12TS115-7

Manual Switches Toggle Switches TS Series ELECTRICAL RATINGS UL/CSA Rating Code 2-pole shown Electrical Rating L192 10 Amps, 125, 250, 277 VAC 1⁄4 HP, 125 VAC 1⁄2 HP, 250, 277 VAC 3 Amps, 125 VAC ‘‘L’’ L191 15 Amps, 125, 250, 277 VAC HP, 125 VAC 1 HP, 250, 277 VAC 5 Amps, 125 VAC (L) 1⁄2 Colored sleeves for levers (not shown) can also be furnished. See page 149. TERMINAL CIRCUIT IDENTIFICATION Terminal identifications are referred to in the Ordering Charts to indicate which circuits are made in each toggle position (i.e., 1-2 reference indicates circuit closure through terminals 1 and 2). MOUNTING DIMENSIONS (For reference only) 1-pole FEATURES 1 2 or 3-position, momentary and maintained action. 1 1 and 2-pole circuitry. 1 Rated up to 15 amps. 1 Lever-to-bushing seal. 1 Solder, screw, or quick-connect terminals. 1 UL recognized, CSA certified. 1 CE approved 2-pole Application Note: Honeywell MICRO SWITCH does not recommend the use of silver cadmium oxide switch contacts in non-arcing loads. Nonarcing loads are generally loads less than 12 volts and/or 0.5 amp. TS switches use silver cadmium oxide contacts. If you have questions, contact the MICRO SWITCH Application Center at 1-800-5376945. 2-POSITION ORDER GUIDE Circuit(s) Made With Toggle At: No. Of Poles 1 2 Keyway Position Opposite Keyway UL/CSA Rating Code Screw Terminals Solder Terminals Quick-Connect Terminals OFF 2-3 ON L191 11TS15-2 11TS115-2 11TS95-2 2-1 ON 2-3 ON L191 11TS15-3 11TS115-3 11TS95-3 OFF* 2-3 ON L192 11TS15-4 11TS115-4 11TS95-4 2-1 ON* OFF L192 11TS15-6 11TS115-6 11TS95-6 2-1 ON* 2-3 ON L192 11TS15-8 11TS115-8 11TS95-8 OFF 2-3 & 5-6 ON L191 12TS15-2 12TS115-2 12TS95-2 2-1 & 5-4 ON 2-3 & 5-6 ON L191 12TS15-3 12TS115-3 12TS95-3 OFF* 2-3 & 5-6 ON L192 12TS15-4 12TS115-4 12TS95-4 2-1 & 5-4 ON* OFF L192 12TS15-6 12TS115-6 12TS95-6 2-1 & 5-4 ON* 2-3 & 5-6 ON L192 12TS15-8 12TS115-8 12TS95-8 3-POSITION ORDER GUIDE Circuit(s) Made With Toggle At: Center Position Opposite Keyway UL/CSA Rating Code 1 2-1 ON OFF 2-3 ON NONE OFF 2-3 ON 2-1 ON* OFF 2-3 ON 2-1 ON* OFF NONE 2 Screw Terminals Solder Terminals Quick-Connect Terminals L191 11TS15-1 11TS115-1 11TS95-1 L191 11TS15-21 — 11TS95-21 L192 11TS15-5 11TS115-5 11TS95-5 L192 11TS15-61 — 11TS95-61 2-1 ON* OFF 2-3 ON* L192 11TS15-7 11TS115-7 11TS95-7 2-1 & 5-4 ON OFF 2-3 & 5-6 ON L191 12TS15-1 12TS115-1 12TS95-1 NONE OFF 2-3 & 5-6 ON L191 12TS15-21 12TS115-21 12TS95-21 2-1 & 5-4 ON* OFF 2-3 & 5-6 ON L192 12TS15-5 12TS115-5 12TS95-5 2-1 & 5-4 ON* OFF NONE L192 12TS15-61 12TS115-61 12TS95-61 2-1 & 5-4 ON* OFF 2-3 & 5-6 ON* L192 12TS15-7 12TS115-7 12TS95-7 2-1 & 5-4 ON 2-1 & 5-6 ON 2-3 & 5-6 ON L191 — 12TS115-10 12TS95-10 * Marked toggle positions are momentary. All other positions are maintained. Honeywell 1 Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada 135 Toggle/Rockers No. Of Poles Keyway Position