3090A

METERS / SECOND 0 2.5 5.1 7.6 10.1 12.7 15.2 17.8 20.3 22.9 25.4 100 5/8 3070/3090 SERIES EXPLOSION PROOF VRS SENSORS 75 V P/P 3/4 50 25 0 100 200 300 400 500 600 700 800 900 1000 INCHES / SECOND NRTL/C FOR HAZARDOUS LOCATIONS OPTIMUM ACTUATOR: 8 DP (Module 3.17) Ferrous Metal Gear TEST CONDITION: C VRS Tech Data GENERAL SPECIFICATIONS OUTPUT VOLTAGE: 60V P-P min. OPER. TEMP. RANGE: -100 to 200F (-73 to 93C) COIL RESISTANCE: 191 to 280 OHMS INDUCTANCE: 115 mH max. POLE PIECE DIA.: .187" (4.75mm) GEAR PITCH RANGE: 12 DP (Module 2.11) or Coarser MIN. SURFACE SPEED: 15 IPS (.38 m/Sec.) Typical MAX. OPER. FREQ.: 40 KHz Typical VIBRATION: Meets Mil-Std 202F Method 204D FOR AGENCY MARKING SENSORS WITH 3/4-20 UNEF-2A MOUNTING THREAD, 120" (3M) LEADS MODEL 3070A 3070A35 FOR AGENCY MARKING THREAD LENGTH 1.8" (45 mm) 3.5" (88 mm) WEIGHT 10.5 oz. (294 gr.) 11.5 oz. (322 gr.) SENSORS WITH 5/8-18 UNF-2A MOUNTING THREAD, 120" (3M) LEADS MODEL THREAD LENGTH WEIGHT 3090A 1.8" (45 mm) 9.5 oz. (266 gr.) 3090A35 3.5" (88 mm) 10.0 oz. (280 gr.) (1) 8.5" (215 mm) 12.5 oz. (350 gr.) 3090A85 (1) Thread length includes 2" thread relief, 110" leads. WHEN PROPERLY INSTALLED USING THE EXPLOSION CONTAINMENT METHOD, ALL 3070 AND 3090 SERIES MODELS ARE CERTIFIED FOR USE IN HAZARDOUS LOCATIONS AS FOLLOWS; 3070, 3090 SERIES: CLASS 1, GROUPS ABCD, CLASS II, GROUPS EFG, CLASS III THE 3070 AND 3090 SERIES HAVE BEEN TESTED TO AND MEET THE REQUIREMENTS OF APPLICABLE U.S. AND CANADIAN SPECIFICATIONS FOR THE LOCATIONS DESCRIBED ABOVE. Invensys Sensor Systems / Electro Corporation, U.S.A. Tel. 941-355-8411 www.speed-position.invensys.com Fax 941-355-3120 ISO 9001