.) 150 g [5.3 oz] Wetted parts material Ha C276 and 316L stainless steel Labels Laser engraved CONFIGURABLE PRESSURE TRANSDUCER, MODEL FP5000 TABLE 6. ELECTRICAL SPECIFICATIONS7 Specifications 2AM, 2AR: 4 mA to 20 mA (2 wire) 2AN: 0 V to 5 V (3 wire)4 2AP: 0 V to 10 V (3 wire)4 Supply voltage 9 Vdc to 28 Vdc 9 Vdc to 28 Vdc 14 Vdc to 28 Vdc Current consumption 4 mA to 24 mA < 6 mA < 6 mA Output at minimum operating pressure11 - (compound, barometric) 4 mA ±0.5 %FSS 0 V ±0.5 %FSS 0 V ±0.5 %FSS Full scale span (FSS)8 16 mA ±1 %FSS 5 V ±1 %FSS 10 V ±1 %FSS Frequency response 3500 Hz 3500 Hz 3500 Hz Reverse voltage protection Yes, 28 V Yes, 28 V Yes, 28 V Load impedance < 950 Ohm at 28 V decreasing linearly to 0 Ohm at 9 V > 10K Ohms > 10K Ohms Output at reference pressure 10 (absolute, gage, vacuum) Insulation resistance >500 MOhm to case GND at 33 V >500 MOhm to case GND at 33 V >500 MOhm to case GND at 33 V Overvoltage protection >32 V >32 V >32 V Power up time < 1 sec < 1 sec < 1 sec Zero adjustment potentiometer Yes, > ±5 %FS adjustment, accessible from top after demounting connector Yes, > ±5 %FS adjustment, accessible from top after demounting connector Yes, > ±5 %FS adjustment, accessible from top after demounting connector Sensing and Internet of Things 3 CONFIGURABLE PRESSURE TRANSDUCER, MODEL FP5000 TABLE 7. DIN FORM A (6M), DIN FORM C (6BO) WIRING STANDARD PIN ALTERNATIVE 4 mA to 20 mA (2AM, 2AR) 0 V to 5 V/0 V to 10 V (2AN, 2AP) 4 mA to 20 mA (2AM, 2AR) 0 V to 5 V/0 V to 10 V (2AN, 2AP) Designation Designation Designation Designation 1 (+) Supply (+) Supply (+) Supply (+) Supply 2 (+) Output (+) Output (+) Output Supply return/ (-) Output 3 No connection Supply return/ (-) Output No connection (+) Output E No connection No connection Case GND Case GND TABLE 8. PT02A-10-6P, 6-PIN (6A) WIRING STANDARD PIN ALTERNATIVE 4 mA to 20 mA (2AM, 2AR) 0 V to 5 V/0 V to 10 V (2AN, 2AP) 4 mA to 20 mA (2AM, 2AR) 0 V to 5 V/0 V to 10 V (2AN, 2AP) Designation Designation Designation Designation A (+) Supply (+) Supply (+) Supply (+) Supply B No connection Supply return (+) Output (+) Output C No connection (-) Output No connection No connection D (+) Output (+) Output No connection Supply return/ (-) Output E No connection No connection No connection No connection F No connection No connection No connection No connection TABLE 9. INTEGRAL CABLE (6Q), CONDUIT FITTING (6R) WIRING STANDARD ALTERNATIVE 4 mA to 20 mA (2AM, 2AR) 0 V to 5 V/0 V to 10 V (2AN, 2AP) 4 mA to 20 mA (2AM, 2AR) 0 V to 5 V/0 V to 10 V (2AN, 2AP) Designation Designation Designation Designation Red (+) Supply (+) Supply (+) Supply (+) Supply Black (+) Output Supply return Not available Supply return/ (-) Output Green Not available (-) Output Not available Not available White Not available (+) Output (+) Output (+) Output PIN TABLE 10. M12 X 1, 4-PIN (6BJ) WIRING STANDARD ALTERNATIVE 4 mA to 20 mA (2AM, 2AR) 0 V to 5 V/0 V to 10 V (2AN, 2AP) 4 mA to 20 mA (2AM, 2AR) 0 V to 5 V/0 V to 10 V (2AN, 2AP) Designation Designation Designation Designation 1 (+) Supply (+) Supply (+) Supply (+) Supply 2 No connection (+) Output (+) Output No connection 3 (+) Output Supply return/ (-) Output No connection Supply return/ (-) Output 4 Case GND Case GND Case GND (+) Output PIN TABLE 11. INTRINSICALLY SAFE APPROVALS FOR OPTION 2AR (NOT AVAILABLE ON 2AM, 2AN, 2AP) Agency Approvals cFMus Class I, Div 1, Groups A, B, C, D Class I, Zone 0, AEx/Ex ia IIC T4/T5 Ga Ta= -40°C to 40°C (T5), -40°C to 85°C (T4) ATEX II 1 G Ex ia IIC T4/T5 Ga Ta= -40°C to 40°C (T5), -40°C to 85°C (T4) IEC Ex Ex ia IIC T4/T5 Ga Ta= -40°C to 40°C (T5), -40°C to 85°C (T4) See Honeywell’s website (http://sensing.honeywell.com) for up-to-date information regarding intrinsically safe approvals. Refer to Installation manual #008-0751-00 for installation/wiring instructions, cautions and warnings. 4 sensing.honeywell.com CONFIGURABLE PRESSURE TRANSDUCER, MODEL FP5000 Figure 1. Product Nomenclature NF G 1 BR , 1AK , 2AM , 5F , 6M ,7BA Calibration Product Series NF 5-point calibration at 77°F FP5000 pressure transducer 9A 9-point calibration at 77°F Type G A V B C Wiring Gage Absolute 7BA 7BB Vacuum Barometric (UG, UQ, UR only) Standard Alternative Compound (consult factory) Electrical Connection Accuracy 1 2 * 6A 6M 6BO 6Q 6R 6BJ 0.10 %* 0.20 % Not available in ranges < 2 psi Range KD KF KG KH KJ KL KM KQ KR KS KT kPa 35 kPa 100 kPa 200 kPa 300 kPa 700 kPa 1000 kPa 1500 kPa 3000 kPa 5000 kPa 7000 kPa 10000 kPa in-H2O WA* WC* WE* WG* 10 in-H2O 20 in-H2O 30 in-H2O 50 in-H2O psi bar ME MF NA MG NB MH MI MJ NC MK ND ML NE MY NG 1 bar 2 bar 3.5 bar 5 bar 7 bar 10 bar 20 bar 30 bar 35 bar 50 bar 70 bar 100 bar 135 bar 200 bar 350 bar in-Hg UG 30 in-Hg UQ 16-32 in-Hg UR 26-32 in-Hg More ranges are available. Please consult Honeywell for options. AN* AP* AT AV BJ BL BM BN BP BR CJ CL CN CP CQ CR CS CT CV DJ DL DM DN DR DIN A 43650, 4-pin DIN C, 4-pin Integral cable, 5 feet# Conduit fitting with 5 feet# cable M12 x 1 (IEC 61076-2-101 style AM), 4-pin Consult factory for other cable lengths # 0.5 psi 1 psi 5 psi 10 psi 15 psi 25 psi 30 psi 50 psi 75 psi 100 psi 150 psi 200 psi 250 psi 300 psi 400 psi 500 psi 600 psi 750 psi 1000 psi 1500 psi 2000 psi 2500 psi 3000 psi 5000 psi * Not available in absolute pressure type PT02A-10-6P, 6-pin Pressure Port 5A 5B 5D 5F 5G 5P 5AE 5I 1/4-18 NPT female 1/4-18 NPT male 7/16-20 UNF male G1/4 B female G1/4 B male M12 x 1.5 male 1/2-14 NPT male 1/8-27 NPT male Output 2AM 2AN 2AP 2AR 4 mA to 20 mA 0 Vdc to 5 Vdc 0 Vdc to 10 Vdc 4 mA to 20 mA Intrinsically Safe (see Table 11 for certifications) Temperature Compensation Ranges with blue highlight (greater than 100 kPa, 15 psi, 1 bar) are NOT available in Vacuum. 1AK 1Y1 1AP1 1BA2 1 2 0°C to 60°C [40°F to 140°F] -20°C to 80°C [0°F to 180°F] -40°C to 85°C [-40°F to 185°F] -40°C to 125°C [-40°F to 250°F] 1Y and 1AP not available for pressure ranges below 5 psi [0.35 bar] 1BA not available for pressure ranges below 50 psi [3.5 bar] SAMPLE CATALOG LISTINGS Order Code Description NFA1BM,1AK,2AP,5A,6A,7BA Model FP5000; 0.10% accuracy; 30 psi absolute; compensated across 0°C to 60°C [40°F to 140°F]; 0 Vdc to 10 Vdc output; 1/4-18 NPT female port; PT02A-10-6P 6-pin electrical connector; standard wiring NFG2DR,1Y,2AR, 5G,6Q,7BB Model FP5000; 0.20% accuracy; 5000 psi gage; compensated across -20°C to 80°C [0°F to 180°F]; Intrinsically Safe 4 mA to 20 mA output; G 1/4 B male port; 5 ft long integral cable; alternative wiring Sensing and Internet of Things 5 CONFIGURABLE PRESSURE TRANSDUCER, MODEL FP5000 Figure 2. Mounting Dimensions ELECTRICAL TERMINATION Code 6BO: 4-pin, Micro DIN Form C Code 6M: 4-pin, Standard DIN 43650 Form A Ø 31,8 [1.3] Ø 31,8 [1.3] 10,4 [0.4] 26,0 [1.1] Code 6Q: 4-conductor, vented, Code 6R: 4-conductor, vented, Code 6BJ: 4-pin M12 x 1 1/2-14 NPT conduit exit with Integral cable (IEC 61076-2-101) style AM integral cable Code 6A: 6-pin, Bendix connector 7,9 [0.3] 18,2 [0.7] 8,8 [0.3] 21,3 [0.8] 10,4 [0.4] Ø 31,8 [1.3] Ø 25,0 [1.0] 8,8 [0.3] Code 5F: G 1/4 B female Code 5A: 1/4-18 NPT female 37,1 [1.5] 37,1 [1.5] 22,2 [0.9] 22,2 [0.9] Code 5G: G 1/4 B male 15,1 [0.6] 22,2 [0.9] 22,2 [0.9] 6 sensing.honeywell.com 35,8 [1.4] 41,1 [1.6] 18,4 [0.7] Code 5D: 7/16-20 UNF male 16,8 [0.7] 27,2 [1.1] Choose from electrical termination code: 6BO, 6M, 6A, 6Q, 6BJ & 6R Choose from pressure ports: Codes 5AE, 5G, 5P, 5B, 5D, or 5I 16,8 [0.7] Code 5B: 1/4-18 NPT male 10,4 [0.4] Ø 25,0 [1.0] Ø 25,0 [1.0] Choose from pressure ports: Codes 5F or 5A PRESSURE PORTS Ø 31,8 [1.3] Ø 31,8 [1.3] Code 5AE: 1/2-14 NPT male 18,0 [0.7] Code 5P: M12 x 15 male Code 5I: 1/8-27 NPT male 15,2 [0.6] 13,2 [0.5] , CAUTION m WARNING • DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. PRODUCT DAMAGE DUE TO MECHANICAL ISSUES PERSONAL INJURY Ensure torque specifications are determined for the specific application. (Mating materials and thread sealants can result in significantly different torque values from one application to the next.) • When using mating parts made of stainless steel, use a thread sealant with anti-seize properties to prevent thread galling. Ensure the sealant is rated for the application. • Use appropriate tools (such as an open-ended wrench or deep-well socket) to install transducers. • Always hand-start transducers into the hole to prevent cross threading and damage. • Ensure that torque is not applied to the electrical connector. • Ensure that the proper mating electrical connector with a seal is used to connect the transducer. Improper or damaged seals can compromise ingress protection, leading to short circuits. • To ensure proper environmental sealing and electrical connections when using a connector, follow the connector manufacturer’s installation guidelines. • All terminal cavities must be sealed using the correct wire gauge and seal combination. • If only two leads are used, any additional terminal cavities should be sealed per the connector manufacturer’s installation guide. • Honeywell recommends using a crimping tool for crimping wires to the connector terminals. • Contact the individual connector manufacturer for connector wiring. Failure to comply with these instructions could result in product damage. , NOTICE Refer installation manual #008-0751-00 for installation/ wiring instructions, cautions and warnings related to Intrinsically Safe FP5000 (option 2AR). FOR MORE INFORMATION Honeywell Sensing and Internet of Things services its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing, or the nearest Authorized Distributor, visit sensing.honeywell.com or call: USA/Canada +302 327 8920 Latin America +1 305 805 8188 Europe +1 302 327 8920 Japan +81 (0) 3-6730-7152 Singapore +65 6355 2828 Greater China +86 4006396841 Failure to comply with these instructions could result in death or serious injury. m WARNING MISUSE OF DOCUMENTATION • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Warranty/Remedy Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship during the applicable warranty period. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgment or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items that Honeywell, in its sole discretion, finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While Honeywell may provide application assistance personally, through our literature and the Honeywell website, it is buyer’s sole responsibility to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this writing. However, Honeywell assumes no responsibility for its use. Honeywell Sensing and Internet of Things 830 East Arapaho Road Richardson, TX 75081 Hastelloy® is a registered trademark of Haynes International, Inc. 008927-2-EN | 2 | 06/20 © 2020 Honeywell International Inc.