70839

CTX-95 Description The Gamewell-FCI City Tie Expander (CTX-95) is a singlecircuit, reverse-polarity transmitter that provides the interface between the Fire Alarm Control Panel (FACP) and a municipal system or central station. The CTX-95 connects to the panel via a three-wire SLC circuit. The most common usage is transmitting supervisory signals and their faults on a separate city tie from the main system, and to transmit alarms to a central station to indicate building alarm or arrival entrance to building. The CTX-95 is either surface or flush mounted and has an integral LED that lights at device activation. City Tie Expander g2282ph1.jpg Operation The CTX-95 is a programmable reverse polarity city tie circuit. The module contains the XP-95 protocol to communicate with the Gamewell-FCI 600 Series of analog addressable control panels. The module provides the power and supervision for the reverse polarity city tie. Programming CTX-95 selected circuits insures that only their alarms and troubles are transmitted to the central station. CTX-95 CTX-95 Features • • • • • Compatible with all Gamewell-FCI 600 Series analog addressable FACPs. Connects to addressable SLC. Provides one reverse polarity circuit. Over-voltage protector built-in. LED annunciates activation. Fully supervised. Surface or flush mounting. Field programmable. Style 4, 6, or 7 wiring. Programming The CTX-95 is programmed by setting a single DIP switch easily accessible on the device’s printed circuit board. The DIP switch is used to set the address of the CTX-95. All other programming is accomplished at the Fire Alarm Control Panel, either through a laptop computer or through the Control Panel Operator’s Display. • • • • • Screw terminals for field-wiring connections. Mounting The CTX-95 mounts in a standard 4.688" (11.908 cm) electrical backbox. The CTX-95 should be mounted in an easily accessible location so that the LED may be seen for quick indication of proper connection and activation. An ISO 9000-2000 Company SIGNALING Microsoft® Windows® is a registered trademark of Microsoft® Corporation. S521 7300-1288:147 GAMEWELL-FCI Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. ©2007 Honeywell International Inc. All rights reserved. www.gamewell-fci.com CS-2042 Rev. A page 1 of 2 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 CS-2042ph2.wmf Engineer’s Specifications The contractor shall furnish and install an electronic addressable reverse polarity transmitter. It shall connect to the FACP via a three-wire SLC circuit. It shall be fully programmable and supervised with a LED to indicate activation. It shall be Gamewell-FCI CTX-95. Ordering Information Model CTX-95 Description City tie expander provides one reverse polarity city connection for addressable loop. XP95 protocol compatible. Trim ring for flush-mounting CTX-95. 70839 Specifications Input Power: Quiescent Current: Alarm Current: Operating Temperature: Relative Humidity: Housing Requirements: Output Rating: 24 VDC from three-wire analog circuit. 0.002 A 0.02 A 0° C to 49° C (32° F to 120° F) 85% non-condensing 4.6888” (11.908 cm) backbox 0.015 A maximum GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 www.gamewell-fci.com CS-2042 Rev. A page 2 of 2