Turn Signals
Line Guide
Expert Construction. Tailored Solutions. Honeywell Sensing
and Control (S&C) turn signal switches are built to perfectly
complement our line of industry-leading shifters, or can be
mounted as independent units. A wide variety of operations are
available — from wiper speeds, headlamp controls and buttons
to auto-cancel options. And each mechanism is built to withstand
harsh environments.
FEATURES
TURN SIGNALS
Standard and Custom Designed.
Features: Broad product line • Designed
for rugged environment • Sealed against
elements (IP67 rating) • Vast array of
optional features • Cycle life up to one
million cycles • Capable of switching
solenoid loads (with arc suppression: 2 A
@ 12.8 Vdc)
Benefits: Innovative designs provide
economical solutions. Turn signal control
levers have multi-function capability.
Potential applications include agricultural
equipment (utility tractors, loaders),
construction (telehandlers, loader/
backhoes, forklifts) and material handling
equipment, on-highway vehicles (trucks,
refuse trucks), off-highway trucks,
motor coaches, airport ground support
equipment (tugs, de-icers).
But the best part is Honeywell S&C’s unrivaled design experience.
Which means we can expertly craft customized turn signal
solutions to meet any of your exacting specifications. So whether
it’s a standard product or a customized solution, Honeywell S&C’s
tradition of quality and innovation is infused throughout every turn
signal shipped.
Turn Signals Line Guide
Turn to the industry leader.
From cars to trucks to motor
coaches to construction
equipment, Honeywell S&C
turn signals are often ideal for
wiper speed and head lamp
controls in most any on- or offhighway applications. Whether
it’s a customized solution or
an out-of-the-box design,
Honeywell S&C not only
offers up the quality, but the
amenities you’d expect from
the manufacturing leader.
All products are tested for
shock, vibration, mechanical,
electrical, environmental,
durability, and performance
specifications.
Turn Signals
Turn signals are built to complement the shifter, or can also be
mounted as stand alone. Specifications/ratings include:
Column size
38 mm, 45 mm, 55 mm
Wiper speeds
1 speed, hi/lo, intermittent
Lights
turn signal, head lamp switch, head lamp dimmer, flash to pass, hazard warning
Buttons
wash, horn
Connectors
integral packard, integral deutsch, wire harness
Auto cancel
available
Operating temperature
range
-40 °C to 85 °C [-40 °F to 185 °F] (0 % to 95 % relative humidity)
Operating voltage range
3 V to 32 V
Handle dead weight limit
160 lbs [712 Newtons]
Solenoid load
2 A @ 12.8 Vdc (with arc suppression)
Warranty. Honeywell warrants goods of
its manufacture as being free of defective
materials and faulty workmanship.
Honeywell’s standard product warranty
applies unless agreed to otherwise by
Honeywell in writing; please refer to your
order acknowledgement or consult your
local sales office for specific warranty
details. If warranted goods are returned to
Honeywell during the period of coverage,
Honeywell will repair or replace, at its
option, without charge those items it finds
defective. The foregoing is buyer’s sole
remedy and is in lieu of all warranties,
expressed or implied, including those
of merchantability and fitness for a
particular purpose. In no event shall
Honeywell be liable for consequential,
special, or indirect damages.
While we provide application assistance
personally, through our literature and
the Honeywell web site, it is up to the
customer to determine the suitability of the
product in the application.
Specifications may change without notice.
The information we supply is believed to
be accurate and reliable as of this printing.
However, we assume no responsibility for
its use.
For more information about Sensing and
Control products, visit www.honeywell.
com/sensing or call +1-217-753-7752
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
• DO NOT USE these products as
safety or emergency stop devices
or in any other application where
failure of the product could result in
personal injury.
Failure to comply with these
instructions could result in death or
serious injury.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this
catalogue is for reference only. DO
NOT USE this document as product
installation information.
• Complete installation, operation and
maintenance information is provided
in the instructions supplied with each
product.
Failure to comply with these
instructions could result in death or
serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-217-753-7752
www.honeywell.com/sensing
0095781-EN IL50 GLO
July 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
