22000-001A

Thermostats and Heaters Series 3455RC High Temperature Thermostats Elmwood Redi-Temp Series 3100 — SPST Hermetic Thermostats The Series 3455RC is a snap-action, non-adjustable precision thermostat especially suited for industrial and electrical equipment. Features
Pre-Set and Tamperproof
100% Thermally and Mechanically Inspected
Laser Welded Hermetic Seal
Operating Temperature: –80°F to +550°F
UL Listed Stock No. Mfr.’s Type 242-0016 242-0015 242-0013 242-0017 242-0014 242-0011 242-0019 242-0018 242-0012 242-0020 3100U 3100U 3100U 3100U 3100U 3100U 3100U 3100U 3100U 3100U 00031433 00031434 00031435 00031437 00031440 00031441 00031444 00031448 00031456 00031457 Features
Electrical Rating: 15A @120 VAC, 10A @ 240/277 VAC
UL Recognized, CSA Certified
Circuitry: SPST
Ceramic Base
Plated Steel Terminals
Closure and Brackets: Stainless Steel/Aluminum Applications
Computers
Medical Electronics
Power Supplies
Industrial Controls
Test Equipment Closing Reset EACH Applications
Communications
Medical
Appliances
Computers (Where High Amp Loads are Present) Closing Reset EACH ±5°F ±3°C ±5°F ±3°C 1-14 15-24 25-49 Stock No. Mfr.’s Type ±5°F ±3°C ±5°F ±3°C 1-14 15-24 25-49 60 70 80 100 130 140 170 210 80 100 16 21 27 38 54 60 77 99 27 38 40 50 60 80 110 120 150 185 60 80 4 10 16 27 43 49 66 85 16 27 39.88 39.88 39.88 39.88 39.88 39.88 39.88 39.88 39.88 39.88 36.25 36.25 36.25 36.25 36.25 36.25 36.25 36.25 36.25 36.25 31.90 31.90 31.90 31.90 31.90 31.90 31.90 31.90 31.90 31.90 242-0004 242-0003 242-0007 242-0005 242-0006 242-0009 242-0002 242-0001 242-0008 242-0010 3455RC 01000228 3455RC 01000230 3455RC 01000231 3455RC 01000232 3455RC 01000235 3455RC 01000237 3455RC 01000241 3455RC 01000242 3455RC 01000246 3455RC 01000251 145 165 175 185 215 235 295 315 130 230 63 73 79 85 102 113 146 157 54 110 115 135 145 155 185 205 265 275 100 200 46 57 63 68 85 96 129 135 38 93 28.65 28.65 28.65 28.65 28.65 28.65 28.65 28.65 28.65 28.65 26.05 26.05 26.05 26.05 26.05 26.05 26.05 26.05 26.05 26.05 22.92 22.92 22.92 22.92 22.92 22.92 22.92 22.92 22.92 22.92 Flexible Heater Sample Kits 11.00 (Reference) 1 Heaters are resistive devices that are used to heat any number of applications from airborne valves, to appliances, to satellites and medical electronics. 10.50 Top Cover (Reference) 2 3 4 5 7.30 Top Cover (Ref.) Features
11 Different Sample Shapes, Sizes and Resistances
Solder Pad Connection
Heater Resistance Values Marked Between the Solder Pads
Perforated for Easy Separation from the Main Sheet
With and Without Pressure Sensitive Adhesive on the Backside 11 8.00 (Ref.) 10 Resistance Zone Reference Kapton Sample Kit (Fig. A) Fig. A Stock No. Mfr.’s Type Pressure Sensitive Adhesive EACH 242-0021 242-0022 22000-001 22000-001A No Yes 83.34 83.34 Exposed Pads Typical 9 Silicone Sample Kit, Fiberglass Reinforced (Fig. B) Stock No. Mfr.’s Type Pressure Sensitive Adhesive EACH 242-0023 242-0024 22000-002 22000-002A No Yes 83.34 83.34 Fig. B 8 7 Zone No. Resistance ±20% (Ohms) 1 2 3 4 5 6 7 8 9 10 11 43 24 13 26 19 120 65 86 50 36 92 6 Will you need? Fans Section 7 Need Large Quantity Pricing? No Problem — Call 1-800-433-5700 Transformers Section 11 Relays Section 13 Fuses Section 14 ALLIED
939 15