584XX Series
Digital Magnetic Speed Sensors
DESCRIPTION
Honeywell’s 584XX Series Digital Magnetic Speed Sensors
Because the digital signal conditioning is done internally,
combine active electronics with features of Variable
interface circuitry is no longer required. This circuit changes
Reluctance Sensors in a single package. The 584XX Series
the waveform generated by the sensor coil into a digital
produce constant amplitude output signals suitable for direct
square-wave output.
use in many digital and logic control applications.
FEATURES AND BENEFITS
Senses moving ferrous metal
Output signal of integrated circuit allows for direct use in
digital equipment
• Minimizes the need for interface circuitry, reducing
installation and maintenance costs
• Enhanced stability due to precisely-matched components
• Extremely precise relationship between the physical
position of any sensed object and the electrical signal
produced provides improved accuracy to timing and
positioning applications
• Enhanced sensitivity with the capability to produce full
output of +5 to 30 V at speeds as low as 3 in per second
at gaps of .050 in, or 1 in per second at gaps of .005 in.
Constant output amplitude independent of speed, and air
gap (within sensing range), allows for full output at almost
zero speeds.
• Excellent resistance to water, oil, shock and vibration
damage extend product life and operating reliability
• Wide variety of supply voltages allow application flexibility
• Allows for the reduction in noise, often vital in potential
positioning and synchronization applications
• Pre-leaded or connector versions allow application
flexibility
• Standard thread sizes improve compatibility and
interchangeability with other standard types of speed
sensors
•
•
POTENTIAL APPLICATIONS
Industrial:
• Computing
• High-speed counting
• Positioning
• Tachometry
• Synchronization
• Routing
• Flow metering
• Machine control
Transportation:
• Engine, motor, or pump RPM sensing
• Over/under speed sensing
• Wheel speed detection
584XX Series
5/8 584XXHV HIGH VOLTAGE OPERATING CHARACTERISTICS
Characteristic
Measure
Supply voltage
10 Vdc to 30 Vdc @ 15 mA max. High Voltage (HV)
Operating temperature range
-40 °C to 107 °C [-40 °F to 225 °F]
Low: 350 mV max. @ 20 mA maximum current sink
High: RL x Vs
Output signal: square wave
RL + 2.2K
RL = load resistance in K ohms; Vs = supply voltage in Vdc
Vibration
Meets MIL-STD 202F, method 204D
Housing material
300 Stainless Steel
584XXHV PHYSICAL CHARACTERISTICS
Sensors with 5/8-18 UNF-2A mounting thread, MS3106 connector, 10 kHz typical frequency response
Model
Thread length
Overall length
Weight
58426HV
45 mm [1.8 in]
76 mm [3.0 in]
85 g [3.0 oz]
58426HVA30
76 mm [3.0 in]
104 mm [4.1 in]
142 g [5.0 oz]
Mates with 41009(VR) connector or CA310 cable assembly
Sensors with 5/8-18 UNF-2A mounting thread, AWG 22 PVC shielded cable (1,65 m [65 in] long), 10 kHz typical frequency
response
Model
Thread length
Overall length
Weight
58424HV
45 mm [1.8 in]
63 mm [2.5 in]
85 g [3.0 oz]
2
www.honeywell.com/sensing
Digital Magnetic Speed Sensors
1/4, 3/8, 5/8 584XXLV LOW VOLTAGE OPERATING CHARACTERISTICS
Characteristic
Measure
Supply voltage
5 Vdc to 15 Vdc @ 15 mA max. Low Voltage (LV)
Operating temperature range
-40 °C to 107 °C [-40 °F to 225 °F]
Low: 350 mV max. @ 20 mA maximum current sink
High: RL x Vs
Output signal: square wave
RL + 2.2K
RL = load resistance in K ohms; Vs = supply voltage in Vdc
Vibration
Meets MIL-STD 202F, method 204D
Housing material
400 Stainless Steel
584XXLV PHYSICAL CHARACTERISTICS
Sensors with 5/8-18 UNF-2A mounting thread, MS3106 connector, 10 kHz typical frequency response
Model
Thread length
Overall length
Weight
58426LV
45 mm [1.8 in]
76 mm [3.0 in]
85 g [3.0 oz]
58426LVA30
76 mm [3.0 in]
104 mm [4.1 in]
142 g [5.0 oz]
Mates with 41009(VR) connector or CA310 cable assembly
Sensors with 5/8-18 UNF-2A mounting thread, AWG 22 PVC shielded cable (1,65 m [65 in] long), 10 kHz typical frequency
response
Model
Thread length
Overall length
Weight
58424LV
45 mm [1.8 in]
63 mm [2.5 in]
85 g [3.0 oz]
Sensors with 3/8-24 UNF-2A mounting thread, AWG 26 teflon leads (2 m [79 in] long), 50 kHz typical frequency response
Model
Thread length
Overall length
Weight
58423LV
25 mm [1.0 in]
38 mm [1.7 in]
85 g [3.0 oz]
Honeywell Sensing and Control
3
WARNING
WARNING
PERSONAL INJURY
MISUSE OF DOCUMENTATION
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
•
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s
standard product warranty applies unless agreed to otherwise
by Honeywell in writing; please refer to your order
acknowledgement or consult your local sales office for specific
warranty details. If warranted goods are returned to Honeywell
during the period of coverage, Honeywell will repair or replace,
at its option, without charge those items it finds defective. The
foregoing is buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special,
or indirect damages.
The information presented in this product sheet is for
reference only. DO NOT USE this document as product
installation information.
• Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
SALES AND SERVICE
Honeywell serves its customers through a worldwide network
of sales offices, representatives and distributors. For
application assistance, current specifications, pricing or name
of the nearest Authorized Distributor, contact your local sales
office or:
E-mail: info.sc@honeywell.com
Internet: www.honeywell.com/sensing
Phone and Fax:
While we provide application assistance personally, through
our literature and the Honeywell web site, it is up to the
customer to determine the suitability of the product in the
application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this
printing. However, we assume no responsibility for its use.
Asia Pacific
+65 6355-2828
+65 6445-3033 Fax
Europe
+44 (0) 1698 481481
+44 (0) 1698 481676 Fax
Latin America +1-305-805-8188
+1-305-883-8257 Fax
USA/Canada +1-800-537-6945
+1-815-235-6847
+1-815-235-6545 Fax
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
www.honeywell.com
005907-2-EN IL50 GLO Printed in USA
May 2009
© 2009 Honeywell International Inc.
很抱歉,暂时无法提供与“58426LVA30”相匹配的价格&库存,您可以联系我们找货
免费人工找货