510E1A48F416PC

Mechanical Encoders 510 Series Datasheet 510 Series Mechanical Encoders The 510 Series are manually operated, rotary encoders that supply a 2-bit gray code output for relative reference applications or a four-bit gray code output for absolute electrical reference applications. They combine the feel of a rotary switch with a digital output. The “L” channel leads the “R” channel by 90º electrically in the clockwise position. This series has continuous electrical travel and has a rotational life of more than 100,000 shaft rotations with a positive detent feel. These small encoders are commonly used in limited-space, panel-mounted applications where the need for costly, frontpanel displays can be completely eliminated. Digital gray code outputs may eliminate the need for analog/digital converters. Key Features and Benefits Potential Applications • High resolution: Up to 36 positions for applications that INDUSTRIAL require high resolution • Audio/visual equipment Gray code digital voltage output: May eliminate the need for analog to digital converters, contributes to a more costeffective solution • Smoke detectors • Irrigation controls • Oscilloscopes Wide operating temperature range of -40 °C to 105 °C • Robotics • • [-40 °F to 221 °F]: Helps minimize thermal performance • issues MEDICAL Mounting flexibility: Horizontal or vertical mounting • EKG and defibrillation machines terminations promote flexibility in the application high resolution • Gray Code Digital Output 2 sensing.honeywell.com Mechanical Encoders Table 1. Electrical Specifications Parameter Termination B 3 Leads Termination B 5 Leads Termination C 3 Leads Termination C 5 Leads 2-bit gray code, channel L leads channel R by 90º electrically CW 4-bit gray code, absolute electrical position output 2-bit gray code, channel L leads channel R by 90º electrically CW 4-bit gray code, absolute electrical position output Termination D Characteristic Output Closed circuit resistance 2-bit gray code, channel L leads channel R by 90º electrically CW 5 Ohm max. Open circuit resistance 100 kOhm min. Contact rating 250 mA at 28 Vdc max. Switching loads: 14 Vdc 115 Vac 150 mA 1.5 mA Dielectric 1000 Vac at sea level Rotational life 100,000 cycles at rated load, typ. Electrical travel 360º/continuous Table 2. Mechanical Specifications Parameter Characteristic Termination B 2-bit Termination B 4-bit Mechanical travel Detent positions Termination C 2-bit Termination C 4-bit Termination D 16 16 360º/continuous 16 16, 24, or 361 16, 24, or 361 Operating torque 21 mN m to 23 mN m [3 in-oz to 5 in-oz] Operating speed 50 rpm, max. Termination type formed, C-30 type formed, C-30 type with mounting bracket straight, B-110 type Material: housing, bushing, shaft terminals PCB glass-reinforced thermoplastic tin-plated brass FR4 See Order Guide Tables on pp. 5-7. 1 Table 3. Environmental Specifications Parameter Characteristic Termination B 2-bit Termination B 4-bit Termination C 2-bit Termination C 4-bit Operating temperature -40 ºC to 105 ºC [-40 ºF to 221 ºF] Storage temperature -55 ºC to 120 ºC [-67 ºF to 248 ºF] Sealing Termination D Controls are not sealed for board washing. Consult Honeywell for details. sensing.honeywell.com 3 510 Series Figure 1. Output Information Incremental Output Graphs (Clockwise Rotation) 1 = 20 Position 1 G 2 G = Ground 1 2 = 21 2 3 Closed 4 Open 5 6 7 8 9 10 11 12 13 14 2-bit, 15 16 detent 16 17 18 19 20 21 22 2-bit, 23 24 detent 24 25 26 27 28 29 30 31 32 33 34 2-bit, 35 36 detent 36 Channel Graph 1 R 0 1 Position 1 4 2 G 8 1 = 20 4 = 22 1 2 2 = 21 3 G = Ground 4 8 = 23 5 Closed 6 Open 7 8 9 10 11 12 13 14 15 4-bit, 16 16 detent L 0 CW ¼ Cycle per detent 510 Series Mechanical Encoder Product Nomenclature Figure 2. Nomenclature Tree For example, 5101A48F204PB defines a 510 Series Mechanical Encoder, anti-rotation locating pin at the 9 o’ clock position, 3/8-32 UNEF-2A, 9,53 mm [0.25 in] bushing type and length, 19,05 mm [0.750 in] shaft length, flatted shaft, 2-bit: 4 cycles per revolution, 16 detents per revolution, PC type B-110 termination. 510 Series 510 Series Mechanical Encoder A 48 Bushing Type and Length Shaft Length (From Mounting Surface) 1 Anti-Rotation Locating Pin 1 at 9 o’ clock A 3/8-32 UNEF-2A 6,35 mm [0.25 in] 48 19,05 mm [0.750 in] F 204P B Shaft Type Bits, Cycles, and Mechanical Detents per Revolution (Gray Code Options) Termination Type 1 Flatted PC type B-110 2-bit: 4 cycles per revolution, B (straight for horizontal mount) 2-bit: 6 cycles per revolution, C PC type C-30 204P 16 detents per revolution 206P 24 detents per revolution 2-bit: 9 cycles per revolution, 209P 36 detents per revolution (bent for vertical mount) PC type C-30 D (bent for vertical mount) with mounting bracket 416P 4-bit: 16 cycles per revolution, 16 detents per revolution 4 sensing.honeywell.com 005965-1-EN Mechanical Encoders Table 510-A Order Guide Electrical Mechanical Number of Bits Detent Positions 510E1A48F204PB 2 510E1A48F206PB 510E1A48F209PB Catalog Listing RoHS Compliant Mounting Hardware 16 yes none 2 24 yes none 2 36 yes none Dimensional Drawing (For reference only: mm [in].) Shown with shaft in position 1 21,08 [0.830] 8,13 [0.320] 19,1 [0.752] 8,71 [0.343] 6,35 [0.250] 9,53 [0.375] ø6,27 [0.247] 21,08 [0.830] 5,54 [0.218] 15,62 [0.615] 3/8-32 UNEF-2A Mounting surface 90° 6,35 [0.250] 2X 2,54 [0.100] Table 510-B Order Guide Catalog Listing 510E1A48F416PB Electrical Mechanical Number of Bits Detent Positions 4 16 RoHS Compliant Mounting Hardware yes none Dimensional Drawing (For reference only: mm [in].) Shown with shaft in position 1 21,08 [0.830] 8,13 [0.320] 19,1 [0.752] ø6,27 [0.247] 8,71 [0.343] 6,35 [0.250] 9,53 [0.375] 21,08 [0.830] 5,54 [0.218] 15,62 [0.615] 3/8-32 UNEF-2A Mounting surface 90° 8,13 [0.320] 2X 2,54 [0.100] sensing.honeywell.com 5 510 Series Table 510-C Order Guide Electrical Mechanical Number of Bits Detent Positions 510E1A48F204PC 2 510E1A48F206PC 510E1A48F209PC Catalog Listing RoHS Compliant Mounting Hardware 16 yes none 2 24 yes none 2 36 yes none Dimensional Drawing (For reference only: mm [in].) Shown with shaft in position 1 19,1 [0.752] 6,35 [0.250] 21,08 [0.830] 8,1 [0.32] ø6,27 8,71 [0.343] 9,53 [0.375] [0.247] 21,08 [0.830] 90° 5,54 [0.218] 3/8-32 UNEF-2A Mounting surface 15,62 [0.615] 3,97, Typ. [0.156] 2X 2,54 [0.100] Table 510-D Order Guide Catalog Listing 510E1A48F416PC Electrical Mechanical Number of Bits Detent Positions 4 16 RoHS Compliant Mounting Hardware yes none Dimensional Drawing (For reference only: mm [in].) Shown with shaft in position 1 21,08 [0.830] 8,13 [0.320] 19,1 [0.752] 6,35 [0.250] ø6,27 [0.247] 8,71 [0.343] 9,53 [0.375] 21,08 [0.830] 5,54 [0.218] 90° 3/8-32 UNEF-2A Mounting surface 3,97 [0.156] 15,62 [0.615] 2X 2,54 [0.100] 6 sensing.honeywell.com Mechanical Encoders Table 510-E Order Guide Catalog Listing 510E1A48F209PC Electrical Mechanical Number of Bits Detent Positions 2 36 RoHS Compliant Mounting Hardware yes mounting bracket Dimensional Drawing (For reference only: mm [in].) Shown with shaft in position 1 21,08 [0.830] 8,13 [0.320] 18,59 [0.732] ø6,27 5,84 [0.230] 9,22 [0.363] 3.73 [0.147] [0.247] 21,08 [0.830] 15,32 [0.603] 5,54 [0.218] 90° 3/8-32 UNEF-2A Mounting surface 15,62 [0.615] 15,88 [0.625] 2X 2,54 [0.100] Figure 3. 510BKT Mounting Bracket (available separately) sensing.honeywell.com 7 ADDITIONAL INFORMATION The following associated literature is available at sensing.honeywell.com: • Product Range Guide • Product Line Guide • Installation Instructions WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION • • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell’s Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. sensing and control products, call +1-815-235-6847 or 1-800-537-6945, visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell.com Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 honeywell.com 32301267-A-EN IL50 October 2014 © 2014 Honeywell International Inc. All rights reserved.