575SX1A48S103SS

575SX1A48S103SS 575 Series Commercial Potentiometer, Conductive Plastic Element, Solder Hook Terminals, 0.5 W Power Rating, 10 kOhm Resistance Value Representative photograph, actual product appearance may vary. Features ● ● ● Due to regional agency approval requirements, some products may not be available in your area. Please contact your regional Honeywell office regarding your product of choice. ● All plastic construction Conductive plastic element Linear taper Solder hook terminals Typical Applications ● ● ● Manual controls (throttle, joystick) Welding and heating Telecommunications Description The 575 Series is a low cost potentiometer with the benefits of a conductive plastic element. It is panel mounted and the housing and shaft are made from thermoplastic material. 575SX1A48S103SS 575 Series Commercial Potentiometer, Conductive Plastic Element, Solder Hook Terminals, 0.5 W Power Rating, 10 kOhm Resistance Value Product Specifications Potentiometer Type Commercial Element Type Conductive Plastic Terminal Type Solder Hook Power Rating 0.5 W Resistance Value 10 kOhm Resistance Tolerance ± 20 % Linearity ±5% Bushing Thread 9,53 mm [0.375 in] x 32 NEF-2A Bushing length 6,35 mm [0.25 in] Bushing Type Standard Shaft Diameter 6,35 mm [0.25 in] Shaft length 19,05 mm [0.75 in] Shaft Ending Slotted Body Electrical Taper 21.08 mm [0.83 in] square, ± 0.79 mm [0.031 in], except at terminal standoff Linear Operating Temperature -40 °C to 120 °C [-40 °F to 248 °F] Working Voltage (Max.) 350 V Rotational Life 50000 cycles Mechanical Rotation 300° Availability Global Series Name 575 Series UNSPSC Code 4111363300 UNSPSC Commodity 4111363300 Potentiometers 575SX1A48S103SS 575 Series Commercial Potentiometer, Conductive Plastic Element, Solder Hook Terminals, 0.5 W Power Rating, 10 kOhm Resistance Value 575SX1A48S103SS 575 Series Commercial Potentiometer, Conductive Plastic Element, Solder Hook Terminals, 0.5 W Power Rating, 10 kOhm Resistance Value PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. MISUSE OF DOCUMENTATION ● ● The information presented in this product sheet (or catalog) is for reference only. DO NOT USE this document as product installation information. Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. © Copyright Honeywell Inc.1998-2004 All rights reserved.