MICRO SWITCH™ Premium
Miniature Basic Switches
V7 Series
Datasheet
MICRO SWITCH™ V7 Series
Premium Miniature Basic Switches
Honeywell’s MICRO SWITCH™ V7 miniature switches are designed for long term-reliability in a rugged switch
packaged with a thermoplastic housing. These switches may be installed in a wide range of applications from simple
or precision on/off limits, presence/absence sensing, or embedded in pressure or temperature assemblies.
The V7 switch is available as a pin plunger style or with optional integral or auxiliary levers to actuate the switch and
offer versatility in the application. The switch requires as little as 0,15 Newtons [approximately ½ ounce] to operate
for extremely sensitive applications or an operating force of almost 4 Newtons [14 ounces] where higher forces are
required. The V7 switch can reliably control logic level electrical loads from less than 0.1 A to power duty switching up
to 25 A. Agency certifications for the MICRO SWITCH™ V7 switches are provided through CSA, ENEC, and UL for
global use around the world.
What makes our switches better?
Certified with CSA, ENEC, and UL for global acceptability
Reliable snap-spring mechanism with more than 60 years of
proven service
Available with pin plungers, integral levers (fitted two positions), or auxiliary levers to meet equipment requirements
Electrical ratings from 0.1 A up to 25 A for
design flexibility in one package size
Big performance in a small package.
COST OPTIMIZATION • RELIABILITY
PERFORMANCE • GLOBAL ACCEPTANCE
2
sensing.honeywell.com
Features
and Benefits
ACTUATION ON TIME
MICRO SWITCH™ V7 Series basic switches operate with forces as low
as 15 g and carry options to increase to 397 g, and can thereby easily
accommodate different actuator mechanisms.
Global acceptance: UL, CSA, ENEC
RELIABLE PERFORMANCE IN HARSH CONDITIONS
Switches feature industry-leading temperature ranges of -40 °C to 175 °C [-40
°F to 347 °F] to allow for years of reliable performance in harsh conditions.
LONG LIFE CYCLE RATING
The long life cycle rating (up to 10,000,000 cycles) reduces the need to replace
switches over the life of OEM platform applications, therefore reducing total system
cost.
DESIGN FLEXIBILITY
Available with pin plungers, integral levers (fitted 2 positions), and auxiliary levers to
meet a variety of equipment requirements, MICRO SWITCH™ V7 Series switches
also boast electrical ratings from 0.1 A up to 25 A for design flexibility in one
package size.
Potential Applications
VENDING MACHINE MOTORS
Switch controls motors or solenoids in vending machines for dispensing of product.
MICROWAVE DOOR INTERLOCK
Switch in door interlock of microwave that disconnects power if door opened.
OVEN CLEANING LATCH
Switch in door latch for oven clean operation.
PRESSURE SWITCH ASSEMBLY
Pressure switch senses incoming water pressure for power washer.
sensing.honeywell.com
3
V7 Series
PRODUCT NOMENCLATURE
V7
—
Operating
Force
Switch TypeA
V7 Series
Miniature 1
1N
4
1
1
7
D8
Circuitry
Code
Mounting/
ConstructionD,F
Termination Style
C
Electrical RatingC,F
North
Europe
America (ENEC)
(Inches)
—
—
Lever
StyleB
Special
Designator
150 g max.
A
5A@
125 Vac
3A
1
SPDT
3
150 °C
2,9 mm [0.11 in]
mtg. holes
D8
0.187 x 0.02
quick connect
002
175 g max.
B
11 A @
125 Vac
10 A
2
SPNO
4
150 °C
3,1 mm [0.12 in]
mtg. holes
E8
0.187 x 0.02
quick connect
spread
022
Use only if this switch
Straight
22,1 mm [0.87 in] has a special feature.
Could be any number.
Straight
35,6 mm [1.4 in]
__
D9
0.250 x 0.032
quick connect
201
Roller
20,6 mm [0.81 in]
E9
0.250 x 0.032
quick connect
spread
207
Roller
34,0 mm [1.34 in]
P02
Left angle
PCB
263
Sim. roller
32,8 mm [1.29 in]
P07
SPNO on
edge PCB
266
Tall sim. roller
34,0 mm [1.34 in]
048
Straight
59,4 mm [2.34 in]
636
Paddle
139,5 mm [5.5 in]
1P
225 g max.
CK
15 A @
125 Vac
2G
75 g max.
D
1A@
125 Vac
1A
8
85 °C
2,9 mm [0.11 in]
mtg. holes
85 °C
3,1 mm [0.12 in]
mtg. holes
3H
50 g max.
E
10 A @
125 Vac
5A
9F
85 °C
2,9 mm [0.11 in]
mtg. holes
4I
25 g max.
F
3A@
125 Vac
__
0F
5J
15 g max.
H
No
rating
__
AE
6
6 oz to 14 oz
max.
K
22 A @
125 Vac
20 A
7
8 oz max.
SL
0.1 A @
125 Vac
1A
9
300 g max.
V
21 A @
125 Vac
16 A
WE,M 125 Vac
15.1 A @
__
XE,K
6A@
125 Vac
__
Z
25 A @
125 Vac
20 A
sensing.honeywell.com
3
O
N
L
Y
SPNC
7
85 °C
3,1 mm [0.12 in]
mtg. holes
177 °C with
2,9 mm [0.11 in]
mtg. holes
Formed quick-connect
terminals available
Formed levers available
NOTES:
A
Not all possible combinations are available, these are only guidelines
B
Lever length measured from center of back mounting hole to end of straight lever or center of roller
C
All ratings are UL/CSA, and where noted are also European-rated ENEC
D
Consider the temperature required and the mounting hole size when making this selection
E
Electric ratings “W” and “X” only used with “A” Mounting Construction and vice versa
F
European ENEC rating requires Mounting Construction code “9” or “0”, and Electrical Ratings A,B,D,E,K,S,V,Z
G
Not applicable for Electrical Ratings C,K,V,W,X,Z
H
Not applicable for Electrical Ratings B,C,K,V,W,X,Z
I
Applies to Electrical Ratings A,D,F,S only
J
Applies to Electrical Ratings D,F,S only
K
Applies to 150 g Operate Force and higher
L
Applies to 15 g to 150 g Operate Force
M
Applies to only 300 g Operate Force
N
Applies to only Electrical Rating V
P
Applies to only Electrical Ratings K,Z
MICRO SWITCH™ Premium Miniature Basic Switches
Table 1. Specifications
Characteristic
Parameter
Circuitry
SPDT, SPNC, SPNO
Operating force
0,25 N to 3,9 N [15 g to 397 g]
Termination
quick connect; 4,75 mm x 0,51 mm [0.187 in x 0.02 in]
quick connect: 6,35 mm x 0,81 mm [0.25 in x 0.032 in]
PCB (printed circuit board)
Actuators
pin plunger, integral lever options, auxiliary lever options
Agency certification
Operating temperature
CSA, ENEC, UL; RoHS compliant
-40 °C to 85 °C [-40 °F to 185 °F], options for 175 °C [347 °F]
Mechanical life
up to 10 million cycles
Contact material
silver, gold plated, gold alloy
Housing material
high strength thermoplastic
Table 2. Electrical Ratings
Rating code
UL, CSA
ENEC3
A
5 A 125 Vac, 250 Vac, 277 Vac
1/10 HP 250 Vac
3 (1) A, 250 Vac 2
B
11 A 1/3 HP 125 Vac, 250 Vac or 277 Vac
1/2 A 125 Vdc; 1/4 A 250 Vdc
4 A 125 Vac “L” 1
10 (3) A, 250 Vac 2
C
15.1 A 1/2 HP 125 Vac, 250 Vac or 277 Vac
1 /2A 125 Vdc
1/4 A 250 Vdc; 5 A 125 Vac “L” 1
–
E
10 A 1/3 HP 125 Vac, 250 Vac or 277 Vac
1/2 A 125 Vdc
1/4 A 250 Vdc, 4 A 125 Vac “L” 1
5 (2) A, 250 Vac 2
F
3 A 125 Vac, 250 Vac, 277 Vac
1/10 HP 250 Vac
–
S
0.1 A, 125 Vac
1 (0.05) A, 250 Vac 2
V
21 A 1 HP 125 Vac, 250 Vac, 277 Vac
2 HP 250 Vac, 277 Vac
16 (4) A, 250 Vac 2
W
15.1 A 125 Vac, 250 Vac, 277 Vac
–
Z
25 A, 277 Vac
1 HP, 125 Vac; 2 HP, 250 Vac
20 (5) A, 250 Vac 2
Incandescent lamp rating
XX(Y) - XX = max. rated resistive value in amps, and (Y) = max. rated inductive value in amps
3
European ENEC rating requires Mounting Construction code “9” or “0”. See page four, Mounting Construction column
1
2
sensing.honeywell.com
5
V7 Series
O.F. • Operating force
R.F. • Release force
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
O.P. • Operating position
PRODUCT SPECIFICATIONS AND LISTINGS
Contact your Honeywell rep or distributor for additional listings
Catalog Listing
Pin plunger
Elect.
Rating
UL/CSA
(CE)
Elect.
Rating
Spec.
Contacts
O.F. max.
newtons
[grams]
O.P. nominal
mm [inches]
P.T. max.
mm
[inches]
O.T. min.
mm
[inches]
D.T.
mm [inches]
(page 4)
V7-2S17DB
0.1 A (---)
S
SPDT
0,79 [75]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-1S17D8
0.1 A (---)
S
SPDT
1,47 [150]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-5F17D8
3 A (---)
F
SPDT
0,15 [15]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-4A17D8
5 A (---)
A
SPDT
0,25 [25]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-3E17D8
10 A (---)
E
SPDT
0,49 [50]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-1B37D8
11 A (---)
B
SPNC
1,47 [150]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-2B17D8
11 A (---)
B
SPDT
0,74 [75]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-2B17E9
11 A (---)
B
SPDT
0,74 [75]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-7B17D8
11 A (---)
B
SPDT
2,22 [227]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-1C17D8
15 A (---)
C
SPDT
1,47 [150]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-1C17E9
15 A (---)
C
SPDT
1,47 [150]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-1C37B8
15 A (---)
C
SPNC
1,47 [150]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-1V19E9
21 A (16 A)
V
SPDT
1,72 [175]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-1V29E9
21 A (16 A)
V
SPNO
1,72 [175]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-1V39E9
21 A (16 A)
V
SPNC
1,72 [175]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-1Z19E9
25 A (20 A)
Z
SPDT
2,21 [225]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-1Z29E9
25 A (20 A)
Z
SPNO
2,21 [225]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-1Z20E9*
25 A (20 A)
Z
SPNO
2,21 [225]
14,7 [0.578]
1,19 [0.047]
1,27 [0.050]
0,05 - 0,25
[0.002-0.010]
V7-1C17D8-002
15 A (---)
C
SPDT
1,57 [160]
15,2 [0.600]
1,52 [0.060]
0,89 [0.035]
0,36 [0.015] max.
V7-1C17E9-002
15 A (---)
C
SPDT
1,57 [160]
15,2 [0.600]
1,52 [0.060]
0,89 [0.035]
0,36 [0.015] max.
V7-6C18D8-002*
15 A (---)
C
SPDT
4,05 [413]
15,2 [0.600]
1,52 [0.060]
0,89 [0.035]
0,36 [0.015] max.
BZ/BA Type
Lever
22,1 mm
[0.87 in]
*3,1 mm mtg holes
6
sensing.honeywell.com
MICRO SWITCH™ Premium Miniature Basic Switches
PRODUCT SPECIFICATIONS AND LISTINGS
Contact your Honeywell rep or distributor for additional listings
Catalog Listing
Lever
35,6 mm
[1.40 in]
Lever
59,4 mm
[2.34 in]
Lever Sim.
Roll 32,8 mm
[1.29 in]
Lever, Roller
20,57 mm
[0.81 in]
Lever, Roller
34,04 mm
[1.34 in]
Elect.
Rating
UL/CSA
(CE)
Elect.
Rating
Spec.
O.F. • Operating force
R.F. • Release force
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
O.P. • Operating position
Contacts
O.F. max.
newtons
[grams]
O.P. nominal
mm [inches]
P.T. max.
mm
[inches]
O.T. min.
mm
[inches]
D.T.
mm [inches]
(page 4)
V7-1S17D8-022
0.1 A (---)
S
SPDT
0,83 [85]
15,2 [0.60]
3,04 [0.120]
2,16 [0.085]
0,76 [0.030] max.
V7-3S17D8-022
0.1 A (---)
S
SPDT
0,29 [30]
15,2 [0.60]
3,04 [0.120]
2,16 [0.085]
0,76 [0.030] max.
V7-3S17E9-022
0.1 A (---)
S
SPDT
0,29 [30]
15,2 [0.60]
3,04 [0.120]
2,16 [0.085]
0,76 [0.030] max.
V7-1B17D8-022
11 A (---)
B
SPDT
0,80 [82]
15,3 [0.603]
3,04 [0.120]
1,70 [0.067]
0,69 [0.027] max.
V7-1B19D8-022
11 A (10 A)
B
SPDT
0,80 [82]
15,3 [0.603]
3,25 [0.128]
1,78 [0.070]
0,71 [0.028] max.
V7-2B17D8-022
11 A (---)
B
SPDT
0,40 [41]
15,3 [0.603]
3,04 [0.120]
1,70 [0.067]
0,71 [0.027] max.
V7-6B19E9-022
11 A (10 A)
B
SPDT
2,11 [215]
15,2 [0.60]
3,25 [0.128]
1,35 [0.053]
0,76 [0.030] max.
V7-3S17D8-048
0.1 A (---)
S
SPDT
0,16 [16]
15,3 [0.603]
5,97 [0.235]
3,00 [0.118]
1,27 [0.050] max.
V7-2B17D8-048
11 A (---)
B
SPDT
0,20 [20]
15,3 [0.603]
5,97 [0.235]
2,92 [0.115]
1,27 [0.050] max.
V7-1C17D8-048
15 A (---)
C
SPDT
0,44 [45]
15,2 [0.603]
5,94 [0.234]
4,19 [0.165]
1,52 [0.060] max.
V7-1V19E9-048
21 A (16 A)
V
SPDT
0,54 [55]
15,4 [0.605]
6,35 [0.250]
3,05 [0.120]
1,40 [0.055] max.
V7-9W1AE9-048**
15 A (---)
W
SPDT
0,88 [90]
15,2 [0.603]
6,35 [0.250]
3,15 [0.124]
1,37 [0.054] max.
V7-1S17D8-263
0.1 A (---)
S
SPDT
0,88 [90]
18,54 [0.730]
2,79 [0.110]
1,90 [0.075]
0,76 [0.030] max.
V7-3E19E9-263
10 A (5 A)
E
SPDT
0,32 [33]
18,54 [0.730]
2,54 [0.100]
1,90 [0.075]
0,76 [0.030] max.
V7-1B17D8-263
11 A (---)
B
SPDT
0,88 [90]
18,54 [0.730]
2,79 [0.110]
1,52 [0.060]
0,76 [0.030] max.
V7-1C17D8-263
15 A (---)
C
SPDT
0,89 [91]
18,54 [0.730]
2,79 [0.110]
1,55 [0.061]
0,61 [0.024] max.
V7-1V29E9-263
21 A (16 A)
V
SPNO
1,08 [110]
18,49 [0.728]
2,90 [0.114]
1,62 [0.064]
0,64 [0.025] max.
V7-1Z10E9-263*
25 A (20 A)
Z
SPDT
1,33 [136]
18,49 [0.728]
2,90 [0.114]
1,62 [0.064]
0,64 [0.025] max.
V7-2S17D8-201
0.1 A (---)
S
SPDT
0,88 [90]
20,57 [0.810]
1,19 [0.047]
1,02 [0.040]
0,38 [0.015] max.
V7-6B19E9-201
11 A (10 A)
B
SPDT
4,50 [459]
20,52 [0.808]
1,42 [0.056]
0,86 [0.034]
0,33 [0.013] max.
V7-7B17D8-201
11 A (---)
B
SPDT
2,78 [283]
20,52 [0.808]
1,42 [0.056]
0,86 [0.034]
0,33 [0.013] max.
V7-1C17D8-201
15 A (---)
C
SPDT
1,72 [175]
20,57 [0.810]
1,19 [0.047]
0,81 [0.032]
0.30 [0.012] max.
V7-1S17D8-207
0.1 A (---)
S
SPDT
0,83 [85]
20,57 [0.810]
2,84 [0.112]
2,03 [0.080]
0,76 [0.030] max.
V7-2A17D8-207
5 A (---)
A
SPDT
0,42 [43]
20,57 [0.810]
2,92 [0.115]
1,52 [0.060]
0,64[0.025] max.
V7-1B17D8-207
11 A (---)
B
SPDT
0,83 [85]
20,57 [0.810]
2,92 [0.115]
1,52 [0.060]
0,76 [0.030] max.
V7-1C17D8-207
15 A (---)
C
SPDT
0,88 [90]
20,57 [0.810]
2,92 [0.115]
1,52 [0.060]
0,64[0.025] max.
V7-1V19E9-207
21 A (16 A)
V
SPDT
0,98 [100]
20,52 [0.808]
3,07 [0.121]
1,65 [0.065]
0,76 [0.030] max.
*3,1 mm mtg holes
** 177 °C [350 °F]
sensing.honeywell.com
7
V7 Series
AVAILABLE TERMINALS
Quick Connect (QC)
Printed Circuit Board (PO2)
D8 Terminals: 0.187 in wide x 0.020 in thick.
E8 Terminals: 0.187 in wide x 0.020 in thick.
These terminals interface with snap-on receptacles and other
components from AMPMODU interconnection system.
E9 Terminals: 0.250 in wide x 0.032 in thick.
STANDARD ACTUATOR OPTIONS
10,2
0.40
Roller Lever (-201)
Straight Lever (-022)
Roller Lever (-207)
Straight Lever (-048)
Simulated Roller Lever (-263)
6,4
0.25
20,2
0.80
2,8
0.11
2,8
00.11
1,0
.04
2,90
Ø hole (3,10/.122 option)
0.114
10,3
0.41
2,8
0.11
3,20
dia
0.126
3,46
0.134
opt
1,5
0.06
8,9
0.35
18,2
max.
0.72
NC
COM
2,90
dia
0.114
3,10
0.122
opt
Straight Lever (-002)
NO
2,4
0.10
14,4
0.57
22,2
0.88
28,8
1.14
0,8 (3)
0.03
Straight lever (-022)
ACCESSORIES
8
sensing.honeywell.com
Part Number
Description
15PA177-V7
Insulator packet: 500 pieces of 0,46 mm [0.018 in] thick varnished fiberglass
15PA260
Plunger boot seal: Elastomer, dust and splash resistant
(Switch not included)
ADDITIONAL INFORMATION
The following associated literature is available on the Honeywell web
site at sensing.honeywell.com:
• Product installation instructions
• Product range guide
• Product nomenclature tree
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
• Product application-specific information
– Application note: Electronic sensors and electromechanical
switches in valves and flow meters
– Application note: Electronic sensors and MICRO SWITCH™
switches in industrial air compressors
– Application note: Sensors and switches for HVAC/R
applications
– Application note: Sensors and switches in oil rig applications
– Application note: Sensors and switches in sanitary valves
– Application note: Sensors and switches for valve monitors and
valve indicators
– Application note: Treadmill equipment
WARNING
MISUSE OF DOCUMENTATION
•
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
– Application note: V7 available terminals
WARRANTY/REMEDY
– Technical bulletin: Applying precision switches
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s standard
product warranty applies unless agreed to otherwise by Honeywell
in writing; please refer to your order acknowledgement or consult
your local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge those
items it finds defective. The foregoing is buyer’s sole remedy
and is in lieu of all other warranties, expressed or implied,
including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
– Technical bulletin: Low energy switch guide
Find out more
Honeywell serves its customers
through a worldwide network
of sales offices, representatives
and distributors. For application
assistance, current specifications,
pricing or name of the nearest
Authorized Distributor, contact
your local sales office.
To learn more about Honeywell’s
While we provide application assistance personally, through our
literature and the Honeywell website, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
sensing and switching products,
call +1-815-235-6847 or
1-800-537-6945,
visit sensing.honeywell.com,
or e-mail inquiries to
info.sc@honeywell.com
Sensing and Productivity Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
honeywell.com
004987-3-EN IL50 GLO
October 2015
Copyright © 2015 Honeywell International Inc. All rights reserved.
