Switches and Custom Controls
SENSING AND CONTROL
Product Catalog
! WARNING
IMPROPER INSTALLAION
• Consult with local safety agencies and their requirements
when designing a machine-control link, interface and all
control elements that affect safety.
• Strictly adhere to all installation instructions.
Failure to comply with these instructions could result in
death or serious injury.
! WARNING
PERSONAL INJURY
• DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
! WARNING
MISUSE OF DOCUMENTATION
• The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
• Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
CONTENTS
Introduction - How to use this catalogue ..................................................... Page 2
Industrial Electromechanical Limit Switches ................................................ Page 5
Selection Guide .............................................................. Page 6
Limit Switch Application Information .................................... Page 8
Global Limit Switches .................................................... Page 10
Compact Limit Switches ................................................. Page 21
Precision Limit Switches ................................................. Page 34
Heavy Duty Limit Switches ............................................... Page 46
Hazardous Location Switches ........................................... Page 57
Levers for Limit Switches ................................................ Page 71
Power Relays .................................................................................... Page 74
Electromechanical Safety Switches .......................................................... Page 79
Selection Guide ............................................................ Page 80
Basic Switches ................................................................................. Page 103
Pressure Switches ............................................................................. Page 113
Environment Sealed, Hermetically Sealed and Manual Switches .................... Page 119
Sealed Switches .......................................................... Page 119
Manual Switches ......................................................... Page 139
Manual Switches and Pushbuttons ........................................................ Page 165
Selection Guide ........................................................... Page 166
AML Series Advanced Manual Line Switches ........................ Page 168
MML Series Miniature Manual LIne Switches ....................... Page 171
Custom Switches and Assemblies .......................................................... Page 173
Vehicle Controls ............................................................................... Page 175
Custom Controls ........................................................... Page
Hour Meters ................................................................ Page
Key Switches .............................................................. Page
Push/Pull Switches ....................................................... Page
Shifters ..................................................................... Page
Proportional Retarders ................................................... Page
Turn Signals ............................................................... Page
Lighting Products ......................................................... Page
Other Vehicle Controls ................................................... Page
175
176
184
185
186
187
188
189
194
Precision Aerospace .......................................................................... Page 195
Sensing and Control Product Overview .................................................... Page 196
New Technologies and Emerging Capabilities ........................................... Page 198
Index ............................................................................................ Page 199
Sales and Service ............................................................................. Page 210
www.honeywell.com/sensing
1
INTRODUCTION
HONEYWELL SWITCHES AND CONTROLS
Honeywell switches and controls provide a wide selection of solutions.
This catalogue contains our most popular offerings. To view our
complete range of products, visit our web site at
http://www.honeywell.com/sensing.
Honeywell is a worldwide leader in advanced switching and sensing
technology. Our reputation for technology, quality and reliability is
second to none. We have more than 60 years of experience; and
extensive knowledge of a wide range of industries and an extensive
customer service and support network.
Honeywell manufactures the original MICRO SWITCH brand switches:
micro switches, toggle and rocker switches, hermetically and
environmentally sealed switches, and relays and limit switches. Honeywell
switches are aimed at providing an enhanced level of performance and
quality.
vehicular lighting, shifters, pressure and vacuum switches, and custom
product development and rapid prototyping technology.
Honeywell’s aerospace switches and controls are designed for the most
stringent industry requirements. The portfolio consists of position, force,
torque and pressure sensors, indicators and actuators. In addition to
our standard product offering, Honeywell offers repair and overall
services for highly engineered aerospace controls.
Honeywell continues to strive to solve customers’ needs. Whether you
need custom solutions or standard off-the-shelf products, our extensive
in-house design, manufacturing and environmental testing capabilities
offer solutions and alternatives to meet your needs.
Honeywell HOBBS brand is well known worldwide for the development of
quality electromechanical products. The HOBBS brand includes hour
meters and battery discharge indicators, key switches, off-highway
2
www.honeywell.com/sensing
INTRODUCTION
How to use this catalogue
For each referenced listing, key specification parameters, descriptions
and mounting drawing information are presented. These illustrate our
capabilities while the specifications allow easy differentiation between
similar products.
There are, of course, many more product options available. Full product
specification may be accessed on our website (www.honeywell.com/
sensing). At the Home page enter the catalog listing in the SEARCH box
and click GO! This will take you directly to the interactive catalogue/
specification search tables for this listing. Alternatively select and click the
interactive catalogue icon on the Home page and then choose a product
category against which to do a specification search.
Also on the website you can access installation instructions, application
notes, Frequently Asked Questions (FAQs), selection guides and
additional technical information.
Mounting dimensions
Mounting dimensions shown in each product section are for reference
only. For exact information, request an engineering drawing from your
nearest Honeywell sales office or visit our website and access it through
the interactive catalogue. Where dual dimensions are shown on
mounting drawings, the first or upper one is millimetres (mm) and the
second or lower is inches (in). Where single dimensions are shown,
they are millimetres (mm), unless otherwise stated.
To order these products
Simply contact your local Honeywell Sales Representative, your
Honeywell Distributor or your local Honeywell office.
If you need a product not listed in this catalogue
One of Honeywell’s strengths is in packaging of sensing technology to
meet customer needs. Honeywell provides many variations of our basic
switches and sensors. For more information, either browse the full
interactive catalogue available on our website, or telephone the following
numbers:
USA
1-800-537-6945/1-815-537-6945
UK
+44 (0)1698 481 481 Germany +49 69 8064 444
France +33 1 60 19 80 40
Italy
+39 02 92146 450/456
More information on Honeywell Sensing & Control products and how to
contact us can be found on our website.
Select the right product – select the right supplier
Delivering excellence in system critical sensing
solutions
A system is critical if the quality, reliability, delivery and customer service
associated with a component part is essential to the performance of the
operation or end product. If a sensor or a switch is critical to the
performance, cost effectiveness, delivery or safety of a product or
operation then it’s system critical. It is therefore a defining element in the
performance of the system under whatever conditions apply. Failure of
the component - or failure of delivery of the component - results in lost
productivity, increased costs or a catastrophic event such as a
shutdown. Therefore selecting the right product is essential. It can
make the difference between success and failure.
Honeywell Sensing and Control – delivering excellence
To select the right product, first select the right supplier. To deliver the right
products for our customers’ needs we listen to them to understand their
needs. Using techniques such as “Voice of the Customer and “Concept
Engineering” we make sure that the products and solutions we deliver are the
right ones. As part of Honeywell we can use local knowledge and
understanding combined with global expertise and resources to achieve this.
We can deploy many key technologies to bring innovative solutions to
customers’ problems.
Our products are manufactured to work well and to last. We use Six Sigma
Plus productivity to ensure this is the case. We have award winning
manufacturing facilities around the world and recognised world class
business excellence in manufacturing and supply chain management to
deliver on time, anywhere in the world.
Our e-business approach offers instant access to product information,
technical support and application knowledge through out Internet site.
Check out our powerful interactive catalogue that can search and find the
right products for customers’ needs and deliver a drawing ready for
incorporation in a CAD system direct to your desk.
And of course, we manage our whole business for the benefit of our
customers, using an acknowledged world-class business excellence
approach that incorporates Six Sigma principles.
Expanded Product Lines
As well as many new and innovative switches, this catalogue includes an
expanded range of Pressure and Position Sensors, previously known
under the Clarostat, NEI and Electrocorporation brand names.
www.honeywell.com/sensing
3
4
www.honeywell.com/sensing
LIMIT SWITCHES
Industrial Electromechanical
Limit Switches
Honeywell offers an advanced line of heavy duty limit switches and a wide
selection of application-proven enclosed switches (precision snap-acting
switches sealed in rugged metal housing). Sealed versions keep out
moisture and other contaminants. Our products meet or exceed critical
standards allowing for global use. Our rugged switches are suitable for use
in harsh-duty, wash-down environments. We offer a variety of circuitry,
terminations and actuators to ensure that you can match your choice of
switch to your application.
Limit and enclosed switches are the cost effective switches of choice for
detecting objects which can be touched. When an object comes in contact
with an actuator, the switch operates. Rugged and dependable, these
switches are offered in a variety of sizes, with different seals, enclosures,
actuation, circuitries and electrical ratings. Enclosed switches are known
for enhanced precision and low cost. Limit Switches are especially
rugged and well sealed. Explosion proof switches are designed for use
in hazardous locations.
The Honeywell switches featured here are all proven in a broad range of
potential Industrial applications - machine tools, packaging machinery,
lifting gear, presses and construction machinery.
More information about our complete product range - and the depth of
product available within each product line - can be found on our interactive
catalogue at www.honeywell.com/sensing.
MICRO SWITCH Brand products
Honeywell has been at the forefront of switching technology since we were
the first to develop the precision snap-action switch more than 60 years ago.
Ever since we introduced the Micro Switch Brand Products in 1937, we have
been recognized as the performance standard that all other switches are
measured against. We continue in that tradition by constantly improving the
technology, cost-effectiveness, and delivery of these hardworking, versatile
electromechanical switches.
!
WARNING
IF USED IN APPLICATIONS CONCERNING HUMAN SAFETY
• Only use NC direct opening (“positive opening”/ “positive
break”) contacts, identified by the symbol .
• Do NOT use flexible / adjustable actuators. Only use
actuators designed for safety applications.
• Do NOT defeat, tamper, remove, or bypass this switch.
• Hazardous voltage, disconnect power before servicing.
• Strictly adhere to all installation and maintenance
instructions.
• Consult with local safety agencies and their requirements
when designing a machine-control link, interface and all
control elements that affect safety.
Failure to comply with these instructions could result in
death or serious injury.
www.honeywell.com/sensing
5
LIMIT SWITCHES
Selection Guide
for Limit Switches
Sealing
62,0 x 30,5 x 31,0
[2.44 x 1.20 x 1.22]
66, 67
1, 12, 13
95,3 x 28,7 x 22,0
[3.75 x 1.13 x 0.87]
64
–
96,0 x 28,0 x 39,0
[3.8 x 1.10 x 1.51]
67
1, 4, 12, 13
102,9 x 42,0 x 42,0
[4.05 x 1.65 x 1.65]
AC15 A600
(A300 DPDT)
DC13
66
GLC/E
1, 4, 12, 13
GLD
1, 2, 12
77,0 x 30,0 x 30,5
[3.03 x 1.18 x 1.20]
AC15 A600
Plastic,
A300 Metal
Housing
DC13
67
3, 4, 13
28.4 x 44.2 x 18,0
[1.12 x 1.74 x 0.71]
5 A - 125, 250 Vac
66, 67, 68
1, 2, 3, 3R, 4, 6,
6P, 12 (boot
seal), 13
44,0 x 40,0 x 16,0
[1.73 x 1.57 x 0.63]
5 A - 125, 250 Vac
49,0 x 40,0 x 16,0
[1.93 x 1.57 x 0.63]
10 A - 250 Vac
CCC
1, 12, 13
UL
65
GLOBAL
CSA
Height x Width x Depth
mm
[in]
Metal
CE
NEMA
(USA)
Plastic
C-UL
IEC
IP
GLL
Electrical Rating
EVN2000
Dimensions
EN50041
(GLA)
Approvals
EN50047
(GLC/D/E)
Housing Material
DC
AC
Series
EVN2000
GLC
GL
Global
SZL-VL
SZL-VL
SL1
GLD
914CE
Compact
66 (standard),
67 (boot seal)
1, 3, 4, 6, 13
(½ in conduit)
94,0 x 40,6 x 58,42
[3.7 x 1.6 x 2.3]
10 A - 120, 240, 480 Vac
BF
67
1, 3, 4, 13
44,5 x 73,5 x 30,2
[1.75 x 2.9 x 1.19]
11 A - 125 Vac,
5 A - 125 Vac
BZE/DTE
–
1 (E6)
1, 3 (V6)
44,4 x 77,2 x 25,4
[1.75 x 3.04 x 1.0]
1 A - 125 Vac,
15 A - 125 Vac
E7
50 (standard),
65 (boot seal)
–
45,2 x 76,4 x 25,4
[1.67 x 3.0 x 1.0]
1 A - 125 Vac,
15 A - 125 Vac
BAF/DTF
–
1, 3, 4, 13;
1 (-2RQ9)
54,8 x 101,6 x 33,0
[2.16 x 4.0 x 1.3]
10 A - 125 Vac,
20 A - 125 Vac
HDLS
–
1, 3, 4, 4X, 6, 6P,
12, 13
HDLS
Fully potted
–
1, 4, 6, 6P, 12, 13
(connector)
1, 4, 6, 6P, 12
(cable)
–
1, 3, 3R, 4, 4X, 6,
6P, 12, 13
123,0 x 47,7 x 61,9
[4.9 x 1.9 x 2.4]
14CE100
65 (standard),
67 (boot seal)
1, 3 (standard),
1, 3, 4, 12, 13
(boot seal)
49,0 x 40,0 x 16.0
[1.93 x 1.57 x 0.63]
AC14 D300,
DC13 R300
66/67
–
60,0 x 52,0 x 25,0
[2,36 x 2.05 x 1.0]
AC15,
DC13
–
1, 7, 9
65,0 x 93,0 x 52,0
[2.56 x 3.66 x 2.0]
Up to 20 A @
125, 250 or 480 Vac
–
1, 3, 4, 4X, 6, 6P,
7, 9, 13
102,0 x 102,0 x 145,0
[4.0 x 4.0 x 5.71]
Up to 20 A @
125, 250 or 480 Vac
–
1, 3, 4, 6, 7, 9, 13
121,0 x 76,0 x 73,0
[[4.8 x 3.0 x 3.0]
SPDT (NEMA A600),
DPDT (NEMA B600)
LS
67
(20 mm
conduit)
GXE
BZE/
DTE
E7
GXE
HDLS
Stainless
steel
14CE100
Heavy Duty
HAZARDOUS LOCATION
BX
CX
Hazardous Location
EX
(-L) (-L)
Stainless
Steel
67
LSX/BX
6
5 A Resistive - 0.4 A Resistive
125, 250 Vac
125 Vdc
EX
Precision
BAF/
DTF
DC13, Q300
CX
BF
–
AC15, A300
LSX
924CE
PRECISION
24CE
GLE
GLA
Thermoplastic/
Metal
14CE
GLA
Die cast base/
Plastic cover
10 A Thermal, 10 A Thermal,
300 Vac
250 Vdc
www.honeywell.com/sensing
1, 3, 4, 6, 7, 9, 13
SDPT:
106,7 x 41,1 x 62,0
[4.2 x 1.6 x 2.4]
DPDT:
119,1 x 47,8 x 62,0
[4.7 x 1.9 x 2.4]
10 A Thermal:
SPDT (NEMA A600),
DPDT (NEMA B600)
LIMIT SWITCHES
Switching Options*
Operating Temperature
Termination
Special Features
Slow Action
To
°C
[°F]
Snap Action
1NC/ 2NC/ 1NC/ 2NC/
1NC
1NO 2NO 1NO 2NO
-10
[14]
80
[176]
-25
[-13]
85
[185]
-20
[-4]
60
[140]
-25
[-13]
85
[185]
2NC
Make
Before
Break
Break Before Make
1NC/
1NO
1NC/ 2NC/ 2NC/ 3NC/
4NC
1NO 1NO 2NO 1NO
Gold
Contacts
(Low
Energy
Options)
Page Number
From
Lowest cost
switch option
20
Cable gland/
cord grip
Insulation Displacement
Termination
10
Flexible cable
gland/cord grip
Gold plated silver
contacts standard
11
Conduit
Wide variety of actuator
styles and circuitry
options
Conduit
COMPACT
SL1
14
14/914CE
-40
[-40]
85
[185]
-10
[-14]
70
[160]
0
[32];
low temp
option to
-30°
70
[221]
0
[32]
70
[221]
-29
[-20]
71
[160]
Conduit
-32
[-25]
71
[160]
Conduit
Cost effective solution
34
-32
[-25]
71
[160]
Conduit
Precise operation.
Low temperature
versions available
36
-30
[-22]
70
[158]
Conduit
Precise operation
41
-32
[-25]
71
[160]
Conduit
Rugged housed precise
operation
42
46
105
[221]
16
Cord grip
Miniature size
21
Cable,
Quick Connect
Low and high
temperature options
available.
Superior Sealing (IP 68)
23
Cable,
Quick Connect
Low and high
temperature options
available.
Direct acting contacts
26
24/924CE
29
-12 [-10];
-40 [-40]
121
[250]**
Conduit
Low temperature and
Fluorocarbon Seal
versions available.
Wide variety of actuator
styles.
Cable and connector
available.
-12
[-10]
Connector
121 [250];
Cable
version
105 [221]
Cable or
Connector
Switch cavity is epoxy
filled
53
HEAVY DUTY
HDLS
-12 [-10]
-40 [-40]
121
[250]**
Conduit, Cable
Corrosion resistant
stainless steel housing
55
0
[32]
70
[158]
Preleaded
cable
Miniature size
58
-20
[-4]
75
[167]
Preleaded
cable
-40
[-40]
71
[160]
Conduit
High temperature option
(400 °F for 100 Hr)
60
85
[185]
Conduit
Optional 4-20 mA
analog output
64
Conduit
Wide variety of
actuators, circuitry and
termination options
66
Conduit
ATEX approvals for
European use
66
See Catalog
for details
See Catalog See Catalog
for details
for details
-40
[-40]
See Catalog
for details
**Refer to catalog for
additional data
LS
59
Stainless
Steel
HDLS
*HDLS, LSX and BX Series are available with the following Switching Options: NC/NO snap-action, Maintained;
2NC/2NO snap-action, Maintained; 2NC/2NO snap-action, Center Neutral; 2NC/2NO snap-action, Sequential
CX, LSX, BX also available with 1NC Direct Acting
www.honeywell.com/sensing
7
LIMIT SWITCHES
Proper application of limit switches
The following are guidelines for the correct application of Limit Switches.
Never use the Limit Switch as a physical end stop. Mechanical damage or
incorrect operation may occur if this is done. Always ensure that the
mechanical actuator is protected from excessive mechanical shock. Never
release the actuator suddenly - gradual actuation and release will ensure that
stress on the mechanics of the switch is kept to a minimum. This has the
added benefit that the switch life will be improved. The diagrams illustrate
how to actuate your limit switch for optimum performance.
Standards and Electrical rating
IEC/EN 60947-1 explains the general rules relating to Low Voltage
switchgear and controlgear. The purpose of this standard is to
harmonize as much as possible the product performance and test
requirements for equipment where the rated voltage does not exceed
1,000 Vac or 1,500 Vdc.
WRONG
WRONG
RIGHT
FIXED STOP
RIGHT
For limit switches with pushrod actuators, the actuating force should be applied as
nearly as possible in line with the pushrod axis.
WRONG
IEC 60947-5-1 is part 5 of the general rules which relates to Controlcircuit devices and switching elements, where rated voltage does not
exceed 1,000 Vac or 600 Vdc. There are special requirements for control
switches with direct opening operation. These switches are marked on
the outside with this symbol:
WRONG
over-riding
cam
RIGHT
RIGHT
over-riding
cam
The Contact Element form defines the configuration and number of
contacts within the switch.
Cam or dog arrangements should be such that the actuator is not suddently released
to snap back freely.
Form Za – both contact elements have the same polarity
free position
Form Zb – the two contact elements are electrically separated.
interference
The Utilization Category defines the type of current carried – ac or dc –
and the typical application where the switch is used.
WRONG
The contact rating Designation relates to the Utilization Categories and
defines the conventional thermal current Ith (a) rated operational current Ie
(A) at rated operational voltages Ue and the VA rating.
free position
operated
position
end of
overtravel
RIGHT
Actuators
A range of actuators is available for limit switches. Illustrations of actuator
types available from this catalogue are shown at the beginning of each
product family. Other actuators may be available - for more information
please contact your local Honeywell office.
Roller lever
Top roller
lever
Adjustable
roller lever
Top pin
plunger
Top pin
plunger,
boot seal
end of
overtravel
WRONG
RIGHT
Operating mechanisms for limit switches shoud be so designed that, under any
operating or emergency conditions, the limit switch is not operated beyond its
overtravel limit position. A limit switch should not be used as a mechanical stop.
WRONG
non-over-riding
Top roller
plunger
Top roller
plunger,
boot seal
Top roller
Top roller
plunger,
plunger,
perpendicular perpendicular,
boot seal
Ball bearing
plunger
RIGHT
over-riding
Side
pin plunger
8
Side
roller plunger
Roller lever
Yoke lever
Rod lever
Wobble head
For limit switches with lever actuators, the actuating force should be applied as
nearly perpendicular to the lever as practical and perpendicular to the shaft axis
about which the lever rotates.
www.honeywell.com/sensing
LIMIT SWITCHES
A Note on Degrees of Protection
IP Classification
NEMA Classification (USA)
The IEC 529 standard describes a system for classifying the degree of
protection provided by the enclosures of electrical equipment. The level of
protection given by the enclosure is indicated by the IP code. This code
system uses the letters ‘‘IP’’ (International Protection) followed by up to four
digits. Normally only the first two digits are used.
IP 1st Digit
2nd Digit
3rd Digit
4th Digit
The first digit is numerical and indicates the level of protection within the
enclosure against the ingress of solid foreign objects and access to
hazardous parts by persons.
The second digit is also numerical and indicates the level of protection
against the ingress of WATER into the enclosure.
NEMA (National Electrical Manufacturer’s Association) prepares standards
which define a product, process or procedure with reference to one or more
of the following: nomenclature, composition, construction, dimensions,
tolerances, safety, operating characteristics, performance, quality, electrical
rating, testing and the service for which designed. This standard provides
degrees of protection for Enclosures for Electrical Equipment (1000 Volts
Maximum) similar to that of the IEC 529 standard. The reference standard
herein reflects the latest data in the NEMA Standards Publication when this
information went to print. Please check the most current NEMA
Standards Publication for the latest information.
Non-hazardous locations
The third digit is a letter and indicates a higher level of protection for
persons against access to hazardous parts.
Type 1 enclosures are intended for indoor use primarily to provide a
degree of protection against contact with the enclosed equipment.
The fourth digit is also a letter and is used in exceptional cases for
supplementary information.
Type 3 enclosures are intended for outdoor use primarily to provide a
degree of protection against windblown dust, rain, sleet, and external ice
formation.
If the first or second digit is not required to be specified, then it is replaced
by the letter ‘‘X’’ (‘‘XX’’ if both digits are not required). While the tables
below serve as a guide to the level of protection, Honeywell recommends
that customers refer to the full official IEC specification for the exact
definitions. If in doubt about the degree of protection required for a particular
application, please consult your local Honeywell office.
Type 4 enclosures are intended for indoor or outdoor use primarily to
provide a degree of protection against windblown dust and rain, splashing
water, and hose-directed water.
Note:
Type 4X enclosures are intended for indoor or outdoor use primarily to
provide a degree of protection against corrosion, windblown dust and rain,
splashing water, and hose-directed water.
The IEC 529 standard does not relate to protection against rust, corrosion,
icing or corrosive solvents (e.g. cutting fluids) and that product coded IP 67
may not necessarily meet IP 66 requirements.
Type 6 enclosures are intended for indoor or outdoor use primarily to
provide a degree of protection against the entry of water during occasional
temporary submersion at a limited depth.
First Digit Protection against ingress of solid objects
Type 6P enclosures are intended for indoor or outdoor use primarily to
provide a degree of protection against the entry of water during prolonged
submersion at a limited depth.
IP TEST
0 no protection
1 protected against solid objects with a diameter greater than 50 mm
2 protected against solid objects with a diameter greater than 12 mm
Type 12 enclosures are intended for indoor use primarily to provide a degree
of protection against dust, falling dirt, and dripping noncorrosive liquids.
3 protected against solid objects with a diameter greater than 2.5 mm
Type 13 enclosures are intended for indoor use primarily to provide a degree
of protection against dust, spraying water, oil and noncorrosive coolant.
4 protected against solid objects with a diameter greater than 1 mm
Note:
5 protected against dust-limited ingress (no harmful deposit)
Enclosures are based, in general, on the broad definitions outlined in NEMA
Standards. Therefore, it will be necessary to ascertain that a particular
enclosure will be adequate when exposed to the specific conditions that
might exist in intended applications.
6 totally protected against dust
Second Digit Protection against ingress of water
IP TEST
0 no protection
1 protected against vertically falling drops of water
2 protected against vertically falling drops of water when the enclosure is
tilted at an angle up to 15 degrees
3 protected against water sprayed at an angle of 60 degrees from the vertical
4 protected against splashing water from all directions – limited ingress (no
harmful effects)
5 protected against low pressure jets of water from all directions – limited
ingress permitted
Except as might otherwise be noted, all references to products relative to
NEMA enclosure type are based on Honeywell evaluation and Underwriter’s
Laboratory (UL) tested. This NEMA Standards Publication does test for
environmental conditions such as corrosion, rust, icing, oil, and coolants.
The IEC 529 does not, and does not specify degree of protection against
mechanical damage of equipment. For this reason, and because the tests and
evaluations for other characteristics are not identical, the IEC Enclosure
Classification Designations cannot be exactly equated with NEMA Enclosure
Type Numbers.
6 protected against powerful jets of water from all directions – limited
ingress permitted
7 protected against the effects of temporary immersion in water
8 protected against the effects of continuous immersion in water
www.honeywell.com/sensing
9
GLOBAL LIMIT SWITCHES
EVN2000 Series
EN 50047
Global Limit
Switches
The EVN2000 series limit switch is an innovative product which has been developed to address a
need highlighted by Original Equipment Manufacturers (OEM), where “Ease of Wiring” is required.
With the new design there is no need for access to the inside of the housing and therefore the
housing cover, cover screws and gasket become obsolete. Furthermore, the integrated cable
gland eliminates the need for additional conduit or cable gland hardware. All Normally Closed (NC)
contacts are Direct Opening.
Mechanical life:
Sealing:
Operating temperature:
Approvals:
Housing material:
Termination:
Switching options:
Actuators
10 million
IP 66/67, NEMA 1, 12, 13
-25 °C to 85 °C [-13 °F to 185 °F]
IEC/EN 60947-5-1
EN 60529
EN81-1
AC15 A300
DC13 Q300
UL, CE
Plastic
Insulation Displacement Terminals (IDT)
Single Pole, Double Throw,
Snap action contacts (1NC/1NO)
SPDT
Operating characteristics
Actuator
type
Operating
Free Pretravel
Travel to
Overtravel Differential Operating
torque/force position
positive opening
travel
point
(OF)
(FP)
(PT)
(PO)
(OT)
(DT)
(OP)
Side
rotary
EVN2000A
0,120 N m
[1.10 lb in]
Top pin
plunger
EVN2000B
16,0 N
[3.60 lb]
Top roller
plunger,
parallel
0°
25°
45°
45°
12°
25°
20,0 mm 2,0 mm
[0.79 in] [0.08 in]
3,5 mm
[0.14 in]
4,0 mm
[0.16 in]
1,0 mm
[0.04 in]
18,0 mm
[0.71 in]
16,0 N
[3.60 lb]
30,0 mm 2,0 mm
[1.18 in] [0.08 in]
3,5 mm
[0.14 in]
4,0 mm
[0.16 in]
1,0 mm
[0.04 in]
28,0 mm
[1.10 in]
16,0 N
[3.60 lb]
30,0 mm 2,0 mm
[1.18 in] [0.08 in]
3,5 mm
[0.14 in]
4,0 mm
[0.16 in]
1,0 mm
[0.04 in]
28,0 mm
[1.10 in]
EVN2000C
OPTIONS
Side rotary plastic roller
Top roller
plunger,
perpendicular
EVN2000D
Top roller plunger, parallel
Top pin plunger
CAT. LISTING
EVN2000B
Top roller plunger, perpendicular
CAT. LISTING
EVN2000A
CAT. LISTING
EVN2000C
CAT. LISTING
EVN2000D
10
www.honeywell.com/sensing
GLOBAL LIMIT SWITCHES
VL Series
General Purpose Compact
Limit Switches
The new economical SZL-VL Series miniature type limit switches are
specially designed for potential applications of small mounting space.
These miniature switches are ideal for OEM machinery which requires a
rugged and reliable limit switch that is capable of being mounted in space
restricted applications. A wide range of actuators and optional neon lamp
indicators add additional flexibility. A special pre-molded flexible cable
gland allows for fast and simple wiring termination.
Mechanical life:
Sealing:
Operating temperature:
Approvals:
Termination:
Contacts:
Electrical ratings:
Ampere rating:
Switching options:
SPDT
up to 10 million operations
IP 64
-20 °C to 60 °C [-4 °F to 140 °F]
UL, C-UL, CE
Cable gland
Gold plated silver
250 Vac 125 Vdc max.
5 A @ 250 Vac max./0.4 A @ 125 Vdc max.
Single Pole, Double Throw, Double break
(1NC/1NO)
VL
3
4
NO
NO
1
2
NC
NC
Actuators
Side rotary actuated switches
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
20°
75°
10°
OPTIONS
Roller lever
Roller lever, adjustable
41.2±.08
18 dia.x7
nylon roller
2
PT
0˚max
R3
0
M4 arm fixing nut
(Roller can be
rotated and locked
in any position
through 360˚)
+0.2
2-4.1
dia.
-0
mounting holes
+0.008
.161
dia.
-0
mounting holes
cover screw
M3x6
36.2±0.8
Adjustable length
of arm
(30-70)
0˚max
PT 2
1.425±.031
10.2
.402
M4 arm
fixing screw
(with hexagonal
holes)
12.5
.492
56±0.3
2.205±.012
47.7±0.8
1.878±.031
1.622±.031
2-M5 (P=0.8)
18.5 tapped
.728
7 .276 in depth
mounting holes
20.4±0.3
.803±.012
14
.551
15.1
.594
28
1.102
Operating torque max.:
38.1
1.5
+0.2
2-4.1 0 dia.
mounting holes
7.5±0.2
.295±.008
25
.984
(Standard type)
5,88 N [1.32 lb]
10.2
.402
Arm fastening plate
12.5
.492
18.5
.728
Mounting metal
M6 arm fastening
plate screw with
hexagonal holes
56±0.3
2.205±.012
64
2.520
2-M3x23
cover screw
21±0.2
.827±.008
(Roller can be rotated
and locked in any
position through 360˚)
M4 arm fastening
plate screw with
hexagonal holes
+0.008
.161 -0 dia.
mounting holes
2-M5 (P=0.8)
tapped
mounting holes
42.7±0.8
1.681±.031
33.5±0.8
1.319±.031
28.5±0.8
1.122±.031
18 dia.x7 nylon rooler
M3x6
cover screw
2-M5 (P=0.8) tapped
7 .276 in depth
mounting holes
64
2.520
2.0
.079
2-M3x23
cover screw
2-M5 (P=0.8) tapped
mounting holes
14
.551
21±0.2
.827±.008
28
1.102
Operating torque max.:
CAT. LISTING
SZL-VL-A
www.honeywell.com/sensing
7.5±0.2
15.1 .295±.008
.594 20.4±0.3
25
.803±.012
.984
(Standard type)
(46.4) (1.827)
3,35 N to 7,84 N [0.75 lb to 1.76 lb]
CAT. LISTING
SZL-VL-B
11
GLOBAL LIMIT SWITCHES
VL Series
Side rotary actuated switches (continued)
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
Operating force max. (OF):
Adjustable rod
5.5
.217
0
PT 2
˚ max
2.6 .102 dia. rod
and locked in any
(Roller can be rotated
position through 360˚)
M4 rod fastening plate
screw with hexagonal holes
Adjustable lenght of rod
(30-118)
+0.2
2-4.1 0 dia.
mounting holes
44.9
1.768
36.3±0.8
1.429±.031
Top pin plunger
7. 276 dia.
stainless steel plunger
18.5
.728
12.5 Rod mounting metal
.492
M6 mounting rod
fastening screw with
hexagonal holes
M3x6
cover screw
2-M5 (P=0.8) tapped
7 .276 in depth
mounting holes
64
2.520
56±0.3
2.205±.012
2-M5 (P=0.8) tapped
mounting holes
2-M3x23
cover screw
Operating torque max.:
15.1
.594
25
.984
(44.9) (1.768)
10.2
.402
3
.118
PT 1.5 max
+0.2 dia.
2-4.1
0
mounting holes
26.5
1.043
4
.157
+0.008
.161
-0
dia.
mounting holes
M3x6
cover screw
2-M5 (P=0.8) tapped
7 .276 in depth
mounting holes
20.4±0.3
.803±.012
56±0.3
2.205±.012
14
.551
21±0.2
.827±.008
28
1.102
1,5 mm [0.060 in]
4,0 mm [0.158 in]
0,7 mm [0.028 in]
8,83 N [2 lb]
10.2
.402
Rod fastening plate
+0.008
.161 -0 dia.
mounting holes
Plunger actuated switches
64
2.520
7.5±0.2
.295±.008
20.4±0.3
.803±.012
(Standard type)
2-M5 (P=0.8) tapped
mounting holes
2-M3x23
cover screw
14
.551
21±0.2
.827±.008
28
1.102
2 N to 7,84 N
[0.45 lb to 1.76 lb]
7.5±0.2
15.1 .295±.008
.594
25
.984
(Standard type)
CAT. LISTING
SZL-VL-C
CAT. LISTING
SZL-VL-D
Top roller plunger
12.5 dia.x3.8
stainless steel roller
10.2
.402
PT 1.5 max
14.8
.583
+0.2
2-4.1 0 dia.
mounting holes
38
1.496
4
.157
+0.008
.161 -0 dia.
mounting holes
M3x6
cover screw
2-M5 (P=0.8) tapped
7 .276 in depth
mounting holes
20.4±0.3
.803±.012
56±0.3
2.205±.012
64
2.520
2-M5 (P=0.8) tapped
mounting holes
2-M3x23
cover screw
14
.551
21±0.2
.827±.008
28
1.102
15.1
.594
25
.984
7.5±0.2
.295±.008
(Standard type)
CAT. LISTING
SZL-VL-H
12
www.honeywell.com/sensing
GLOBAL LIMIT SWITCHES
Plunger actuated switches (continued)
Wobble actuated switches
Cross roller plunger
Pretravel max. (PT):
Overtravel min. (OT):
Operating force max. (OF):
12.5 dia.x3.8
stainless steel roller
10.2
.402
30 mm [1.18 in]
20 mm [0.788 in]
0,88 N [0.2 lb]
Plastic rod, coil spring
PT 1.5 max
14.8
.583
+0.2
2-4.1 0 dia.
mounting holes
+0.008
.161 -0 dia.
mounting holes
38
1.496
M3x6
cover screw
PT 50 max
4
.157
56±0.3
2.205±.012
5.8 dia.
.228
64
2.520
100±1.5
3.937±.059
2-M5 (P=0.8) tapped
mounting holes
2-M3x23
cover screw
14
.551
21±0.2
.827±.008
28
1.102
15.1
.594
25
.984
7.5±0.2
.295±.008
(Standard type)
CAT. LISTING
SZL-VL-E
10.2
.402
41.5
1.634
2-M5 (P=0.8) tapped
7 .276 in depth
mounting holes
20.4±0.3
.803±.012
3 dia.
.118
Nylon rod
+0.2
2-4.1 0 dia.
mounting holes
+0.008
.161 -0 dia.
mounting holes
4
.157
M3x6
cover screw
56±0.3
2.205±.012
2-M5 (P=0.8) tapped
20.4±0.3
.803±.012
7 .276 in depth
mounting holes
64
2.520
2-M5 (P=0.8) tapped
mounting holes
2-M3x23
cover screw
21±0.2
.827±.008
28
1.102
15.1
.594
25
.984
14
.551
7.5±0.2
.295±.008
(Standard type)
CAT. LISTING
SZL-VL-F
Coil spring
SZL-VL-G
10.2
.402
PT 30 max
1.2 dia.
.047 stainless
steel wire
51.5
2.028
100±1.5
3.937±.059
+0.2
2-4.1 0 dia.
mounting holes
4
.157
+0.008
.161
-0 dia.
mounting holes
M3x6
cover screw
56±0.3
2.205±.012
20.4±0.3
.803±.012
2-M5 (P=0.8) tapped
7 .276 in depth
mounting holes
64
2.520
2-M5 (P=0.8) tapped
mounting holes
2-M3x23
cover screw
14
.551
21±0.2
.827±.008
28
1.102
15.1
.594
25
.984
7.5±0.2
.295±.008
(Standard type)
CAT. LISTING
SZL-VL-G
www.honeywell.com/sensing
13
GLOBAL LIMIT SWITCHES
GLS Series switches offer a complete range of CENELEC approved
products, and are suitable for most potential industrial applications.
GLS Series
Global Limit
Switches
The standard product EN 50041 norm defines the switch mounting
centres as 30 mm x 60 mm and also defines the switching
characteristics of the side rotary head with fixed lever, top pin plunger
and top roller plunger. This means that the switch can be interchanged
in the application with other EN 50041 switches with mounting and
switching characteristics maintained. Honeywell offers many more head
styles and switching options.
The miniature EN 50047 product range offers the user a choice of
plastic, metal and three conduit versions which are all mounting (20 mm
x 22 mm) compatible with each other. The EN 50047 standard defines
how the switches are mounted and the switching characteristics for fixed
side rotary lever, top pin plunger and top roller plunger.
Electrical ratings
Switching options:
IEC947-5-1/EN60947-5-1
Designation &
SPDT
Rated operational current Ie (A)
Utilization Category
at rated operational voltage Ue
120V
240V
380V 480V 500V
3
1.9
1.5
Single Pole, Double Throw, Snap action contacts (1NC/1NO)
VA
14
13
rating
600V
Make Break
1.4
1.2
7200 720
AC15
A600
6
AC15
A300
6
3
-
-
-
-
7200 720
AC15
B300
3
1.5
-
-
-
-
3600 360
AC14
D300
0.6
0.3
-
-
-
-
432
72
125V
250V
22
21
DPDT
Double Pole, Double Throw Snap action contacts (2NC/2NO)
DC13
Q300
0.55
0.27
69
69
13
11
23
DC13
R300
0.22
0.1
28
28
21
Vibration (Actuator not fitted):
Shock (Actuator not fitted):
10 g conforming to IEC 68-2-6
50 g conforming to IEC 68-2-27
Terminal marking to EN 50013
14
12
24
22
Actuators
Operating characteristics
Actuator
type
Body
size
Operating torque/force
(OF)
SPDT
Lever types
A,
A*A, A*B,
A4J
Top pin
plunger
B
Top roller
plunger
C
Top roller
lever
D
Wobble head
E7B, E7D,
K8B, K8C
14
EN50041
(GLA)
DPDT
Free position
(FP)
SPDT
DPDT
EN50041
(GLA)
EN50047
(GLC, GLD,
GLE)
EN50041
(GLA)
EN50047
(GLC, GLD,
GLE)
EN50041
(GLA)
EN50047
(GLC, GLD,
GLE)
EN50041
(GLA)
SPDT
DPDT
Travel to
positive opening
(PO)
SPDT
DPDT
0,330 N m
[2.90 lb in]
0,120 N m
[1.10 lb in]
16,0 N
[3.60 lb]
13,0 N
[2.90 lb]
GLE only
16,0 N
[3.60 lb]
16,0 N
[3.60 lb]
13,0 N
[2.90 lb]
GLE only
9,5 N
[2.10 lb]
11,0 N
[2.4 lb]
26°
9,0 N
[1.9 lb]
GLE only
SPDT
DPDT
Differential travel
(DT)
Operating point
(OP)
SPDT
SPDT
DPDT
DPDT
12°
55°
0,165 N m
[1.50 lb in]
GLE only
16,0 N
[3.60 lb]
Overtravel
(OT)
59°
0°
EN50047
(GLC, GLD,
GLE)
Pretravel
(PT)
26°
49°
11.5°
8°
37,5 mm
[1.48 in]
2,5 mm
[0.10 in]
4,5 mm
[0.18 in]
4,5 mm
[0.18 in]
21,0 mm
[0.83 in]
3,0 mm
[0.12 in]
5,0 mm
[0.20 in]
3,0 mm
[0.12 in]
50,5 mm
[2.00 in]
2,5 mm
[0.10 in]
4,5 mm
[0.18 in]
4,5 mm
[0.18 in]
31,0 mm
[1.22 in]
3,0 mm
[0.12 in]
5,0 mm
[0.20 in]
3,0 mm
[0.12 in]
65,2 mm
[2.57 in]
4,2 mm
[0.165 in]
8,3 mm
[0.33 in]
9,0 mm
[0.35 in]
1,7 mm
[0.067 in]
61,0 mm
[2.40 in]
39,25 mm
[1.55 in]
3,45 mm
[0.14 in]
6,9 mm
[0.27 in]
5,2 mm
[0.205 in]
1,3 mm
[0.19 in]
35,8 mm
[1.41 in]
18°
__
__
8°
__
16°
__
__
0,1 N
[0.90 in lb]
35,0 mm
[1.38 in]
0,9 mm
[0.035 in]
0,9 mm
[0.035 in]
0,6 mm
[0.024 in]
48,0 mm
[1.89 in]
0,9 mm
[0.035 in]
0,9 mm
[0.035 in]
18,0 mm
[0.71 in]
0,6 mm
[0.024 in]
28,0 mm
[1.10 in]
0°
EN50047
(GLC, GLD,
GLE)
1,3 N
[0.29 lb]
1,1 N
[0.25 lb]
GLE only
www.honeywell.com/sensing
10°
7°
__
GLOBAL LIMIT SWITCHES
GLA EN 50041
Standard metal body
Side rotary adjustable roller
Top pin plunger
FP
Mechanical life:
up to 15 million
Sealing:
IP 67, NEMA 1, 4, 12, 13
Operating temperature:
-25 °C to 85 °C
[-13 °F to 185 °F]
Approvals:
IEC/EN 60947-5-1
AC15 A300/A600
DC13 Q300
UL, CSA, CE
Switching options:
SPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
DPDT
Double Pole, Double Throw
Snap action contacts (2NC/2NO)
HEAD OPTIONS
Plastic roller
CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
CAT. LISTING
GLAA01A2A
GLAA20A2A
GLAB01A2A
GLAB20A2A
GLAC01A2A
CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
20 mm
CAT. LISTING
GLAA01A2B
GLAA20A2B
GLAB01A2B
GLAB20A2B
GLAC01A2B
GLAC20A2B
37,5
(1.48)
CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
20 mm
CAT. LISTING
GLAA01B
GLAA20B
GLAB01B
GLAB20B
GLAC01B
GLAC20B
Top roller plunger
Metal roller
CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
Side rotary
Side rotary adjustable metal rod
FP
CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
20 mm
CAT. LISTING
GLAA01C
GLAA20C
GLAB01C
GLAB20C
GLAC01C
GLAC20C
41
(1.61)
34
(1.34)
4,5
(.17)
75˚
Top roller lever
¯ 3,2
(.13)
13,0
(.51)
32 - 134
75˚ (1.26 - 5,28)
No lever
Levers: Levers for side rotary types are
ordered separately (see pages 71-73 for
details)
CONTACT
SPDT
DPDT
SPDT
CONDUIT
½ in NPT
½ in NPT
PG 13,5
CAT. LISTING
GLAA01A
GLAA20A
GLAB01A
Plastic roller
CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
20 mm
CAT. LISTING
GLAA01A1A
GLAA20A1A
GLAB01A1A
GLAB20A1A
GLAC01A1A
GLAC20A1A
CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
20 mm
CAT. LISTING
GLAA01A1B
GLAA20A1B
GLAB01A1B
GLAB20A1B
GLAC01A1B
GLAC20A1B
Ø 18,7
(.74)
15
(.6)
CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
CAT. LISTING
GLAA01A4J
GLAA20A4J
GLAB01A4J
GLAB20A4J
GLAC01A4J
CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
65,2
(2.51) FP
35,0
(1.38)
CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
20 mm
CAT. LISTING
GLAA01D
GLAA20D
GLAB01D
GLAB20D
GLAC01D
GLAC20D
Metal roller
CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
www.honeywell.com/sensing
15
GLOBAL LIMIT SWITCHES
GLA EN 50041
Standard metal body
(continued)
GLC EN 50047
Standard metal body
Wobble, coil actuator
Wobble, cat whisker
22
(.87)
20
(.78)
24,75
(0.97)
3
(.12)
R 2,15
(.08)
CONTACT
SPDT
SPDT
DPDT
SPDT
DPDT
CONDUIT
½ in NPT
PG 13,5
PG 13,5
20 mm
20 mm
30,5
(1.20)
30
(1.18)
CAT. LISTING
GLAA01E7B
GLAB01E7B
GLAB20E7B
GLAC01E7B
GLAC20E7B
55
(2.16)
3,5
(0.138)
14,5
(.57)
15,25
(.600)
Coil wobble head, stainless steel
spring actuator
conduit thread
PG 13,5
CONTACT
SPDT
SPDT
CONDUIT
½ in NPT
PG 13,5
CAT. LISTING
GLAA01K8B
GLAB01K8B
Wobble, cat whisker, coil
actuator
Mechanical life:
up to 10 million
Sealing:
IP 66, NEMA 1, 4, 12, 13
Operating temperature*:
-40 °C to 85 °C
[-40 °F to 185 °F]
Approvals:
IEC/EN 60947-5-1
AC15 A300
DC13 Q300
UL, CSA, CE
Switching options:
SPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
*Wobble actuator rated to -25 °C [-13 °F]
HEAD OPTIONS
Side rotary
°
CONTACT
SPDT
CONDUIT
½ in NPT
CAT. LISTING
GLAA01E7D
CONTACT
SPDT
DPDT
SPDT
CONDUIT
½ in NPT
½ in NPT
PG 13,5
CAT. LISTING
GLAA01K8C
GLAA20K8C
GLAB01K8C
Plastic roller
CONTACT
SPDT
SPDT
CONDUIT
½ in NPT
PG 13,5
CAT. LISTING
GLCA01A1A
GLCB01A1A
CONDUIT
½ in NPT
PG 13,5
20 mm
CAT. LISTING
GLCA01A1B
GLCB01A1B
GLCC01A1B
Metal roller
CONTACT
SPDT
SPDT
SPDT
16
www.honeywell.com/sensing
GLOBAL LIMIT SWITCHES
GLC EN 50047
Standard metal body
(continued)
Side rotary adjustable
Wobble, coil actuator
Top pin plunger
Ø 9.9
(.390)
DT
OP
18±0,5
(.709)
CONTACT
SPDT
SPDT
SPDT
Plastic roller
CONTACT
SPDT
SPDT
CONDUIT
½ in NPT
PG 13,5
20 mm
CAT. LISTING
GLCA01B
GLCB01B
GLCC01B
Top roller plunger
CONDUIT
½ in NPT
PG 13,5
CAT. LISTING
GLCA01A2A
GLCB01A2A
CONDUIT
½ in NPT
PG 13,5
20 mm
CAT. LISTING
GLCA01A2B
GLCB01A2B
GLCC01A2B
Mechanical life:
31,0 FP
1.22
Metal roller
CONTACT
SPDT
SPDT
SPDT
CONTACT
SPDT
SPDT
SPDT
CONDUIT
½ in NPT
PG 13,5
20 mm
CAT. LISTING
GLCA01C
GLCB01C
GLCC01C
CONDUIT
½ in NPT
PG 13,5
20 mm
CAT. LISTING
GLCA01D
GLCB01D
GLCC01D
CONTACT
SPDT
SPDT
SPDT
up to 5 million
CONDUIT
½ in NPT
PG 13.5
20 mm
CAT. LISTING
GLCA01E7B
GLCB01E7B
GLCC01E7B
Wobble, cat whisker
Side rotary adjustable, metal rod
Top roller lever
41
(1.61)
Ø
34
(1.34)
4,5
(.17)
75˚
FP 39,2
¯ 3,2
(.13)
(1.54)
32 - 134
75˚ (1.26 - 5,28)
15
(.6)
CONTACT
SPDT
SPDT
SPDT
Mechanical life:
CONTACT
SPDT
SPDT
CONDUIT
½ in NPT
PG 13,5
CAT. LISTING
GLCA01A4J
GLCB01A4J
CONTACT
SPDT
SPDT
www.honeywell.com/sensing
5 million
CONDUIT
½ in NPT
PG 13,5
CAT. LISTING
GLCA01K8A
GLCB01K8A
17
GLOBAL LIMIT SWITCHES
GLD EN 50047
Double insulated plastic
standard body
Side rotary adjustable
Plastic roller/metal lever
22
(.87)
20
(.78)
24,75
(0.97)
GLE EN 50047 Compatible
3 conduit
metal standard body
3
(.12)
CONTACT
SPDT
SPDT
R 2,15
(.08)
55
(2.16)
30,5
(1.20)
CAT. LISTING
GLDA01A2B
GLDB01A2B
GLDC01A2B
Side rotary adjustable metal rod
15,25
(.600)
CONTACT
SPDT
SPDT
conduit thread
PG 13,5
CONDUIT
½ in NPT
PG 13,5
CAT. LISTING
GLDA01A4J
GLDB01A4J
Top pin plunger
Mechanical life:
See GLC section
Sealing:
IP 66, NEMA 1, 2, 13
Operating temperature*:
-40 °C to 85 °C
[-40 °F to 185 °F]
Approvals:
IEC/EN 60947-5-1
AC15 A600
DC13 Q300
UL, CSA, CE
Switching options:
SPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
*Wobble actuator rated to -25 °C [-13 °F]
See GLC section for dimension
illustrations
Side rotary
Plastic roller/lever
CONDUIT
½ in NPT
PG 13,5
CAT. LISTING
GLDA01A1A
GLDB01A1A
Metal roller/lever
CONDUIT
½ in NPT
PG 13,5
20 mm
CONTACT
SPDT
SPDT
SPDT
CONDUIT
½ in NPT
PG 13,5
20 mm
CAT. LISTING
GLDA01B
GLDB01B
GLDC01B
Mechanical life:
up to 10 million
Sealing:
IP 66, NEMA 1, 4, 12, 13
Operating temperature*:
-40 °C to 85 °C
[-40 °F to 185 °F]
Approvals:
IEC/EN 60947-5-1
AC15 A300
DC13 Q300
UL, CSA, CE
Switching options:
SPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
DPDT
Double Pole, Double Throw
Snap action contacts (2NC/2NO)
*Wobble actuator rated to -25 °C [-13 °F]
Top roller plunger
CONTACT
SPDT
SPDT
SPDT
CONDUIT
½ in NPT
PG 13,5
20 mm
CAT. LISTING
GLDA01C
GLDB01C
GLDC01C
CONDUIT
½ in NPT
PG 13,5
20 mm
CAT. LISTING
GLDA01D
GLDB01D
GLDC01D
HEAD OPTIONS
Side rotary
Top roller lever
HEAD OPTIONS
CONTACT
SPDT
SPDT
SPDT
CONDUIT
½ in NPT
PG 13,5
20 mm
3,5
(0.138)
14,5
(.57)
CONTACT
SPDT
SPDT
CAT. LISTING
GLDA01A2A
GLDB01A2A
Metal roller/metal lever
CONTACT
SPDT
SPDT
SPDT
30
(1.18)
CONDUIT
½ in NPT
PG 13.5
CONTACT
SPDT
SPDT
SPDT
Wobble, coil actuator
CONTACT
SPDT
SPDT
SPDT
CONDUIT
½ in NPT
PG 13,5
20 mm
CAT. LISTING
GLDA01E7B
GLDB01E7B
GLDC01E7B
CAT. LISTING
GLDA01A1B
GLDB01A1B
GLDC01A1B
Plastic roller
CONTACT
SPDT
SPDT
DPDT
CAT. LISTING
GLEA01A1A
GLEB01A1A
GLEB24A1A
CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
CAT. LISTING
GLEA01A1B
GLEA24A1B
GLEB01A1B
GLEB24A1B
GLEC01A1B
Metal roller
CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
18
CONDUIT
½ in NPT
PG 13,5
PG 13,5
www.honeywell.com/sensing
GLOBAL LIMIT SWITCHES
GLE EN 50047 Compatible
3 conduit
metal standard body
(continued)
Offset side rotary roller
Side rotary adjustable metal rod
Top roller lever
41
(1.61)
FP 39,2
(1.54)
4,5
(.17)
34
(1.34)
75˚
¯ 3,2
(.13)
32 - 134
75˚ (1.26 - 5,28)
Plastic roller
CONTACT
SPDT
SPDT
CONDUIT
½ in NPT
PG 13,5
15
(.6)
CAT. LISTING
GLEA01A5A
GLEB01A5A
CONTACT
SPDT
DPDT
CONDUIT
PG 13,5
PG 13,5
CAT. LISTING
GLEB01A4J
GLEB24A4J
Side rotary adjustable
CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
CONDUIT
½ in NPT
½ in NPT
PG 13,5
13,5
20 mm
20 mm
CAT. LISTING
GLEA01D
GLEA24D
GLEB01D
GLEB24D
GLEC01D
GLEC24D
Wobble, coil actuator
Top pin plunger
16˚ ±5˚
(2.37)
OP
DT
10˚
OT
35˚ (max)
100
(3.92)
18
(0.709)
Plastic roller
CONTACT
SPDT
DPDT
SPDT
CONDUIT
½ in NPT
½ in NPT
PG 13,5
CAT. LISTING
GLEA01A2A
GLEA24A2A
GLEB01A2A
CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
CAT. LISTING
GLEA01B
GLEA24B
GLEB01B
GLEB24B
Mechanical life:
CONTACT
SPDT
DPDT
SPDT
DPDT
Top roller plunger
Metal roller
CONTACT
SPDT
SPDT
DPDT
CONTACT
SPDT
DPDT
SPDT
DPDT
CONDUIT
½ in NPT
PG 13,5
PG 13,5
CAT. LISTING
GLEA01A2B
GLEB01A2B
GLEB24A2B
Ø 12,4
(0.49)
31,0
FP
1.23
CONTACT
SPDT
DPDT
SPDT
DPDT
DPDT
CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
up to 5 million
CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
CAT. LISTING
GLEA01E7B
GLEA24E7B
GLEB01E7B
GLEB24E7B
CAT. LISTING
GLEA01C
GLEA24C
GLEB01C
GLEB24C
GLEC24C
www.honeywell.com/sensing
19
GLOBAL LIMIT SWITCHES
GLL EN50047
Standard plastic body
Mechanical life:
5 million
Sealing:
IP 65, NEMA 1, 12, 13
Operating temperature:
-10 °C to 80 °C
[14 °F to 176 °F]
Approvals:
c-UL-US, CE, CCC
Switching options:
SPDT
Single Pole, Double Throw
Direct opening snap action contacts
(1NC/1NO)
Top roller plunger
CONDUIT
½ in NPT
20 mm
Side rotary, 31,5 mm fixed length
lever with 50 mm rubber roller
CAT. LISTING
GLLA01C
GLLC01C
Side rotary, 25 mm fixed length
with metal roller
CONDUIT
½ in NPT
20 mm
CAT. LISTING
GLLA01A1Y
GLLC01A1Y
Side rotary, 20 mm to 65 mm
adjustable length lever with 50
mm rubber roller
Actuators
HEAD OPTIONS
Top plunger
CONDUIT
½ in NPT
20 mm
CAT. LISTING
GLLA01A1B
GLLC01A1B
Side rotary, 20 mm to 65 mm
adjustable length lever with
metal roller
CONDUIT
1/2 in NPT
20 mm
CONDUIT
½ in NPT
20 mm
CAT. LISTING
GLLA01B
GLLC01B
CONDUIT
½ in NPT
20 mm
20
CAT. LISTING
GLLA01A2B
GLLC01A2B
www.honeywell.com/sensing
CAT. LISTING
GLLA01A2Y
GLLC01A2Y
COMPACT LIMIT SWITCHES
SL1 Series
Compact Limit
Switches
The SL1 Series compact limit switches are sealed, sensitive and have a long life. The compact size makes them
suitable for the total miniaturization of machinery or equipment.
Mechanical life:
Sealing:
Operating temperature:
Approvals:
Termination:
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
Electrical rating/contact:
10 million
IP 67, NEMA 3, 4, 13
-10 °C to 70 °C [14 °F to 160 °F]
UL, CSA, CE
Cable gland
11,76 N [2.64 lb]
1,5 mm [0.060 in]
3,0 mm [0.118 in]
0,10 mm [0.004 in]
SL1-*
5A - 125, 250 Vac
Silver
SL1-* K 0.1 A - 125 Vac; 0.1 A - 30 Vdc
Gold clad cross point
Switching options:
SPDT
Single Pole, Double Throw,
Snap action contacts (1NC/1NO)
Actuators
OPTIONS
Top roller plunger, parallel, boot seal
Top pin plunger
11 D X 4W ROLLER
PT
25,4
(OP)
CONTACT
Silver
Gold clad cross point
CAT. LISTING
SL1-H
SL1-HK
Top roller plunger, parallel
CAT. LISTING
SL1-B
SL1-BK
Top roller plunger, long, parallel
41,4
(OP)
31,4
(OP)
CONTACT
Silver
Gold clad cross point
CONTACT
Silver
Gold clad cross point
CAT. LISTING
SL1-A
SL1-AK
CONTACT
Silver
Gold clad cross point
www.honeywell.com/sensing
CAT. LISTING
SL1-E
SL1-EK
21
COMPACT LIMIT SWITCHES
Top roller plunger, perpendicular
Top roller lever
31,4
(OP)
CONTACT
Silver
Gold clad cross point
CAT. LISTING
SL1-D
SL1-DK
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
CONTACT
Silver
Gold clad cross point
Top roller plunger, long, perpendicular
41,4
(OP)
CONTACT
Silver
Gold clad cross point
22
CAT. LISTING
SL1-K
SL1-KK
www.honeywell.com/sensing
3,92 N [0.88
2,0 mm [0.079
4,0 mm [0.158
0,3 mm [0.012
CAT. LISTING
SL1-P
SL1-PK
lb]
in]
in]
in]
COMPACT LIMIT SWITCHES
14CE/914CE Series
Miniature Enclosed
Switches
The 14CE/914CE Series offers a miniature, rugged, compact, pre-wired switch which has gained
wide market acceptance and performed successfully in a wide range of potential applications. The
entire range of 14CE and 914CE switches has been approved to meet the requirements of the Low
Voltage directive and is therefore CE marked.
CE switches have different degrees of protection from IP66 to IP68 for the fully booted head styles.
The cable entry is fully potted using a special compound to ensure that ingress is virtually
impossible.
Mechanical life:
Sealing:
Operating temperature:
Approvals:
Operating force (OF):
Pretravel (PT):
Overtravel (OT):
Differential travel (DT):
Contact/Rating:
Connection:
Actuators
Switching options:
10 million
IP66, IP67, IP68
NEMA 1, 2, 3, 3R, 4, 6, 6P, 12 (boot seal), 13
14CE
0 °C to 70 °C [32 °F to 158 °F]
914CE
0 °C to 105 °C [32 °F to 221 °F]
14CE
CE
914CE
CSA, UL, CE
AC14 D300
DC13 R300
11,8 N [2,65 lb] max.
1,8 mm [0.71 in] max.
3,0 mm [0.118 in] min.
0,1mm [0.004 in] max.
(9)14CE* -*
Silver
A
(9)14CE* -*G
Gold
B
(9)14CE* -Q, -AQ, -AQ1 Silver
C
Harmonised CENELEC 4 x 0,75 mm2 cable (14CE)
SJTO 4 x 0,75 mm2 (18 AWG) cable (914CE)
Connector (dc), 4 pin male, M12 thread (-Q)
Connector (ac), 4 pin male, ½ in x 20 thread (-Q1)
SPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
S.P.D.T
BROWN
2
914CE
14CE
GREEN/YELLOW
BLUE
1
3
BLACK
Electrical ratings:
A
UL/CSA:
B
UL:
C
UL/CSA:
Amps
240 Vac, ind.
240 Vac, res.
28 Vdc, res.
28 Vdc, ind.
5 A, 1/10 Hp, 125 or 250 Vac
Make
1.2
5
3
3
Break
0.2
5
3
3
1 A res., 0.5 A ind., 30 Vdc
1 A, 125 Vac
3 A, 125 or 250 Vac
Operating
point (OP)
1,8 max PT
Free position
(FP)
Ø
14CE 7,4 (0.29)
914CE 8,65 (0.34)
www.honeywell.com/sensing
3 min OT
,
,
,
Side exit cable
(Option 'A')
23
COMPACT LIMIT SWITCHES
Plunger actuated switches
OPTIONS
Top pin plunger
Ø 10,0
(0.39)
Ball bearing plunger
Top roller plunger, parallel
Ø 12,4
(0.49)
OP
15,7
(0.62)
OP
28,4
(1.12)
OP
24,4
(0.96)
NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
3 ft cable, side exit
3 ft cable, bottom exit, gold contacts
6 ft cable, bottom exit
6 ft cable, bottom exit, gold contacts
9 ft cable, bottom exit
Connector (dc), bottom exit
Connector (ac), bottom exit
CAT. LISTING
914CE1-3
914CE1-3A
914CE1-3G
914CE1-6
914CE1-6G
914CE1-9
914CE1-Q
914CE1-Q1
EUROPE
CAT. LISTING
1 metre cable, bottom exit
14CE1-1
1 metre cable, side exit
14CE1-1A
1 metre cable, bottom exit, gold contacts 14CE1-1G
2 metre cable, bottom exit
14CE1-2
3 metre cable, bottom exit
14CE1-3
3 metre cable, side exit
14CE1-3A
3 metre cable, bottom exit, gold contacts 14CE1-3G
Connector (dc), side exit
14CE1-AQ
Connector (dc), bottom exit
14CE1-Q
NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
6 ft cable, bottom exit
CAT. LISTING
914CE66-3
914CE66-6
EUROPE/
1 metre cable, bottom exit
2 metre cable, bottom exit
CAT. LISTING
14CE66-1
14CE66-2
Adjustable plunger
Top pin plunger, boot seal
Ø 7,0
(0.28)
OP
NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
3 ft cable, side exit
3 ft cable, bottom exit, gold contacts
6 ft cable, bottom exit
6 ft cable, side exit
9 ft cable, bottom exit
Connector (dc), side exit
Connector (dc), bottom exit
Connector (ac), bottom exit
CAT. LISTING
914CE2-3
914CE2-3A
914CE2-3G
914CE2-6
914CE2-6A
914CE2-9
914CE2-AQ
914CE2-Q
914CE2-Q1
EUROPE
CAT. LISTING
1 metre cable, bottom exit
14CE2-1
1 metre cable, side exit
14CE2-1A
1 metre cable, bottom exit, gold contacts 14CE2-1G
2 metre cable, bottom exit
14CE2-2
2 metre cable, side exit
14CE2-2A
3 metre cable, bottom exit
14CE2-3
3 metre cable, side exit
14CE2-3A
3 metre cable, bottom exit, gold contacts 14CE2-3G
Connector (dc), side exit
14CE2-AQ
Connector (dc), bottom exit
14CE2-Q
Top roller plunger, parallel, boot
seal
OP
24,6
(0.98)
Ø 12,4
(0.49)
OP
34,4
(1.35)
Operating force (OF):
22,5 N [5.06 lb]
NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
3 ft cable, side exit
6 ft cable, bottom exit
9 ft cable, bottom exit
9 ft cable, side exit
Connector (ac), side exit
Connector (dc), bottom exit
Connector (ac), bottom exit
CAT. LISTING
914CE18-3
914CE18-3A
914CE18-6
914CE18-9
914CE18-9A
914CE18-AQ1
914CE18-Q
914CE18-Q1
EUROPE
1 metre cable, bottom exit
3 metre cable, bottom exit
Connector (dc), bottom exit
CAT. LISTING
14CE18-1
14CE18-3
14CE18-Q
Top pin plunger, panel mounted
M10x1 Thread
OP
29,2
(1.15)
NORTH AMERICA/GLOBAL
Connector (dc), bottom exit
24
NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
9 ft cable, bottom exit
CAT. LISTING
914CE19-3
914CE19-9
Manually operated
OP
27,4
(1.08)
Operating force (OF):
17,5 N [3.82 lb]
NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
6 ft cable, bottom exit
CAT. LISTING
914CE31-3
914CE31-6
EUROPE
1 metre cable, bottom exit
3 metre cable, bottom exit
CAT. LISTING
14CE31-1
14CE31-3
Top roller plunger, parallel,
panel mounted
Operating force (OF):
NORTH AMERICA/GLOBAL
6 ft cable, bottom exit
9,0 N [2.02 lb]
CAT. LISTING
914CE22-6
CAT. LISTING
914CE27-Q
OP
42,5
(1.67)
NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
6 ft cable, bottom exit
Connector (dc), bottom exit
www.honeywell.com/sensing
CAT. LISTING
914CE28-3
914CE28-6
914CE28-Q
COMPACT LIMIT SWITCHES
14CE/914CE Series
Plunger actuated switches
(continued)
Side rotary and wobble
actuated switches
Top roller plunger, perpendicular
OPTIONS
5,1
(0.20)
Rotary motion
Ø 12,4
(0.49)
OP
28,5
(1.12)
NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
6 ft cable, bottom exit
6 ft cable, side exit
9 ft cable, bottom exit
Connector (dc), bottom exit
Connector (ac), bottom exit
CAT. LISTING
914CE3-3
914CE3-6
914CE3-6A
914CE3-9
914CE3-Q
914CE3-Q1
EUROPE
1 metre cable, bottom exit
2 metre cable, bottom exit
3 metre cable, bottom exit
CAT. LISTING
14CE3-1
14CE3-2
14CE3-3
Top roller plunger,
perpendicular, boot seal
OP
34,4
(1.35)
(actuating lever not included - use any
LSZ51*, LSZ52*, LSZ54*, LSZ55* or LSZ61*
Series shown on pages 71-73)
Operating torque:
Pretravel (PT):
Overtravel (OT) mm:
Differential travel:
0,3 Nm [2.66 in lb]
30° max.
40° min.
3°
NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
3 ft cable, side exit
6 ft cable, bottom exit
9 ft cable, bottom exit
Connector (dc), bottom exit
CAT. LISTING
914CE16-3
914CE16-3A
914CE16-6
914CE16-9
914CE16-Q
EUROPE
1 metre cable, bottom exit
2 metre cable, bottom exit
3 metre cable, bottom exit
CAT. LISTING
14CE16-1
14CE16-2
14CE16-3
Wobble Spring wire
Operating force (OF):
17,5 N [3.82 lb]
NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
3 ft cable, side exit
CAT. LISTING
914CE55-3
914CE55-3A
Top roller plunger,
perpendicular, panel mounted
OP
42,5
(1.67)
NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
6 ft cable, bottom exit
CAT. LISTING
914CE29-3
914CE29-6
Operating Force (OF):
0,55 N [0.12 lb]
NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
6 ft cable, bottom exit
9 ft cable, bottom exit
Connector (dc), bottom exit
CAT. LISTING
914CE20-3
914CE20-6
914CE20-9
914CE20-Q
EUROPE
1 metre cable, bottom exit
3 metre cable, bottom exit
CAT. LISTING
14CE20-1
14CE20-3
www.honeywell.com/sensing
25
COMPACT LIMIT SWITCHES
24CE/924CE Series
Miniature Safety
Electromechanical
Switches
Actuators
For position sensing and switching applications requiring direct acting, positive opening contacts
the 24CE and 924CE ranges are ideal. They have been tested and approved to meet the requirements
of the Low Voltage directive and positive opening safety contacts per IEC/EN 60947-5-1-3. The
devices are CE marked. The red colour clearly differentiates this safety component in the application.
The 924CE range also has UL and CSA approval.
It is possible for the end user to enhance the safety level of these switches from Category 1 on their
own to Categories 2, 3 or 4 when the switches are used in conjunction with our wide range of FF-SR
safety relays to form a safety system.
Potential applications for these switches could use the roller plunger 24CE2- or 24CE3- style in
conjunction with cams on doors with hinges; or our fixed side rotary 24CE16- style for detection of
sliding doors. Also available are a range of panel mounting or top mounting versions to ensure that
small space or difficult mounting can be simply achieved.
Several contact arrangements are available.
Mechanical life:
10 million
Sealing:
standard type: IP66; with boot seal type: IP67
Operating temperature:
24CE
0 °C to 70 °C [32 °F to 158 °F]
Low temperature: -40 °C [-40 °F]
924CE
0 °C to 105 °C [32 °F to 221 °F]
Approvals:
24CE
CE
AC15 B300
DC13 R300
924CE
CSA, CE
per UL file #E41859, 10 A 250 Vac; 1/3 Hp 125-250 Vac
AC15 B300
DC13 R300
Connection:
Harmonised CENELEC 3 or 5 x 0,75 mm2 cable (24CE)
SJTO 3 or 5 x 18 AWG cable (924CE)
Contacts:
Silver
Switching options:
924CE
24CE
Slow action contacts (1NC)
black
red
blue
brown
green
green/yellow
Slow action contacts (1NC/1NO), Break Before Make (BBM)
black
red
Zb
white
blue
brown
green
green/yellow
Zb
white
black
black
Slow action contacts (1NC/1NO), Make Before Break (MBB)
black
blue
red
white
brown
green
Zb
green/yellow
Zb
black
white
Electrical ratings:
& Utilization
.Designation
....
Category
AC15
B300
DC13
R300
black
IEC 60947-5-1/EN 60947-5-1
Rated operational current le (A)
at rated operational voltage Ue
120 V 240 V 380 V 480 V 500 V 600 V
3
1.5
125 V 250 V
0,22
0,1
40 / max.
1.58
16 / max.
0.63
25 /
0.98
Free position
2 Holes 5,1 dia
Counter Bored 10,2 dia x 6 deep
(both sides - option 'A' only)
49 / max.
1.93
8/
0.32
1NC: 8,4 /
.33
1NC/1NO: 9,5 /
.374
26
www.honeywell.com/sensing
Side exit cable
(Option 'A')
Note: connector versions also available
VA
rating
Make
Break
3600
360
28
28
COMPACT LIMIT SWITCHES
24CE/924CE Series
OPTIONS
Side rotary
OT
Top pin plunger, boot sealed
PT
PT
DT
DT
ø7,1
Top roller plunger, parallel
ø12,4
OT
30,3 max.
24,3 max.
North America/Global
North America/Global
CABLE LENGTH CONTACT
6 ft
1NC/1NO, BBM
North America/Global
CABLE LENGTH
3 ft
9 ft
3 ft
3 ft
9 ft
CONTACT
1NC, BBM
1NC, BBM
1NC, MBB
1NC
1NC
CAT. LISTING
924CE16-S3
924CE16-S9
924CE16-T3
924CE16-Y3
924CE16-Y9
CONTACT
1NC/1NO, BBM
1NC
1NC
CAT. LISTING
24CE16-S1
24CE16-Y1
24CE16-Y6
CAT. LISTING
924CE18-S6
Adjustable plunger
Europe
CABLE LENGTH
1m
1m
6m
OPTION
side exit
side exit
CAT. LISTING
924CE2-S15
924CE2-S21
924CE2-S3
924CE2-S6
924CE2-S6A
924CE2-S9
924CE2-T25
924CE2-T25A
924CE2-T3
924CE2-T6
924CE2-T9
924CE2-Y3
924CE2-Y9
Europe
CABLE LENGTH CONTACT
3 ft
1NC/1NO, BBM
ø10
CONTACT
1NC, BBM
1NC, BBM
1NC, BBM
1NC, BBM
1NC, BBM
1NC, BBM
1NC, MBB
1NC, MBB
1NC, MBB
1NC, MBB
1NC, MBB
1NC
1NC
OP
North America/Global
Top pin plunger
CABLE LENGTH
15 ft
21 ft
3 ft
6 ft
6 ft
9 ft
25 ft
25 ft
3 ft
6 ft
9 ft
3 ft
9 ft
OPTION
CAT. LISTING
low temperature 924CE19-S3L1
17,5 max.
CABLE LENGTH
1m
2m
2m
2m
3m
6m
2m
1m
2m
2m
4m
6m
CONTACT
1NC/1NO, BBM
1NC/1NO, BBM
1NC/1NO, BBM
1NC/1NO, BBM
1NC/1NO, BBM
1NC/1NO, BBM
1NC/1NO, MBB
1NC
1NC
1NC
1NC
1NC
OPTION
CAT. LISTING
24CE2-S1
24CE2-S2
side exit
24CE2-S2A
low temperature 24CE2-S2B
24CE2-S3
24CE2-S6
24CE2-T2
24CE2-Y1
24CE2-Y2
side exit
24CE2-Y2A
24CE2-Y4
side exit
24CE2-Y6A
North America/Global
CABLE LENGTH
3 ft
6 ft
9 ft
25 ft
3 ft
3 ft
6 ft
9 ft
9 ft
3 ft
9 ft
CONTACT
1NC, BBM
1NC, BBM
1NC, BBM
1NC, MBB
1NC, MBB
1NC, MBB
1NC, MBB
1NC, MBB
1NC, MBB
1NC
1NC
OPTION
CONTACT
1NC/1NO, BBM
1NC/1NO, BBM
1NC/1NO, BBM
1NC/1NO, BBM
1NC/1NO, BBM
1NC/1NO, BBM
1NC
1NC
1NC
OPTION
CAT. LISTING
low temperature 24CE1-S12B
24CE1-S2
side exit
24CE1-S2A
low temperature 24CE1-S2B
24CE1-S3
24CE1-S6
side exit
24CE1-Y1A
24CE1-Y2
24CE1-Y3
side exit
side exit
side exit
side exit
CAT. LISTING
924CE1-S3
924CE1-S6
924CE1-S9
924CE1-T25A
924CE1-T3
924CE1-T3A
924CE1-T6A
924CE1-T9
924CE1-T9A
924CE1-Y3
924CE1-Y9
Europe
CABLE LENGTH
12 m
2m
2m
2m
3m
6m
1m
2m
3m
www.honeywell.com/sensing
27
COMPACT LIMIT SWITCHES
Top roller plunger, parallel,
boot sealed
Top roller plunger, perpendicular
ø12,4
ø12,4
30,3 max.
36,1 max.
North America/Global
North America/Global
CABLE LENGTH
6 ft
20 ft
3 ft
Y3L1
CONTACT
1NC, BBM
1NC
1NC
OPTION
CAT. LISTING
924CE31-S6
924CE31-Y20
low temperature 924CE31-
CABLE LENGTH
3 ft
6 ft
9 ft
9 ft
CONTACT
1NC, BBM
1NC, BBM
1NC, BBM
1NC, MBB
CAT. LISTING
924CE3-S3
924CE3-S6
924CE3-S9
924CE3-T9
CONTACT
1NC/1NO, BBM
1NC
1NC
CAT. LISTING
24CE3-S2
24CE3-Y1
24CE3-Y2
Europe
Europe
CABLE LENGTH
1m
2m
2m
5m
1m
2m
3m
CONTACT
1NC/1NO, BBM
1NC/1NO, BBM
1NC/1NO, BBM
1NC/1NO, BBM
1NC
1NC
1NC
OPTION
CAT. LISTING
24CE31-S1
24CE31-S2
low temperature 24CE31-S2B
24CE31-S5
24CE31-Y1
24CE31-Y2
24CE31-Y3
CABLE LENGTH
2m
1m
2m
Top roller plunger,
perpendicular, boot sealed
ø12,4
Top roller plunger, parallel,
panel mounted
36,1 max.
27,7
(1.75)
Europe
CABLE LENGTH
1m
2m
1m
North America/Global
CABLE LENGTH CONTACT
15 ft
1NC, BBM
CONTACT
1NC/1NO, BBM
1NC/1NO, BBM
1NC
CAT. LISTING
24CE55-S1
24CE55-S2
24CE55-Y1
CAT. LISTING
924CE28-S15
Europe
CABLE LENGTH CONTACT
2m
1NC/1NO, BBM
28
CAT. LISTING
24CE28-S2
www.honeywell.com/sensing
COMPACT LIMIT SWITCHES
LS Series
Compact Limit
Switches
LS Series compact limit switches are carefully designed for enhanced repeatability under the most stringent
conditions. Compact size and field adjustable features greatly extend the flexibility of these switches. Heads may
be positioned at 90° increments. Side rotary models can be adjusted for clockwise and/or counter-clockwise
operation. Actuators can be set and locked in any position through 360°.
The rugged housings and actuator heads are constructed from cast aluminium, capable of withstanding
physical abuse. Protection against oil, water and dust is achieved by O-ring seals on the actuator shaft; a ring
seal between head and body; and a seated compression seal between cover and case.
The LS fits in many places too small for any other fully adjustable limit switch.
Conduit:
½ in - 14 NPT
20 mm
NEMA 1, 3, 4, 6, 13
IP67
-29 °C to 71 °C [-20 °F to 160 °F]
-29 °C to 121 °C [-20 °F to 250 °F]
UL, CSA
Silver Cadmium Oxide (1)
Fine Silver
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
Sealing:
½ in - 14 NPT conduit
20 mm conduit
Operating temperature:
Standard
High
Approvals:
LS-L
Contacts:
Electrical ratings A, B, C, D, E
Electrical ratings F, G
Switching options:
SPDT
Actuators
Electrical ratings:
4
3
1
2
A
10 A, 120, 240 or 480 Vac; 1/3 hp, 120 Vac; ¾ hp, 240 Vac;
0.8 A, 115 Vdc**; 0.4 A, 230 Vdc;** 0.1 A, 550 Vdc;**
Pilot Duty, 600 Vac max.
B
10 A, 120, 240 or 480 Vac; ¼ hp, 120 Vac; ½ hp, 240 Vac.
Pilot Duty, 600 Vac max.
C
10 A, 120 Vac; 1/3 hp, 120 Vac.
D
10 A, 120, 240, 480 Vac; ¼ hp, 120 Vac; ½ hp, 240 Vac;
0.8 A, 115 Vdc**; 0.4 A, 230 Vdc**; 0.1 A, 550 Vdc**;
Pilot Duty, 600 Vac max.
E
10 A, 120, 240 or 480 Vac; 1/3 hp, 120 Vac; ¾ hp, 240 Vac.
Pilot Duty, 600 Vac max.
F
UL Rating:
10 A, 125, 250, or 480 Vac; 1/3 hp, 125 Vac; ¾ hp, 250 Vac;
0.8 A, 125 Vdc**; 0.4 A, 250 Vdc**
G
UL Rating:
10 A, 125, 250 or 480 Vac; ¼ hp, 125 Vac; ½ hp, 250 Vac;
0.8 A, 125 Vdc**; 0.4 A, 250 Vdc**
**
Resistive rating
(1)
Designed for use with inductive loads such as relays, contactors, motors and solenoids. Honeywell does not
recommend the use of silver cadmium oxide switch contacts in non-arcing loads. Non-arcing loads are
generally loads less than 12 volts and/or 0.5 amp.
www.honeywell.com/sensing
29
COMPACT LIMIT SWITCHES
LS Series
Side rotary actuated switches
OPTIONS
Adjustable roller lever
Fixed length lever
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT)
Differential travel max. (DT):
Switching options:
Lever:
Standard
Low
Standard
Low
13,3 N [3.0 lb]
5,0 N [18 oz]
20°
5°
30°
Standard
12°
Low
4°
SPDT
Aluminium, steel roller
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT)
Differential travel max. (DT):
20 mm
20 mm
Low PT/OF
Low PT
Low PT
20 mm
High temperature
High temperature 20 mm
Indicator light
Low OF
30
ELECTRICAL RATING
A
F
A
B
B
B
A
A
C
A
CAT. LISTING
1LS1
1LS1-L
1LS1-4C
1LS131
1LS19
1LS19-4C
1LS243
1LS243-4C
1LS501
1LS6
Standard
Low
Switching options:
Lever:
CONDUIT
CONDUIT
Standard
Low
Standard
Low
Low PT
Low OF/PT/DT
www.honeywell.com/sensing
ELECTRICAL RATING
A
F
A
B
B
13,3 N [3.0 lb]
5,0 N [18 oz]
20°
5°
30°
12°
4°
SPDT
Aluminium, nylon roller
CAT. LISTING
1LS3
1LS3-L
1LS3-4C
1LS58
1LS59
COMPACT LIMIT SWITCHES
No lever
Note: Levers for are ordered separately
(see pages 71-73 for details)
Adjustable rod
Operating force max. (OF):
Pretravel max. (PT):
Operating force max. (OF):
Standard
Low with standard PT
Low with low PT
Pretravel max. (PT):
Standard
Low
Maintained contact
Overtravel min. (OT)
Standard
Maintained contact
Differential travel max. (DT):
Standard
Low PT
Maintained contact
Switching options:
0,51 N m [4.5 in
lb]
0,21 N m [30 in oz]
0,11 N m [1 in lb]
20°
5°
55°
30°
35°
12°
4°
20°
SPDT
Maintained contact
Overtravel min. (OT)
Differential travel max. (DT):
Standard
Low
Standard
Low
Standard
Low
Switching options:
Lever:
CONDUIT
20 mm
Low PT
Low PT/OF/DT
ELECTRICAL RATING
A
F
A
B
B
1,39 N [5 oz]
0,83 Nm [3 oz]
20°
5°
30°
12°
4°
SPDT
Aluminium rod
CAT. LISTING
1LS10
1LS10-L
1LS10-4C
1LS47
1LS53
SPDT contact
CONDUIT
20 mm
Low OF
Low OF/PT
Low PT
ELECTRICAL RATING
A
F
A
A
B
B
CAT. LISTING
1LS2
1LS2-L
1LS2-4C
1LS23
1LS56
1LS9
Maintained contact
CONDUIT
ELECTRICAL RATING
A
F
Side rotary, yoke lever, maintained contact
Operating force max. (OF):
8,9 N [2.0 lb]
Pretravel max. (PT):
55°
Switching options:
Maintained
Lever:
6LS1Steel rollers on opposite sides of arm
6LS3 Nylon rollers on same side of arm
CAT. LISTING
6LS2
6LS2-L
CONDUIT
20 mm
www.honeywell.com/sensing
ELECTRICAL RATING
A
A
A
CAT. LISTING
6LS1
6LS1-4C
6LS3
31
COMPACT LIMIT SWITCHES
LS Series
Plunger actuated switches
OPTIONS
Top pin plunger
Side pin plunger
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT)
Differential travel max. (DT):
Standard
Low
Standard
Low
Standard
Low
Switching options:
31,14 N [7 lb]
10 N [36 oz]
1,65 mm [0.065 in]
6,35 mm [0.25 in]
5,56 mm [0.219 in]
0,51 mm [0.020 in]
0,23 mm [0.009 in]
SPDT
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT)
Differential travel max. (DT):
Switching options:
CONDUIT
20 mm
CONDUIT
20 mm
Low OF/OT/DT
ELECTRICAL RATING
A
F
A
E
CAT. LISTING
2LS1
2LS1-L
2LS1-4C
2LS111
31,14 N [7 lb]
1,65 mm [0.065 in]
5,56 mm [0.219 in]
0,51 mm [0.020 in]
SPDT
Differential travel max. (DT):
Switching options:
CONDUIT
CONDUIT
20 mm
32
ELECTRICAL RATING
A
F
A
CAT. LISTING
5LS1
5LS1-L
5LS1-4C
CAT. LISTING
4LS1
4LS1-4C
Side roller plunger
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT)
Top roller plunger
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT)
Differential travel max. (DT):
Switching options:
ELECTRICAL RATING
A
A
40,03 N [9 lb]
2,8 mm [0.110 in]
6,35 mm [0.25 in]
1,02 mm [0.040 in]
SPDT
20 mm
www.honeywell.com/sensing
ELECTRICAL RATING
A
A
40,03 N [9 lb]
2,8 mm [0.110 in]
5,56 mm [0.219
in]
1,02 mm [0.040
in]
SPDT
CAT. LISTING
3LS1
3LS1-4C
COMPACT LIMIT SWITCHES
Wobble actuated switches
These switches will operate by moving actuator in
any direction except direct pull.
Operating force max. (OF):
Pretravel max. (PT):
1,39 N [5 oz]
28,6 mm [1,125
in]
SPDT
Switching options:
OPTIONS
Coil spring
Flexible cable
Ø 6,17 ±0.08
(0.264 ±0.003)
Ø 4,80 ±0.08
(0.189 ±0.003)
141,0 ±2,54
(5,550 ±0.10)
141,0 ±2,54
(5,550 ±0.10)
CONDUIT
CONDUIT
20 mm
ELECTRICAL RATING
D
G
D
CAT. LISTING
8LS1
8LS1-L
8LS1-4C
20 mm
ELECTRICAL RATING
D
D
CAT. LISTING
8LS152
8LS152-4C
Steel wire
Operating force max. (OF):
Pretravel max. (PT):
Spring rod
0,28 N [1 oz]
63,5 mm [2.5 in]
191,3
(7.53)
CONDUIT
20 mm
CONDUIT
20 mm
ELECTRICAL RATING
D
D
ELECTRICAL RATING
D
D
CAT. LISTING
8LS125
8LS125-4C
CAT. LISTING
8LS3
8LS3-4C
www.honeywell.com/sensing
33
PRECISION LIMIT SWITCHES
BF Series
Plastic
Enclosed Basic
Switches
BF Series Plastic Enclosed Basic Switches are available with a wide variety of actuators, and are designed for easy
mounting and wiring. BF switches are designed to allow mounting with the cover either towards or away from the
mounting surface.
Switches with lever type actuators are adjustable in two directions. The entire actuator can be rotated around its
mounting bushing, and the angle of the lever can also be changed.
Sealing:
Operating temperature:
Approvals:
Termination:
Contacts:
Electrical ratings:
NEMA 1, 3, 4, 13
-32 °C to 71 °C [-25 °F to 160 °F]
UL
½ in - 14NPT
Silver
11 A - 125 Vac, 250 Vac or 277 Vac
5 A - 125 Vac, 250 Vac or 277 Vac
A
B
Switching options:
SPDT
Single Pole, Double Throw,
Snap action contacts (1NC/1NO)
Actuators
Plunger actuated switches
OPTIONS
Top roller arm, adjustable
Top pin plunger
14,3
0.56
18,3
0.72
,9
39 7
1.5
Ø 7,1 Max.
0.28
23,1
0.91 Max.
17,5
0.69
65,28
2.57
44,5
1.75
4,9
9,5
0.19 0.38
34
73,6
2.90
44,5
1.75
58,7
2.31
73,5
2.89
15,5 35,1
0.61 1.38
Conduit thread
4,9
9,5
0.19 0.38
Operating force max. (OF):
Differential travel max. (DT):
ACTUATOR POSITION
Left
Right
17,5
0.69
15,5 35,1
0.61 1.38
12,23 N [44 oz]
0,64 mm [0.025 in]
ELECTRICAL RATING
B
B
CAT. LISTING
BFL1-BP1
BFR1-BP1
58,7
2.31
73,5
2.89
Operating force max. (OF):
Differential travel max. (DT):
ACTUATOR POSITION
Left
Right
www.honeywell.com/sensing
10,56 N [38 oz]
1,65 mm [0.065 in]
ELECTRICAL RATING
B
B
CAT. LISTING
BFL1-BL1
BFR1-BL1
PRECISION LIMIT SWITCHES
Plunger actuated switches
(continued)
Wobble actuated switches
Operating force max. (OF):
1,95 N [7 oz]
OPTIONS
Top roller arm, adjustable, one
way
Coil spring
Spring wire
14,3
0.56
14,3
0.56
Ø 7,1 Max.
0.28
Ø 1,02
0.05
39
1.5 ,6
6
19,05
0.75
18,3
0.72
32,26
1.27
180˚
168,8
6.65
17,5
0.69
73,6
2.90
44,5
1.75
35,1
1.38
Ø 15,5
0.61
169,9
6.69
14,73
0.58
58,7
2.31
ACTUATOR
POSITION
Left
Right
ELECTRICAL
RATING
B
B
CAT. LISTING
35,1
1.38
44,5
1.75
58,7
2.31
73,5
2.89
4,9
9,5
0.19 0.38
3,61 N [13 oz]
10,56 N [38 oz]
17,5
0.69
15,5 35,1
0.61 1.38
44,5
1.75
4,9
9,5 0.19
0.38
73,5
2.89
Operating force max. (OF):
Left
Right
17,5
0.69
4,9
9,5
0.19 0.38
14,7 15,5
0.58 0.61
58,7
2.31
73,5
2.89
ACTUATOR
POSITION
Left
Left
Right
ELECTRICAL
RATING
A
B
B
CAT. LISTING
BFL1-AW1
BFL1-BW1
BFR1-BW1
BFL1-BL3
BFR1-BL3
ACTUATOR
POSITION
Left
Right
ELECTRICAL
RATING
B
B
CAT. LISTING
BFL1-BW4
BFR1-BW4
Plastic
14,3
0.56
Ø 7,1
0.28
Low force rod
250˚
18,3
0.72
17,5
0.69
73,6
2.90
44,5
1.75
4,9
0.19
35,1
1.38
9,5
0.38
14,73
0.58
58,7
2.31
249,25
9.81
Ø 15,5
0.61
73,5
2.89
17,5
0.69
Operating force max. (OF):
Left
Right
ACTUATOR
POSITION
Left
Right
ELECTRICAL
RATING
B
B
10,56 N [38 oz]
3,61 N [13 oz]
44,5
1.75
35,1
1.38
CAT. LISTING
BFL1-BL2
BFR1-BL2
4,9
0.19
9,5
0.38
15,5
0.61
58,7
2.31
C
73,5
2.89
Type -BW3
ACTUATOR
POSITION
Left,
179,3 mm [7.06 in] length rod
Left,
249,25 mm [9.8 in] length rod
ELECTRICAL
A
CAT. LISTING
RATING
BFL1-AW2
B
BFL1-BW3
www.honeywell.com/sensing
35
PRECISION LIMIT SWITCHES
BZE/DTE Series
Compact Enclosed
Switches
The BZE/DTE Series general purpose enclosed limit switches offer enhanced precision operation
and sturdy actuation in a compact but rugged metal housing. The large wiring enclosure means
that the user can get access to wire the device simply. The switch incorporates high repeatability of
the switch point early in the travel of the switch. This is achieved through a very tolerant over-travel
mechanism aimed at reducing the effect of the application drift and the long-term accuracy of the
switch.
Conduit:
Sealing:
Operating temperature:
E6
V6
Standard
Low
Approvals:
Contacts:
Actuators
Electrical ratings A, B, C
Electrical rating D
Switching options:
SPDT
DPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
Double Pole, Double Throw
Snap action contacts (2NC/2NO)
Electrical ratings:
A
UL/CSA Rating:
36
½ in - 14 NPT
NEMA 1
NEMA 1, 3
-32 °C to 71 °C [-25 °F to 160 °F]
-40 °C to 71°C [-40 °F to 160 °F]
UL, CSA, CE
Silver
Gold
15 A, 125, 250 or 480 Vac:
2 A, 600 Vac:
1
/8 Hp, 125 Vac: ¼ Hp, 250 Vac:
½ A, 125 Vdc: ¼ A, 250 Vdc
B
UL/CSA Rating:
10 A, 125 or 250 Vac:
0.3 A, 125 Vdc: 0.15 A, 250 Vdc
C
UL/CSA Rating:
15 A, 125, 250 or 480 Vac;
¼ Hp, 125 Vac; ½ Hp, 250 Vac;
½ A, 125 Vdc; ¼ A, 250 Vdc
D
UL/CSA Rating:
1 A - 125 Vac
www.honeywell.com/sensing
PRECISION LIMIT SWITCHES
E6/V6
E6 (side mount) and V6 (flange mount) switches are offered with or without actuator seal boots. Both have a combination insulator/ seal cemented
inside the bottom enclosure. Lead washers are used to seal the mounting holes on side mount switches. All side mount switches are installed with #6
screws, except the BZE6-2RN7 (#8 screws). Removal of the bottom enclosure exposes the terminals for easy wiring.
Momentary contact
Top roller plunger, parallel
23,4
(0.92)
OPTIONS
56,6 OP
(2,23)
Top pin plunger
2,0 REF
(0.08)
23,4
(0.92)
25,4
(1.00)
25,4
(1.00)
10,6
(0.42)
Ø 8,4
(0.33)
63,5
OP
(2.50)
25,4
(1.00)
25,4
(1.00)
25,4
(1.00)
1/2-14 NPT
Threads
22,6
(0.89)
77,2
(3.04)
21,1
(0.83)
41,4
(1.63)
25,4
(1.00)
54,1
(2.13)
Flange mount
without boot seal
Side mount
with boot seal
With boot seal
25,4
(1.0)
22,6
(0.89)
Side mount
22,6
(0.89)
69,6
(2.740)
25,4
(1.00)
77,2
(3.04)
Side mount
without boot seal
With boot seal
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Operating force max. (OF):SPDT Standard 2,50 N to 6,67 N [9 oz to 24 oz]
SPDT Low temperature 4,17 N to 10,84 N [15 oz to 39 oz]
DPDT 6,95 N to 16,4 N [25 oz to 59 oz]
Pretravel max. (PT):
SPDT
1,98 mm [0.078 in]
DPDT
2,8 mm [0.110 in]
Overtravel min. (OT):
SPDT
5,56 mm [0.219 in]
DPDT
3,18 mm [0.125 in]
Differential travel max. (DT):
SPDT
0.05 mm [0.002 in]
DPDT
1,52 mm [0.060 in]
Ø
15,75
(0.62)
19,0
(0.75)
Side mount
with boot seal
4,3 Ø (2)
(0.17)
44,4
(1.75)
22,6
(0.89)
77,2
(3.04)
OP 49,61
(1.953)
1/2-14 NPT
Threads
19,0
(0.75)
Ø 8,4
(0.33)
1/2-14 NPT
Threads
43,7 OP
(1.72)
19,0
(0.75)
12,7 (0.50) Ø
X
4,6 (0.18)
Wide Roller
12,7 (0.50) Ø
X
4,6 (0.18) W
Roller
Differential travel max. (DT):
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
2,50 N to 6,67 N [9 oz to 24 oz]
5,56 N to 13,34 N [20 oz to 48 oz]
1,98 mm [0.078 in]
2,8 mm [0.110 in]
5,56 mm [0.219 in]
3,18 mm [0.125 in]
0,01 mm to 0,05 mm
[0.0004 in to 0.0020 in]
1,52 mm [0.060 in]
Side mount
CONTACT
SPDT
DPDT
ELECTRICAL RATING
A
B
CAT. LISTING
BZE6-2RN80
DTE6-2RN80
ELECTRICAL RATING
A
CAT. LISTING
BZV6-2RN80
Flange mount
Low temperature/High OF
#8 screws
Gold contacts
CONTACT
SPDT
DPDT
SPDT
SPDT
SPDT
ELECTRICAL RATING
A
B
A
A
D
CAT. LISTING
BZE6-2RN
DTE6-2RN
BZE6-2RN34
BZE6-2RN7
BZE6-2RN72
CONTACT
SPDT
CONDUIT
Without boot seal
Flange mount
Operating force max. (OF):
CONTACT
SPDT
DPDT
ELECTRICAL RATING
A
B
CAT. LISTING
BZV6-2RN
DTV6-2RN
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
Without boot seal
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
2,50 N to 3,61 N [9 oz to 13 oz]
5,56 N to 11,12 N [20 oz to 40 oz]
0,38 mm [0.015 in]
3,81 mm [0.150 in]
5,56 mm [0.219 in]
2,24 mm [0.088 in]
0,05 mm [0.002 in]
1,52 mm [0.060 in]
CONTACT
SPDT
DPDT
ELECTRICAL RATING
A
B
CAT. LISTING
BZE6-2RQ
DTE6-2RQ
ELECTRICAL RATING
A
CAT. LISTING
BZV6-2RQ
2,50 N to 3,61 N [9 oz to 13 oz]
6,67 N to 13,34 N [24oz to 48 oz]
0,38 mm [0.015 in]
3,58 mm [0.141 in]
3,55 mm [0.140 in]
3,18 mm [0.125 in]
0,05 mm [0.002 in]
1,52 mm [0.060 in]
Side mount
CONTACT
SPDT
Field adjustable roller SPDT
Field adjustable roller DPDT
CONDUIT
ELECTRICAL RATING
A
A
B
CAT. LISTING
BZE6-2RQ8
BZE6-2RQ9
DTE6-2RQ9
CONDUIT
ELECTRICAL RATING
A
CAT. LISTING
BZV6-2RQ8
Flange mount
CONTACT
SPDT
Side mount
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
Flange mount
CONTACT
SPDT
www.honeywell.com/sensing
37
PRECISION LIMIT SWITCHES
BZE/DTE Series
E6/V6 Momentary contact (continued)
Top roller plunger, perpendicular
Roller arm, adjustable
12,7 (0.50) Ø
X
4,6 (0.18) W
Roller
56,6 OP
(2,23)
19,0
(0.75)
25,4
(1.00)
25,4
(1.00)
22,6
(0.89)
77,2
(3.04)
Side mount
with boot seal
Flange mount
without boot seal
With boot seal
Operating Force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
2,60 N to 6,67 N [9 oz to 24 oz]
1,98 mm [0.078 in]
5,56 mm [0.219 in]
0,01 mm to 0,05 mm
[0.0004 in to 0.0020 in]
Side mount
CONTACT
SPDT
ELECTRICAL RATING
A
CAT. LISTING
BZE6-2RN81
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
2,50 N to 3,61 N [9 oz to 13 oz]
6,67 N to 13,34 N [24 oz to 48 oz]
0,38 mm [0.015 in]
3,58 mm [0.141 in]
3,55 mm [0.140 in]
3,18 mm [0.125 in]
0,05 mm [0.002 in]
1,52 mm [0.060 in]
Side mount
CONTACT
SPDT
DPDT
Flange mount
with boot seal
Operating temperature: Standard
Low
Roller:
-32 °C to 71 °C [-25 °F to 160 °F]
-40 °C to 71 °C [-40 °F to 160 °F]
Steel
With boot seal
Operating Force max. (OF):
2,78 N to 5,56 N [10 oz to 20
Pretravel max. (PT):
4,78 mm [0.188
Overtravel min. (OT):
5,56 mm [0.219
Differential travel max. (DT): SPDT
0,15 mm [0.006
DPDT
4,19 mm [0.165
oz]
in]
in]
in]
in]
Side mount
Without boot seal
Operating Force max. (OF):
Side mount
without boot seal
ELECTRICAL RATING
A
B
CAT. LISTING
BZE6-2RQ81
DTE6-2RQ81
ELECTRICAL RATING
A
CAT. LISTING
BZV6-2RQ81
Operating Force max. (OF):
Pretravel max. (PT):
Low temperature
DPDT
DPDT
CONTACT
SPDT
DPDT
SPDT
13,34 N [48 oz]
7,92 mm [0.312 in]
ELECTRICAL RATING
A
B
A
CAT. LISTING
BZE6-2RN2
DTE6-2RN2
BZE6-2RN234
Flange mount
Operating Force max. (OF):
Pretravel max. (PT):
CONTACT
SPDT
DPDT
DPDT
DPDT
2,78 N to 8,34 N [10 oz to 30 oz]
6,76 mm [0.266 in]
ELECTRICAL RATING
A
B
CAT. LISTING
BZV6-2RN2
DTV6-2RN2
Flange mount
CONTACT
SPDT
Without boot seal
Operating Force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
Side mount
Flange mount
38
CONTACT
SPDT
SPDT
www.honeywell.com/sensing
2,78 N to 5,00 N [10 oz to 20
4,78 mm [0.188
5,56 mm [0.219
0,15 mm [0.006
ELECTRICAL RATING
A
A
CAT. LISTING
BZE6-2RQ2
BZV6-2RQ2
oz]
in]
in]
in]
PRECISION LIMIT SWITCHES
One way roller lever
Manual palm button
36,6
1.44
18,3
0.72
38,1
1.50
31,8
1.25
1/2 - 14 NPSM
5 THREADS MIN
78,5
3.09
4,3
Ø (2)
0.17
44,4
1.75
22,6
0.89
77,2
3.04
Side mount
with boot seal
Side mount
with boot seal
With boot seal
Operating Force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
CONTACT
SPDT
Side mount
41,4
1.63
25,4
1.00
54,1
2.13
With boot seal
2,22 N to 5,56 N
5,94
5,56
0,15
ELECTRICAL RATING
A
[8 oz to 20
mm [0.234
mm [0.219
mm [0.006
oz]
in]
in]
in]
CAT. LISTING
BZE6-2RN28
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
Flange mount
Rod lever
CONTACT
SPDT
2,78 N to 5,56 N [10 oz to 20 oz]
4,78 mm [0.188 in]
5,56 mm [0.219 in]
0,15 mm [0.006 in]
ELECTRICAL RATING
A
CAT. LISTING
BZV6-2RN4
Wobble, coil spring
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
18,24 mm [0.718 in]
21,29 mm [0.838 in]
5,82 mm [0.229 in]
These switches will operate by moving actuator in any direction except direct
pull.
152,4
(6.0)
18,29
(0.72)
250˚
53,19
(2.09)
Ø 15,75
(0.62)
19,05
(0.75)
25,4
(1.00)
22,6
(0.89)
69,60
(2,74)
77,2
(3.04)
Flange mount
without boot seal
With boot seal
With boot seal
Operating force max. (OF):
Side mount
Flange mount
CONTACT
SPDT
SPDT
Flange mount
with boot seal
Side mount
with boot seal
0,83 N to 1,95 N [3 oz to 7 oz]
ELECTRICAL RATING
A
A
CAT. LISTING
BZE6-2RN62
BZV6-2RN62
Operating force max. (OF):
Pretravel max. (PT):
Side mount
Flange mount
CONTACT
SPDT
SPDT
1,95 N [7 oz]
15°
ELECTRICAL RATING
A
A
CAT. LISTING
BZE6-2RN18
BZV6-2RN18
Without boot seal
Operating force max. (OF):
Side mount
Flange mount
CONTACT
SPDT
SPDT
0,56 N to 1,39 N [2 oz to 5 oz]
ELECTRICAL RATING
A
A
CAT. LISTING
BZE6-2RQ62
BZV6-2RQ62
www.honeywell.com/sensing
39
PRECISION LIMIT SWITCHES
BZE/DTE Series
E6/V6 Maintained contact (reset) switches
The switches shown below provide maintained contact after the
operating force on either top or bottom plunger is released.
Note: The top plungers on these switches provide enhanced accuracy
and uniform operation than the “reset” plungers and should be used
when closely held operating characteristics are required.
Switching:
SPDT
Single Pole, Double Throw
(1NC/1NO) Maintained
OPTIONS
Top pin plunger
Roller arm, adjustable
Side mount
with boot seal
Flange mount
without boot seal
Side mount
Operating force max. (OF): With boot seal 1,67 N to 5,56 N [6 oz to 20 oz]
Without boot seal 1,67 N to 2,64 N [6 oz to 9.5 oz]
Pretravel max. (PT):
With boot seal
1,98 mm [0.078 in]
Without boot seal
0.30 mm [0.012 in]
Overtravel min. (OT):
4,75 mm [0.187 in]
CONTACT
SPDT Maintained
SPDT Maintained
With boot seal
Without boot seal
ELECTRICAL RATING
C
C
CAT. LISTING
BZE6-RNX1
BZE6-RQX2
Flange mount
with boot seal
Side mount
Operating Force max. (OF): With boot seal
Without boot seal
Pretravel max. (PT):
Overtravel min. (OT):
CONTACT
With boot seal
Without boot seal
CONDUIT
Maintained
Maintained
Top roller plunger
Ø 12,7 (0.50) x 4,6 (0.18)
Wide roller
56,69
(2.232)
53,19
(2.094)
Reset
FP
19,0
(0.75)
Ø 15,75
(0.62)
25,4
(1.00)
22,6
(0.89)
Ø 25,4
(1.0)
14,22
(0.56)
Side mount
with boot seal
40,08
(1.58)
23,19
(0.913)
Side mount
without boot seal
69,59
(2.74)
Side mount
Operating force max. (OF): With boot seal 3,34 N to 15,57 N [12 oz to 56 oz]
Without boot seal 1,67 N to 2,64 N [6 oz to 9.5 oz]
Pretravel max. (PT):
With boot seal
1,98 mm [0.078 in]
Without boot seal
0,30 mm [0.012 in]
Overtravel min. (OT):
With boot seal
4,75 mm [0.187 in]
Without boot seal
3,55 mm [0.140 in]
CONTACT
With boot seal
Without boot seal
40
CONDUIT
SPDT
SPDT
ELECTRICAL RATING
C
C
Side mount
without boot seal
CAT. LISTING
BZE6-RN80X2
BZE6-RQ8X2
www.honeywell.com/sensing
ELECTRICAL RATING
C
C
4,45 N [16 oz]
3,34 N [12 oz]
4,78 mm [0.188 in]
5,56 mm [0.219 in]
CAT. LISTING
BZE6-RN2X1
BZE6-RQ2X2
PRECISION LIMIT SWITCHES
E7 Metal standard enclosed switch
Mechanical life:
Sealing:
Without boot seal
With boot seal
Operating temperature:
Approvals:
10 million
IP50 Standard
IP65 Sealed
-30 °C to 70 °C [-22 °F to 158 °F]
IEC 60947-5-1
EN 60947-5-1
Switching options:
SPDT
Actuators
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
Top roller plunger, perpendicular, without boot seal
DPDT
Double Pole, Double Throw
Snap action contacts (2NC/2NO)
0,38
(0.015)
Pretravel
Ø 12,7 x 4,57 Wide roller
(0.50 x 0.18)
44,53
OP
(1.75)
13,97
(0.55)
25,4
(1.00)
Ø 14,73
(0.58)
5,84
(0.23)
OPTIONS
4,06
(0.16)
CONTACT
SPDT
CONDUIT
PG 13.5
12,7
(0.50)
76,40
(3,01)
ELECTRICAL RATING
CAT. LISTING
BZE7-2RQ81-PG
Top pin plunger
With boot seal
1,93
(0.076)
Pretravel
Top roller lever, boot seal
Ø 8,38
(0.33)
Ø 19,05 x 7,92 wide roller
(Ø 0.75 x 0.312)
39,88
(1.57)
38,58 OP
(1.519)
18,29
(0.72)
25,4
(1.00)
Ø 14,73
(0.58)
5,84
(0.23)
CONTACT
SPDT
SPDT
DPDT
4,06
(0.16)
CONDUIT
PG 13.5
20 mm
PG 13.5
76,40
(3,01)
48,11
(1.894)
13,97
(0.55)
12,7
(0.50)
25,4
(1.00)
ELECTRICAL RATING
CAT. LISTING
BZE7-2RN-PG
BZE7-2RN-C
DTE7-2RN-PG
Ø 14,73
(0.58)
5,84
(0.23)
CONTACT
SPDT
SPDT
Without boot seal
CONTACT
SPDT
24,38
(0.91)
225˚
13,97
(0.55)
CONDUIT
PG 13.5
ELECTRICAL RATING
4,06
(0.16)
CONDUIT
PG 13.5
20 mm
76,40
(3,01)
12,7
(0.50)
ELECTRICAL RATING
CAT. LISTING
BZE7-2RN2-PG
BZE7-2RN2-C
CAT. LISTING
BZE7-2RQ-PG
Wobble, coil spring, boot seal
Top roller plunger, parallel, without boot seal
3,8
(0.15)
Pretravel
Ø 12,7 x 4,5 wide roller
(Ø 0.50 x 0.18)
151,13
(5.95)
44,5
OP
(1.75)
13,97
(0.55)
13,97
(0.55)
25,4
(1.00)
25,4
(1.00)
Ø 14,73
(0.58)
5,84
(0.23)
CONTACT
SPDT
4,06
(0.16)
CONDUIT
PG 13.5
76,40
(3,01)
5,84
(0.23)
12,7
(0.50)
ELECTRICAL RATING
Ø 14,73
(0.58)
CAT. LISTING
BZE7-2RQ8-PG
CONTACT
SPDT
www.honeywell.com/sensing
4,06
(0.16)
CONDUIT
PG 13.5
76,40
(3,01)
12,7
(0.50)
ELECTRICAL RATING
CAT. LISTING
BZE7-2RN18-PG
41
PRECISION LIMIT SWITCHES
The BAF/DTF Series is available with or without boot seals. The
elastomer boot on sealed actuator versions protects the actuating
mechanism and the internal basic switch from contamination. They are
therefore potentially suitable for wash-down applications. Both sealed
and unsealed versions are available with the actuators on the right or left
hand side.
BAF/DTF
Series
High Capacity
Enclosed
Switches
The cover plate is removable to allow ease of wiring and switch
replacement without having to dismount the housing.
The BAF/DTF Series is potentially suitable for use in packaging
equipment, farm machinery, conveyors, overhead cranes and hoists.
Actuators
Approvals:
Sealing:
Operating temperature:
Conduit:
Contacts:
Electrical ratings:
B
D
Switching options:
D
SPDT
UL, CSA
NEMA 1, 3, 4, 13
-2RQ9
NEMA 1
-32 °C to 71 °C [-25 °F to 160 °F]
½ in - 14 NPT
Silver
UL/CSA Rating:
10 A, 125 or 250 Vac;
0.3 A, 125 Vdc; 0.15
A, 250 Vdc.
Momentary contact
OPTIONS
Top pin plunger
UL/CSA Rating: 20 A, 125, 250 or 480 Vac;
1 Hp, 125 Vac; 2 Hp, 250 Vac;
½ A, 125 Vdc; ¼ A, 250 Vdc;
Lamp Load - 10 A, 125 Vac.
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
Left-hand
Right-hand
*28,2
on DTF2 Types
1.11
With boot seal
B
DPDT
Double Pole, Double Throw
Snap action contacts (2NC/2NO)
Operating force max. (OF): BAF/DTF
Pretravel max. (PT):
BAF
DTF
Overtravel min. (OT):
BAF
DTF
Differential travel max. (DT):
BAF
DTF
Operating position (OP):
BAF
DTF
ACTUATOR POSITION
Right
Left
Right
Left
42
CONTACT
SPDT
SPDT
DPDT
DPDT
www.honeywell.com/sensing
2,39
3,59
5,56
3,96
0,26
1,53
53,19
52,07
ELECTRICAL RATING
D
D
B
B
11,2 N [2.5
mm [0.094
mm [0.141
mm [0.219
mm [0.156
mm [0.010
mm [0.060
mm [2.094
mm [2.050
CAT. LISTING
BAF1-2RN-RH
BAF1-2RN-LH
DTF2-2RN-RH
DTF2-2RN-LH
lb]
in]
in]
in]
in]
in]
in]
in]
in]
PRECISION LIMIT SWITCHES
Momentary contact (continued)
Roller arm, adjustable
Top roller plunger, parallel
Right-hand
Left-hand
*28,2
on DTF2 Types
1.11
O-ring actuator seal
Operating force max. (OF): BAF/DTF
Pretravel max. (PT):
BAF/DTF
Overtravel min. (OT):
BAF
DTF
Differential travel max. (DT): BAF
DTF
Operating position (OP):
BAF
DTF
ACTUATOR POSITION
Right
Left
Right
Left
CONTACT
SPDT
SPDT
DPDT
DPDT
35,6 N [8.0
3,18 mm [0.125
4,75 mm [0.187
3,18 mm [0.125
0,19 mm [0.0075
1,53 mm [0.060
64,69 mm [2.547
63,88 mm [2.515
ELECTRICAL RATING
D
D
B
B
lb]
in]
in]
in]
in]
in]
in]
in]
CAT. LISTING
BAF1-2RQN8-RH
BAF1-2RQN8-LH
DTF2-2RQN8-RH
DTF2-2RQN8-LH
Adjustable 360° horizontally
ACTUATOR POSITION
Right
Left
Right
Left
CONTACT
SPDT
SPDT
DPDT
DPDT
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
ACTUATOR POSITION
Right
Left
Right
Right
Field adjustable roller plunger
Operating force max. (OF): BAF/DTF
Pretravel max. (PT):
BAF
DTF
Overtravel min. (OT):
BAF
DTF
Differential travel max. (DT): BAF
DTF
Operating position (OP):
BAF
DTF
With boot seal
2,39
3,18
3,96
3,18
0,26
1,53
64,69
63,88
ELECTRICAL RATING
D
D
B
B
11,2 N [2.5
mm [0.094
mm [0.125
mm [0.156
mm [0.125
mm [0.010
mm [0.060
mm [2.547
mm [2.515
lb]
in]
in]
in]
in]
in]
in]
in]
in]
CONTACT
SPDT
SPDT
DPDT
DPDT
BAF
DTF
BAF
DTF
BAF
DTF
BAF
DTF
ELECTRICAL RATING
D
D
B
B
8,90 N [2.0
11,1 N [2.5
5,56 mm [0.219
7,93 mm [0.312
6,35 mm [0.25
5,56 mm [0.219
0,51 mm [0.020
3,05 mm [0.120
lb]
lb]
in]
in]
in]
in]
in]
in]
CAT. LISTING
BAF1-2RN2-RH
BAF1-2RN2-LH
DTF2-2RN2-RH
DTF2-2RN2-LH
One way roller lever
CAT. LISTING
BAF1-2RQ9-RH
BAF1-2RQ9-LH
DTF2-2RQ9-RH
DTF2-2RQ9-LH
With boot seal
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
ACTUATOR POSITION CONTACT
Right
SPDT
Left
SPDT
www.honeywell.com/sensing
8,90 N [2.0
5,56 mm [0.219
6,35 mm [0.25
0,51 mm [0.020
ELECTRICAL RATING
D
D
lb]
in]
in]
in]
CAT. LISTING
BAF1-2RN28-RH
BAF1-2RN28-LH
43
PRECISION LIMIT SWITCHES
BAF/DTF Series
Momentary contact (continued)
Maintained contact (reset) switches
Manual palm button
Top pin plunger
Right-hand
Left-hand
*28,2
on DTF2 Types
1.11
With boot seal
With boot seal
Operating force max. (OF):
ACTUATOR POSITION CONTACT
Right
SPDT
Left
SPDT
8,90 N [2.0 lb]
ELECTRICAL RATING
D
D
CAT. LISTING
BAF1-2RN4-RH
BAF1-2RN4-LH
Wobble, coil spring
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
ACTUATOR POSITION CONTACT
Right
Maintained SPDT
ELECTRICAL RATING
D
CAT. LISTING
BAF1-3RNX1
Roller arm, adjustable
Left-hand
Right-hand
With boot seal
Pretravel max. (PT):
ACTUATOR POSITION CONTACT
Right
SPDT
Left
SPDT
7,79 N [1.75 lb]
2,39 mm [0.094 in]
5,56 mm [0.219 in]
82,6
(3.25)
101,6
(4.00)
15°
ELECTRICAL RATING
D
D
CAT. LISTING
BAF1-2RN18-RH
BAF1-2RN18-LH
With boot seals on roller arm and plunger
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Operating position (OP):
ACTUATOR POSITION CONTACT
Right
Maintained SPDT
Left
Maintained SPDT
44
www.honeywell.com/sensing
6,67 N [1.5
5,56 mm [0.219
6,35 mm [0.25
60,71 mm [2.390
ELECTRICAL RATING
D
D
CAT. LISTING
BAF1-3RN2X-RH
BAF1-3RN2X-LH
lb]
in]
in]
in]
PRECISION LIMIT SWITCHES
Wobble, coil spring
32,5
(1.28)
Ø 7,1
(0.28)
158,5
(6.24)
1/2-14 NPT
Threads
Ø 6,9
(3)
(0.27)
27,4
(1.08)
20,6
(0.81)
41,4
(1.63)
27,4
(1.08)
82,6
(3.25)
101,6
(4.00)
With boot seals on wobble stick and plunger
Pretravel max. (PT):
ACTUATOR POSITION CONTACT
Right
Maintained SPDT
15°
ELECTRICAL RATING
D
CAT. LISTING
BAF1-3CN18X1
www.honeywell.com/sensing
45
HEAVY DUTY LIMIT SWITCHES
HDLS Series
Heavy Duty Limit
Switches
The HDLS Series Heavy Duty Limit Switches offer a wide choice of mounting and actuator options.
Housed in a rugged, die-cast zinc body, the switch is epoxy coated for protection. Potential
applications include harsh duty environments where conventional limit switches may not be used.
Versatile and full featured, they are designed for long life.
Listings referenced in this section are mainly standard. Low temperature and fluorocarbon (FC,
high temperature) construction is available in all forms of HDLS limit switches. For temperature
ranges see table opposite. Also available are factory sealed, pre-wired switches.
Low temperature switches have fluorosilicone diaphragm, shaft seals and external boot seal
(where applicable) plus a low temperature lubricant. If prewired with cable, temperature limits are 10 °C [14 °F] flex and -30 °C [22 °F] no flex.
To order a low temperature version insert the additional letters Y and B as in the following example:
LSA1A - standard side rotary plug-in switch
LSYAB1A - low temperature version.
Completely fluorocarbon (FC) sealed, high temperature, chemical resistance switches have a
full FC body gasket covering the switch cavity. Rotary types have an extra FC seal on the operating
shaft, while plunger versions have FC boot seals. They are for use in potential applications where
the environment includes fire-resistant synthetic fluids. The additional FC seals also promote
enhanced operating life for rotary actuacted HDLS switches in applications where the temperatures
are normally -12 °C to 121 °C [10 °F to 250 °F]. If prewired with cable, temperature limits are
105 °C [221 °F] dry and 60 °C [140 °F] wet.
To order a fluorocarbon (FC) sealed switch insert the additional letters Y and C as in the following
example:
LSA1A - standard side rotary plug-in switch
LSYAC1A - completely FC sealed version.
Actuators
Factory sealed, pre-wired limit switches have the entry area completely sealed and are available
with 6 ft [1,83 m], STOOW-A cable or 4, 5 or 9-pin connectors. NEMA ratings are, for cable
version 1, 4, 6, 6P, 12, for connector version 1, 4, 6, 6P, 12, 13.
To order a factory sealed switch add the appropriate letter:
Circuitry
only)
Cable
½ in Connector (available with ½ in conduit tap
SPDT
C
A (4 pin mini)
B (5 pin mini)
Levers: Levers for side rotary
types are ordered separately (see
pages 71-73 for details)
DD (4 pin micro)
DPDT
M (¾ in only)
R (9 pin)
Example:
LSA1AC - LSA1A with 6 ft of 5 conductor STOOW-A cable
LSJ2BM-7N - LSJ2B-7N with 6 ft of 9 conductor STOOW-A cable
LSA1AB - LSA1A with 5 pin receptable
LSA1ADD - 4 pin micro-change connector
Electrical ratings
10 amps continuous carry. Circuits on any one pole must be the same polarity.
ac Volts
Pilot duty: 600 Vac, 720 VA
A
SPDT
NEMA
A600
B
DPDT
NEMA
B600
C
SPDT/DPDT
Amps at 0.35 Power Factor
Vac
Make
Break
120
60
6
240
30
3
480
15
1.5
600
12
1.2
120
30
3
240
15
1.5
480
7.5
0.75
600
6
0.60
250 Vac or 60 Vdc, 0.050 amp max.
dc Volts
Pilot duty: 240 Vdc, 30 watts
A
SPDT
B
DPDT
C
SPDT/DPDT
46
Make and Break Amps
Vdc
Inductive
120
0.25
240
0.15
120
0.25
240
0.15
250 Vac or 60 Vdc, 0.050 amp max.
www.honeywell.com/sensing
Resistive
0.8
0.4
0.8
0.4
HEAVY DUTY LIMIT SWITCHES
Operating temperatures
Environmental
seal
performance
www.honeywell.com/sensing
47
HEAVY DUTY LIMIT SWITCHES
HDLS Series Side rotary actuated switches
Levers: Levers for side rotary types are ordered separately (see
pages 69-71 for details)
Sealing
IP67, 68 (except preleaded versions)
NEMA 1, 3, 4, 4X, 6, 6P, 12, 13
UL, CSA, CE, CCC
Operating force (Newton meters, N m/in lb):
LSA, LSL, LSM, LSM, LSP, LSU
LSH, LSR
Conduit:
Contacts:
Electrical ratings A, B
Electrical rating C
Switching options:
SPDT
0,45 N m
max.
4 in lb max.
0,19 N m max.
1.7 in lb max
½ in - 14 NPT
Silver
Gold
Snap action contacts
Side rotary, momentary action
The momentary action listings shown are factory
assembled with the head adjusted for both
clockwise (CW) and counterclockwise (CCW)
operation. The shaft of side rotary heads face the
front (label side of switch).
Actuation direction
A simple field adjustment converts switch to
accept actuation from one or both directions. For
ready reference, adjustment instructions are cast
into the internal lid of side rotary heads.
DPDT
SPDT Double Break
DPDT Double Break
Head orientation
The head may be orientated and locked in any
of four 90° positions.
Momentary action switches can be factory
assembled for operation in one direction only
and/or with the shaft facing the rear or either
side. Contact Honeywell for more information.
48
www.honeywell.com/sensing
HEAVY DUTY LIMIT SWITCHES
OPTIONS
Low differential, low torque
Standard
Pretravel:
Differential travel:
Pretravel:
Differential travel:
SPDT
DPDT
Overtravel:
15° max.
5° max.
7° max.
60° min.
Plug in
CONTACT CONDUIT
SPDT
SPDT
DPDT
¾ in
DPDT
DPDT
SPDT
20 mm
DPDT
20 mm
ELECTRICAL RATING
A
C
B
B
C
A
B
CAT. LISTING
LSA1A
LSA1E
LSA2B
LSA6B
LSA6S
LS4A1A
LS4A2B
Non plug in
CONTACT CONDUIT
SPDT
DPDT
¾ in
SPDT
20 mm
ELECTRICAL RATING
A
B
A
CAT. LISTING
LSA3K
LSA4L
LS4A3K
SPDT
DPDT
Overtravel:
9° max.
3° max.
4° max.
66° min.
Plug in
CONTACT
SPDT
SPDT
DPDT
DPDT
DPDT
Overtravel:
ELECTRICAL RATING
A
C
B
B
C
CAT. LISTING
LSP1A
LSP1E
LSP2B
LSP6B
LSP6S
ELECTRICAL RATING
A
B
CAT. LISTING
LSP3K
LSP4L
9° max.
3° max.
4° max.
66° min.
Plug in
CONTACT CONDUIT
SPDT
SPDT
DPDT
¾ in
DPDT
DPDT
ELECTRICAL RATING
A
C
B
B
C
CAT. LISTING
LSH1A
LSH1E
LSH2B
LSH6B
LSH6S
Non plug in
CONTACT CONDUIT
SPDT
DPDT
¾ in
ELECTRICAL RATING
A
B
CAT. LISTING
LSH3K
LSH4L
5° Pretravel
Pretravel:
Differential travel:
SPDT
DPDT
Overtravel:
Low differential travel
Pretravel:
Differential travel:
SPDT
DPDT
Side rotary, additional circuitry/
action
OPTIONS
Sequential
One pole operates before the other in each
direction, with 10° lever travel between
operations.
Pretravel:
1st pole 15° max.
2nd pole additional 10° max.
Differential travel:
Each pole 5° max.
Overtravel:
48° min.
Switching options:
5° max.
3° max.
4° max.
70° min.
Plug in
CONTACT CONDUIT
SPDT
SPDT
DPDT
¾ in
DPDT
DPDT
ELECTRICAL RATING
A
C
B
B
C
CAT. LISTING
LSU1A
LSU1E
LSU2B
LSU6B
LSU6S
ELECTRICAL RATING
A
B
CAT. LISTING
LSU3K
LSU4L
(2) SPDT Double Bread
with 10˚ between operation
Plug in
CONTACT CONDUIT
DPDT
¾ in
DPDT
ELECTRICAL RATING
B
B
CAT. LISTING
LSL2C
LSL6C
ELECTRICAL RATING
B
B
CAT. LISTING
LSL4M
LSL7M
Non plug in
CONTACT CONDUIT
SPDT
DPDT
¾ in
Non plug in
CONTACT CONDUIT
SPDT
DPDT
¾ in
The following listings, sequential, centre neutral
and maintained switches, are assembled with
the operating shaft facing front. The user can
position and lock the head with the shaft to rear
or either side. They can also be factory
assembled with the shaft to rear or either side.
Contact Honeywell for more information.
Non plug in
CONTACT CONDUIT
DPDT
¾ in
DPDT
Centre neutral
One pole operates on clockwise rotation, the
other on counterclockwise rotation.
Low torque
Pretravel:
Differential travel:
SPDT
DPDT
Overtravel:
Pretravel:
Differential travel:
Overtravel:
Switching options:
15° max.
5° max.
7° max.
60° min.
18° max.
10° max.
57° min.
Plug in
CONTACT CONDUIT
SPDT
SPDT
DPDT
¾ in
DPDT
DPDT
ELECTRICAL RATING
A
C
B
B
C
CAT. LISTING
LSR1A
LSR1E
LSR2B
LSR6B
LSR6S
SPDT Double Break each direction
Plug in
CONTACT CONDUIT
DPDT
¾ in
SPDT
20 mm
DPDT
Non plug in
CONTACT CONDUIT
SPDT
DPDT
¾ in
ELECTRICAL RATING
A
B
CAT. LISTING
LSR3K
LSR4L
ELECTRICAL RATING
B
B
B
CAT. LISTING
LSM2D
LS4M2D
LSM6D
ELECTRICAL RATING
B
B
CAT. LISTING
LSM4N
LSM7N
Non plug in
CONTACT CONDUIT
DPDT
¾ in
DPDT
www.honeywell.com/sensing
49
HEAVY DUTY LIMIT SWITCHES
HDLS Series
Side rotary actuated
switches (continued)
Plunger actuated switches
Maintained contact, 2 position
Operation is maintained on counterclockwise
rotation, reset on clockwise rotation and vice
versa.
Pretravel:
Differential travel:
Overtravel:
Switching options:
SPDT
65° max.
40° max.
20° min.
DPDT
HDLS plunger actuated switches are available
with either top or side facing plungers for
application flexibility. Switches with adjustable
plungers simplify installation. They have a hex
setscrew and locknut on the plunger, providing an
adjustment range of 0.25 in [6,35 mm].
Assembled conditions
The listing shown are factory assembled with side
plungers facing front (label side of switch); rollers
on side plungers are in horizontal position.
Rollers on top plunger switches are parallel to
mounting surface. Other options are available.
Contact Honeywell for more information.
Approvals:
SPDT Double Break
Maintained
DPDT Double Break
Maintained
NEMA 1, 3, 4, 4X, 6, 6P, 12, 13
UL, CSA, CE
½ in - 14 NPT
Conduit:
Contacts:
Electrical ratings A, B
Electrical rating C
Switching options:
SPDT
Silver
Gold
Snap action contacts
DPDT
Plug in
CONTACT
SPDT
DPDT
ELECTRICAL RATING
A
B
CAT. LISTING
LSN1A
LSN6B
ELECTRICAL RATING
A
B
CAT. LISTING
LSN3K
LSN7L
Non plug in
CONTACT
SPDT
DPDT
Top roller plunger
Operating point:
Plug in
CONTACT
SPDT
SPDT
DPDT
DPDT
DPDT Double Break
ELECTRICAL RATING
A
C
B
C
CAT. LISTING
LSD1A
LSD1E
LSD6B
LSD6S
ELECTRICAL RATING
A
B
CAT. LISTING
LSD3K
LSD7L
Non plug in
CONTACT
SPDT
DPDT
SPDT Double Break
55,9 mm ± 1,02
2,20 in ± 0.040
Adjustable plunger
Top plungers, momentary action
Pretravel:
Differential travel:
SPDT
DPDT
Overtravel:
Operating force:
1,78 mm [0.07 in] max.
0,38 mm [0.015 in] max.
0,51 mm [0.02 in] max.
4,83 mm [0.19 in] min.
17,8 N m [4 lb] max.
OPTIONS
Operating point:
Top pin plunger
Plug in
CONTACT
SPDT
SPDT
DPDT
DPDT
53,0 mm to 59,3 mm
2.085 in to 2.335 in
ELECTRICAL RATING
A
C
B
C
CAT. LISTING
LSV1A
LSV1E
LSV6B
LSV6S
ELECTRICAL RATING
A
B
CAT. LISTING
LSV3K
LSV7L
Non plug in
Operating point:
45,8 mm ± 0,76
1.805 in ± 0.030
Plug in
CONTACT
SPDT
SPDT
DPDT
DPDT
ELECTRICAL RATING
A
C
B
C
CAT. LISTING
LSC1A
LSC1E
LSC6B
LSC6S
ELECTRICAL RATING
A
B
CAT. LISTING
LSC3K
LSC7L
Non plug in
CONTACT
SPDT
DPDT
50
www.honeywell.com/sensing
CONTACT
SPDT
DPDT
HEAVY DUTY LIMIT SWITCHES
Side plungers, momentary action
Pretravel:
Differential travel:
SPDT
DPDT
Overtravel:
Operating force:
Side roller plunger
Side plunger, maintained
circuitry
2,54 mm [0.100 in] max.
0,64 mm [0.025 in] max.
0,89 mm [0.035 in] max.
4,83 mm [0.19 in] min.
26,7 N m [6 lb] max.
OPTIONS
Side pin plunger
Operating point:
39,6
1.56
Plug in
14,7
.58
CONTACT
SPDT
SPDT
DPDT
DPDT
20,3
31,37 .80
1.24
Operating point:
33 mm ± 0,76
1.300 in ± 0.030
Plug in
CONTACT
SPDT
SPDT
DPDT
DPDT
44,1 mm ± 1,02
1.735 in ± 0.040
ELECTRICAL RATING
A
C
B
C
CAT. LISTING
LSE1A
LSE1E
LSE6B
LSE6S
ELECTRICAL RATING
A
B
CAT. LISTING
LSE3K
LSE7L
ELECTRICAL RATING
A
C
B
C
CAT. LISTING
LSF1A
LSF1E
LSF6B
LSF6S
ELECTRICAL RATING
A
B
CAT. LISTING
LSF3K
LSF7L
Non plug in
CONTACT
SPDT
DPDT
LSG contact transfer is maintained after either
plunger is operated. Operation of other plunger
resets switch.
Pretravel:
4,32 mm [0.170 in] max.
Differential travel:
SPDT
2,29 mm [0.090 in] max.
DPDT
2,29 mm [0.090 in] max.
Overtravel:
2,00 mm [0.0.80 in] max.
Operating force:
44,5 N m [10 lb] min.
Operating point:
37,6 ± 0,76 mm
1.48 ± 0.030 in
Switching options:
SPDT
DPDT
Non plug in
CONTACT
SPDT
DPDT
Plug in
CONTACT
SPDT
SPDT
DPDT
DPDT
Adjustable side pin plunger
ELECTRICAL RATING
A
C
B
C
CAT. LISTING
LSG1A
LSG1E
LSG6B
LSG6S
ELECTRICAL RATING
A
B
CAT. LISTING
LSG3K
LSG7L
Non plug in
CONTACT
SPDT
DPDT
Operating point:
41,0 mm to 47,4 mm
1.615 in to 1.865 in
Plug in
CONTACT
SPDT
SPDT
DPDT
DPDT
ELECTRICAL RATING
A
C
B
C
CAT. LISTING
LSW1A
LSW1E
LSW6B
LSW6S
ELECTRICAL RATING
A
B
CAT. LISTING
LSW3K
LSW7L
Non plug in
CONTACT
SPDT
DPDT
www.honeywell.com/sensing
51
HEAVY DUTY LIMIT SWITCHES
HDLS Series
Wobble actuated switches
Momentary action wobble actuated switches
have flexible levers which may be operated with
any movement, except direct pull.
Approvals:
Spring wire
Cat whisker
NEMA 1, 3, 4, 4X, 6, 6P, 12, 13
UL, CSA, CE
½ in - 14 NPT
Conduit:
Contacts:
Electrical ratings A, B
Switching options:
SPDT
Silver
Snap action contacts
DPDT
Pretravel (approx) (Radius):
Operating force:
SPDT Double Break
DPDT Double Break
Plastic rod
Pretravel (approx) (Radius): 51,0 mm [2.0 in]
Operating force:
1,39 N [5.0 oz] max.
Plug in
CONTACT
SPDT
DPDT
OPTIONS
102,0 mm [4.0 in]
1,39 g [5 oz] max.
ELECTRICAL RATING
A
B
CAT. LISTING
LSJ1A-7M
LSJ6B-7M
CONTACT
SPDT
DPDT
Non plug in
CONTACT
SPDT
DPDT
Plug in
ELECTRICAL RATING
A
B
CAT. LISTING
LSJ3K-7M
LSJ7L-7M
ELECTRICAL RATING
A
B
CAT. LISTING
LSK1A-8A
LSK6B-8A
ELECTRICAL RATING
A
B
CAT. LISTING
LSK3K-8A
LSK7L-8A
Non plug in
CONTACT
SPDT
DPDT
Cable
Coil spring
Pretravel (approx) (Radius): 25,4 mm [1.0 in]
Operating force:
2,78 g [10 oz] max.
Plug in
CONTACT
SPDT
DPDT
ELECTRICAL RATING
A
B
CAT. LISTING
LSJ1A-7A
LSJ6B-7A
Pretravel (approx) (Radius): 38,0 mm [1.5 in]
Operating force:
1,95 N [7.0 oz] max.
Non plug in
CONTACT
SPDT
DPDT
ELECTRICAL RATING
A
B
CAT. LISTING
LSJ3K-7A
LSJ7L-7A
Pretravel (approx) (Radius): 51,0 mm [2.0 in]
Operating force:
1,95 N [7.0 oz] max.
Plug in
CONTACT
SPDT
DPDT
ELECTRICAL RATING
A
B
CAT. LISTING
LSJ1A-7N
LSJ6B-7N
CONTACT
SPDT
DPDT
Non plug in
CONTACT
SPDT
DPDT
Plug in
ELECTRICAL RATING
A
B
CAT. LISTING
LSJ3K-7N
LSJ7L-7N
www.honeywell.com/sensing
CAT. LISTING
LSK1A-8C
LSK6B-8C
ELECTRICAL RATING
A
B
CAT. LISTING
LSK3K-8C
LSK7L-8C
Non plug in
CONTACT
SPDT
DPDT
52
ELECTRICAL RATING
A
B
HEAVY DUTY LIMIT SWITCHES
Fully potted HDLS
Fully potted HDLS are designed to meet the
demanding requirements of NEMA 1, 3, 4, 6, 6P
and 13 for wet applications where the integrity of
the conduit seal must be assured. These
switches are the same as the standard HDLS non
plug in limit switch except that the conduit
entrance is factory sealed to simplify installation
and ensure integrity of the conduit seal. They are
epoxy filled and supplied with six feet of 5 or 9
conductor 16 gauge STO cable. Fully potted
HDLS are built with all Fluorocarbon seals.
Sealing exceeds Nema 6P. Low temperature
versions are available, see page 46 for
temperature range and how to order.
41,1
1.62
14,7
0.58
NEMA 1, 4, 6, 6P, 12, 13
NEMA 1, 4, 6, 6P, 12
UL, CSA, CE, CCC
Operating temperature:
Cable versions
-12 °C to 105 °C
10 °F to 221 °F
Connector versions
-12 °C to 121 °C
10 °F to 250 °F
Cable length:
3,658 m [12 ft]
Contacts:
Electrical ratings A, B Silver
Switching options:
Snap action contacts
SPDT
DPDT
39,6
1.56
59,4
2.34
Levers: Levers for side rotary
types are ordered separately (see
pages 71-73 for details)
OPTIONS
Standard
Pretravel:
Differential travel:
70,4
2.77
CONTACT
SPDT
DPDT
SPDT
DPDT
Wiring diagrams:
Single-Pole
5,2
0.20 Ø Mtg holes
(2)
Side rotary actuated
switches
Overtravel:
Operating force:
25,4
1.00 36,6
1.44
19,0
0.75
106,7
4.20
Approvals:
Connector
Cable
Numbers = Connectors
Colours = Cables
Double-Pole
29,4
1.16
10-32 UNF tapped
from rear only (2)
TERMINATION
Cable
Cable
5-pin Connector
9-pin Connector
Mtg pads
7,32
0.29
Actuators
ELECTRICAL RATING
A
B
A
B
CAT. LISTING
LSYAC3KP-FP
LSYAC4LX-FP
LSYAC3KQ-FP
LSYAC7LR-FP
Low differential travel
Pretravel:
Differential travel:
Overtravel:
Operating force:
62,0
2.44
15° max.
5° max.
7° max.
60° min.
0,45 N m [4 in lb] max.
SPDT
DPDT
CONTACT
SPDT
DPDT
SPDT
DPDT
TERMINATION
Cable
Cable
5-pin Connector
9-pin Connector
9° max.
3° max.
4° max.
66° min.
0,45 N m [4 in lb] max.
SPDT
DPDT
ELECTRICAL RATING
A
B
A
B
CAT. LISTING
LSYPC3KP-FP
LSYPC4LX-FP
LSYPC3KQ-FP
LSYPC7LR-FP
74,9
2.95
5° Pretravel
Pretravel:
Differential travel:
Overtravel:
Operating force:
1/2-14 NPT
20,3
0.80
39,0
1.54
44,4
1.75
5° max.
3° max.
70° min.
0,45 N m [4 in lb] max.
SPDT
CONTACT TERMINATION
ELECTRICAL RATING CAT. LISTING
SPDT
Cable
A
LSYUC3KP-FP
SPDT
5-pin Connector A
LSYUC3KQ-FP
For low temperature versions
substitute “Y_B” for “Y_C”
www.honeywell.com/sensing
53
HEAVY DUTY LIMIT SWITCHES
Fully potted HDLS
(continued)
Side rotary actuated
switches
Sequential
Pretravel:
1st pole 15° max.
2nd pole additional 10° max.
Differential travel:
Each pole 5° max.
Overtravel:
48° max.
Operating force:
0,45 N m [4 in lb] max.
Switching options:
DPDT
Plunger actuated switches
OPTIONS
Top plungers
Pretravel:
Differential travel:
SPDT
DPDT
Overtravel:
Operating force:
1,78 mm [0.07 in] max.
0,38 mm [0.015 in] max.
0,51 mm [0.02 in] max.
4,83 mm [0.19 in] min.
17,8 N m [4 lb] max.
Top pin plunger
CONTACT
SPDT
DPDT
SPDT
DPDT
TERMINATION
Cable
Cable
5-pin Connector
9-pin Connector
ELECTRICAL RATING
A
B
A
B
CAT. LISTING
LSYCC3KP-FP
LSYCC4LX-FP
LSYCC3KQ-FP
LSYCC7LR-FP
(2) SPDT Double Break
with 10˚ between operation
CONTACT TERMINATION
ELECTRICAL RATING CAT. LISTING
DPDT
Cable
B
LSYLC4MX-FP
DPDT
9-pin Connector B
LSYLC7MR-FP
CONTACT
SPDT
DPDT
SPDT
DPDT
Centre neutral
Pretravel:
Differential travel:
Overtravel:
Operating force:
Switching options:
Top roller plunger
18° max.
10° max.
57° min.
0,45 N m [4 in lb] max.
DPDT
TERMINATION
Cable
Cable
5-pin Connector
9-pin Connector
ELECTRICAL RATING
A
B
A
B
CAT. LISTING
LSYDC3KP-FP
LSYDC4LX-FP
LSYDC3KQ-FP
LSYDC7LR-FP
Side plungers
Pretravel:
Differential travel:
SPDT
DPDT
Overtravel:
Operating force:
2,54 mm [0.100 in] max.
0,38 mm [0.015 in] max.
0,51 mm [0.02 in] max.
4,83 mm [0.19 in] min.
26,7 N m [6 lb] max.
Side pin plunger
SPDT Double Break each direction
CONTACT TERMINATION
ELECTRICAL RATING CAT. LISTING
DPDT
Cable
B
LSYMC4NX-FP
DPDT
9-pin Connector B
LSYMC7NR-FP
CONTACT
SPDT
DPDT
SPDT
DPDT
TERMINATION
Cable
Cable
5-pin Connector
9-pin Connector
ELECTRICAL RATING
A
B
A
B
CAT. LISTING
LSYEC3KP-FP
LSYEC4LX-FP
LSYEC3KQ-FP
LSYEC7LR-FP
For low temperature versions
substitute “Y_B” for “Y_C”
54
www.honeywell.com/sensing
Wobble actuated switches
Actuator codes **:
7A
7M
8A
7N
8C
CONTACT TERMINATION
SPDT
DPDT
SPDT
DPDT
Cable
Cable
5-pin Connector
9-pin Connector
Delrin rod
Spring wire
Cat whisker
Cable
Coil spring
ELECTRICAL
RATING
A
B
A
B
Head style*
J
J
K
J
K
CAT. LISTING
LSY*C3KP-**FP
LSY*C4LX-**FP
LSY*C3KQ-**FP
LSY*C7LR-**FP
HEAVY DUTY LIMIT SWITCHES
Stainless steel
HDLS
Plunger actuated switches
Side rotary actuated
switches
OPTIONS
Top roller plunger
Pretravel:
Differential travel:
Overtravel:
Operating point:
HDLS stainless steel switches are designed for
use in highly corrosive environments such as
petro-chemical plants, food processing plants,
shipboard and dockside locations. The type
316 cast stainless steel body is designed to
minimise crevices where food particles could
become trapped. The actuator, operating
head and screws are also stainless steel. All
seals are Fluorocarbon to provide excellent
chemical resistance and to withstand operating
temperatures up to 121 °C [250 °F] and
pressurised steam cleaning.
CONTACT
SPDT
DPDT
CAT. LISTING
LS2D4K
LS2D4L
39,6
1.56
33,0
1.30
Operating
point
14,7
.58
NEMA 1, 3, 3R, 4, 4X, 6, 6P, 12,
13
UL, CSA, CE, CCC
Operating temperature:
-12 °C to 121 °C
10 °F to 250 °F
Contacts:
Electrical ratings A, B
Silver
Actuators
ELECTRICAL RATING
A
B
Side pin plunger
Approvals:
Levers: Levers for side rotary
types are ordered separately
(see pages 71-73 for details)
1,78 mm [0.07 in] max.
0,38 mm [0.015 in] max.
4,83 mm [019 in] min.
55,9 mm ± 1,02
2.20 in ± 0.04
20,3
31,37 .80
1.24
Pretravel:
Differential travel:
Overtravel:
Operating point:
OPTIONS
Standard
Pretravel:
Differential travel:
SPDT
DPDT
Overtravel:
CONTACT
SPDT
DPDT
ELECTRICAL RATING
A
B
15° max.
5° max.
7° max.
60° min
CAT. LISTING
LS2A4K
LS2A4L
SPDT
DPDT
Overtravel:
CONTACT
SPDT
DPDT
ELECTRICAL RATING
A
B
9° max.
3° max.
4° max.
60° min.
CAT. LISTING
LS2H4K
LS2H4L
Centre neutral
Pretravel:
Differential travel:
Overtravel:
CONTACT
DPDT
ELECTRICAL RATING
B
CONTACT
SPDT
DPDT
DPDT
18° max
10° max.
57° min.
9,4
0.37
2,54 mm [1.00 in] max.
0,64 mm [0.025 in] max.
4,83 mm [0.19 in] min.
33 mm ± 0,76
1.3 in ± 0.03
ELECTRICAL RATING
A
B
CAT. LISTING
LS2E4K
LS2E4L
Side roller plunger
47,7
1.88
39,6
1.56
4,8
0.19
Low Torque
Pretravel:
Differential travel:
19,0
0.75
21,6
0.85
44,2
1.74
Operating
point
14,7
0.58
19,1
0.75
Pretravel:
Differential travel:
Overtravel:
Operating point:
CONTACT
SPDT
DPDT
31,5
1.24
21,6
0.85
20,3
0.80
2,54 mm [1.00 in] max.
0,64 mm [0.025 in] max.
4,83 mm [0.19 in] min.
44,1 mm ± 1,02
1.73 in ± 0.04
ELECTRICAL RATING
A
B
CAT. LISTING
LS2F4K
LS2F4L
CAT. LISTING
LS2M4N
www.honeywell.com/sensing
55
56
www.honeywell.com/sensing
HAZARDOUS LOCATION SWITCHES
Hazardous location switches
Honeywell explosion proof switches are designed specifically for use in
hazardous locations. To comply with explosion-proof requirements, the
flame path within the housing is designed to contain and cool the
escaping hot gases that otherwise could cause an explosion outside the
switch.
Switches are available with UL/CSA for North America. See information
below and product pages for details. In Europe, the usage is governed under
the European Directive on Equipment and Protective Systems Intended for
Use in Potentially Explosive Atmospheres (94/9/EC) commonly referred to as
the ATEX Directive.
The BX, CX and GXE product families comply to the following ATEX Directive:
EExd IIC T6 Category II 2 GD
The 14CE100 product family complies to the following ATEX Directive:
EExd IIC T6 Category II 2 G
NEMA TYPE 7, CLASS I FLAMMABLE GASES OR VAPORS
Type 7 enclosures are for use indoors in locations classified as Class I,
Groups B, C, or D by the National Electrical Code.
Group B — (only switches so noted in the order guides include this listing).
Atmospheres containing hydrogen or manufactured gas.
Group C — atmospheres containing diethyl ether, ethylene, or cyclopropane.
Group D — Atmospheres containing gasoline, hexane, butane, naptha,
propane, acetone, toluene or isoprene.
Division 1
Locations in which hazardous agents are present under normal operating
conditions.
Division 2
Locations in which hazardous agents may be present only in case of
accidental rupture or breakdown.
All Honeywell listings covered in Division 1 are also covered in the same
groups in Division 2.
NEMA TYPE 9, CLASS II COMBUSTIBLE DUSTS
Type 9 enclosures are for use in indoor locations classified as Class II,
Groups E, F or G, as defined in the National Electrical Code.
Group E — Atmospheres containing metal dust.
Group F — Atmospheres containing carbon black, coal dust or coke dust.
Group G — Atmospheres containing flour, starch or grain dust.
ATEX EExd
EExd
II
Flameproof Places with potentially
enclosure
explosive
atmospheres, other
than mines susceptible
to fire damp
c
T6
Atmosphere may
contain gases
from groups A, B
or C from table in
EN50014, Annex A
Maximum
surface
temperature of
85 °C [185 °F]
Category II 2
Areas in which an
explosion proof
atmosphere is likely to
occur
www.honeywell.com/sensing
G
Gas
could be
present
D
Dust
could be
present
57
HAZARDOUS LOCATION SWITCHES
14CE100 Series
Miniature Enclosed,
Explosion Proof
X
ATEoved
Switches
r
p
p
a
The 14CE100 Series has been designed for use in explosive environments. It is approved to meet
the requirements of the Low Voltage directive and is CE marked. The prewired construction allows
for ease of installation where space is at a premium and external operating conditions can be
difficult.
Mechanical life:
Sealing:
10 million
IP65, NEMA 1, 3
IP67 , NEMA 1, 3, 4 12, 13
0 °C to 70 °C [32 °F to 158 °F]
CE, PTB 98 ATEX 1064 X EExd IIC T6 Category II 2 G
AC14 D300
DC13 R300
11,8 N max.
1,8 mm [0.71 in] max.
3,0 mm [0.118 in] min.
0,1mm [0.004 in] max.
Standard
Silver
-*G
Gold
Harmonised CENELEC 4 x 0,75 mm2 cable
Standard
Boot sealed
Operating temperature:
Approvals:
Operating force (OF):
Pretravel (PT):
Overtravel (OT):
Differential travel (DT):
Contacts:
Connection:
Switching options:
SPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
Actuators
S.P.D.T
BROWN
2
GREEN/YELLOW
BLUE
1
3
BLACK
Top pin plunger
40,0 Max.
1,57
25,0
1.00
M4 ground
screw
15,7 OP
0.62
Top roller plunger, parallel
16,0 Max.
0.63
1,8 PT
0.07
M4 ground
screw
40,0 Max.
1,57
25,0
1.00
M4 ground
screw
Ø 10,0 (0.39)
Stainless steel
plunger
(2) Ø 5,1 (0.20)
Mounting holes
49,0 Max.
1.93
31,4
1.24
1,8 PT
0.07
Ø 12,0 (0.47) x 5,0 (0.20)
Hardened steel roller
CAT. LISTING
14CE101-1
14CE101-2
14CE101-3
14CE101-4
14CE101-5
14CE101-6
14CE101-10
Boot sealed
1,80 Max.
(0.07) PT
72,0
2,83
31,4
1.24
49,0 Max.
1.93
CABLE LENGTH
1 m [3.3 ft]
3 m [9.9 ft]
3 m [9.9 ft]
Gold contacts
5 m [16.5 ft]
6 m [19.8 ft]
6 m [19.8 ft]
Gold contacts
8 m [26.4 ft]
12 m [39.6 ft]
15 m [49.5 ft]
14,0
0.55
31,4
1.24
49,0 Max.
1.93
7,6
0.30
"L"
CAT. LISTING
14CE102-1
14CE102-3
14CE102-3G
14CE102-5
14CE102-6
14CE102-6G
14CE102-8
14CE102-12
14CE102-15
Ø 7,1 (0.28)
Stainless steel
plunger
Neoprene boot seal
58
(2) Ø 5,1 (0.20)
Mounting holes
72,0
2,83
7,6
0.30
24,9
(0.98)
OP
CABLE LENGTH
1 m [3.3 ft]
6 m [19.8 ft]
10 m [33.0 ft]
1,8 PT
0.07
28,5 OP
1.11
"L"
CABLE LENGTH
1 m [3.3 ft]
2 m [6.6 ft]
3 m [9.9 ft]
4 m [13.2 ft]
5 m [16.5 ft]
6 m [19.8 ft]
10 m [33.0 ft]
16,0 Max.
0.63
(2) Ø 5,1 (0.20)
Mounting holes
7,6
0.30
"L"
40,0 Max.
1,57
25,0
1.00
16,0 Max.
0.63
28,5 OP
1.11
59,0
2.32
Top roller plunger, perpendicular
CAT. LISTING
14CE118-1
14CE118-6
14CE118-10
www.honeywell.com/sensing
CABLE LENGTH
1 m [3.3 ft]
3 m [9.9 ft]
CAT. LISTING
14CE103-1
14CE103-3
HAZARDOUS LOCATION SWITCHES
GXE Series
Explosion Proof
Limit Switches
X
ATEoved
r
app
The GXE Series explosion proof limit switches are designed specifically for use in hazardous
applications. The GXE enclosure is fully potted and has sealing protection of IP66/67 as per IEC/
EN 60529. The entire GXE Series complies with the European Directive on Equipment and
Protective Systems Intended for Use in Potentially Explosive Atmospheres (94/9/EC) commonly
referred to as the ATEX Directive.
Mechanical life:
Sealing:
Operating temperature:
Approvals:
2 million
IP66/67, EN 60529
-20 °C to 75 °C [-4 °F to 167 °F]
CE, EN 50014, EN 50018, EN 50281-1-1
KEMA 00 ATEX 2103 X EExd IIC T6 T85 Category II 2 GD
AC15
DC13
Silver
5 metre, HO5VV-F, 3 x 0,75 mm2 cable
Contacts:
Connection:
Switching options:
SPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
BLUE
BLACK
BROWN
Actuators
OPTIONS
GXE Series
Side rotary roller lever
Overtravel min. (OT):
Differential travel max. (DT):
Operating position max. (OP):
Top roller plunger, parallel
49°
8°
26°
CAT. LISTING
GXE51A1B
Operating force max. (OF):
Overtravel min. (OT):
6,0 mm [0.0.236 in]
Differential travel max. (DT):
0,5mm
[0.020 in]
Operating position max. (OP):
2,0 mm
[0.079 in]
CAT. LISTING
GXE51C
16 N [3.6 lb]
Top pin plunger
Overtravel min. (OT):
6,0 mm [0.0.236 in]
Differential travel max. (DT): 0,5mm [0.020
in]
Operating position max. (OP):2,0 mm [0.079
in]
CAT. LISTING
GXE51B
www.honeywell.com/sensing
59
HAZARDOUS LOCATION SWITCHES
EX Series
Standard
Explosion
Proof
Switches
The EX Series features the smallest UL listed housings available for use in
hazardous locations. Flame paths within the housing are designed to
cool exploding gases below the kindling temperature before they reach
the explosive gases surrounding the housing.
X
ATEoved
r
app
Options available include single or double conduit connection.
These switches are not sealed against liquids and should not be used
where there will be liquid splash. If a weather sealed explosion proof
switch is required please select from the CX or LSX/BX series.
Actuators
Sealing:
NEMA 1, 7 (Class I, Division I, Groups C, D)
9, (Class II, Division I, Groups E, F, G)
Operating temperature: Standard
-40 °C to 71 °C [-40 °F to 160 °F]
High
100 hr @ 400 °F
Approvals:
UL, CSA, KEMA 04ATEX2312X
Conduit:
½ in - 14NPT
Contacts:
Silver
Electrical ratings:
A
UL/CSA Rating:
15 A, 125, 250 or 480 Vac;
1
/8 Hp, 125 Vac; ¼ Hp, 250 Vac;
½ A, 125 Vdc; ¼ A, 250 Vdc.
B
UL/CSA Rating:
20 A, 125, 250 or 480 Vac;
10 A, 125 Vac “L”;
1 Hp, 125 Vac; 2 Hp, 250 Vac;
½ A, 125 Vdc; ¼ A, 250 Vdc.
C
UL/CSA Rating:
D
UL/CSA Rating:
10 A, 125 or 250 Vac;
0.3 A, 125 Vdc; 0.15 A, 250 Vdc
.
10 A, 125, 250 or 480 Vac;
½ A, 125 Vdc; ¼ A, 250 Vdc.
E
UL Rating:
Switching options:
SPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
1 A, 125 Vac.
DPDT
Double Pole, Double Throw
Snap action contacts (2NC/2NO)
Side rotary actuated switches
OPTIONS
No lever
Note: Levers are ordered separately
(see pages 71-73 for details)
Operating force max. (OF):
Electrical rating A
Electrical rating B
Pretravel max. (PT):
Overtravel max. (OT):
Electrical rating A
Electrical rating B
Differential travel max. (DT):
Electrical rating A
Electrical rating B
ACTUATION
CW
CCW
CW
60
www.honeywell.com/sensing
CONTACT
SPDT
SPDT
SPDT
0,22 N m [31.25 in oz]
3,34 N to 8,90 N [0.75 lb to 2.0 lb]
5,56 mm [0.219 in] 8°
90°
25°
0,18 mm [0.007 in] 0.25°
0,3 mm [0.012 in] 4°
ELECTRICAL RATING
A
A
B
CAT. LISTING
EX-AR20
EX-AR230
EXA-AR20
HAZARDOUS LOCATION SWITCHES
Roller lever
DPDT, Preleaded with 0,91 m [3 ft] leadwire
Roller material:
Operating force max. (OF):
Electrical rating A
Clockwise (CW)
Counter clockwise (CCW)
Electrical rating B
Pretravel max. (PT):
Electrical rating A, B
Clockwise (CW)
Counter clockwise (CCW)
Overtravel max. (OT):
Electrical rating A
Clockwise (CW)
Counter clockwise (CCW)
Electrical rating B
Differential travel max. (DT):
Electrical rating A
Electrical rating B
ACTUATION
CW
CCW
CW/Class 1 Group B
CCW/Class 1 Group B
CW/High temperature
CW
CW/No mounting bracket
CW/Nylon roller
CW/No mounting bracket
*No ATEX approval
CONTACT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
5,56 mm [0.219 in] 8°
1,65 mm [0.065 in] 3.5°
90°
25°
25°
ACTUATION
CW
CONTACT
SPDT
ELECTRICAL RATING
C
C
CONTACT
DPDT
DPDT
CAT. LISTING
EXD-AR-3
EXD-AR30-3
Operating force max. (OF):
Clockwise (CW)
Counter clockwise (CCW)
Pretravel max. (PT):
Clockwise (CW)
Counter clockwise (CCW)
Overtravel max. (OT):
Differential travel max. (DT):
Sealing:
ACTUATION
CW/3,2 m [10.5 ft] leadwire
CCW/0,91 m [3 ft] leadwire
CW/0,91 m [3 ft] leadwire
CONTACT
SPDT
SPDT
SPDT
2,22 N to 6,67 N [0.5 lb to 1.5 lb]
11,1 N [2.5 lb]
5,56 mm [0.219 in] 8°
1,65 N [0.065 in] 3.5°
25°
0,64 mm [0.025 in]
NEMA Class 1 Group B
ELECTRICAL RATING
E
E
E
CAT. LISTING
EXH-AR3
EXH-AR33
EXH-AR7
0,18 mm [0.007 in] 0.25°
0,3 mm [0.012 in] 4°
ELECTRICAL RATING
A
A
A
A
A
B
B
A
A
CAT. LISTING
EX-AR
EX-AR30
EX-AR800
EX-AR830
EX-AR400*
EXA-AR
EXA-AR62
EX-AR182
EX-AR141
0,56 N [2 oz]
ELECTRICAL RATING
A
CAT. LISTING
EX-AR16
Maintained contact
Operating force max. (OF):
Pretravel max. (PT):
Overtravel max. (OT):
ACTUATION
CW
CCW
Hermetically sealed
2,22 N to 5,56 N [0.5 lb to 1.25 lb]
11,1 N [2.5 lb]
3,34 N to 8,90 N [0.75 lb to 2.0 lb]
Operating force max. (OF):
CONTACT
SPDT
2,22 N to 6,67 N [0.5 lb to 1.5 lb]
12,2 N [2.75 lb]
6,35 mm [0.250 in]
25°
2,77 mm [0.109 in] 4°
NEMA Class 1 Group B
Bronze
CW or CCW actuation, no return spring, low
operating force
ACTUATION
CW/CCW/No mounting bracket
Operating force max. (OF):
Clockwise (CW)
Counter clockwise (CCW)
Pretravel max. (PT):
Overtravel max. (OT):
Differential travel max. (DT):
Sealing:
3,34 N [0.75 lb]
5,56 mm [0.219 in] 8°
90°
ELECTRICAL RATING
A
CAT. LISTING
EX-XR3
2 Conduit openings
Operating force max. (OF):
Electrical rating A
Electrical rating B
Electrical rating C
Pretravel max. (PT):
Electrical rating A, B
Electrical rating C
Overtravel max. (OT):
Electrical rating A
Electrical rating B, C
Differential travel max. (DT):
Electrical rating A
Electrical rating B
Electrical rating C
CONTACT
DPDT
SPDT
SPDT
www.honeywell.com/sensing
2,22 N to 5,56 N [0.5 lb to 1.25 lb]
3,61 N to 8,90 N [0.8 lb to 2 lb]
2,22 N to 6,67 N [0.5 lb to 1.5 lb]
5,56 mm [0.219 in] 8°
6,35 mm [0.250 in]
90°
25°
0,18 mm [0.007 in] 0.25°
0,3 mm [0.012 in] 0.5°
2,77 mm [0.109 in] 4°
ELECTRICAL RATING
C
B
A
CAT. LISTING
4EX1-3
2EX1
1EX1
61
HAZARDOUS LOCATION SWITCHES
EX Series
Side rotary actuated switches (continued)
Overtravel plunger actuated switches
Cross roller lever, rotated 90°
Top pin plunger
Operating force max. (OF):
Pretravel max. (PT):
Overtravel max. (OT
Differential travel max. (DT):
CW
CONTACT
SPDT
2,22 N to 5,56 N [0.5 lb to 1.25 lb]
5,56 mm [0.219 in] 8°
90°
0,18 mm [0.007 in] 0.25°
ELECTRICAL RATING
A
CAT. LISTING
EX-CR
Rod lever
OPTIONS
Operating force max. (OF):
Electrical rating A, C
Electrical rating B
Pretravel max. (PT):
Electrical rating A
Electrical rating B
Electrical rating C
Overtravel min. (OT):
Electrical rating A
Electrical rating B
Electrical rating C
Differential travel max. (DT):
Electrical rating A
Electrical rating B
Electrical rating C
No mounting bracket
High temperature
Low OF
*No ATEX approval
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
CW/No mounting bracket
62
CONTACT
SPDT
0,56 N [2 oz]
18°
40°
ELECTRICAL RATING
A
CAT. LISTING
EX-AR1613
CONTACT
SPDT
SPDT
SPDT
SPDT
13,34 N [3.0 lb]
8,90 N [2 lb]
1,98 mm [0.078 in]
1,27 mm [0.050 in]
3,96 mm [0.156 in]
4,78 mm [0.188 in]
3,18 mm [0.125 in]
3,48 mm [0.141 in]
0,10 mm [0.004 in]
0,23 mm [0.009 in]
1,52 mm [0.060 in]
ELECTRICAL RATING
A
A
A
B
CAT. LISTING
EX-Q
EX-Q62
EX-Q400*
EXA-Q
Sealing NEMA Class 1 Group B
CONTACT
SPDT
Preleaded with 0,91 m [3 ft] leadwire DPDT
www.honeywell.com/sensing
ELECTRICAL RATING
A
C
CAT. LISTING
EX-Q800
EXD-Q-3
HAZARDOUS LOCATION SWITCHES
Boot sealed
Operating force max. (OF):
Electrical rating D
Electrical rating B
Pretravel max. (PT):
Electrical rating D
Electrical rating B
Overtravel min. (OT):
Electrical rating D
Electrical rating B
Differential travel max. (DT):
Electrical rating D
Electrical rating B
Class 1 Group B
CONTACT
SPDT
SPDT
13,34 N [3.0 lb]
15,57 N [3.5 lb]
1,98 mm [0.078 in]
2,77 mm [0.109 in]
4,78 mm [0.188 in]
3,18 mm [0.125 in]
0,10 mm [0.004 in]
0,23 mm [0.009 in]
ELECTRICAL RATING
D
B
CAT. LISTING
EX-N15
EXA-N
Manually actuated
Operating force max. (OF):
CONTACT
SPDT
11,1 N [2.5 lb]
ELECTRICAL RATING
A
CAT. LISTING
EX-AR50
www.honeywell.com/sensing
63
HAZARDOUS LOCATION SWITCHES
CX Series
Weather Sealed
Explosion Proof
Switches
X
ATEoved
r
p
p
a
CX switches, as are the LSX/BX Series, are built especially for outdoor use in hazardous
atmospheres. These enclosures are constructed to withstand the pressure of an internal
explosion.
O-ring seals make the enclosure weatherproof but are outside of required flame paths so
explosion proof requirements are maintained.
As factory assembled, all basic switches operate on clockwise and counterclockwise rotation. The
actuating mechanism can be field adjusted for CW or CCW operation only.
Analog output, 4 mA to 20 mA, is available.
Basic switches operate nearly simultaneously in multiple switch devices.
Shafts of devices without shaft restoring force can be rotated through 360°.
Sealing:
UL listed
CSA certified
Operating temperature:
Approvals:
Housing:
Conduit:
Contacts:
Actuators
IP66, 67; NEMA 1, 3, 4, 4X, 6, 6P, 7, 9 and 13
Class I, Div. 1, Groups B (16CX, 24CX, 26CX, and 84CX only),
C and D; and Class II, Div. 1, Groups E, F and G
Class I, Div. 1, Groups B (16CX, 24CX, 26CX, and 84CX only),
C and D; and Class II, Groups E, F and G
-25 °C to 85 °C [-13 °F to 185 °F]
UL, CSA
CX-E only
ATEX EExd IIC T6 Category II 2 GD
Aluminium
80CX
Bronze
¾ in - 14NPT
A, C, D
Silver
F
Gold
Electrical Ratings:
A
UL/CSA Rating: L96
15 A, 120, 240 or 480 Vac, ind. and res
1
/8 Hp, 120 Vac; ¼ Hp, 240 Vac
0.5 A, 125 Vdc, 0.25 A, 250 Vdc, res
C
UL/CSA Rating: L59
10 A, 120 or 240 Vax, ind. and res
0.3 A, 125 Vdc, 0.15 A, 250 Vdc, res
D
UL/CSA Rating: L22
1 A, 120 Vax, ind. and res
F
UL/CSA Rating: L22
1 A, 125 Vac
G
Analog Current Output (4 mA to 20 mA)
12.5 Vdc to 40 Vdc
Switching options:
SPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
DPDT
Double Pole, Double Throw
Snap action contacts (2NC/2NO)
Analog position sensing specifications (Electrical rating “G”)
Current output:
Voltage compliance range:
Maximum load resistance:
Current signal output:
Span:
Null:
64
www.honeywell.com/sensing
4 mA to 20 mA
12.5 Vdc to 40 Vdc
RL, Max., –V Supply - 12.5
20 mA
4 mA to 20 mA
Adjustable from 15° to 90° of angular rotation
4 mA position may be set at any angular position
HAZARDOUS LOCATION SWITCHES
Operating characteristics
Basic Switch Type
BZ
BA
DT
Pretravel (max.)*
15°
15°
30°
Differential Travel (max.)
10°
10°
25°
Overtravel (min.)*
90°
90°
75°
Operating Torque (max.)
11.1 in lb/1,25 N m
* May be modified in field to suit application requirements.
Note: Levers are ordered separately
(see pages 71-73 for details)
HS
30°
20°
75°
Notes:
Add the letter “A” to listings with side mounting holes tapped 5/16 (8).
Example: 11CX2A
Add the letter “B” to listings with thru mounting holes tapped 3/8-24 (4).
Example: 11CX2B
Add the letter “C” to listings for low temperature (-40 °C/°F) applications.
Example: 11CX2C
Add “D01” to specify a “direct-couple” listing with 3/8 in. dia by 3/4 in. long
flatted shaft.
Example: 11CX2-D01
Add the letter “E” to listings for European Atex approvals.
Example: 11CX2E
For Replacement Basic Switch Assemblies, change the first number in the
listing to “9”.
Example: 11CX2 becomes 91CX2
Short housing
OPTIONS
HOUSING
SIZE
Short
Short
Short
Short
Short
Short
BASIC
SWITCHES
BZ (2)
BZ (2)
BZ (2)
BZ (2)
BZ (2)
BZ (2)
CONTACT
SHAFT RESTORING
FORCE TO CENTRE
With
Without
With
Without
With
Without
CAT. LISTING
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
ELECTRICAL
RATING
A
A
A
A
F
F
Standard
Standard
BZ (4)
BZ (4)
SPDT
SPDT
A
A
With
Without
21CX4
21CX14
11CX2
11CX12
11CX2E
11CX12E
1172CX2
1172CX12
UL listed for Class I, Group B (hydrogen atmospheres)
Standard housing
HOUSING
SIZE
Standard
Standard
Short
Short
Standard
BASIC
SWITCHES
DT (2)
DT (2)
HS (2)
HS (2)
HS (4)
CONTACT
DPDT
DPDT
SPDT
SPDT
SPDT
ELECTRICAL
RATING
C
C
D
D
D
SHAFT RESTORING
FORCE TO CENTRE
With
Without
With
Without
With
CAT. LISTING
SHAFT RESTORING
FORCE TO CENTRE
With
Without
Without
With
Without
CAT. LISTING
24CX2
24CX12
16CX2
16CX12
26CX4
Analog output, 4 mA to 20 mA
HOUSING
SIZE
Short
Short
Short
Standard
Standard
BASIC
SWITCHES
None
None
None
BZ (2)
BZ (2)
CONTACT
N/A
N/A
N/A
SPDT
SPDT
ELECTRICAL
RATING
G
G
G
A, G
A, G
18CX0
18CX10
18CX10E
281CX2
281CX12
Bronze housing for use in corrosive
environments
80CX switches have rugged bronze housings which are resistant to salt water
and other corrosive environments. They comply with the NEMA 4X
requirement for protection against corrosion, in addition to NEMA
enclosure standards met by other CX switches. O-ring seals make the
enclosure weather-proof, but are outside of required flame paths,
maintaining explosion-proof requirements.
HOUSING
SIZE
Standard
Standard
Standard
Standard
BASIC
SWITCHES
BZ (2)
BZ (4)
BZ (4)
DT (2)
www.honeywell.com/sensing
CONTACT
SPDT
SPDT
SPDT
DPDT
ELECTRICAL
RATING
A
A
A
C
SHAFT RESTORING
FORCE TO CENTRE
With
With
Without
With
CAT. LISTING
81CX2
81CX4
81CX14
84CX2
65
HAZARDOUS LOCATION SWITCHES
LSX/BX Series
Weather sealed
explosion proof
switches
BX X
ATE
LSX/BX Series weather sealed, explosion proof limit switches are for use
either indoor or outdoors in hazardous atmospheres. They are completely
sealed and designed for use in explosive gas/dust environments.
LSX/BX products meet the sealing standards of NEMA 1, 3, 4, 6, 7, 9 and 13.
BX products are also sealed to IP67 standard and are ATEX approved (see
specifications below).
All heads are field adjustable at 90° increments. Heads with side rotary
actuators can be adjusted for clockwise and counter clockwise operation.
d
rove
app
Actuators
Sealing:
LSX
NEMA 1, 3, 4, 6, 7 (Class 1, Division 1, Groups B, C, D),
9 (Class 2, Division 1, Groups E, F, G), 13
IP67, NEMA 1, 3, 4, 6, 7 (Class 1, Division 1, Groups B, C, D),
9 (Class 2, Division 1, Groups E, F, G), 13
BX
Rotary actuated switches
Approvals:
LSX/BX
UL, CSA*
BX only
EExd IIC T6 category II 2 GD, SIRA 00ATEX 1037X
Contacts:
Electrical ratings A, B
Silver
Electrical rating C
Gold
Switching options:
SPDT
DPDT
Single Pole, Double Throw
Double Pole, Double Throw
Snap action contacts (1NC/1NO)
Snap action contacts (2NC/2NO)
Operating torque max.:
SPDT Double Break
DPDT Double Break
* Applies only to listings with ½ in NPT or ¾ in NPT
Electrical ratings
10 amps continuous carry. Circuits on any one pole must be the same
polarity.
ac Volts
Pilot duty: 600 Vac, 720 VA
A
SPDT
NEMA
A600
B
DPDT
NEMA
B600
C
SPDT/DPDT
Amps at 0.35 Power Factor
Vac
Make
Break
120
60
6
240
30
3
480
15
1.5
600
12
1.2
120
30
3
240
15
1.5
480
7.5
0.75
600
6
0.60
250 Vac or 60 Vdc, 0.050 amp max.
Standard
Low
Pretravel max. (PT):
Standard
Low
Overtravel min. (OT):
Standard
Low
Differential travel max. (DT):
Standard SPDT
Standard DPDT
Low SPDT
Low DPDT
Note: Levers are ordered separately
(see pages 71-73 for details)
dc Volts
Pilot duty: 240 Vdc, 30 watts
A
SPDT
B
DPDT
C
SPDT/DPDT
66
0,45 N m [4.0 in lb]
0,19 Nm [1.7 in lb]
15°
9°
60°
66°
Make and Break Amps
Vdc
Inductive
Resistive
120
0.25
0.8
240
0.15
0.4
120
0.25
0.8
240
0.15
0.4
250 Vac or 60 Vdc, 0.050 amp max.
www.honeywell.com/sensing
5°
7°
3°
4°
HAZARDOUS LOCATION SWITCHES
OPTIONS
Side rotary
Maintained contact
39,6
1.56
50,8
2.00
Operating torque max.:
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT): SPDT
DPDT
19,0
0.75
25,4
1.00
31,9
1.25
LSX
Operating temperature:
49,3
1.94
Maintained
Maintained
Maintained
CONTACT
SPDT
DPDT
DPDT
-1 °C to 121 °C [30 °F to 250 °F]
CONDUIT
½ in - 14NPT
¾ in - 14NPT
½ in - 14NPT
ELECTRICAL RATING
A
B
B
CAT. LISTING
LSXN3K
LSXN4L
LSXN7L
BX (ATEX approved)
LSX
Operating temperature:
Low DT
0,45 N m [4.0 in lb]
65°
20°
30°
35°
CONTACT
SPDT
SPDT
SPDT
SPDT
DPDT
DPDT
DPDT
SPDT
-12 °C to 121 °C [10 °F to 250 °F]
CONDUIT
½ in - 14NPT
20 mm
¾ in - 14NPT
½ in - 14NPT
¾ in - 14NPT
20 mm
½ in - 14NPT
½ in - 14NPT
ELECTRICAL RATING
A
A
A
C
B
B
B
A
CAT. LISTING
LSXA3K
LSX4A3K
LSXA4K
LSXA3E
LSXA4L
LSX4A4L
LSXA7L
LSXP3K
Operating temperature:
Maintained
Maintained
CONTACT
SPDT
DPDT
-40 °C to 70 °C [ -40 °F to 158 °F]
CONDUIT
½ in - 14NPT
¾ in - 14NPT
ELECTRICAL RATING
A
B
CAT. LISTING
BXN3K
BXN4L
Top rotary
BX (ATEX approved)
Operating temperature:
CONTACT
SPDT
SPDT
DPDT
-40 °C to 70 °C [ -40 °F to 158 °F]
CONDUIT
½ in - 14NPT
20 mm
¾ in - 14NPT
ELECTRICAL RATING
A
A
B
CAT. LISTING
BXA3K
BX4A3K
BXA4L
LSX
Operating temperature:
Low DT/Low torque
Low DT/Low torque
Low torque
Low torque
CONTACT
SPDT
DPDT
SPDT
DPDT
-1 °C to 121 °C [30 °F to 250 °F]
CONDUIT
½ in - 14NPT
¾ in - 14NPT
½ in - 14NPT
¾ in - 14NPT
ELECTRICAL RATING
A
B
A
B
CAT. LISTING
LSXH3K
LSXH4L
LSXR3K
LSXR4L
Low torque
Low torque
Low torque
CONTACT
SPDT
SPDT
DPDT
-40 °C to 70 °C [ -40 °F to 158 °F]
CONDUIT
½ in - 14NPT
½ in - 14NPT
¾ in - 14NPT
ELECTRICAL RATING
A
C
C
CAT. LISTING
BXR3K
BXR3E
BXR4S
0,28 N m [2.5 in lb]
25°
100°
10°
12°
LSX
Operating temperature:
BX (ATEX approved)
Operating temperature:
Operating torque max.:
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT): SPDT
DPDT
CONTACT
SPDT
DPDT
-1 °C to 121 °C [30 °F to 250 °F]
CONDUIT
½ in - 14NPT
¾ in - 14NPT
ELECTRICAL RATING
A
B
CAT. LISTING
LSXB3K
LSXB4L
Centre neutral
Operating torque max. :
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
0,45 N m [4.0 in lb]
18°
57°
10°
LSX
Operating temperature:
CONTACT
DPDT
DPDT
-1 °C to 121 °C [30 °F to 250 °F]
CONDUIT
¾ in - 14NPT
20 mm
ELECTRICAL RATING
B
B
CAT. LISTING
LSXM4N
LSX4M4N
www.honeywell.com/sensing
67
HAZARDOUS LOCATION SWITCHES
LSX/BX Series (continued)
Plunger actuated switches
BX X
d
ATpE
rove
ap
Top plungers
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
SPDT
DPDT
17,79 N [4 lb]
1,78 mm [0.07 in]
4,83 mm [0.19 in]
0,38 mm [0.015 in]
0,51 mm [0.02 in]
OPTIONS
Top pin plunger
Top roller plunger
Head can be set at 90° increments for cam or slide actuation
Operating point:
58,5 mm ± 0,76 mm
[2.305 in ± 0.03 in]
Operating point:
LSX
Operating temperature:
-12 °C to 93 °C [10 °F to 200 °F]
LSX
Operating temperature:
CONTACT
SPDT
SPDT
DPDT
CONDUIT
½ in - 14NPT
20 mm
¾ in - 14NPT
ELECTRICAL RATING
A
A
B
CAT. LISTING
LSXC3K
LSX4C3K
LSXC4L
BX (ATEX approved)
Operating temperature:
-40 °C to 70 °C [ -40 °F to 158 °F]
CONTACT
SPDT
DPDT
DPDT
ELECTRICAL RATING
A
B
B
CONDUIT
20 mm
¾ in - 14NPT
20 mm
CAT. LISTING
BX4C3K
BXC4L
BX4C4L
CONTACT
SPDT
SPDT
DPDT
CONDUIT
½ in - 14NPT
20 mm
¾ in - 14NPT
CONTACT
SPDT
68
CONDUIT
½ in - 14NPT
-40 °C to 70 °C [ -40 °F to 158 °F]
ELECTRICAL RATING
A
CONDUIT
20 mm
21,6
(0.85)
65,66 mm to 72,01 mm
[2.585 in to 2.835 in]
-12 °C to 93 °C [10 °F to 200 °F]
ELECTRICAL RATING
A
CAT. LISTING
LSXD3K
LSX4D3K
LSXD4L
CONTACT
SPDT
LSX
Operating temperature:
ELECTRICAL RATING
A
A
B
Operating temperature:
Min.
operating point
Max.
65,7
operating point (2,59)
72,0
(2,83)
Operating point:
-12 °C to 93 °C [10 °F to 200 °F]
BX (ATEX approved)
Top pin plunger, adjustable
7,9
(0.31)
68,6 mm ± 1.00 mm [2.700 in ± 0.04 in]
CAT. LISTING
LSXV3K
www.honeywell.com/sensing
CAT. LISTING
BX4D3K
HAZARDOUS LOCATION SWITCHES
Wobble actuated switches
OPTIONS
Side plungers
Plastic rod
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
26,69 N [6 lb]
2,54 mm [0.10 in]
4,83 mm [0.19 in]
1,14 mm [0.045]
OPTIONS
Side pin plunger
39,6
1.56
50,8
2.00
19,0
0.75
25,4
1.00
49,3
1.94
Operating point:
33,0 mm [1.30 in]
LSX
Operating temperature:
CONTACT
SPDT
DPDT
CONDUIT
½ in - 14NPT
¾ in - 14NPT
-12 °C to 93 °C [10 °F to 200 °F]
ELECTRICAL RATING
A
B
CAT. LISTING
LSXE3K
LSXE4L
Operating force max. (OF):
Pretravel max. (PT):
LSX
Operating temperature:
CONTACT
SPDT
DPDT
Side roller plunger
2,78 N [10 oz]
25,4 mm [1.0 in]
CONDUIT
½ in - 14NPT
¾ in - 14NPT
-12 °C to 93 °C [10 °F to 200 °F]
ELECTRICAL RATING
A
B
CAT. LISTING
LSXJ3K-7A
LSXJ4L-7A
Roller may be set in vertical or horizontal position for cam or slide
actuation
Cat whisker
Operating point:
44,1 mm [1.735 in]
LSX
Operating temperature:
CONTACT
SPDT
CONDUIT
½ in - 14NPT
-12 °C to 93 °C [10 °F to 200 °F]
ELECTRICAL RATING
A
CAT. LISTING
LSXF3K
BX (ATEX approved)
Operating temperature:
-40 °C to 70 °C [ -40 °F to 158 °F]
CONTACT
SPDT
ELECTRICAL RATING
A
CONDUIT
½ in - 14NPT
CAT. LISTING
BXF3K
Operating force max. (OF):
Pretravel max. (PT):
1,39 N [5 oz]
50,8 mm [2.0 in]
LSX
Operating temperature: -12 °C to 93 °C [10 °F to 200 °F][10 °F to 200
°F]
CONTACT
SPDT
CONDUIT
½ in - 14NPT
www.honeywell.com/sensing
ELECTRICAL RATING
A
CAT. LISTING
LSXK3K-8A
69
70
www.honeywell.com/sensing
LEVERS
Levers
CAT.
LISTING
ROLLER
MATERIAL
Separate levers must be ordered with side
rotary types. The table provides a cross
reference between product families and the
lever order/reference numbers. The following
pages describe the levers. Illustrations are for
reference only. Exact mounting drawings and
dimensions are available from your local sales
office or from the website below.
6PA57
6PA63
6PA69
6PA80
6PA82
6PA102
6PA144
GLZ51A
GLZ51B
GLZ52A
GLZ52B
GLZ54J
GLZ55B
LSZ51
LSZ51A
LSZ51B
LSZ51C
LSZ51D
LSZ51W
LSZ51Y
LSZ52
LSZ52A
LSZ52B
LSZ52C
LSZ52D
LSZ52J
LSZ52K
LSZ52M
LSZ52N
LSZ52W
LSZ52Y
LSZ53A
LSZ53B
LSZ53D
LSZ53E
LSZ53P
LSZ53S
LSZ53U
LSZ54
LSZ54M
LSZ54N
LSZ54R
LSZ54V
LSZ55
LSZ55A
LSZ55B
LSZ55C
LSZ55D
LSZ55W
LSZ55Y
LSZ61
LSZ67AA
LSZ68
6PA5-EX
6PA127-EX
6PA130-EX
6PA131-EX
6PA136-EX
6PA138-EX
6PA142-EX
6PA204-EX
Aluminium
Stainless steel
Spring rod
Steel
Steel
Nylon
Ball bearing
Nylon
Steel
Nylon
Steel
Aluminium
Steel
N/A
Nylon
Steel
Nylon
Steel
Rubber
Rubber
N/A
Nylon
Steel
Nylon
Steel
Nylon
Nylon
Nylon
Nylon
Rubber
Rubber
Nylon
Steel
Steel
Nylon
Steel
Nylon
Steel
N/A
Aluminium
Stainless steel
Spring wire
Cable
N/A
Nylon
Steel
Nylon
Steel
Rubber
Rubber
Nylatron
Rubber
Delrin
Bronze
Nylon
Bronze
Bronze
Aluminium
Nylon
Bronze
Nylon
Levers lock in any position, 360° around the
shaft. Rollers may be mounted on the front or
back of the lever.
All levers are supplied with cap screws.
Explosion proof switches
Because of explosion proof requirements, only
nylon rollers or other non sparking material
should be selected. BX/LSX, CX and EX
plunger and cat whisker types are of non
sparking material. Do not mix or substitute.
Specification (unless stated
otherwise)
Lever radius/length:
Roller Diameter:
Roller Width:
-EX
1.5 in [38,1
0.75 in [19,1
0.25 in [6,35
0.312 in [7,92
Note:
Not all levers are compatible
with all switches
mm]
mm]
mm]
mm]
GLA
LIMIT SWITCH SERIES
HDLS
LS2
LS
EXPLOSION PROOF SERIES
BX/LSX
CX
EX
Stainless steel
levers
LS2Z51A
LS2Z51B
LS2Z52A
LS2Z52B
LS2Z54N
Nylon
Steel
Nylon
Steel
Steel
www.honeywell.com/sensing
71
LEVERS
OPTIONS * denotes lever suitable for Explosion Proof Series switches
One way roller lever
Standard fixed lever
MOUNTED ON
Without roller
Nylon roller
Metal roller
Nylon roller
Metal roller
Nylon roller
Metal roller
Bronze roller
Nylon roller
Ball bearing roller
Front
Front
Back
Back
Front
Front
Front
Front
Front
CAT. LISTING
LSZ51*
LSZ51A*
LSZ51B
LSZ51C*
LSZ51D
GLZ51A
GLZ51B
6PA5-EX*
6PA127-EX*
6PA144
Offset fixed lever
RADIUS/LENGTH
Bronze roller, clockwise
RADIUS/LENGTH CAT. LISTING
1.56 in [39,6 mm] 6PA130-EX*
Back
Back
Front
Front
Front
Hub only
Aluminium rod
Stainless steel rod
Aluminium, spring only
Aluminium, flexible cable
Aluminium rod
Stainless steel rod
Aluminium rod
CAT. LISTING
LSZ54*
5.5 in [139,7 mm] LSZ54M*
13.0 in [330,2 mm] LSZ54N
12.0 in [305 mm] LSZ54R
4.8 in [122 mm]
LSZ54V
7.9 in [200 mm]
GLZ54J
13.0 in [330,2 mm] 6PA63
5.3 in [134,1 mm] 6PA136-EX*
Bronze roller, counter clockwise 1.56 in [39,6 mm] 6PA142-EX*
Perpendicular (cross) roller lever
MOUNTED ON
Without roller
Nylon roller
Metal roller
Nylon roller
Metal roller
Metal roller
Adjustable rod
CAT. LISTING
LSZ55*
LSZ55A*
LSZ55B
LSZ55C*
LSZ55D
GLZ55B
RADIUS/LENGTH
Bronze roller
mm]
6PA131-EX*
Adjustable rod, nylon roller
CAT. LISTING
1.81 in [46,0
Aluminium rod, nylon roler
RADIUS/LENGTH CAT. LISTING
12.5 in [317,5 mm] 6PA204-EX*
Adjustable lever
Yoke lever
Operating radius/length:
1.5 in to 3.5 in
[38,1 mm to 88,9 mm]
-EX
1.69 in to 3.0 in
[42,9 mm to 76,2 mm]
Adjustable lever, without roller
Nylon roller
Metal roller
Nylon roller
Metal roller
Nylon roller,
Ø 1.0 in [25,4] x 0.5 in [12,7 mm]
Nylon roller, Ø 1.5 in [38,1]
Nylon roller, Ø 2.0 in [50,8]
Nylon roller, 0.5 in wide [12,7 mm]
Nylon roller
Metal roller
Nylon roller,
Ø 1.0 in [25,4] x 0.5 in [12,7 mm]
MOUNTED ON CAT. LISTING
LSZ52
Back
LSZ52A*
Back
LSZ52B
Front
LSZ52C*
Front
LSZ52D
Front
Front
Front
Front
Back
Back
LSZ52J*
LSZ52K*
LSZ52M*
LSZ52N*
GLZ52A
GLZ52B
Front
6PA138-EX*
Nylon roller
Metal roller
Metal roller
Nylon roller
Metal roller
Nylon roller
Metal roller
Metal roller
Metal roller
Nylon roller
Note:
72
Spring rod
MOUNTED ON
Front/Back
Front/Back
Front/Front
Back/Front
Back/Back
Back/Back
Back/Front
Front/Back
Front/Front
Front/Front
CAT. LISTING
LSZ53A
LSZ53B
LSZ53D
LSZ53E*
LSZ53P
LSZ53S*
LSZ53U
6PA80
6PA82
6PA102
Ø 0.25 in [6,35 mm]
Ø 0.17 in [4,32 mm]
Not all levers are compatible with all switches
www.honeywell.com/sensing
RADIUS/LENGTH
12.0 in [305 mm]
7.4 in [188 mm]
CAT. LISTING
LSZ68
6PA69
LEVERS
* denotes lever suitable for Explosion Proof Series switches
Stainless steel levers
**Large rubber roller, adjustable
lever
Flexible loop
Roller Diameter:
Roller Width:
0.75 in [19,1 mm]
0.25 in [6,35 mm]
OPTIONS
Standard fixed lever
Flexible loop
RADIUS/LENGTH
6.0 in [152 mm]
CAT. LISTING
LSZ61
Ø 1.6 in X 0.50 in wide roller
[40,6 mm X 12,7 mm]
Ø 2 in X 0.50 in wide roller
[50,8 mm X 12,7 mm]
Hand operated button
CAT. LISTING
LSZ52W
LSZ52Y
Operating radius/length:
Nylon roller
Stainless steel roller
1.5 in [38,1 mm]
MOUNTED ON
Front
Front
CAT. LISTING
LS2Z51A*
LS2Z51B
**Conveyor roller arm
Adjustable lever
Ø 1.5 in [38,1 mm]
CAT. LISTING
6PA57
Operating radius/length: 6.78 in [172,2 mm]
**Large rubber roller, fixed
lever
Plastic roller, 1.5 in Ø X 3.8 in long
[38,1 mm X 96,5 mm]
CAT. LISTING
LSZ67AA
Operating radius/length:
1.5 in to 3.5 in
[38,1 mm to 88,9 mm]
Nylon roller
Stainless steel roller
Ø 1.6 in X 0.50 in wide roller
[40,6 mm X 12,7 mm]
Ø 2 in X 0.50 in wide roller
[50,8 mm X 12,7 mm]
MOUNTED ON
Back
Back
CAT. LISTING
LS2Z52A*
LS2Z52B
CAT. LISTING
LSZ51W
LSZ51Y
**Large rubber roller, fixed offset
lever
NOTICE **
Adjustable rod
Large rubber rollers and conveyor roller arm
Because of the lever’s mass, the limit switch should be
mounted with the lever facing down. This will enable
gravity to help restore the switch to the free position.
Operating radius/length:
13 in [330,2 mm]
CAT. LISTING
LS2Z54N
Ø 1.6 in X 0.50 in wide roller
[40,6 mm X 12,7 mm]
Ø 2 in X 0.50 in wide roller
[50,8 mm X 12,7 mm]
CAT. LISTING
LSZ55W
LSZ55Y
Note:
Not all levers are compatible with all switches
www.honeywell.com/sensing
73
POWER RELAYS
SZR-MY
Series Power
Relay
2,6
[0.10]
Solder/Plug-In Terminal, DPDT
8 - O 1,2 [0.05] x 3 Holes
Current rating (SZR-MY2):
Current rating (SZR-MY4):
Contact resistance:
Contact material:
Agency approvals:
Operate time:
Release time:
Ambient temperature:
Ambient humidity:
Switching options:
5A
3A
50 mOhm max.
Fine silver
UL, CE, CSA
20 ms max.
20 ms max.
-25 °C to 75 °C [-13 °F to 167 °F]
45% RH to 85% RH
DPDT, 4PDT
6,3
[0.25]
SZR-MY Series relays have a small package design for multiple
application needs. Relays are available in two configurations: DPDT with
a 5 A load and 4PDT with a 3 A load. One standard and three options
are available: LED indicator, internal surge protection diode, and LED
indicator/diode protection.
Max. 21,5
[0.85]
0,5
[0.02]
Max. 36,0 [1.42]
Max. 28,0 [1.10]
0,5
[0.02]
SZR-MY Series general-purpose power relays are designed for a wide
range of potential applications including power, as well as logic control,
for factory machines and control panels.
6,0
[0.24]
Standard
COIL INPUT VOLTAGE
110/120 Vac
220 Vac
12 Vdc
24 Vdc
MAX. CONTACT RATING
250 Vac/5 amp
250 Vac/5 amp
125 Vdc/1 amp
125 Vdc/1 amp
CAT. LISTING
SZR-MY2-1-AC110-120V
SZR-MY2-1-AC220V
SZR-MY2-1-DC12V
SZR-MY2-1-DC24V
MAX. CONTACT RATING
250 Vac/5 amp
250 Vac/5 amp
125 Vdc/1 amp
125 Vdc/1 amp
CAT. LISTING
SZR-MY2-N1-AC110-120V
SZR-MY2-N1-AC220V
SZR-MY2-N1-DC12V
SZR-MY2-N1-DC24V
MAX. CONTACT RATING
125 Vdc/1 amp
CAT. LISTING
SZR-MY2-D1-DC24V
LED Indicator
COIL INPUT VOLTAGE
110/120 Vac
220 Vac
12 Vdc
24 Vdc
Diode Protection
MY2 Series
COIL INPUT VOLTAGE
24 Vdc
OPTIONS
LED Indicator/Diode Protection
COIL INPUT VOLTAGE
24 Vdc
3,3
[0.13]
1,0
[0.04]
Standard, PCB Terminal, DPDT
6,3
[0.25]
0,5
[0.02]
Max. 36,0 [1.42]
COIL INPUT VOLTAGE
110/120 Vac
220/240 Vac
24 Vdc
74
Max. 28,0
[1.10]
0,5
[0.02]
3,5
[0.14]
Max. 21,5
[0.85]
6,0
[0.24]
MAX. CONTACT RATING
250 Vac/5 amp
250 Vac/5 amp
125 Vdc/1 amp
CAT. LISTING
SZR-MY2-1P-AC110-120V
SZR-MY2-1P-AC220V-240V
SZR-MY2-1P-DC24V
www.honeywell.com/sensing
MAX. CONTACT RATING
125 Vdc/1 amp
CAT. LISTING
SZR-MY2-X1-DC24V
POWER RELAYS
Solder/Plug-In Terminal, 4PDT
MY4 Series
2,6
[0.10]
OPTIONS
14 - O 1.2 [0.05] x 3 Holes
6,3
[0.25]
Max. 28,0
[1.10]
0,5
[0.02]
6,3
[0.25]
3,5
[0.14]
0,5
[0.02]
Max. 36,0 [1.42]
COIL INPUT VOLTAGE
110/120 Vac
220/240 Vac
24 Vdc
Max. 21,5
[0.85]
6,0
[0.24]
Standard
5,0
[0.20]
MAX. CONTACT RATING
250 Vac/3 amp
250 Vac/3 amp
125 Vdc/0.6 amp
Max. 21,5
[0.85]
0,5
[0.02]
Max. 36,0 [1.42]
Max. 28,0
[1.10]
0,5
[0.02]
3,3
[0.13]
1,0
[0.04]
Standard, PCB Terminal, 4PDT
CAT. LISTING
SZR-MY4-1P-AC110-120V
SZR-MY4-1P-AC220V-240V
SZR-MY4-1P-DC24V
COIL INPUT VOLTAGE
110/120 Vac
220 Vac
12 Vdc
24 Vdc
MAX. CONTACT RATING
250 Vac/3 amp
250 Vac/3 amp
125 Vdc/0.6 amp
125 Vdc/0.6 amp
CAT. LISTING
SZR-MY4-1-AC110-120V
SZR-MY4-1-AC220V
SZR-MY4-1-DC12V
SZR-MY4-1-DC24V
MAX. CONTACT RATING
250 Vac/3 amp
250 Vac/3 amp
125 Vdc/0.6 amp
125 Vdc/0.6 amp
CAT. LISTING
SZR-MY4-N1-AC110-120V
SZR-MY4-N1-AC220V
SZR-MY4-N1-DC12V
SZR-MY4-N1-DC24V
MAX. CONTACT RATING
125 Vdc/0.6 amp
CAT. LISTING
SZR-MY4-D1-DC24V
LED Indicator
COIL INPUT VOLTAGE
110/120 Vac
220 Vac
12 Vdc
24 Vdc
Diode Protection
COIL INPUT VOLTAGE
24 Vdc
LED Indicator/Diode Protection
COIL INPUT VOLTAGE
24 Vdc
www.honeywell.com/sensing
MAX. CONTACT RATING
125 Vdc/0.6 amp
CAT. LISTING
SZR-MY4-X1-DC24V
75
POWER RELAYS
SZR-LY Series Power Relay
LY2 Series
OPTIONS
Operate time:
Release time:
Ambient temperature:
Ambient humidity:
Switching options:
10 A
50 mOhm max.
Silver cadium oxide
UL, CE, CSA
18,000 operations/hour (mechanical)
1,800 operations/hour (electrical)
25 ms max.
25 ms max.
-25 °C to 70 °C [-13 °F to 158 °F]
45% RH to 85% RH
DPDT, 4PDT
Solder/Plug-In Terminal, DPDT
14 - O 3,0 [0.12]
3,0 [0.12]
Max. 36,0 [1.42]
6,4 [0.26]
Max. 21,5
[0.85]
Standard
COIL INPUT VOLTAGE
110/120 Vac
220 Vac
12 Vdc
24 Vdc
MAX. CONTACT RATING
250 Vac/10 amp
250 Vac/10 amp
125 Vdc/2 amp
125 Vdc/2 amp
CAT. LISTING
SZR-LY2-1-AC110-120V
SZR-LY2-1-AC220V
SZR-LY2-1-DC12V
SZR-LY2-1-DC24V
MAX. CONTACT RATING
250 Vac/10 amp
250 Vac/10 amp
125 Vdc/2 amp
125 Vdc/2 amp
CAT. LISTING
SZR-LY2-N1-AC110-120V
SZR-LY2-N1-AC220V
SZR-LY2-N1-DC12V
SZR-LY2-N1-DC24V
MAX. CONTACT RATING
125 Vdc/2 amp
CAT. LISTING
SZR-LY2-D1-DC24V
LED Indicator
COIL INPUT VOLTAGE
110/120 Vac
220 Vac
12 Vdc
24 Vdc
Diode Protection
COIL INPUT VOLTAGE
24 Vdc
LED Indicator/Diode Protection
COIL INPUT VOLTAGE
24 Vdc
76
Max. 28,0 [1.10]
CAT. LISTING
SZR-LY2-1P-AC110-120V
SZR-LY2-1P-DC24V
www.honeywell.com/sensing
MAX. CONTACT RATING
125 Vdc/ 2 amp
CAT. LISTING
SZR-LY2-X1-DC24V
Max. 28,0 [1.10]
Current rating:
Contact resistance:
Contact material:
Agency approvals:
Operating frequency:
MAX. CONTACT RATING
250 Vac/10 amp
125 Vdc/2 amp
5,75
[0.23]
One standard and three options are available: LED indicator, internal
surge protection diode, and LED indicator/diode protection.
COIL INPUT VOLTAGE
110/120 Vac
24 Vdc
Max. 21,5 [0.85]
4,5
[0.18]
5,0
[0.20]
SZR-LY Series relays break 10 A loads are often ideal for control panels
that require stable and reliable relays.
1,0
[0.04]
Max. 36,0 [1.42]
0,5
[0.02]
SZR-LY Series general-purpose power relays are designed for a wide
range of potential applications including power, as well as logic control,
for factory machines and control panels.
5,75
[0.23]
2,0
[0.08]
0,5
[0.02]
Standard, PCB Terminal, DPDT
POWER RELAYS
LY4 Series
OPTIONS
Solder/Plug-In Terminal, 4PDT
1,0
[0.04]
Max. 36,0 [1.42]
Max. 41,5 [1.63]
4,5
[0.18]
Max. 28,0 [1.10]
14 - O 3.0 Holes
5,0
[0.20]
2,0
[0.08]
Max. 28,0 [1.10]
0,5
[0.02]
0,5
[0.02]
Standard, PCB Terminal, 4PDT
Max. 36,0 [1.42]
3,0
[0.12]
6,4 [0.25]
Max. 41,5 [1.63]
Standard
COIL INPUT VOLTAGE
110/120 Vac
220/240 Vac
24 Vdc
MAX. CONTACT RATING
250 Vac/10 amp
250 Vac/10 amp
125 Vdc/2 amp
CAT. LISTING
SZR-LY4-1P-AC110-120V
SZR-LY4-1P-AC220V-240V
SZR-LY4-1P-DC24V
COIL INPUT VOLTAGE
110/120 Vac
220 Vac
12 Vdc
24 Vdc
MAX. CONTACT RATING
250 Vac/10 amp
250 Vac/10 amp
125 Vdc/2 amp
125 Vdc/2 amp
CAT. LISTING
SZR-LY4-1-AC110-120V
SZR-LY4-1-AC220V
SZR-LY4-1-DC12V
SZR-LY4-1-DC24V
MAX. CONTACT RATING
250 Vac/10 amp
250 Vac/10 amp
125 Vdc/2 amp
125 Vdc/2 amp
CAT. LISTING
SZR-LY4-N1-AC110-120V
SZR-LY4-N1-AC220V
SZR-LY4-N1-DC12V
SZR-LY4-N1-DC24V
MAX. CONTACT RATING
125 Vdc/2 amp
CAT. LISTING
SZR-LY4-D1-DC24V
LED Indicator
COIL INPUT VOLTAGE
110/120 Vac
220 Vac
12 Vdc
24 Vdc
Diode Protection
COIL INPUT VOLTAGE
24 Vdc
LED Indicator/Diode Protection
COIL INPUT VOLTAGE
24 Vdc
www.honeywell.com/sensing
MAX. CONTACT RATING
125 Vdc/2 amp
CAT. LISTING
SZR-LY4-X1-DC24V
77
POWER RELAYS
MY2 Series Socket
LY2 Series Socket
22,0 [0.87]
3,9
[0.15]
15,6
[0.61]
30,0 [1.18]
25,0 [0.99]
4,2
[0.17]
2 - M4
2 - O 4,5 [0.18] Holes
2,5
[0.10]
26,0
[1.02]
14,5
[0.57]
30,0 [1.18]
Max. 61,0 [2.40]
Max. 61,0 [2.40]
POLES
2
CAT. LISTING
SZX-SMF-08N
4,5
[0.18]
2-M3 or 2-M4
2 - O 6,0 [0.24] 7,0
[0.28]
14-M3.5x8
3,4 [0.13]
2-M4
68,0 [2.68]
62,0 ± 0,1 [2.44 ± .004]
26,0
[1.02]
35,2 [1.39]
15,6
[0.61]
45,0 [1.77]
3,9
[0.15]
4,2
[0.17]
CAT. LISTING
SZX-SLF-08N
LY4 Series Socket
6,0
[0.24]
62,0 [2.44]
POLES
2
35,5 [1.40]
MY4 Series Socket
TYPE
Rail socket
Max. 78,5 [3.09]
TYPE
Rail socket
3,0
[0.12]
25,0 [0.99]
2 - O 4,5 [0.18] Holes
36,0 ± 0,2
[1.42 ± 0.008]
69,0 ± 0,3
[2.72 ± 0.01]
3,0
[0.12]
2 - O 4,5 [0.18] Holes
18,0
[0.70]
25,0 ± 0,2
[0.99 ± .008]
47,0
[1.85]
35,2
[1.39]
62,0 ± 0,1
[2.44 ± .004]
45,0
[1.77]
4,2
[0.17]
62,0 [2.44]
2-M3 or 2-M4
26,0 [1.02]
19,0
[0.75]
8,0
[0.31]
26,0
[1.02]
67,0 [2.64]
6,0
[0.24]
18,0
[0.70]
26,0 [1.02]
30,0 [1.18]
8,0
[0.31]
Max. 45,5
[1.79]
25,0 [0.99]
Max. 61,0 [2.40]
Max. 66,0 [2.60]
Max. 30,0 [1.18]
TYPE
Rail socket
78
POLES
4
CAT. LISTING
SZX-SMF-14N
TYPE
Rail socket
www.honeywell.com/sensing
POLES
4
CAT. LISTING
SZX-SLF-14
SAFETY SWITCHES
Electromechanical Safety
Switches
Honeywell is a worldwide leader in advanced switching and sensing
technology - especially in the area of industrial safety. We offer both
electromechanical safety switches and electronic safety sensors as well as
safety control modules for safety applications in all categories of risk.
Our diverse product line can help customers meet all of their machine
safety needs.
Honeywell products meet or exceed European machine safety standards
and have been approved (CE, INRS) for use in Europe for more than 25
years. As North America moves toward harmonizing with global
standards, machine builders and users can confidently turn to Honeywell
for compliant machine safety solutions. Our products are designed to
meet all applicable OSHA and ANSI standards.
Refer to pages 6 and 7 for more information about degrees of
protection and electrical ratings.
Protective Guarding
Cable Pull Switches
Protective guarding around a dangerous machine can be achieved with
tamper-resistant safety switches. Safety switches incorporate positive
opening operation such that even a welded contact will be mechanically
broken and a stop signaled. These switches monitor the position of
moveable guards and doors, which are used to safeguard access to
equipment and provide protection from ejected pieces, chips, projectiles or
oil. These safeguards require a relatively low investment and can provide
reliable protection if they are regularly checked and maintained.
Cable-pull limit switches serve as a readily accessible means of
emergency stop for applications. These cable-pull devices are visible,
accessible and easy to use and are designed to immediately open the
emergency stop circuit when activated.
! WARNING
IMPROPER INSTALLATION
• Consult with local safety agencies and their requirements
•
when designing a machine-control link, interface and all
control elements that affect safety.
Strictly adhere to all installation instructions.
Failure to comply with these instructions could result in
death or serious injury.
www.honeywell.com/sensing
79
SAFETY SWITCHES
Selection Guide for Electromechanical Safety Switches
Housing Material
Approvals
Sealing
Dimensions
Actuator
Electrical
Rating
Operating
Temperature
To
CCC
UL
Metal
CSA
Plastic
CE
From
IEC
IP
NEMA
(USA)
Height x Width x Depth
mm
[in]
°C
[°F]
1, 12, 13
92,2 x 30,5 x 30,5
[3.63 x 1.20 x 1.20]
Straight or 90°
key
AC15 A600,
DC13 Q300
-25
[-13]
85
[185]
GKN
67
1, 12, 13
4 (indoor
use only)
90,0 x 40,0 x 33,0
[3.55 x 1.57 x 1.30]
Straight or 90°
key
AC15 A600,
DC13 Q300
-25
[-13]
85
[185]
67
1, 12, 13
69,4 x 34,0 x 16,0
[2.73 x 1.34 x 0.63]
AC15, DC13
A300
-25
[-13]
85
[185]
66
1, 4, 12,
13
-25
[-13]
85
[185]
GSC
GKE
66
GKM
Series
Straight or 90°
key
AC15, DC13
A300
GSD
66
1, 12, 13
GSE
66
1, 4, 12,
13
83,0 x 65,0 x 30,0
[3.27 x 2.56 x 1.18]
GK
67
1, 4, 12,
13
121,6 x 42,0 x 42,6
[4.79 x 1.65 x 1.68]
Straight, 90°, Spring
key
AC15, DC13
A600
-25
[-13]
85
[185]
GKL/R
67
1, 4, 6P,
12, 13
149,0 x 110,0 x 48,8
[5.85 x 4.33 x 1.92]
Straight, 90°, Spring
key
AC15, DC13
A600
-25
[-13]
85
[185]
1CPS
67
1, 4, 12,
13
99,1 x 276,2 x 65,2
[3.9 x 10.87 x 2.57]
Linear
AC15, DC13
A600
-40
[-40]
85
[185]
2CPS
GSS
83,0 x 30,5 x 30,0
[3.27 x 1.2 x 1.18]
67
1, 4, 12,
13
165,1 x 79,8 x 325,9
[6.5 x 3.14 x 12.75]
Left and/or Right
AC15, DC13
A600
-40
[-40]
85
[185]
Hinge
Straight or 90°
GSS
80
AC15, DC13
A300
GK
GKM
www.honeywell.com/sensing
AC15, DC13
A600
SAFETY SWITCHES
Switching Options
Special Features
Termination
Snap Action
Make
Before
Break
Break Before Make
1NC/ 2NC/ 1NC/ 2NC/
1NC/ 1NC/ 1NC/ 2NC/ 2NC/ 3NC/
1NC 2NC
4NC
1NO 2NO 1NO 1NO 2NO 1NO
1NO 2NO 1NO 2NO
Page Number
Slow Action
Gold
Contacts
(Low
Energy
Options)
Conduit
93
Conduit
96
M12 or Cable Daisy chain capability
82
85
Conduit
85
86
Conduit
87
Conduit
89
Conduit
Standard
Integral LED option
93
High intensity
multi-cluster LED
95
Conduit
2CPS
GKL/GKR
1CPS
www.honeywell.com/sensing
81
SAFETY SWITCHES
GKM Series
Global Miniature
Safety Key
Operated Switch
Used alone as Category 1 safety components or, in conjunction with other safety switches and our
complete range of safety relays, it is possible to construct comprehensive protection schemes with
Category 2, 3 or 4 compliance.
The preleaded versions are designed to allow rapid fit, easy cable routing and function testing
which cut costs dramatically in OEM applications. Simple upgrade guarding solution for End User
applications.
Low energy basic switches are rated as follows:
Operating Voltage Ue
1 Vdc to 60 Vdc or 1 Vac to 125 Vac
Operating Current Ie
1 mA to 50 mA
Example of catalog listing using a low energy basic switch - GKMA19
Mechanical life:
Sealing:
Operating temperature:
Approvals:
> 1 million
IP66/67, EN 60529, NEMA 1, 12, 13
-25 °C to 85 °C [-13 °F to 185 °F]
CE, UL, CSA
AC15 B300
DC13 Q300
Contacts:
Silver
Low energy
Gold plated
Switching options:
Slow action contacts
1 Normally Closed/1 Normally Open, Break Before Make
1NC/1NO, BBM - GKMF
1NC/1NO, BBM, low energy - GKMA, B, C, D
3
4
1 Brown
Blue 3
2
1
White 2
3
2
4 Black
1
4
2 Normally Closed
2NC, low energy - GKMA, B, C, D
2NC - GKMF
3
2
4
3 2
1 Brown
Blue 3
1
White 2
4 Black
1 4
Electrical ratings:
Designation & Utilization
Category
AC15
AC15
AC15
AC14
A600
A300
B300
D300
DC13
DC13
Q300
R300
IEC 60947-5-1/EN 60947-5-1
Rated operational current le (A)
at rated operational voltage Ue
120 V 240 V 380 V 480 V 500 V 600 V
6
3
1,9
1,5
1,4
1,2
6
3
3
1.5
0,6
0,3
125 V 250 V
0,55
0,27
0,22
0,1
Of key slot
90˚ - Key shown in optional
actuating positions
16 max. /
0.63
Body style 'B'
17,2 /
0.67
1,6 /
0.058
12,8 /
0.504
Key
slot
22,0 /
0.866
10 max. /
0.30
2 X mounting holes
for M4 or #8 screws.
Counter bored both sides
08,3 X 4,5 deep.
0.366 0.177
82
www.honeywell.com/sensing
32 max. /
1.26
37,4 /
1.47
2,3 /
0.69
34 max. /
0.34
VA
rating
Make
Break
7200
720
7200
720
3600
360
432
72
69
28
69
28
SAFETY SWITCHES
OPTIONS
KEY STYLE
Side exit cable
Side exit M12 dc micro-change
connector
Straight key
45 /
1.77
2 + max. /
0.945
3,5 /
0.138
12,8 /
0.504
2,5 /
0.093
CABLE LENGTH
1m
1m
2m
2m
2m
2m
3m
3m
3m
3m
CONTACT
2NC, low energy
1NC/1NO, BBM, low energy
1NC/1NO, BBM
2NC
2NC, low energy
1NC/1NO, BBM, low energy
1NC/1NO, BBM
2NC
2NC, low energy
1NC/1NO, BBM, low energy
CAT. LISTING
GKMA17
GKMA19
GKMA23
GKMA26
GKMA27
GKMA29
GKMA33
GKMA36
GKMA37
GKMA39
Face 'A'
21,3 /
0.638
CONTACT
1NC/1NO, BBM
2NC
2NC, low energy
1NC/1NO, BBM, low energy
CAT. LISTING
GKMC03
GKMC06
GKMC07
GKMC09
15 /
0.59
6,4 min. /
0.252
22 /
0.866
2 holes for M4
or #8 screws
CAT. LISTING
GKZ51M
Stainless steel
Bottom exit M12 dc micro-change
connector
90° key
Bottom exit cable
2 holes for M4
or #8 screws with
45˚ C' SK X 2,1 deep
0.083
14 max. /
0.55
Face 'A'
CONTACT
1NC/1NO, BBM
2NC, low energy
1NC/1NO, BBM, low energy
CABLE LENGTH
1m
1m
1m
1m
2m
2m
2m
2m
3m
3m
3m
3m
CONTACT
1NC/1NO, BBM
2NC
2NC, low energy
1NC/1NO, BBM, low energy
1NC/1NO, BBM
2NC
2NC, low energy
1NC/1NO, BBM, low energy
1NC/1NO, BBM
2NC
2NC, low energy
1NC/1NO, BBM, low energy
CAT. LISTING
GKMB13
GKMB16
GKMB17
GKMB19
GKMB23
GKMB26
GKMB27
GKMB29
GKMB33
GKMB36
GKMB37
GKMB39
CAT. LISTING
GKMD03
GKMD07
GKMD09
22 /
0.866
6,4 min. /
0.252
Dual exit M12 dc micro-change
connector
24 max. /
0.945
Stainless steel
CONTACT
1NC/1NO, BBM
2NC
2NC, low energy
1NC/1NO, BBM, low energy
12,8 /
0.504
32 max. /
1.25
CAT. LISTING
GKZ52M
CAT. LISTING
GKMF03
GKMF06
GKMF07
GKMF09
www.honeywell.com/sensing
83
SAFETY SWITCHES
GSS Series
Hinge Mount Safety
Limit Switch
The Hinge Mount Safety Limit Switch is designed for use on machine access doors as an alternative
solution to key operated interlocks and safety limit switches. When the access door is opened, a
follower pin (not supplied) slides down the slot in the actuator lever, forcing the actuator lever to
rotate and positively open the NC safety circuit to shut off the machine. Closing the access door
rotates the actuator lever to the reset position, closing the NC safety contacts.
The Hinge Mount Safety Limit Switch minimizes alignment problems because it may be offsetmounted from the hinge point of the door. The tamper-resistant design and the positive opening
contacts provide an enhanced level of safety over the conventional spring-driven limit switches often
used to monitor door position.
Low Energy Switching
In today’s demanding age of low energy controls, electromechanical switches are frequently used to
interface directly with safety relays, PLCs and other low energy devices. To accommodate this
requirement GSS offers a new gold plated contact version of the standard basic switch. This
improves reliability of switching at low currents and voltages by protecting the contact surfaces from
contamination during operation or storage prior to use.
Standard silver contacts have a disadvantage in that the contact surface may tarnish under certain
environmental conditions, e.g. in the presence of moisture.
Low energy basic switches are rated as follows:
Operating Voltage Ue
1 Vdc to 60 Vdc or 1 Vac to 125 Vac
Operating Current Ie
1 mA to 50 mA
Example of catalog listing using a low energy basic switch - GSCB33S2.
Switching options:
GSC/D
Snap action contacts (1NC/1NO)
GSE
Slow action contacts (4NC)
11
13
21
14
22 Zb
Slow action contacts (1NC/1NO) BBM
22
31
32 4Y
41
42
Slow action contacts (2NC/2NO) BBM
22
21
12
21
11
12
21
22
2Y, 2X
Zb
13
14
Slow action contacts (2NC)
11
34
44
Slow action contacts (3NC/1NO) BBM
12
2Y
21
33
43
11
12
21
22
31
32
43
44
3Y, 1X
22
Electrical ratings:
Designation & Utilization
Category
84
AC15
AC15
AC15
AC14
A600
A300
B300
D300
DC13
DC13
Q300
R300
IEC 60947-5-1/EN 60947-5-1
Rated operational current le (A)
at rated operational voltage Ue
120 V 240 V 380 V 480 V 500 V 600 V
6
3
1,9
1,5
1,4
1,2
6
3
3
1.5
0,6
0,3
125 V 250 V
0,55
0,27
0,22
0,1
www.honeywell.com/sensing
VA
rating
Make
Break
7200
720
7200
720
3600
360
432
72
69
28
69
28
SAFETY SWITCHES
ACTUATED SWITCHES
GSC Metal body
GSD Plastic body
EN 50047
Safety Standard
Rotated 90° to the left
from center
22 /
0.87
20 /
0.78
24,75 /
0.97
Rotated 90° to the right
from center
104 /
4.09
70 /
2.76
45 /
1.77
3/
0.12
180
MIN
R 2,15 /
0.08
55 /
2.16
GSC - Metal body
GSC - Metal body
30,5 /
1.20
14,5 /
0.57
3,5 /
0.138
30 /
1.18
CONTACT
1NC/1NO
1NC/1NO, BBM
2NC
2NC, low energy
CONDUIT
½ in NPT
½ in NPT
½ in NPT
20 mm
CAT. LISTING
GSCA01S1
GSCA03S1
GSCA06S1
GSCC36S1
GSD - Plastic body
conduit
thread
19,8 /
0.78
ø 23 /
ø 0.9
Mechanical life:
Sealing:
up to 1 million
IP 66
(GSC)
CONTACT
1NC/1NO, BBM
2NC
1NC/1NO, BBM
2NC
1NC/1NO
CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
CAT. LISTING
GSDA03S1
GSDA06S1
GSDB03S1
GSDB06S1
GSDC01S1
CONTACT
1NC/1NO
1NC/1NO, BBM
2NC
2NC, low energy
CONDUIT
½ in NPT
½ in NPT
½ in NPT
PG 13,5
CAT. LISTING
GSCA01S3
GSCA03S3
GSCA06S3
GSCB36S3
GSD - Plastic body
CONTACT
1NC/1NO, BBM
2NC
1NC/1NO, BBM
2NC
1NC/1NO
CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
CAT. LISTING
GSDA03S3
GSDA06S3
GSDB03S3
GSDB06S3
GSDC01S3
Rotated 90° either direction from
center
NEMA 1, 4, 12, 13
(GSD)
Operating temperature:
Approvals:
NEMA 1, 12, 13
-25 °C to 85 °C
[-13 °F to 185 °F]
IEC/EN 60947-5-1
AC15 A300
DC13 Q300
UL, CSA
5,1 /
0.20
11,5 /
0.45
2/
0.08
45 /
1.77
70 /
2.76
90 min.
90 min.
12,5 /
0.49
28 /
24,8 /
0.97
GSC - Metal body
CONTACT
1NC/1NO
1NC/1NO, BBM
2NC
2NC, low energy
CONDUIT
½ in NPT
½ in NPT
½ in NPT
PG 13,5
CAT. LISTING
GSCA01S2
GSCA03S2
GSCA06S2
GSCB36S2
GSD - Plastic body
CONTACT
1NC/1NO, BBM
2NC
1NC/1NO, BBM
2NC
1NC/1NO
CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
CAT. LISTING
GSDA03S2
GSDA06S2
GSDB03S2
GSDB06S2
GSDC01S2
www.honeywell.com/sensing
85
SAFETY SWITCHES
GSE EN 50047
Compatible
Safety 3 Conduit Metal
Standard
12,5 /
0.49
ACTUATED SWITCHES
Rotated 90° to the left
from center
42 /
1.65
40 /
1.57
22 /
0.87
20 /
0.79
24,75 /
0.97
104 /
4.09
70 /
2.76
45 /
1.77
3/
0.12
R 2,15 /
0.08
60 /
2.37
13,75 /
0.54
12 /
0.47
30 /
1.18
2,5 /
0.1
52 /
2.05
57 /
2.24
4/
0.16
65 /
2.56
CONTACT
2NC/2NO, BBM
3NC/1NO, BBM
4NC, low energy
CONDUIT
½ in NPT
½ in NPT
20 mm
CAT. LISTING
GSEA44S1
GSEA46S1
GSEC41S1
conduit
thread
23,8 /
0.94
ø 23 /
ø 0.9
Rotated 90° either direction from
center
5,1 /
0.20
Mechanical life:
up to 1 million
Sealing:
IP 66, NEMA/UL 1, 4, 12, 13
Operating temperature:
-25 °C to 85 °C
[-13 °F to 185 °F]
Approvals:
IEC/EN 60947-5-1
AC15 A300
DC13 Q300
UL, CSA
11,5 /
0.45
2/
0.08
45 /
1.77
70 /
2.76
90 min.
90 min.
12,5 /
0.49
28 /
CONTACT
2NC/2NO, BBM
CONDUIT
½ in NPT
24,8 /
0.97
CAT. LISTING
GSEA44S2
Rotated 90° to the right
from center
180
CONTACT
2NC/2NO, BBM
86
MIN
CONDUIT
½ in NPT
CAT. LISTING
GSEA44S3
www.honeywell.com/sensing
SAFETY SWITCHES
GK Series
Dual Entry Key
Operated Safety
Interlock Switch
The GK Series is designed specifically for use on machines where key removal brings the machine to
an immediate safe condition. It provides enhanced operator safety when added to hinged or sliding
guard doors, screens and protective covers on enclosures. The GK Series is especially well suited for
large door applications, typically in the automotive plant floor environment. Its heavy duty construction
withstands harsh industrial environments where rugged, long-term durability is required.
Nearly 1000 options are available in a simple to understand part number tree.
A safety lockout device is also available for use with the GK Series. The lockout device (GKZL2) is
specifically designed to prevent a key from being inserted either manually, or by the access door
being closed while maintenance personnel are working on the machine. When inserted, the lockout
device can accommodate up to four padlocks to prevent unauthorised removal of the device.
Mechanical life:
up to 15 million
Sealing:
IP 67, NEMA/UL type 1, 4, 12,13
Operating temperature:
-25 °C to 85 °C [-13 °F to 185 °F]
Approvals:
CE, CSA, UL
AC15 A300/A600
DC13 Q300
Contacts:
Silver
Low energy
Gold
Switching options:
Snap action contacts (1NC/1NO)
Snap action contacts (2NC/2NO)
13
Zb
21
13
14
11
12
23
24
21
22
14
22
Slow action contacts (1NC/1NO), BBM
22
21
Slow action contacts (2NC)
21
22
Zb
2Y
Slow action contacts (2NC/2NO), BBM
Slow action contacts (3NC/1NO)
13
12
11
14
11
12
11
12
21
22
21
22
31
32
2y,2x
13
14
23
24
3y,1x
43
44
Slow action contacts (4NC)
11
12
21
22
31
32
41
42
4y
Designation & Utilization
Category
AC15
AC15
AC15
AC14
A600
A300
B300
D300
DC13
DC13
Q300
R300
IEC 60947-5-1/EN 60947-5-1
Rated operational current le (A)
at rated operational voltage Ue
120 V 240 V 380 V 480 V 500 V 600 V
6
3
1,9
1,5
1,4
1,2
6
3
3
1.5
0,6
0,3
125 V 250 V
0,55
0,27
0,22
0,1
www.honeywell.com/sensing
VA
rating
Make
Break
7200
720
7200
720
3600
360
432
72
69
28
69
28
87
SAFETY SWITCHES
Electrical ratings:
GK Series (continued)
Head orientation
OPTIONS
42 /
1.65
Opening to front and top
32 /
1.26
31 /
1.22
45,7
1.80
121,6 /
4.79
Opening to right and top
8/
0.32
9/
0.35
35 /
1.38
60 /
2.36
82 /
3.23
75,9 /
2.99
42,6 /
1.68
ø 5,3 /
0.21
7,3 /
0.29
30 /
1.18
5,3 /
0.21
Standard
CONDUIT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
PG 13,5
PG 13,5
PG 13,5
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
CONTACT
1NC/1NO
1NC/1NO
1NC/1NO
4NC
2NC/2NO, BBM
2NC/2NO, BBM
3NC/1NO, BBM
3NC/1NO, BBM
2NC/NO
4NC, low energy
3NC/1NO, BBM, low energy
1NC/1NO, BBM
1NC/1NO, BBM
2NC
2NC/2NO, BBM
1NC/1NO, BBM
2NC
2NC/2NO, BBM
1NC/1NO
1NC/1NO
1NC/1NO
2NC/NO
4NC, low energy
3NC/1NO, BBM, low energy
2NC
Single LED indicator
KEY
90°
Up-down
None
90°
Straight
90°
Straight
90°
Straight
None
None
Straight
90°
None
Straight
90°
90°
90°
Straight
90°
None
None
None
None
None
CAT. LISTING
GKBA1L7
GKBA1L8-F11*
GKBA1LX
GKBA10L7
GKBA14L6
GKBA14L7
GKBA16L6
GKBA16L7
GKBA2L6
GKBA30LX
GKBA36LX
GKBA3L6
GKBA3L7
GKBA6LX
GKBB14L6
GKBB3L7
GKBB6L7
GKBC14L7
GKBC1L6
GKBC1L7
GKBC1LX
GKBC2LX
GKBC30LX
GKBC36LX
GKBC6LX
Single LED indicator
CONDUIT CONTACT
1/2 NPT
2NC/2NO, BBM
1/2 NPT
1NC/1NO
KEY
Straight
90°
None
None
Straight
Straight
90°
Side-side
None
None
None
None
None
None
CAT. LISTING
GKCA1L6
GKCA1L7
GKCA1LX
GKCA6LX
GKCA10L6
GKCA14L6
GKCA14L7
GKCA14L9
GKCA30LX
GKCA36LX
GKCC1LX
GKCC6LX
GKCC30LX
GKCC36LX
Double LED indicator
CONDUIT CONTACT
1/2 NPT
2NC/2NO, BBM
KEY
90°
CAT. LISTING
GKDA14L7
www.honeywell.com/sensing
CAT. LISTING
GKCA14M6
22 /
0.87
Single LED indicator
CONTACT
1NC/1NO
1NC/1NO
1NC/1NO
2NC
4NC
2NC/2NO, BBM
2NC/2NO, BBM
2NC/2NO, BBM
4NC, low energy
3NC/1NO, BBM, low energy
1NC/1NO
2NC
4NC, low energy
3NC/1NO, BBM, low energy
KEY
straight
Opening to left and top
* fluorocarbon seal
CONDUIT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
20 mm
20 mm
20 mm
20 mm
88
CONDUIT CONTACT
1/2 NPT
2NC/2NO, BBM
KEY
Straight
90°
CAT. LISTING
GKCA14P6
GKCA1P7
Double LED indicator
CONDUIT CONTACT
1/2 NPT
2NC/2NO, BBM
KEY
90°
CAT. LISTING
GKDA14P7
SAFETY SWITCHES
GKL/GKR Series
Dual Entry Solenoid
Key Operated
Safety Interlock
Switch
The GKR (head to the right) and GKL (head to the left) products offer the user an unrivalled range
of standard options.
The GKR/GKL product is a key actuated device incorporating a key trapping mechanism. The
switch is used on machinery where instant stop and access to the machinery is either impossible
(due to the momentum of the machine) or impractical (due to tool or machine damage or
scrapped product if the current machine cycle is interrupted).
The switch incorporates an optional manual override feature which allows removal of the key for
emergency access.
Over 1000 options are available in a simple to understand part number tree.
A safety lockout device is also available for use with the GKR/GKL Series. The lockout device (GKZL2) is
specifically designed to prevent a key from being inserted either manually, or by the access door being
closed while maintenance personnel are working on the machine. When inserted, the lockout device
can accommodate up to four padlocks to prevent unauthorised removal of the device.
Mechanical life:
Sealing:
Operating temperature:
Approvals:
Contacts:
up to 1 million
IP 68, NEMA/UL type 1, 4, 6P, 12,13
-25 °C to 40 °C [-13 °F to 104 °F]
CE, CSA, UL
AC15 A300/A600
DC13 Q300
Silver
Low energy
Gold-plated
Switching options:
Snap Action
Type 11NC/1NO Direct Opening
13
14
21
22 Zb
Slow Acting
Type 3
1NC/1NO, Break before make (BBM)
21
22
13
14
Type 14/15
2NC/2NO, Break before make (BBM)
11
12
21
22
33
34
43
44
2Y, 2X
Zb
2 Slow Acting
Type 36
3NC/1NO, Break before make (BBM),low energy
Type 40
4NC
11
12
11
12
21
22
21
22
31
32
31
32 4Y
41
42
3Y, 1X
43
44
Type 44
2NC/2NO, Break before make (BBM)
11
12
21
22
33
34
43
44
2Y,2X
Type 46
3NC/1NO, Break before make (BBM)
11
12
21
22
31
32
43
44
3Y,1X
www.honeywell.com/sensing
89
SAFETY SWITCHES
GKL/GKR Series (continued)
Key:
Type 6
Type 9
Type X
Straight
Side - side, spring loaded
No key
Latching mechanism:
Type A
Mechanical (solenoid unlock
with screwdriver)
Mechanical (without override)
Electrical (solenoid unlock with
screwdriver)
Type B
Type S
OPTIONS
Opening to front and top
9/
0.35
Solenoid voltage:
Type 2
Type 4
24 Vdc
120 Vac
Electrical ratings:
Designation & Utilization
Category
AC15
AC15
AC15
AC14
A600
A300
B300
D300
DC13
DC13
Q300
R300
IEC 60947-5-1/EN 60947-5-1
Rated operational current le (A)
at rated operational voltage Ue
120 V 240 V
380 V 480 V 500 V 600 V
6
3
1,9
1,5
1,4
1,2
6
3
3
1.5
0,6
0,3
125 V 250 V
0,55 0,27
0,22
0,1
VA
rating
Make
Break
7200
720
7200
720
3600
360
432
72
69
28
69
28
Left
1/2 in - NPT buna-n seals
CONTACT
TYPE
3 (1NC/1NO, BBM)
40 (4NC)
46 (3NC, BBM)
KEY
None
None
None
LATCHING
TYPE
A
A
A
SOLENOID
VOLTAGE
24 Vdc
24 Vdc
24 Vdc
CAT. LISTING
SOLENOID
VOLTAGE
24 Vdc
24 Vdc
CAT. LISTING
GKLE3LXA2
GKLE40LXA2
GKLE46LXA2
Right
1/2 in - NPT buna-n seals
32,5 /
1.28
19 /
0.75
33 /
1.30
CONTACT
TYPE
40 (4NC)
46 (3NC, BBM)
31 /
1.22
43,7 / 2 x 7,3 /
1.72
0.29
2 x ø 5,3 /
0.21
75 /
2.95
2 x 5,3 /
0.21
100 /
3.94
105,3 /
4.13
110 /
4.33
20 /
0.79
90
43 /
1.69
48,8 /
1.92
65 /
2.56 100 /
3.94
110 /
4.33
www.honeywell.com/sensing
KEY
None
None
LATCHING
TYPE
A
A
GKRE40LXA2
GKRE46LXA2
SAFETY SWITCHES
Opening to left and top
Opening to right and top
26 /
1.02
12 /
0.47
Left
1/2 in - NPT buna-n seals
Right
1/2 in - NPT buna-n seals
CONTACT
TYPE
3 (1NC/1NO, BBM)
3 (1NC/1NO, BBM)
3 (1NC/1NO, BBM)
3 (1NC/1NO, BBM)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
KEY
None
None
None
None
None
None
None
LATCHING
TYPE
A
A
S
S
A
A
S
SOLENOID
VOLTAGE
24 Vdc
120 Vac
24 Vdc
120 Vac
24 Vdc
120 Vac
24 Vdc
CAT. LISTING
LATCHING
TYPE
A
A
S
S
A
A
A
S
S
SOLENOID
VOLTAGE
24 Vdc
120 Vac
24 Vdc
120 Vac
24 Vdc
24 Vdc
120 Vac
24 Vdc
120 Vac
CAT. LISTING
GKRE3MXA2
GKRE3MXA4
GKRE3MXS2
GKRE3MXS4
GKRE36MXA2
GKRE36MXA4
GKRE36MXS2
20 mm - buna-n seals
CONTACT
TYPE
1 (1NC/1NO)
1 (1NC/1NO)
1 (1NC/1NO)
1 (1NC/1NO)
3 (1NC/1NO, BBM)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
KEY
None
None
None
None
None
None
None
None
None
CONTACT
TYPE
3 (1NC/1NO, BBM)
3 (1NC/1NO, BBM)
3 (1NC/1NO, BBM)
3 (1NC/1NO, BBM)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
KEY
None
None
None
None
None
None
None
None
LATCHING
TYPE
A
A
S
S
A
A
S
S
SOLENOID
VOLTAGE
24 Vdc
120 Vac
24 Vdc
120 Vac
24 Vdc
120 Vac
24 Vdc
120 Vac
CAT. LISTING
LATCHING
TYPE
A
A
S
S
S
A
A
S
S
B
SOLENOID
VOLTAGE
24 Vdc
120 Vac
24 Vdc
120 Vac
24 Vdc
24 Vdc
120 Vac
24 Vdc
120 Vac
24 Vdc
CAT. LISTING
GKLE3PXA2
GKLE3PXA4
GKLE3PXS2
GKLE3PXS4
GKLE36PXA2
GKLE36PXA4
GKLE36PXS2
GKLE36PXS4
20 mm - buna-n seals
GKRG1MXA2
GKRG1MXA4
GKRG1MXS2
GKRG1MXS4
GKRG3MXA2
GKRG36MXA2
GKRG36MXA4
GKRG36MXS2
GKRG36MXS4
CONTACT
TYPE
1 (1NC/1NO)
1 (1NC/1NO)
1 (1NC/1NO)
1 (1NC/1NO)
3 (1NC/1NO, BBM)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
44 (2NC/2NO, BBM)
www.honeywell.com/sensing
KEY
Non
None
None
None
None
None
None
None
None
None
GKLG1PXA2
GKLG1PXA4
GKLG1PXS2
GKLG1PXS4
GKLG3PXS2
GKLG36PXA2
GKLG36PXA4
GKLG36PXS2
GKLG36PXS4
GKLG44PXB2
91
SAFETY SWITCHES
Keys for GK and
GKL/GKR switches
Straight key
49,8 /
1.96
8,5 /
0.33
Locking slider bolt
with actuating key
77 /
3.03
20 /
0.79
2x ø 5,3 /
0.21
14 /
0.55
15 /
0.59
3x HOLE PROVIDED
FOR LOCKOUT
19,0 /
.75
3/
0.12
CAT. LISTING
GKZ56
90° key
8,5 /
0.33
14 /
0.55
49,8 /
1.96
2 x ø 5,3 /
0.21
40 /
1.57
52 /
2.05
7,0 ±,7 /
.28 ±.03
CAT. LISTING
GKZ57
Spring-loaded key: up/down
4x ø 5,1 /
.20
4,93 /
.194
26,97 / 36,8 /
1.062 1.45
14,0 /
.55
41,81 ±,76 /
1.646 ±.030
115,87 /
4.562
140,0 ±,7 /
5.51 ±.03
12,04 /
.474
13,5 /
0.53
18,5 /
0.73
17,8 /
0.70
37,10 ±1,52 /
1.460 ±.060 26,77 ±1,52 /
1.054 ±.060
8,5 /
0.33
0°key rotation
CAT. LISTING
GKZ71
180° key rotation
CAT. LISTING
GKZ73
90° key rotation
CAT. LISTING
GKZ72
270° key rotation
CAT. LISTING
GKZ74
2 X ø 5,3 /
0.21
84,9 /
3.34
40 /
30 /
1.57
1.18
14 /
0.55
CAT. LISTING
GKZ58
Spring-loaded key: left/right
8,5 /
0.33
84,9 /
3.34
2 X ø 5,3 /
14 /
0.55
0.21
20,5 /
0.81
18,5 /
0.73
13,5 /
0.53
30 /
1.18
40 /
1.57
CAT. LISTING
GKZ59
92
www.honeywell.com/sensing
SAFETY SWITCHES
GKE Series Dual
Entry Safety
Interlock Switch
The GKE Series safety key-operated switch provides enhanced reliability for safety hard-guarding
applications in a compact, cost-effective package.
Mechanical life:
Sealing:
Operating temperature:
Approvals:
1 million
IP 66, NEMA 1, 12,13
-25 °C to 85 °C [-13 °F to 185 °F]
cULus, CE
AC15 A500/A600
DC13 Q300
Switching options:
Switch Code 01: 1NC/1NO
13
14
Zb
21
22
Switch Code 03: 1NC/1NO (BBM)
21
22
Zb
13
14
Switch Code 06: 2NC
21
22
2Y
11
12
Designation & Utilization
Category
AC15
AC15
DC13
A500
A600
Q300
IEC 60947-5-1/EN 60947-5-1
Rated operational current le (A)
at rated operational voltage Ue
24V
120 V 240 V 380 V 480 V 500 V
–
6
3
1,9
1,5
1,4
–
6
3
1,9
1,5
1,4
2,8
0,55
0,27
–
–
–
www.honeywell.com/sensing
600 V
–
1,2
–
93
SAFETY SWITCHES
OPTIONS
Head Code L
Dual Entry, Key Operated
Head Code M
1/2 in NPT conduit
CONTACT TYPE
1NC/1NO
1NC/1NO BBM
2NC
SWITCH CODE
01
01
03
CAT. LISTING
GKEA1LX
GKEC1LX
GKEA3LX
Head Code N
M20 x 1,5 conduit
CONTACT TYPE
1NC/1NO
1NC/1NO BBM
2NC
SWITCH CODE
03
06
06
CAT. LISTING
GKEC3LX
GKEA6LX
GKEC6LX
Head Code P
94
www.honeywell.com/sensing
SAFETY SWITCHES
GKZ51M Key and Mounting
GKZ52M Key and Mounting
90 degree key
Straight key
CAT. LISTING
GKZ52M
CAT. LISTING
GKZ51M
www.honeywell.com/sensing
95
SAFETY SWITCHES
GKN Safety Key
Operated Switch
The GKN Series safety interlock switches provide enhanced reliability in a compact, cost-effective
package size. A black plastic snap fit cover is provided to plug the unused key entry window.
Straight and 90 degree actuator keys are available seperately. The GKN Series conforms to IEC
60947-5-1 and carries cULus and CE approvals.
Mechanical life:
Sealing:
Operating temperature:
Approvals:
1 million
IP 67, NEMA 1, 12,13, 4 (indoor use only)
-25 °C to 85 °C [-13 °F to 185 °F]
cULus, CE
Switching options:
2NC/1NO MBB
1NC/1NO MBB
1NC/1NO BBM
1NC/2NO MBB
2NC
Designation & Utilization
Category
AC15
DC13
96
A600
Q300
IEC 60947-5-1/EN 60947-5-1
Rated operational current le (A)
at rated operational voltage Ue
120 V
125V
240 V
6
–
3
–
0,55
0,27
www.honeywell.com/sensing
600 V
1,2
–
SAFETY SWITCHES
OPTIONS
GKZB1
Dual Entry, Key Operated
Straight stainless steel key
CAT. LISTING
GKZB1
GKZB2
Straight thermoplastic key
M20 x 1,5 conduit
CONTACT TYPE
1NC/1NO BBM
1NC/1NO MBB
2NC/1NO MBB
1NC/2NO MBB
2NC
CAT. LISTING
GKZB2
GKZB6
CONDUIT OPENINGS
3
3
2
2
3
CAT. LISTING
GKNC3L
GKNC4L
GKNC12l
GKNC33L
GKNC6L
Flexible key
www.honeywell.com/sensing
CAT. LISTING
GKZB6
97
98
www.honeywell.com/sensing
SAFETY SWITCHES
CPS Series
Cable Pull Safety
Switch
CPS Series Cable Pull Safety Switches provide a readily accessible emergency stop signal. This is a
cost-effective means compared to using multiple emergency stop push-buttons. (Cable Pull Safety
Switches are not, however, to be used as a means of personnel safeguarding. They may be used to
prevent further injury or damage to equipment when used for emergency stop signaling.)
The CPS Series Cable Pull Safety switch is designed to provide emergency stop protection for
exposed conveyor and assembly lines. The internal mechanism latches on both slackened cable
(push) and pulled cable. This capability also enhances productivity by eliminating nuisance stops due
to variations in temperature, stretch of cable over time, and other application variables.
The 1CPS is intended for use in applications where the cable span is 76 m [250 ft] or shorter. It is a
potential economical solution for shorter runs or zone protection typical to automated systems. The
2CPS series is intended for use in very long cable runs of 152 m [500 ft] or shorter, such as long
conveyor lines found in warehouses.
The CPS complies with: Low Voltage Directive 73/23/EEC, as amended by directive 93/68/EEC;
Machinery Directive 98/37/EEC only as the directives relate to the components being used in a safety
function; IEC/EN 60947-1; IEC/EN 60947-5-1; IEC/EN 60947-5-5.
Mechanical life:
1 000 000
Sealing:
IP67, NEMA 1, 4, 12,13
Operating temperature:
1CPS
-40 °C to 80 °C [-40 °F to 176 °F]
2CPS
-40 °C to 80 °C [-40 °F to 176 °F]
Approvals:
AC15 A300
DC13 Q300
1CPS
UL, CSA
2CPS
UL, CSA
Contacts:
1CPS
Silver
1CPS, Low energy
Gold plated
2CPS
Gold plate over silver
Switching options:
1CPS
2CPS
1NC/1NO
21
22
13
14
N/A
2NC/2NO
21
22
21
22
21
22
21
22
13
14
13
14
13
14
13
14
21
22
11
12
21
22
11
12
13
14
21
22
13
14
21
22
11
12
11
12
11
12
11
12
21
22
21
22
21
22
21
22
3NC/1NO
4NC
2CPS contact block mounting:
1
2
1
To housing
Removable with heavy duty
terminals
2
I
I
1CPS indicator Light Code:
2CPS indicator Light Code:
No letter
A
B
No letter
A
B
www.honeywell.com/sensing
No indicator provided
24 Vdc red LED
120 Vac red LED
No indicator provided
24 Vdc red multi-cluster LED
120 Vac red multi-cluster LED
99
SAFETY SWITCHES
CPS Series (continued)
1CPS
6,35
[0.25]
B
152,4
[6.0]
81,28
[3.2]
SLACK
1CPS
Cable Pull
Switch
88,9
[3.5]
TENSIONED
33,02
[1.3]
RUN
RESET
OFF
99,06
[3.9]
172,72
[6.8]
76,2
[3.0]
4X Ø 7,11
Ø 0.28
50,8
[2.1]
12,7
[0.5]
117,42
[4.623]
A
65,20
[2.567]
56,79
[2.236] 50,83
[2.001]
3X 25,4
[1.0]
2X 26,67
[1.050]
A
B
C
D
25,4
[1.00]
C
25,4
[1.00]
D
Fully extended
Optional indicator
Conduit thread (3 total)
Mounting pad (4 total)
OPTIONS
Cable maintained
1/2 in NPT
CONTACT
1NC/1NO
1NC/1NO
1NC/1NO
2NC/2NO
2NC/2NO
2NC/2NO
3NC/1NO
3NC/1NO
3NC/1NO
4NC
1NC/1NO, low energy
2NC/2NO, low energy
2NC/2NO, low energy
2NC/2NO, low energy
3NC/1NO, low energy
4NC, low energy
100
20 mm
INDICATOR
None
24 V
120 V
None
24 V
120 V
None
24 V
120 V
None
None
None
24 V
120 V
None
None
CAT. LISTING
1CPSA1
1CPSA1A
1CPSA1B
1CPSA2
1CPSA2A
1CPSA2B
1CPSA3
1CPSA3A
1CPSA3B
1CPSA4
1CPSA5
1CPSA6
1CPSA6A
1CPSA6B
1CPSA7
1CPSA8
CONTACT
1NC/1NO
1NC/1NO
2NC/2NO
2NC/2NO
2NC/2NO
3NC/1NO
3NC/1NO
4NC
1NC/1NO, low energy
2NC/2NO, low energy
2NC/2NO, low energy
3NC/1NO, low energy
4NC, low energy
www.honeywell.com/sensing
INDICATOR
None
24 V
None
24 V
120 V
None
24 V
None
None
None
24 V
None
None
CAT. LISTING
1CPSC1
1CPSC1A
1CPSC2
1CPSC2A
1CPSC2B
1CPSC3
1CPSC3A
1CPSC4
1CPSC5
1CPSC6
1CPSC6A
1CPSC7
1CPSC8
SAFETY SWITCHES
2CPS
40,4
(1.60)
67,8
(2.63)
79,8
(3.14)
92,9
(3.66)
325,9 A
(12.75)
152,4
(6.00)
52,1
(2.05)
12,7
(0.50)
18,3
(0.72)
SLACK
RUN
OFF
TENSIONED
34,9
(1.38)
SLACK
TENSIONED
21,1
(0.75)
152,4
(6.00)
2X D
2X
2X
8,9
(0.35)
81,3
(3.20)
40,5
(1.60)
6,9
(0.27)
104,8
(4.13)
2X C
B
6,4
(0.25)
2X 31,75
(1.25)
57,2
(2.25)
12,7
(0.50)
2X D
C
2X 6,9
(0.27)
3X 21,5
(0.85)
139,7
(5.50)
OFF
Cable maintained both sides
1/2 in NPT
CONTACT
2NC/2NO
2NC/2NO
2NC/2NO
3NC/1NO
3NC/1NO
3NC/1NO
2NC/2NO
2NC/2NO
2NC/2NO
3NC/1NO
3NC/1NO
3NC/1NO
CONTACT BLOCK
MOUNTING
1
1
1
1
1
1
2
2
2
2
2
2
INDICATOR
CAT. LISTING
CONTACT
None
24 Vdc
120 Vac
None
24 Vdc
120 Vac
None
24 Vdc
120 Vac
None
24 Vdc
120 Vac
2CPSA1A1
2CPSA1A1A
2CPSA1A1B
2CPSA1B1
2CPSA1B1A
2CPSA1B1B
2CPSA2A1
2CPSA2A1A
2CPSA2A1B
2CPSA2B1
2CPSA2B1A
2CPSA2B1B
2NC/2NO
2NC/2NO
2NC/2NO
3NC/1NO
3NC/1NO
3NC/1NO
2NC/2NO
2NC/2NO
2NC/2NO
2NC/2NO
2NC/2NO
4NC
Fully extended
Optional indicator
C
Conduit thread (3 total)
D
Mounting pad (4 total)
INDICATOR
CAT. LISTING
None
24 Vdc
24 Vdc
2CPSC1A1
2CPSC1A1A
2CPSC1D1A
CONTACT BLOCK
MOUNTING
1
1
1
1
1
1
2
2
2
INDICATOR
CAT. LISTING
None
24 Vdc
120 Vac
None
24 Vdc
120 Vac
None
24 Vdc
120 Vac
2CPSA1A2
2CPSA1A2A
2CPSA1A2B
2CPSA1B2
2CPSA1B2A
2CPSA1B2B
2CPSA2A2
2CPSA2A2A
2CPSA2A2B
INDICATOR
CAT. LISTING
None
24 Vdc
2CPSC1A2
2CPSC1A2A
20 mm
CONTACT
CONTACT BLOCK
MOUNTING
1
1
1
A
B
No actuation right side, cable maintained left side
1/2 in NPT
20 mm
CONTACT
SLACK
RUN
TENSIONED
SLACK
TENSIONED
244,6 A
(9.63)
2NC/2NO
2NC/2NO
CONTACT BLOCK
MOUNTING
1
1
No actuation left side, cable maintained right side
1/2 in NPT
CONTACT
2NC/2NO
2NC/2NO
2NC/2NO
3NC/1NO
3NC/1NO
3NC/1NO
2NC/2NO
2NC/2NO
2NC/2NO
CONTACT BLOCK
MOUNTING
1
1
1
1
1
1
2
2
2
INDICATOR
CAT. LISTING
None
24 Vdc
120 Vac
None
24 Vdc
120 Vac
None
24 Vdc
120 Vac
2CPSA1A3
2CPSA1A3A
2CPSA1A3B
2CPSA1B3
2CPSA1B3A
2CPSA1B3B
2CPSA2A3
2CPSA2A3A
2CPSA2A3B
INDICATOR
CAT. LISTING
None
24 Vdc
2CPSC1A3
2CPSC1A3A
20 mm
CONTACT
2NC/2NO
2NC/2NO
CONTACT BLOCK
MOUNTING
1
1
www.honeywell.com/sensing
101
SAFETY SWITCHES
CPS Series (continued)
Hardware packets (order separately)
CPS LED
31,75
[1.25]
71,88 ±2,54
[2.83 ±0.10]
11,43
[0.45]
C
B
D
A
207,01 ±1,27
[8.15 ±0.05]
227,33 ±12,7
[8.95 ±0.50]
CPS Bracket
ACCESSORY
Cable - 7,6 m [25 ft] length
Cable - 15,2 m [50 ft] length
Cable - 30,5 m [100 ft] length
Cable - 45,7 m [150 ft] length
Cable - 61 m [200 ft] length
Cable - 76,2 m [250 ft] length
(2) Thimbles
(2) Low-profile Duplex Cable Clamps
102
CAT. LISTING
CLSZC1
CLSZC2
CLSZC3
CLSZC4
CLSZC5
CLSZC7
CLSZTC
ACCESSORY
(1) Draw-bar Endspring
(1) J-hook Turnbuckle with Lock Nuts
(2) Thimbles
(2) Low-profile Duplex Cable Clamps
(16) Sets of Cable Supports ((16) 1/4-20 Eye Bolts,
(32) 1/4-20 Nuts, (32) Flat Washers, (16) Lock Washers)
Multicluster LED Accessory - 24 Vdc (conduit mount)
Multicluster LED Accessory - 120 Vdc (conduit mount)
Mounting bracket (to be used with 1CPS or 2CPS)
J-hook turnbuckle with lock nuts (included with 2CPS)
www.honeywell.com/sensing
CAT. LISTING
CPSZ1S
CPSZK1
CPSLED24
CPSLED120
CPS-BRACKET
CPSZTB
BASIC SWITCHES
Basic Switches
These listings include standard size basics, miniature and subminiature
switches. The precision snap-action mechanisms are offered with a wide
variety of actuators and operating characteristics. Basic switches are often
ideal for applications requiring compactness, light weight, accurate
repeatability and long life.
They are best used for presence/absence detection where physical contact
with object is permissible. Very economical.
OPTIONS
Note: BA/BE plunger position distance from mounting hole = 19 mm
[0.75 in]
BZ/BA/BM/BE Series Basic Switches
BZ/BA/BM/BE Series standard basic switches may be used for simple or
precision on/off application needs.
As well as the catalogue listings presented here, we offer other versions with
higher temperature ratings, different termination options, different electrical
ratings and Single Pole, Single Throw (SPST) circuitry. Refer to our Web site
for details.
Voltage:
Electrical rating:
Operating temperature:
Termination:
Contact type:
Approvals:
Switching options:
250 Vac
up to 25 A
-55 °C to 85 °C [-67 ° F to 185 °F]
Screw
Silver
CE, CSA, UL, ENEC
Single pole, double throw (SPDT)
Top pin plunger
Approvals:
BE-2R-A4
ELECTRICAL RATING
15 A
15 A
15 A
15 A
25 A
TERMINATION
Solder
Screw
Solder
Screw
Screw
CSA, UL
CAT. LISTING
BZ-R
BZ-R-A2
BZ-R169
BZ-2R-A2
BE-2R-A4
Overtravel plunger (standard)
ELECTRICAL RATING
15 A
20 A
TERMINATION
Screw
Screw
CAT. LISTING
BZ-2RD-A2
BA-2RB-A2
Panel mount overtravel plunger
ELECTRICAL RATING
15 A
20 A
www.honeywell.com/sensing
TERMINATION
Screw
Screw
CAT. LISTING
BZ-2RQ1-A2
BA-2RQ1-A2
103
BASIC SWITCHES
BASIC SWITCHES
BZ/BA/BM/BE Series (continued)
Overtravel plunger (splash resistant)
ELECTRICAL RATING
15 A
15 A (Stainless steel spring)
Straight lever
TERMINATION
Screw
Screw
CAT. LISTING
BZ-2RDS-A2
BZ-2RDS-A2S
Overtravel roller plunger
ELECTRICAL RATING
15 A
ELECTRICAL RATING
20 A
15 A
15 A
TERMINATION
Screw
Screw
Screw
TERMINATION
Screw
104
APPROVALS
Screw
CAT. LISTING
BA-2RV-A2
BZ-2RW80-A2
BZ-2RW863-A2
Roller lever
CAT. LISTING
BZ-2RQ18-A2
ELECTRICAL RATING
15 A
15 A
15 A (Splash resistant)
15 A
15 A
TERMINATION
Screw
Solder
Screw
Screw
Screw
Overtravel roller plunger, perpendicular
ELECTRICAL RATING
15 A
LEVER RADIUS
63,5 mm [2.5 in]
63,5 mm [2.5 in]
152,4 mm [6.0 in]
CAT. LISTING
BZ-2RQ181-A2
www.honeywell.com/sensing
LEVER RADIUS
26,67 mm [1.05 in]
26,67 mm [1.05 in]
26,67 mm [1.05 in]
One way, 32,0 mm [1.26 in]
48,3 mm [1.9 in]
CAT. LISTING
BZ-2RW822-A2
BZ-2RW822
BZ-2RW8225551-A2
BZ-2RW826-A2
BZ-2RW82-A2
BASIC SWITCHES
DT Series Basic Switches
DT Series standard basic switches consist of two independent single-pole
double throw circuits in one housing actuated by one actuator. The terminals
are separated by a non-conductive shield to reduce shorting.
Voltage:
Electrical rating:
Operating temperature:
Termination:
Contact type:
Approvals:
Switching options:
250 Vac
10 A
-55 °C to 85 °C [-67 ° F to 185 °F]
Screw
Silver
CSA, UL
Double pole, double throw (DPDT)
TB Series Miniature Double-break
Basic Switches
TB Series miniature double-break basic switches are basic double-break
units that offer a means of controlling isolated circuits. Each circuit may be
driven by an independent voltage source.
Voltage:
250 Vac
Electrical rating:
10 A
Operating temperature:
-55 °C to 125 °C [-67 ° F to 257 °F]
Termination:
Solder
Contact type:
Silver
Approvals:
CSA, UL
Switching options:
Single pole, double throw, double break (SPDT DB)
Dimensions in inches
1.825 REF
1.57
0.53
0.50
0.87 DIA HOLE IN TERMINALS (4)
0.13
0.20
0.24
0.15
PLASTIC PLUNGER
0.260
0.22
0.16 R
0.113 ± .002 DIA
0.06 MAX PRETRAVEL
+.002
0.101 - .001
Top pin plunger
ELECTRICAL RATING
10 A
0.46
OPERATING
POSITION 0.312 ± .003
TERMINATION
Screw
CAT. LISTING
DT-2R-A7
4
3
1
2
0.50
0.25
0.03
+.002
0.101 - .001 DIA HOLE
0.365
0.09
0.532 ± .003
1.25
NOTE1 - TERMINALS 1 & 2 NORMALLY CLOSED CIRCUIT
2 - TERMINALS 3 & 4 NORMALLY OPEN CIRCUIT
3 - TERMINALS ARE PLATED FOR SOLDERING
Basic Switch Accessories
A range of accessories is available for BZ, BA, BM, BE and DT switches, such
as the 5PA2 terminal enclosure. For more information please contact your
local sales office.
Top pin plunger
ELECTRICAL RATING
10 A
www.honeywell.com/sensing
TERMINATION
Solder
CAT. LISTING
1TB1-2
105
BASIC SWITCHES
SM and SX Series Subminiature Basic
Switches
SM and SX Series subminiature basic switches may be used for simple
or precision on/off application needs. These switches combine small size
and light weight with ample electrical capacity, precision operation and
long life. The SX Series are small, precision, snap-action switches that are
often ideal where savings in space and weight are important.
Voltage:
Operating temperature:
Termination:
Contact type:
Switching options:
250 Vac
-55 °C to 125 °C [-67 ° F to 257 °F]
Solder
Silver
Single pole, double throw (SPDT)
Roller lever
TERMINATION
ELECTRICAL RATING
Solder/quick connect 5 A
CONTACT TYPE
silver
CAT. LISTING
111SM2-T
SX Series
Approvals:
Electrical rating:
CE, CSA, UL
5A
OPTIONS
SM Series
Approvals:
Electrical rating:
CE, CSA, UL
5A
OPTIONS
Top pin plunger
Approvals: 6SX7-T
CONTACTS
Silver
Silver
Gold
UL, CSA
ELECTRICAL RATING
7A
3A
1A
CAT. LISTING
1SX1-T
11SX1-T
6SX7-T
Top pin plunger
Approvals:
11SM601-H4
TERMINATION
ELECTRICAL RATING
5A
Solder/quick connect 5 A
UL, CSA
CONTACT TYPE
silver
silver
CAT. LISTING
11SM1
11SM601-H4
Straight lever
CONTACT TYPE
Silver
Silver
ELECTRICAL RATING
5A
5A
LEVER LENGTH
‘A’ 12,8 mm
‘A’ 24,5 mm
CAT. LISTING
311SX2-T
311SX3-T
LEVER
Roller
CAT. LISTING
311SX5-T
Straight lever
LEVER LENGTH
4,83 mm
ELECTRICAL RATING
5A
CONTACT TYPE
silver
CAT. LISTING
111SM1
Simulated roller
CONTACT TYPE
Silver
106
ELECTRICAL RATING
5A
www.honeywell.com/sensing
BASIC SWITCHES
UL/CSA
0.1 A or 3 A
OPTIONS
0.1 A, 3 A, 5 A or 10.1 A
125/250 Vac
25 °C to 85 °C [-13 °F to 185 °F]
Quick connect, solder, PCB
Gold or silver
SPDT
12.7
0.5
5.2
0.205
1.12
0.044
5.7
0.224
2.9
0.114
OPTIONS
0.9
0.035
6.5
0.256
5.08
0.2
3.15
0.124
5.08
1.24
0.2
0.049
5.8
0.228
12.8
0.504
1.6
0.063
0.043
3.6
0.138
é0.081
1.1 1.1
é2.05
é2.2
é0.087
0.043
UL/CSA
0.1 A, 5 A or 10.1 A
2.05
0.081
Approvals:
Electrical rating:
1.5
0.059
OP
ZM Series
6.5
0.256
Electrical rating:
Voltage:
Operating temperature:
Termination:
Contact type:
Switching options:
Approvals:
Electrical rating:
PT
ZM, ZX, ZV and ZW Series subminiature basic switches are cost-effective
devices used for simple on/off applications. These switches combine small
size and light weight with ample electrical capability and long life. Plastic
lever capability is available on the ZV Series.
ZX Series
FP
ZM, ZX, ZV and ZW Series Subminiature
Basic Switches
0.4
0.016
Top pin plunger
TERMINATION
PCB
Solder
ELECTRICAL RATING
3A
0.1 A
CONTACT TYPE
silver
gold
CAT. LISTING
ZX40E30A01
ZX10C10A01
PT
6.5
0.256
FP
é2.05
é0.081
é2.2
é0.087
0.9
0.035
6.5
0.256
5.08
0.2
12.8
0.504
3.15
0.124
5.08
1.24
0.2
0.049
5.8
0.228
1.6
0.063
CAT. LISTING
ZM50E70A01
ZM50E10A01
ZM90G20A01
ZM10B10A01
0.043 0.043
CONTACT TYPE
silver
silver
silver
gold
1.1 1.1
ELECTRICAL RATING
5A
5A
10.1 A
0.1 A
5.2
0.205
2.9
0.114
3.6
0.138
Top pin plunger
TERMINATION
Quick connect
Solder
PCB
Solder
1.12
0.044
5.7
0.224
1.5
0.059
2.05
0.081
3.4
0.134
13.0
0.512
OP
12.7
0.5
0.4
0.016
Straight lever
TERMINATION
PCB
Solder
ELECTRICAL RATING
3A
3A
www.honeywell.com/sensing
CONTACT TYPE
silver
silver
CAT. LISTING
ZX40E30C01
ZX40E10C01
107
BASIC SWITCHES
PT
BASIC SWITCHES
11.8
0.465
5.7
0.224
12.7
0.5
0.9
0.035
6.5
0.256
5.08
0.2
3.15
0.124
1.24
0.049
5.8
0.228
5.08
0.2
12.8
0.504
Straight lever
TERMINATION
Quick connect
Solder
ELECTRICAL RATING
5A
5A
0.043
1.6
0.063
0.043
3.6
0.138
é2.05
é0.081
é2.2
é0.087
1.1 1.1
2.05
0.081
6.5
0.256
5.2
0.205
FP
OP
1.12
0.044
3.4
0.134
1.5
0.059
2.9
0.114
0.4
0.016
Simulated roller lever
CONTACT TYPE
silver
silver
CAT. LISTING
ZM50E70D01
ZM50E10D01
TERMINATION
PCB
Solder
ELECTRICAL RATING
3A
3A
CONTACT TYPE
silver
silver
CAT. LISTING
ZX40E30E01
ZX40E10E01
ZV Series
Approvals:
Electrical rating:
UL/ENEC
0.1 A, 5 A or 10.1 A
OPTIONS
Top pin plunger
Simulated roller lever
TERMINATION
Quick connect
Solder
108
ELECTRICAL RATING
5A
5A
CONTACT TYPE
silver
silver
CAT. LISTING
ZM50E70E01
ZM50E10E01
TERMINATION
PCB
Solder
Quick connect
ELECTRICAL RATING
5A
5A
0.1 A
www.honeywell.com/sensing
CONTACT TYPE
silver
silver
gold
CAT. LISTING
ZV50E20A01
ZV50E10A01
ZV10B70A01
BASIC SWITCHES
BASIC SWITCHES
ZW Sealed Series
Approvals:
Electrical rating:
Sealing:
UL/ENEC
0.1 A or 5 A
IP50 and IP67
OPTIONS
Straight lever
TERMINATION
Solder
Quick connect
ELECTRICAL RATING
5A
5A
Top pin plunger
CONTACT TYPE
silver
silver
CAT. LISTING
ZV50E10B01
ZV50E70C01
ELECTRICAL RATING
5A
CONTACT TYPE
silver
CAT. LISTING
ZW50F15AD1
ELECTRICAL RATING
0.1 A
CONTACT TYPE
gold
CAT. LISTING
ZW10E15CD1
ELECTRICAL RATING
0.1 A
CONTACT TYPE
gold
CAT. LISTING
ZW10E90FW1
Straight lever
Roller lever
TERMINATION
PCB
Quick connect
TERMINATION
Solder
ELECTRICAL RATING
5A
5A
CONTACT TYPE
silver
silver
CAT. LISTING
ZV50E20F01
ZV50E70F01
TERMINATION
Solder
Roller lever
TERMINATION
Wire leads
www.honeywell.com/sensing
109
BASIC SWITCHES
BASIC SWITCHES
V7 Series Miniature Basic Switches
Printed circuit board (PO2)
V7 Series basic switches may be used for simple or precision on/off, end
of limit, presence/absence, pressure, temperature and manual operator
interface application needs.
Operating temperature:
-40 °C to 82 °C [-40 °F to 180 °F] (standard)
-40 °C to 200 °C [-40 °F to 350 °F] (high temperature)
Termination:
V7-*A
V7-*B
V7-*C/W
V7-*D
V7-*E
V7-*S
V7-*V
V7-*Z
Printed circuit board (PCB)
and two types of quick connect (QC)
D8, E8: 4,8 mm x 0.5 mm [0.187 in x 0.02 in]
E9: 6,35 mm x 0,80 mm [0.25 in x 0.032 in]
Electrical rating
5A
11 A
15 A
1A
10 A
100 mA
21 A
25 A
Contact Type
Silver
Silver
Silver
Gold alloy
Silver
Gold alloy
Silver alloy
Silver cadmium oxide
Approvals:
V7-*C/W (Electrical ratings)
Switching options:
CSA, UL, ENEC
CSA, UL
These terminals interface with snap-on receptacles and other components
from AMPMODU interconnection system.
PCB terminals are European approved when used with electrical ratings A, B,
D, E, S.
ACTUATION OPTIONS
Single pole double throw (NO and NC) (SPDT)
10,2
.40
AVAILABLE TERMINALS
6,4
.25
20,2
.80
2,8
.11
Quick Connect (QC)
2,8
.11
1,0
.04
2,90
Ø hole (3,10/.122 option)
.114
10,3
.41
2,8
.11
1,5
0.06
8,9
.35
18,2
MAX
.72
NC
COM
2,90
.114 DIA
3,10
.122
OPT
0.187 in wide x 0.020 in thick. D8 terminals are European approved when
used with electrical ratings A, B, D, E or S. International approval agencies
require that switches with these terminals have insulated receptacles or
connector.
0.187 in wide x 0.020 in thick. E8 terminals are European approved when
used with electrical ratings A, B, D, E or S.
22,2
.88
28,8
1.14
2,4
.10
14,4
.57
0,8 (3)
.03
Note: The optional mounting hole dimensions shown above are standard on
V5/V7 International Series switches.
Top pin plunger
CURRENT
5A
5A
11 A
11 A
15 A
15 A
1A
0.1 A
21 A
25 A
0.250 in wide x 0.032 in thick. E9 terminals are European approved when
used with electrical ratings A, B, D, E, S, V or Z.
110
3,20
DIA
.126
3,46
.134
OPT
NO
www.honeywell.com/sensing
TERMINATION
QC (D8)
PCB
QC (D8)
QC (E9)
QC (D8)
QC (E9)
QC (D8)
QC (D8)
QC (E9)
QC (E9)
CAT. LISTING
V7-1A17D8
V7-1A17P02
V7-1B17D8
V7-1B19E9
V7-1C17D8
V7-1C17E9
V7-1D10D8
V7-1S17D8
V7-1V19E9
V7-1Z19E9
BASIC SWITCHES
V7 Series Miniature Basic Switches
(continued)
Straight lever
Type -002
ELECTRICAL RATING
15 A
15 A
11 A
Roller lever
Type -201
TERMINATION
QC (D8)
QC (E9)
QC (E9)
CAT. LISTING
V7-1C17D8-002
V7-1C17E9-002
V7-2B17E9-002
Straight lever
Type -022
ELECTRICAL RATING
5A
11 A
15 A
0.1 A
TERMINATION
QC (D8)
QC (E9)
QC (D8)
QC (D8)
CAT. LISTING
V7-1C17D8-201
V7-1C17E9-201
V7-1S17D8-201
V7-2B17D8-201
TERMINATION
QC (E9)
QC (D8)
QC (E9)
QC (D8)
QC (E9)
QC (D8)
QC (D8)
CAT. LISTING
V7-1B10E9-207
V7-1C17D8-207
V7-1C17E9-207
V7-1S17D8-207
V7-1V1939-207
V7-2A17D8-207
V7-7D17D8-207
TERMINATION
QC (D8)
QC (D8)
QC (D8)
QC (E9)
CAT. LISTING
V7-1B17D8-263
V7-1C17D8-263
V7-1S17D8-263
V7-3S17E9-263
Type -207
TERMINATION
QC (D8)
QC (D8)
QC (D8)
QC (D8)
CAT. LISTING
V7-1A17D8-022
V7-1B19D8-022
V7-1C17D8-022
V7-1S17D8-022
ELECTRICAL RATING
11 A
15 A
15 A
0.1 A
21 A
5A
1A
Simulated roller lever
Type -263
Type -048
ELECTRICAL RATING
11 A
15 A
21 A
11 A
0.1 A
15 A (High temperature)
ELECTRICAL RATING
15 A
15 A
0.1 A
11 A
TERMINATION
QC(D8)
QC(D8)
QC(E9)
QC(E9)
QC(D8)
QC(E9)
CAT. LISTING
V7-1B17D8-048
V7-1C17D8-048
V7-1V19E9-048
V7-2B19E9-048
V7-3S17D8-048
V7-9W1AE9-048
ELECTRICAL RATING
11 A
15 A
0.1 A
0.1 A
www.honeywell.com/sensing
111
BASIC SWITCHES
112
www.honeywell.com/sensing
PRESSURE SWITCHES
Pressure Switches
Honeywell has over 60 years of experience in the pressure switch
industry. A wide variety of pressure ranges, along with a wide choice of
mounting, package, and port configurations allows customers to
choose from standard off-the-shelf designs.
All Honeywell pressure switches feature excellent repeatability, enhanced
accuracy and reliability under varying environmental conditions. In
addition, they feature highly consistent operating characteristics from
one sensor to the next and interchangeability without recalibration.
www.honeywell.com/sensing
113
PRESSURE SWITCHES
Honeywell’s pressure and vacuum switches are designed for use in
heavy duty equipment. They are suitable for potential applications that
are constantly subjected to harsh environments, such as chemical
splashes, salt water or pressure spikes.
Pressure Switches
The products listed are standard switches, but other circuitry and
terminal options are available. Switches can be customised to customer
requirements, contact your local Honeywell sales office for more
information.
Operating temperature:
Termination:
Connector:
Contacts:
Electrical rating:
Resistive
Inductive
Circuitry:
-40 °C to 122 °C [-40 °F to 250 °F]
#8-32 screws
1/8-27 NPT male thread
Silver alloy, gold plated
15 A, 6 Vdc
8 A, 12 Vdc
4 A, 24 Vdc
1 A, 120 Vac
0.5 A, 240 Vac
SPST-NO (Normally open)
SPST-NC (Normally closed)
5000 Series Extended Duty Switch
Set point range 0.5 psi to 150 psi [0.035 bar to 10.35 bar]
This pressure switch was designed to stand up to extended duty
applications. It is factory set but is capable of being field adjusted. The
Kapton diaphragm is compatible with a wide variety of media with the
exception of water. An optional Teflon diaphragm is available when water
is the operating media.
Direct action blade contacts, 2 terminals
58,42
(2.30)
Other options are available - SPDT, NO/NO or NC/NC circuitry and blade
or integral Packard MetriPack terminals - contact Honeywell sales office
for details.
Operating pressure:
Set point range
0.5 psi to 24 psi
[0.0345 bar to 1.656 bar]
25 psi to 150 psi
[1.725 bar to 10.350 bar]
=
=
=
=
Proof pressure:
Burst pressure:
Set point range
150 psi
[10.350 bar]
250 psi
[17.237 bar]
500 psi (34.474 bar]
0.5 psi to 24 psi
[0.0345 bar to 1.656 bar]
25 psi to 150 psi
[1.725 bar to 10.350 bar]
=
=
=
=
750 psi
[51.711 bar]
1250 psi
[86.185 bar]
37,34
(1.47)
SPST-NO
CONTACT SETTING PSI [BAR]
0.5 to 1.0 [0.0345 to 0.069]
1.1 to 3.0 [0.0759 to 0.207]
3.1 to 7.0 [0.2139 to 0.483]
8.0 to 13.0 [0.552 to 0.897]
14.0 to 24.0 [0.996 to 1.656]
25.0 to 50.0 [1.725 to 3.450]
51.0 to 90.0 [3.519 to 6.210]
91.0 to 150.0 [6.279 to 10.350]
FACTORY SET AT PSI [BAR]
1.0 [0.069]
2.0 [0.138]
4.0 [0.276]
10.0 [0.690]
15.0 [1.035]
35.0 [2.415]
60.0 [4.140]
100.0 [6.90]
CAT. LISTING
78628
76051
76575
76576
76052
76053
76054
76055
FACTORY SET AT PSI [BAR]
1.0 [0.069]
2.0 [0.138]
4.0 [0.276]
10.0 [0.690]
15.0 [1.035]
35.0 [2.415]
60.0 [4.140]
100.0 [6.90]
CAT. LISTING
78632
76061
76577
76578
76062
76063
76064
76065
SPST-NC
NOTE
Operating Media (Pressure Switch)
The pressure switch is designed to operate with air, motor oils,
transmission oils, jet fuels and other similar hydrocarbon media.
114
CONTACT SETTING PSI [BAR]
0.5 to 1.0 [0.0345 to 0.069]
1.1 to 3.0 [0.0759 to 0.207]
3.1 to 7.0 [0.2139 to 0.483]
8.0 to 13.0 [0.552 to 0.897]
14.0 to 24.0 [0.996 to 1.656]
25.0 to 50.0 [1.725 to 3.450]
51.0 to 90.0 [3.519 to 6.210]
91.0 to 150.0 [6.279 to 10.350]
www.honeywell.com/sensing
PRESSURE SWITCHES
5000 Series Extended Duty Vacuum Switch
Set point range 1.1 in to 22.0 in Hg
[27,94 mm Hg to 558,80 mm Hg]
The 5000 Series Extended Duty Vacuum switch is designed for vacuum
applications. The factory setting cannot be changed or adjusted in the
field. It features a fluorosilicone rubber diaphragm that is compatible with
a wide range of media.
5000 Series Extended Duty Piston Switch
Set point range 70 psi to 1000 psi [13.80 bar to 68.95 bar]
This switch is a variation of the “standard” 5000 Series Extended duty
switch for applications requiring a compact package size, enhanced set
point and operating characteristics.
Other options are available - SPDT, NO/NO or NC/NC circuitry and blade
terminals - contact Honeywell sales office for details.
Blade terminal option is also available.
Connector
Operating vacuum:
Burst pressure:
1/8-27 NPT Male
30 in Hg [762 mm Hg]
150 psi [10.35 bar]
Direct action blade contacts
Termination:
Connector:
Operating pressure:
Proof pressure:
Burst pressure:
#8-32 screws or 280 Series MetriPack
1/2-20 UNF [O-ring fitted]
1000 psi [68.95 bar]
2000 psi [138.00 bar]
3000 psi [206.84 bar]
OPTIONS
58,42
(2.30)
Standard screw terminal, direct action blade
contacts
62,23
(2.45)
37,34
(1.47)
SPST-NO
Internally grounded, 1 Terminal
2 Terminals
CAT. LISTING
78813
77342
SPST-NC
Internally grounded, 1 Terminal
2 Terminals
CAT. LISTING
78815
77343
37,34
(1.47)
SPST-NO
CONTACT SETTING PSI [BAR]
70 to 400 [13.80 to 27.60]
401 to 800 [27.67 to 55.20]
801 to 1000 [55.27 to 69.00]
APPROX. DIFFERENTIAL PSI [BAR]
30 to 100 [2.07 to 6.90]
40 to 125 [2.76 to 8.625]
50 to 180 [3.45 to 12.42]
CAT. LISTING
79700
79704
79708
APPROX. DIFFERENTIAL PSI [BAR]
30 to 100 [2.07 to 6.90]
40 to 125 [2.76 to 8.625]
50 to 180 [3.45 to 12.42]
CAT. LISTING
79702
79706
79710
SPST-NC
CONTACT SETTING PSI [BAR]
70 to 400 [13.80 to 27.60]
401 to 800 [27.67 to 55.20]
801 to 1000 [55.27 to 69.00]
Metri-Pack terminal, direct action blade contacts
77,47
(3.05)
SPST-NO
CONTACT SETTING PSI [BAR]
200 to 350 [13.80 to 24.15]
351 to 500 [24.22 to 34.50]
501 to 750 [34.57 to 51.75]
37,34
(1.47)
APPROX. DIFFERENTIAL PSI [BAR]
30 to 100 [2.07 to 6.90]
40 to 125 [2.76 to 8.625]
50 to 150 [3.45 to 12.42]
CAT. LISTING
79718
79720
79722
APPROX. DIFFERENTIAL PSI [BAR]
30 to 100 [2.07 to 6.90]
40 to 125 [2.76 to 8.625]
50 to 150 [3.45 to 12.42]
CAT. LISTING
79719
79721
79723
SPST-NC
CONTACT SETTING PSI [BAR]
200 to 350 [13.80 to 24.15]
351 to 500 [24.22 to 34.50]
501 to 750 [34.57 to 51.75]
Mating connector - Packard Part Number 15300027
www.honeywell.com/sensing
115
PRESSURE SWITCHES
5000 Series Ultra Duty Switch
Set point range 10 psi to 400 psi [0.69 bar to 27.60 bar]
The 5000 Series Ultra Duty pressure switch is designed for high
pressure/low set point applications that can experience sudden pressure
spikes and high system pressures. Screw machined and heat treated
components along with a reduced effective area in the pressure cavity
allow improved performance over the standard extended duty 5000
Series.
Other options are available - Dual Circuit (SPDT) configuration and blade
or integral Packard MetriPack terminals - contact Honeywell sales office
for details.
Connector
Operating pressure:
Proof pressure:
Burst pressure:
1/8-27 NPT Male
500 psi [34.50 bar]
2000 psi [138.00 bar]
4000 psi [276.00 bar]
Pressure Switches Customised
The pressure and vacuum switches on the following pages are custom
built to customer specification, therefore minimum order quantities are
required. Catalog listings are for reference only. Standard specification is
shown below, but other contact, termination and connector options are
available. Contact Honeywell for more information.
Operating temperature:
-40 °C to 122 °C
[-40 °F to 250 °F]
8 in (203,2 mm) wire leads - 18 ga
1/8-27 PTF SAE short male thread
Gold over silver
Resistive
15 A, 6 Vdc
8 A, 12 Vdc
4 A, 24 Vdc
Inductive
1 A, 120 Vac
0.5 A, 240 Vac
SPST-NO (Normally open)
SPST-NC (Normally closed)
SPDT (Dual circuit)
Termination:
Connector:
Contacts:
Electrical rating:
Circuitry:
Direct action blade contacts, 2 terminals
Series III
Factory Set Variable Differential
Pressure and Vacuum Switches
58,42
(2.30)
The Series III features a snap action switch with gold contacts that
provides hysteresis, low contact resistance, enhanced transfer time and
an adjustable differential.
37,34
(1.47)
Operating pressure:
Proof pressure:
Burst pressure:
SPST-NO
CONTACT SETTING PSI (BAR]
10 to 35 [0.69 to 2.41]
35 to 75 [2.41 to 5.17]
75 to 150 [5.17 to 10.35]
150 to 250 [10.35 to 17.25]
250 to 400 [17.25 to 27.6]
FACTORY SET AT PSI [BAR]
20 [1.38]
60 [4.14]
100 [6.90]
200 [13.89]
300 [20.70]
CAT. LISTING
83298
83301
83304
83307
83310
FACTORY SET AT PSI [BAR]
20 [1.38]
60 [4.14]
100 [6.90]
200 [13.89]
300 [20.70]
CAT. LISTING
83299
83302
83305
83308
83311
200 psi [13.80 bar]
350 psi [24.13 bar]
500 psi [34.49 bar]
63,50
(2.5)
SPST-NC
CONTACT SETTING PSI [BAR]
10 to 35 [0.69 to 2.41]
35 to 75 [2.41 to 5.17]
75 to 150 [5.17 to 10.35]
150 to 250 [10.35 to 17.25]
250 to 400 [17.25 to 27.6]
42,93
(1.69)
OPTIONS
Pressure switch, snap action contacts
Set point range - 2 psi to 70 psi [0.138 bar to 4.83 bar]
SET POINT RANGE PSI [BAR]
2 to 4 [0.138 to 0.276]
4 to 12 [0.276 to 0.828]
12 to 24 [0.828 to 1.656]
24 to 40 [1.656 to 2.760]
40 to 70 [2.760 to 4.830]
DIFFERENTIAL PSI [BAR]
1 to 1.5 [0.069 to 0.103]
2 to 6 [0.138 to 0.414]
8 to 12 [0.552 to 0.828]
10 to 18 [0.690 to 1.242]
15 to 20 [1.035 to 1.380]
REF. LISTING
120000
120001
120002
120003
120004
Vacuum switch, snap action contacts
Set point range 1.1 in Hg to 22 in Hg [27,94 mm Hg to 558,8 mm Hg]
SET POINT RANGE IN HG [MM HG]
15 in H2O to 36 in H2O [28,025 to 67,259]
2 to 6 [50,8 to 152,4]
6 to 12 [152,4 to 304,8]
12 to 22 [304,8 to 558,8]
116
www.honeywell.com/sensing
DIFFERENTIAL IN HG [MM HG]
4 in H2O to 12 in H2O [7,473 to 22,420]
0.4 to 1 [10,16 to 25,40]
0.4 to 1 [10,16 to 25,4]
0.6 to 1.5 [15,24 to 38,1]
REF. LISTING
120005
120006
120007
120008
PRESSURE SWITCHES
Pressure Switches - Customised
(continued)
Series V
High Pressure, Environmentally Sealed,
Extreme Duty Switches
Set point range 35 psi to 3000 psi [2.415 bar to 206.84 bar]
The Series V features a snap action switch with gold-plated contacts that
provides hysteresis, low contact resistance, enhanced transfer time and
an adjustable differential.
OPTIONS
Diaphragm switch, snap action contacts
Set point range 35 psi to 300 psi [2.415 bar to 20.70 bar]
Piston seal switch, snap action contacts
Set point range 100 psi to 3000 psi [6.90 bar to 206.84 bar]
The diaphragm material is fluorosilicone and is compatible with air,
motor and transmission oil and other hydrocarbon media.
The piston seal is nitrile and is compatible with motor and transmission
oil and other hydrocarbon media. An optional seal is available for use
with brake fluid.
Connector:
Operating pressure:
Proof pressure:
Burst pressure:
1/8-27
300 psi [20.70
500 psi [34.47
2000 psi [138.00
PTF
bar]
bar]
bar]
Connector:
Operating pressure:
Proof pressure:
Burst pressure:
81,03
(3.19)
84,84
(3.34)
30.15
(1.187)
SET POINT RANGE PSI [BAR]
35 to 50 [2.415 to 3.45]
50 to 100 [3.45 to 6.90]
100 to 200 [6.90 to 13.80]
200 to 300 [13.80 to 20.70]
3/4-16 UNF (O-ring fitting)
3000 psi [206.84 bar]
5000 psi [345.00 bar]
10000 psi [690.00 bar]
DIFFERENTIAL PSI [BAR]
10 to 15 [0.690 to 1.035]
10 to 15 [0.690 to 1.035]
10 to 15 [0.690 to 1.035]
10 to 20 [0.690 to 1.380]
30.15
(1.187)
REF. LISTING
26900
26901
26902
26903
SET POINT RANGE PSI [BAR]
100 to 150 [6.90 to 10.35]
150 to 250 [10.35 to 17.25]
250 to 500 [17.25 to 34.50]
500 to 750 [34.50 to 48.30]
750 to 1000 [48.30 to 69.00]
1000 to 1250 [69.00 to 86.25]
1250 to 1500 [86.25 to 103.50]
1500 to 1750 [103.50 to 120.75]
1750 to 2000 [120.75 to 138.00]
2000 to 2250 [138.00 to 155.25]
2250 to 2500 [155.25 to 172.50]
2500 to 2750 [172.50 to 189.75]
2750 to 3000 [189.75 to 206.84]
www.honeywell.com/sensing
DIFFERENTIAL PSI [BAR]
35 to 50 [2.415 to 3.450]
50 to 75 [3.450 to 5.175]
75 to 100 [5.175 to 6.90]
100 to 150 [6.90 to 10.35]
150 to 300 [10.35 to 20.70]
175 to 350 [12.075 to 24.15]
175 to 360 [12.075 to 24.84]
220 to 370 [15.18 to 25.53]
230 to 380 [15.87 to 26.22]
250 to 390 [17.25 to 26.91]
355 to 400 [24.495 to 27.60]
370 to 420 [25.53 to 28.98]
385 to 450 [26.565 to 31.05]
REF. LISTING
26904
26905
26906
26907
26908
26909
26910
26911
26912
26913
26914
26915
26916
117
118
www.honeywell.com/sensing
ENVIRONMENT SEALED SWITCHES
Environment Sealed,
Hermetically Sealed
and Manual switches
Most of the products in this section have one
thing in common - they are sealed to withstand
harsh environments.
You will find them in such diverse places as
landing gears, flaps, cargo doors and cockpit
panels. Environmentally sealed products also
satisfy needs in many other potential
applications. Some examples are agriculture,
transportation, construction, marine, ordnance
and command and control equipment.
Our commitment to quality products begins
with the design of the products. Marketing,
design and manufacturing engineering
personnel review the customer specifications
and translate them into design and
manufacturing instructions. Every product
Honeywell manufactures, be it an aerospace,
industrial or commercial design, follows a
single, uniform system of quality assurance.
This helps ensure the same high level of
reliability in all our products. Our aim is to build
in quality.
We have evaluation test labs that can subject
our designs to most every test and
environmental condition known to exist in our
world or in outer space. Test equipment
includes - electrical and mechanical life cycling
devices, high-low temperature chambers,
hydrostatic pressure chambers, impact shock
machines, vibration equipment, centrifugal
acceleration equipment, humidity and salt
spray chambers, and dielectric strength testing
equipment.
Switch load/life
Switch life depends on such criteria as electrical
load, environment, switch mechanism and other
factors peculiar to the application. As electrical load
increases, switch life decreases. For military
qualification testing 25,000 operations electrical life
at rated load (maximum recommended load) is the
minimum operations required. In most cases
switch life exceeds 25,000 operations when
operated at electrical loads less than rated load.
Below one amp, the electrical life approaches the
mechanical life of the switch. If your application
requires more than 25,000 cycles and your
electrical load is less than rated load, please contact
Honeywell for application assistance.
Sealed basic switches and switch
assemblies
Basic switches are either environment sealed or hermetically sealed. The environment sealed
basics have a watertight seal and most meet military specifications. Limit switches are environment
sealed or hermetically sealed and some are suitable for high temperature applications. Most
switches meet appropriate military requirements. Environment sealed limit switches come in a
choice of sizes and are offered for military aerospace and commercial aircraft applications.
Hermetically sealed switches withstand temperatures up to 125 °C [257 °F], and high temperature
hermetically sealed switches will operate in temperatures up to 334 °F [615 °F].
Manual control switches
Standard size and some miniature toggle switches have bushing seals and are military qualified. Rocker
switches also have a bushing seal. Rockers are easy to remove and are available in a variety of colours.
Magnetically held toggle switches contain a holding coil to maintain the toggle in the operated position.
They have environment sealing, and most are military qualified.
To ensure you have the latest information on
our product offering, contact Honeywell.
www.honeywell.com/sensing
119
SEALED SWITCHES
Basic switches
operating characteristics
Military specifications
procurement information
Electromechanical switches
How to increase your effectiveness
in using specification MIL-PRF8805
Definitions below explain the meaning of operating characteristics. Characteristics shown in tables
throughout this catalog were chosen as most significant. They are taken at normal room temperature
and humidity. These characteristics may vary as temperature and humidity conditions differ.
Sketches show how characteristics are measured for in-line plunger actuation.
Linear dimensions for in-line actuation are from top of plunger to a reference line, usually the
center of the mounting holes.
Differential Travel (D.T.)—Plunger or actuator travel from point where contacts “snap-over” to
point where they “snapback.”
Free Position (F.P.)—Position of switch plunger or actuator when no external force is applied
(other than gravity).
Full Overtravel Force—Force required to attain full overtravel of actuator.
Operating Position (O.P.)—Position of switch plunger or actuator at which point contacts snap
from normal to operated position. Note that in the case of flexible or adjustable actuators, the
operating position is measured from the end of the lever or its maximum length. Location of
operating position measurement shown on mounting dimension drawings.
Operating Force (O.F.)—Amount of force applied to switch plunger or actuator to cause contact
“snap-over.” Note in the case of adjustable actuators, the force is measured from the maximum
length position of the lever.
Overtravel (O.T.)—Plunger or actuator travel safely available beyond operating position.
Pretravel (P.T.)—Distance or angle traveled in moving plunger or actuator from free position to
operating position.
Release Force (R.F.)—Amount of force still applied to switch plunger or actuator at moment contacts
snap from operated position to unoperated position.
Total Travel (T.T.)—Distance from actuator free position to overtravel limit position.
The following information is intended to increase
your effectiveness in using the Specification
MIL-PRF-8805, minimize your costs and
reduce delivery time for switches procured to
the Specification.
Standard items
(shown on QPL 8805)
HONEYWELL suggests the following statement be
used when ordering items appearing on QPL
8805:
“Honeywell” catalog listing No. listed on QPL
8805 as No. .”
Should additional requirements be needed for
application of the switch in its end use, they
should be specifically stated as part of the
ordering information.
Non-standard items
(not shown on QPL 8805)
Honeywell suggests the following statement be
used when ordering items which do not appear on
QPL 8805:
“Switch drawing No. shall meet the following
performance requirements of MIL-PRF-8805.”
In-line plunger actuation
The above statement to be supplemented by
the performance requirements which you
consider applicable.
Why the suggested statements will
minimize cost and delivery of nonstandard items
Military Specification MIL-PRF-8805 requires a
complete qualification test of non-standard items
(unless you specifically call out the performance
requirements which you consider applicable to
your switch application). Complete qualification
is costly and will delay shipment of switches. By
specifying all those requirements which you
consider applicable you can minimize both your
cost and delivery flow time. General statements,
such as “switch must meet requirements of
MIL-PRF-8805”, require complete MIL-PRF8805 qualification tests.
Toggle switch locking configurations
Toggle switches are available with the following locking configurations A
B
D
E
F
G
H
Locked In
Three Positions
Locked In
Center and
Extreme Position
(Keyway Side)
Locked Out
Of Center
Position
Locked In
Center Position
Locked In
Extreme Position
(Opposite Keyway)
Locked In
Extreme Position
(Keyway Side)
Locked Out Of
Center And
Extreme Position
(Keyway Side)
J
K
L
M
N
P
Locked Out Of
Center And
Extreme Position
(Opposite Keyway)
Locked In
Center And
Extreme Position
(Opposite Keyway)
Locked Out Of
Extreme Position
(Keyway Side)
Locked Out Of
And Into
Extreme Position
(Opposite Keyway)
Locked Out Of
Extreme Position
(Opposite Keyway)
Locked Out Of
And Into
Extreme Position
(Keyway Side)
120
www.honeywell.com/sensing
Honeywell believes that you, the user, know
best the specific requirements of your
application. These requirements may be more
or less severe than those reflected by the test
parameters of MIL-PRF-8805. In the interest of
supplying switches which will meet your
requirements with a minimum of expense and
delay, we suggest use of the applicable
statement provided for Standard (QPL) items
and Non-Standard items (not on QPL).
Honeywell solicits submittal of your proposal
prints for review and comment. This review
may result in savings of time and cost for you.
SEALED SWITCHES
SE and XE Series
Environmentally Sealed
Basic Switches
SE and XE Series switches are the smallest, environment sealed switches
offered by Honeywell. They enclose basic switches within a corrosionresistant aluminum housing to seal precision switch contacts from
contamination. SE switches include a SM basic switch; XE switches include
the smaller SX basic switch.
Housing material:
Sealing:
Termination:
Contacts:
Aluminium
Watertight seal per MIL-PRF-8805, symbol 3
305,0 mm [1 ft] leadwire or Solder (turret)
Silver
Switching options:
SPDT
Single Pole, Double Throw
SPNC
Single Pole, Normally Closed
SPNO
Single Pole, Normally Open
Electrical ratings:
www.honeywell.com/sensing
A
5 A res., 3 A ind., (sea level),
5 A res., 2.5 A ind., [50000 ft], 28 Vdc
5 A res., 5 A ind., 125 or 250 Vac, 60 Hz
B
UL/CSA rating - 5A, 250 Vac, 60 Hz
C
7 A res., 4 A ind., (sea level)
7 A res., 2.5 A ind., [50000 ft], 28 Vdc
7 A res., 4 A ind., (sea level)
115 Vac, 400 Hz
D
UL Rating - 7 A, 250 Vac, 60 Hz
E
7 A res., 4 A ind., (sea level)
7 A res., 2.5 A ind., [50000 ft], 28 Vdc
F
1 A res., 0.5 A ind., 28 Vdc
121
SEALED SWITCHES
Top pin plunger
SE Series
OPTIONS
Leadwire
SPDT Single Pole, Double Throw
Leadwire termination
Solder (Turret)
Package size:
Operating temperature:
Standard
Low
Approvals:
Operating force max. (OF):
Standard
Low
High
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
19,05 mm H x 8,64 mm W x 22,35 mm L
[0.75 in H x 0.34 in W x 0.88 in L]
-53 °C to 105 °C [-65 °F to 221 °F]
-26 °C to 80 °C [-15 °F to 185 °F]
UL, CSA (4SE1 only)
1,39 N to 4,73 N [5.0 oz to 17.0 oz]
1,11 N to 2,22 N [4.0 oz to 8.0 oz]
1,39 N to 5,28 N [5.0 oz to 19.0 oz]
1,27 mm [0.050 in]
0,08 mm [0.003 in]
0,10 mm [0.004 in]
FEATURES
Gold contacts
Gold bifurcated contacts
UL/CSA listing/leadwires
Fluorosilicone seal/Low temperature
Low OF
ELECTRICAL RATING
A
F
F
B
A
A
CAT. LISTING
1SE1
1SE7
1SE401
4SE1
5SE1
7SE1
Solder (Turret) termination
FEATURES
Gold contacts
High OF
ELECTRICAL RATING
A
F
A
CAT. LISTING
1SE1-T
1SE61-T
12SE4-T
SPNC Single Pole, Normally Closed
Leadwire termination
ELECTRICAL RATING
A
CAT. LISTING
1SE2
SPNO Single Pole, Normally Open
Leadwire termination
ELECTRICAL RATING
A
122
www.honeywell.com/sensing
CAT. LISTING
1SE3
SEALED SWITCHES
SE Series Auxiliary actuators
(Switches must be ordered separately)
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
3,34 N [12 oz]
3,81 mm [0.150 in]
0,38 mm [0.015 in]
0,64 mm [0.025 in]
Roller leaf
Straight leaf
CAT. LISTING
JE-1
CAT. LISTING
JE-5
Roller leaf , perpendicular
CAT. LISTING
JE-4
www.honeywell.com/sensing
123
SEALED SWITCHES
Top pin plunger
XE Series
OPTIONS
Solder (Turret)
SPDT Single Pole, Double Throw
Leadwire termination
Leadwire
Package size:
Operating temperature:
Standard
High
Low
Approvals:
Operating force max. (OF):
Standard
Low
Pretravel max. (PT):
Standard
Low
Overtravel min. (OT):
Differential travel max. (DT):
19,05 mm H x 8,13 mm W x 15,75 mm L
[0.75 in H x 0.32 in W x 0.62 in L]
-55 °C to 85 °C [-67 °F to 185 °F]
-53 °C to 149 °C [-65 °F to 300 °F]
-26 °C to 85 °C [-15 °F to 185 °F]
UL, CSA (4XE1 only)
1,39 N to 4,73 N [5.0 oz to 17.0 oz]
2,50 N [9 oz]
1,27 mm [0.05
0,76 mm [0.03
0,10 mm [0.004
0,13 mm [0.005
in]
in]
in]
in]
FEATURES
ELECTRICAL
RATING
C
C
F
Gold contacts
Gold bifurcated contacts/
high temperature/1524 mm [6 ft]
leadwire length
Low OF/Low PT/high temperature
UL/CSA listing/leadwires
Fluorosilicone seal/low temperature
MILITARY PART
NUMBER
MS27994-1
MS27994-4
MS27994-5
F
E
D
C
CAT. LISTING
1XE1
1XE201
1XE301
1XE401-6
14XE1
4XE1
5XE1
Solder (Turret) termination
FEATURES
Gold bifurcated contacts/
high temperature
Gold contacts
Low OF/Low PT/high temperature
ELECTRICAL
RATING
A
MILITARY PART
NUMBER
MS27994-3
F
F
E
CAT. LISTING
1XE1-T
1XE401-T
1XE99-T
14XE1-T
SPNO Single Pole, Normally Open
Leadwire termination
ELECTRICAL
RATING
C
124
www.honeywell.com/sensing
MILITARY PART
NUMBER
CAT. LISTING
1XE3
SEALED SWITCHES
XE Series Auxiliary actuators
(Switches must be ordered separately)
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
5,84 N [21 oz]
3,18 mm [0.12 in]
0,23 mm [0.01 in]
0,30 mm [0.01 in]
Straight leaf
10,9
0.43
CAT. LISTING
JM-1
Roller leaf
16,0
0.63
CAT. LISTING
JM-5
www.honeywell.com/sensing
125
SEALED SWITCHES
HM Series
Miniature, Hermetically
Sealed, Basic Switches
Integral lever
OPTIONS
Leadwire termination
HM Series hermetically sealed basic switches contain contacts in a sealed
chamber. A gas-tight seal is maintained while transmitting force and motion
to the switch mechanism through a metal diaphragm.
This series is not generally recommended for 115 Vac, 60 Hz. If you have a
60 Hz application in the mA range, or applications that require the switch to
function electrically during exposure to sub-freezing temperatures, contact
Honeywell for special design variations that are available.
Package size:
Housing material:
Sealing:
Hermetic
Termination:
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
Switching options:
SPDT
18,29 mm H x 6,35 mm W x 22,35 L
(0.72 in H x 0.25 in W x 0.88 in L]
Stainless Steel
MIL-PRF-8805, design symbol 5
Solder or leadwire
1,95 N [7.00 oz]
0,76 mm [0.03 in]
0,08 mm [0.003 in]
0,15 mm [0. 006 in]
Single Pole, Double Throw
CABLE
LENGTH
152,4 mm [6 in]
304,8 mm [1 ft]
304,8 mm [1 ft]
1524,0 mm [5 ft]
ELECTRICAL
RATING
E
C
B
B
MILITARY PART
NUMBER
CABLE
CONTACT
TEMPERATURE ELECTRICAL
LENGTH
MATERIAL
RANGE
RATING
304,8 mm [1 ft] Silver cadmium 3
B
oxide
MILITARY PART
NUMBER
[1]
Electrical ratings:
A
1 A res., 0.25 A ind., (sea level or 70000 ft), 28 Vdc
B
4 A res., 2 A ind., (sea level), 28 Vdc
C
0.5 A res., 0.25 A ind., (sea level or 70000 ft), 28 Vdc
D
3 A res., 1 A ind. (sea level or 70000 ft), 28 Vdc
1 A res., or ind. (sea level), 115 Vac, 400 Hz
E
0.1 A res., 0.1 A ind., 28 Vdc
CONTACT
MATERIAL
Gold
Gold Bifurcated
Silver
Silver
MS27216-2
MS27216-4
CAT. LISTING
114HM1-2 [1]
20HM1-1
2HM19-1
2HM19-5
Mechanical life 100 000 operations
Leadwire, potted
Temperature range:
1
-65 °C to 121 °C [-85 °F to 257 °F]
2
-65 °C to 176 °C [-85 °F to 350 °F]
3
-65 °C to 260 °C [-85 °F to 500 °F]
4
-184 °C to 121°C [-300 °F to 250 °F]
5
-184 °C to 260 °C [-300 °F to 500 °F]
Application notes
1
Honeywell does not recommend the use of silver cadmium oxide switch
contacts in non-arcing loads. Non-arcing loads are generally loads less
than 12 V and/or 0.5 A. Catalog listings in the 5, 6, 15, and16HM Series
use silver cadmium oxide contacts. If you have specific questions,
contact Honeywell.
2
For applications involving non-arcing loads, catalog listings in the 9, 10,
19 and 20HM Series are recommended.
126
TEMPERATURE
RANGE
2
3
1
1
www.honeywell.com/sensing
CAT. LISTING
6HM1-1
SEALED SWITCHES
HM Series, Integral lever (continued)
HM Series Auxiliary actuators
Solder termination
(Switches must be ordered separately)
Operating force max. (OF):
Overtravel min. (OT):
Differential travel max. (DT):
2,50 N [9.0 oz]
0,76 mm [0.030 in]
0,76 mm [0. 030 in]
Straight leaf
CONTACT
MATERIAL
Silver
Gold
Gold Bifurcated
Gold Bifurcated
Gold Bifurcated
Gold Bifurcated
TEMPERATURE
RANGE
4
4
5
5
4
4
ELECTRICAL
RATING
D
A
C
C
C
C
MILITARY PART
NUMBER
MS27216-5
MS27216-6
CAT. LISTING
11HM1
13HM1
19HM1
19HM4 [2]
9HM1
109HM1 [3]
[2]
Only metal and glass material exposed external to switch (i.e. vacuum application consideration)
[3]
Mechanical life 100 000 operations
CAT. LISTING
JS-254
Electrical life 25 000 operations at full rated load
Roller leaf
Solder, weld
8,4
.33
CAT. LISTING
JS-151
Mounting plate
CONTACT
TEMPERATURE
MATERIAL
RANGE
Silver cadmium oxide 3
Silver cadmium oxide 5
ELECTRICAL
RATING
D
D
MILITARY PART
NUMBER
CAT. LISTING
15HM2
15HM5 [2]
A force spreading plate is recommended to reduce the risk of product
damage due to excessive mounting force.
15,75
(0.062)
9,525
(0.375)
0,79
(0.031)
12,19
(0.48)
Ø 2 x 2,39
(0.094)
CAT. LISTING
19PA137-HM
Notice
Torque on #2 mounting screws must be restricted to
0,16 N m [1.5 in lb] max. to prevent switch damage. The
force spreading mounting plate 19PA137-HM will allow up
to 0,28 N m [2.5 in lb] of mounting torque.
www.honeywell.com/sensing
127
SEALED SWITCHES
HS Series
Hermetically Sealed Basic
Switches
HS Series Hermetically Sealed Switches are designed for potential
applications where maximum electrical rating and maximum sealing are
essential, and where size and weight requirements are less critical. These
switches are side-mounted through mounting holes located outside the
sealed switching chamber.
Package size:
OPTIONS
Standard 25,4 mm H x 17,8 mm W x 50,8 mm L
[1.0 in H x 0.7 in W x 2.0 in L]
Housing material:
Stainless Steel, phenolic
Sealing:
Hermetic
MIL-S-8805, design symbol 5
Operating temperature:
Standard
-55 °C to 125 °C
[-67 °F to 250 °F]
High
-55 °C to 149 °C
[-67 °F to 300 °F]
Approvals:
UL, CSA (screw terminals)
Termination:
Screw or leadwire
Operating force max. (OF):
2,78 N to 6,12 N [10 oz to 22 oz]
Pretravel max. (PT):
1,65 mm [0.065 in]
Overtravel min. (OT):
0,25 mm [0.010 in]
Differential travel max. (DT):
0,51 mm [0.020 in]
Contacts:
Silver
Switching options:
SPDT
Single Pole, Double Throw
Electrical ratings:
128
A
25 A res., 8 A ind., 28 Vdc
1 A res., 1 A ind, 115 Vac
UL-CSA rating - 1 A, 125 Vac
B
15 A res., 8 A ind., 28 Vdc
0.5 A res., 1A ind., 125 Vac
C
15 A res., 8 A ind., 28 Vdc
0.5 A res., 1A ind., 125 Vac
UL-CSA rating - 1 A, 125 Vac
D
25 A res., 8 A ind., 28 Vdc
0.5 A res., 1 A ind., 125 Vac
UL-CSA rating - 1A, 125 Vac
Top roller lever
Screw termination
ELECTRICAL
RATING
A
www.honeywell.com/sensing
MILITARY PART
NUMBER
CAT. LISTING
1HS3
SEALED SWITCHES
Integral lever
Leadwire termination
Screw termination
Standard
ELECTRICAL
RATING
A
D
MILITARY PART
NUMBER
MS25011-1
CAT. LISTING
1HS1
101HS1
ELECTRICAL
RATING
B
MILITARY PART
NUMBER
CAT. LISTING
4HS4-118
High Temperature
Operating force (OF):
ELECTRICAL
RATING
C
2,78 N to 8,34 N [10 oz to 30 oz]
MILITARY PART
NUMBER
CAT. LISTING
102HS1
Increased operating force
Operating force (OF):
Pretravel max. (PT):
ELECTRICAL
RATING
A
6,12 N to 7,78 N [22 oz to 28 oz]
2,16 mm [0.85 in]
MILITARY PART
NUMBER
MS25011-4
CAT. LISTING
1HS6
Leaf - added overtravel
Operating force (OF):
Pretravel max. (PT):
Overtravel max. (OT):
Differential travel max. (DT):
ELECTRICAL
RATING
A
1,11 N to 5,56 N [4 oz to 20 oz]
N/A
1,57 mm [0.062 in]
2,54 mm [0.100 in]
MILITARY PART
NUMBER
CAT. LISTING
1HS41
www.honeywell.com/sensing
129
SEALED SWITCHES
HT Series
High Temperature Basic
Switches
HT Series High Temperature Switches are designed to withstand
temperatures up to +538 °C [+1000 °F]. The switching element is
mounted on a ceramic base with a stainless steel enclosure.
Note: HT Series switches are not classified as sealed switches.
Package size:
Standard 31,75 mm H x 17,78 mm W x 49,78 mm L
[1.25 in H x 0.70 in W x 1.96 in L]
Housing material:
Ceramic/Stainless Steel
Sealing:
No
Operating temperature:
538 °C [1000 °F]
Approvals:
UL, CSA
Termination:
Screw
Electrical rating:
3 A, 1/10 HP, 125 Vac
2 A, 1/6 HP, 250 Vac
Switching options:
SPDT
Single Pole, Double Throw
OPTIONS
Top pin plunger, side mount
Top pin plunger, panel mount
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
2,78 N to 5,6 N [10 oz
1,65 mm
4,78 mm
0,25 mm
2,78 N to 5,6 N [10 oz
1,27 mm
0,25 mm
0,25 mm
to 20 oz]
[0.06 in]
[0.19 in]
[0.01 in]
CAT. LISTING
1HT1
to 20
[0.05
[0.01
[0.01
CAT. LISTING
2HT1
Top roller plunger, panel mount
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
8.34 N [30 oz]
1,65 mm [0.06 in]
4,78 mm [0.19 in]
0,254 mm [0.01 in]
CAT. LISTING
3HT1
130
oz]
in]
in]
in]
www.honeywell.com/sensing
SEALED SWITCHES
EN Series
Environment Sealed
Limit Switches
The EN Series Environment-sealed Limit Switch has resilient sealing as defined in MIL-S-8805,
Symbol 4. In addition to the standard versions, miniature housing constructions may be available
with similar actuator styles. The miniature versions may meet the demand for smaller size and
lighter weight without sacrificing performance or electrical capacity. The miniature version housing
is 7,92 mm [0.312 in] smaller in diameter and weighs 14,2 g [0.5 oz] less than the standard
version.
Housing material:
Sealing:
Operating temperature:
Termination:
Stainless Steel
MIL-PRF-8805, design symbol 4
-54 °C to 85 °C [-65 °F to 185 °F]
1,829 m [6 ft] Leadwire (#18 and #20)
Receptacle (bottom or side)
Silver
Hermetic
Contacts:
Switching options:
DPDT
Double Pole, Double Throw
2
1
3
5
4
6
4PDT
4 Pole, Double Throw
2
1
3
5
4
6
8
7
9
11
10
12
1 CKT, DB
Single Pole, Double Throw, Double Break
4
3
1
2
2 CKT, DB
Double Pole, Double Throw, Double Break
2
1
3
6
4
5
7
8
www.honeywell.com/sensing
131
SEALED SWITCHES
Electrical Specifications
The electrical ratings charted below are referenced in the order guides. Refer to
Appropriate MIL specification for ratings applicable to specific switches.
DC Ratings (Amps)
Rating2
Sea Level
Code
Voltage
Inrush
Motor
50,000 Feet
Res.
Ind.
Inrush
Motor
3
Res.
1
Ind.
A
28 Vdc
24
4
4
2
24
4
4
2
B
28 Vdc
36
6
10
3
36
63
10
3
30
3
15
10
1
.5
7
2.5
C
28 Vdc
30
D
28 Vdc
24
E
28 Vdc
F
28 Vdc
5
4
N/A
24
4
15
10
5
3
1
.5
7
5
N/A
N/A
4
24
4
3
Notes:
1
5 amps for rotary switches.
2
For other electrical data, contact your nearest Honeywell office, MIL-S-8805 ratings apply when
this specification is invoked.
3
Application information only.
AC Ratings
Sea Level
Rating
Code
Voltage
A&D
B
C
F
Motor
Make
Break
Res.
Ind.
125/460 Vac @ 60 Hz
24
4
5
3
125 Vac @ 400 Hz
24
4
5
5
125/250 Vac @ 60 Hz
20
3
5
5
460 Vac @ 60 Hz
20
3
3
3
125 Vac @ 400 Hz
36
6
10
6
125/250 Vac @ 60 Hz
20
3
5
5
460 Vac @ 60 Hz
20
3
3
3
125 Vac @ 400 Hz
30
5
10
6
125/460 Vac @ 60 Hz
12
2
2
2
125 Vac @ 400 Hz
24
4
5
5
Explanations of switches with special features
Low force operation (Low OF)
Special spring construction within this switch reduces the normal 6 lb to 12 lb [26,7 N to 53,4 N]
EN operating force to 3 lb to 6 lb[13,3 N to 26,7 N]. This switch is also dimensionally
interchangeable with the standard size 1EN1-6. Low force 600 series ENs have 3 to 6 pounds
[13,3 to 26,7 N] of operating force.
Increased overtravel (High OT)
A longer plunger and bushing on the switch extends the EN overtravel capabilities from the normal
0.25 in to 0.86 in [6,35 mm to 21,8 mm]. The longer bushing also permits additional adjustment
of the plunger position.
High impact shock (High shock)
Catalog listing 1EN75-R3 (M8805/65-001) has been qualified to MIL-PRF-8805, including high
impact shock class H. Other switches rated for high impact shock applications incorporate the
same plunger mechanism and internal switch design as used in the 1EN75-R3 and are expected to
conform to the same requirements.
Switch dimensions
Where there is no dimension drawing shown, combine housing height and diameter with actuator for
overall measurement.
132
www.honeywell.com/sensing
SEALED SWITCHES
EN Series
Standard switches
Operating characteristics (except where specified otherwise )
Operating force max. (OF):
26,69 N to 53,38 N [6 lb to 12
Low
13,3 N to 26,7 N [3 lb to 6
Pretravel max. (PT):
1,02 mm [0.04
Overtravel min. (OT):
6,35 mm [0.25
High
12,7 mm [0.50
Differential travel max. (DT):
0,51 mm [0.020
lb]
lb]
in]
in]
in]
in]
OPTIONS
Top pin plungers
Bottom receptacle
termination
Leadwire termination
Side receptacle
termination
Leadwire #18 wire gage
Leadwire #20 wire gage
Housing
height
1EN1-6/1EN231-6/1EN51-6
Housing
Ø
2EN/3EN/4EN Series
72,4 or 57,4
2.85 2.26
or
45,7
1.8
Pretravel Differential travel
max. (PT)
max. (DT)
Housing
Height
Diameter
2EN
1,27 mm
[0.05 in]
0,89 mm
[0.035 in]
38,1 mm
[1.50 in]
38,1 mm
[1.5 in]
3EN
1,52 mm
[0.06 in]
0,89 mm
[0.035 in]
33,3 mm
[1.31 in]
38,1 mm
[1.5 in]
4EN
1,78 mm
[0.07 in]
1,14 mm
[0.045 in]
43,2 mm
[1.70 in]
38,1 mm
[1.5 in]
1EN61-6/1EN412-3
CIRCUITRY
DPDT
High shock
Low OF
High OT
Gold contacts
ELECTRICAL
RATING
A
DPDT
DPDT
DPDT
DPDT
MILITARY PART
NUMBER
MS24331-1
A
A
A
E
CAT. LISTING
CIRCUITRY
ELECTRICAL
DPDT
1 CKT, DB
2 CKT, DB
B
C
C
MILITARY PART
RATING
MS24331-2
MS24331-3
MS24331-4
CAT. LISTING
NUMBER
2EN1-6
3EN1-6
4EN1-6
1EN1-6
1EN231-6
1EN51-6
1EN61-6
1EN412-3
www.honeywell.com/sensing
133
SEALED SWITCHES
Ball bearing plunger
EN Series
Standard switches (continued)
7,9
0.31
Top pin plungers (continued)
Bottom receptacle
39,1
1.54
UNEF
25,4
1.00
Leadwire #20 wire gage
Housing height:
Diameter:
24,9 mm [0.98 in]
25,4 mm [1.00 in]
CIRCUITRY
MATES WITH
MIL-C-81703,
MS3137E7-50S
OR EQUIVALENT
1EN75-R
DPDT
ELECTRICAL
RATING
A
MILITARY PART
NUMBER
CAT. LISTING
2001EN1-6
Top roller plunger
Leadwire
Bottom
receptacle
MATES WITH
MS3106E-16S-1S
1EN75-R3
CIRCUITRY
High shock
High shock
DPDT
DPDT
ELECTRICAL
RATING
D
D
MILITARY PART
NUMBER
M8805/65-001
CAT. LISTING
1EN75-R
1EN75-R3
Leadwire #20 wire gage
Housing height:
Diameter:
24,9 mm [0.98 in]
25,4 mm [1.00 in]
CIRCUITRY
Side receptacle
1EN76-R
Gold contacts
DPDT
DPDT
ELECTRICAL
RATING
A
E
MILITARY PART
NUMBER
ELECTRICAL
RATING
D
MILITARY PART
NUMBER
CAT. LISTING
21EN9-6
21EN108-6
Bottom receptacle
MATES WITH
MIL-C-81703,
MS3137E7-50S
OR EQUIVALENT
CIRCUITRY
High shock
DPDT
ELECTRICAL
RATING
D
MILITARY PART
NUMBER
CAT. LISTING
CIRCUITRY
1EN76-R
High shock
134
www.honeywell.com/sensing
DPDT
CAT. LISTING
21EN75-R1
SEALED SWITCHES
Rotary linkage lever, adjustable rod
Rotary roller lever
Leadwire termination
Leadwire termination
Leadwire #20 wire gage
Leadwire #20 wire gage
Operating force max. (OF): 1,4 N m to 2,8 N m [12 in lb to 25 in lb]
Pretravel max. (PT):
13° ± 3°
Differential travel max. (DT):
4°
Housing height:
53,6 mm [2.11 in]
Diameter:
25,4 mm [1.00 in]
Operating force max. (OF):
Differential travel max. (DT):
Housing height:
Diameter:
CIRCUITRY
ELECTRICAL
RATING
D
D
DPDT
DPDT
MILITARY PART
CAT. LISTING
NUMBER
MS21320-1 (CW) 31EN11-6
MS21320-2 (CCW) 31EN1-6
Housing
Height
Diameter
32EN
20° ± 4°
6°
68,6 mm [2.70 in] 38,1 mm [1.5 in]
33EN
15° ± 4°
5°
62,0 mm [2.44 in] 38,1 mm [1.5 in]
34EN
15° ± 5°
10°
71,6 mm [2.82 in] 38,1 mm [1.5 in]
DPDT
DPDT
1CKT DB
1CKT DB
2CKT DB
2CKT DB
ELECTRICAL
RATING
A
DPDT
MILITARY PART
NUMBER
MS24420-1
CAT. LISTING
41EN1-6
Leadwire #18 wire gage
0,57 N m [5 in lb]
1,13 N m [10 in lb]
1,4 N m to 2,8 N m [12 in lb to 25 in lb]
Pretravel Differential travel
(PT)
max. (DT)
CIRCUITRY
CIRCUITRY
Operating force max. (OF): 42EN
44EN
Leadwire #18 wire gage
Operating force max. (OF):
0,34 N m [3 in lb]
12°
25,4 mm [1.00 in]
25,4 mm [1.00 in]
ELECTRICAL
RATING
B
B
C
C
C
C
MILITARY PART
NUMBER
MS21320-3 (CW)
MS21320-4 (CCW)
MS21320-5 (CW)
MS21320-6 (CCW)
MS21320-7 (CW)
MS21320-8 (CCW)
Differential travel
max. (DT)
Housing
Height
Diameter
42EN
12°
42,2 mm [1.66 in] 38,1 mm [1.5 in]
44EN
20°
45,7 mm [1.80 in] 38,1 mm [1.5 in]
CAT. LISTING
CIRCUITRY
DPDT
2 CKT DB
ELECTRICAL
RATING
B
C
MILITARY PART
NUMBER
MS24420-2
MS24420-4
CAT. LISTING
42EN1-6
44EN1-6
32EN11-6
32EN1-6
33EN11-6
33EN1-6
34EN11-6
34EN1-6
www.honeywell.com/sensing
135
SEALED SWITCHES
Miniature type EN switches may meet the demand for smaller size and
lighter weight without sacrificing performance or electrical capacity.
These types are of the same construction, seal, and materials as the
standard size EN switches.
EN Series
Miniature switches
Type 400EN switches are directly interchangeable with their standard size
EN counterpart, yet are smaller in diameter and lighter in weight. The
miniature listing housing is 0.312 in [7,92 mm] smaller in diameter, and
the switch weight 1.2 oz [14,2g] less.
Operating temperature:
Top pin plunger
-55 °C to 85 °C
[-67 °F to 185 °F]
Top roller plunger
600EN
Housing
height
Housing
Ø
400EN
Housing
height
Housing
height
Housing Ø
Leadwire #20 wire gage
Housing
Ø
Housing Height
600EN
25,4 mm [1.0 in] 17,5 mm [0.69 in]
624EN
30,5 mm [1.20 in] 25,4 mm [1.0 in]
CIRCUITRY
Gold contacts
400EN
600EN
Leadwire #20 wire gage
Housing Height
Diameter
402EN
24,9 mm [0.98 in] 17,5 mm [0.69in]
404EN
30,5 mm [1.20 in] 25,4 mm [1.0 in]
602EN
25,4 mm [1.0 in] 17,5 mm [0.69 in]
604EN
30,5 mm [1.200 in] 25,4 mm [1.0 in]
CIRCUITRY
Gold contacts
Gold contacts
136
DPDT
4PDT
DPDT
DPDT
4PDT
4PDT
ELECTRICAL
RATING
F
F
F
E
F
E
MILITARY PART
NUMBER
MS21321-1
MS21321-2
MS27240-1
MS27240-5
MS27240-2
MS27240-6
Diameter
622EN
CAT. LISTING
402EN1-6
404EN1-6
602EN1-6
602EN222-6
604EN1-6
604EN222-6
www.honeywell.com/sensing
DPDT
DPDT
4PDT
4PDT
ELECTRICAL
RATING
F
E
F
E
MILITARY PART
NUMBER
MS27240-3
MS27240-7
MS27240-4
MS27240-8
CAT. LISTING
622EN1-6
622EN222-6
624EN1-6
624EN222-6
SEALED SWITCHES
HE Series
Hermetically Sealed, Limit
Switches
The HE Series Hermetically-sealed Limit Switch meets hermetic sealing as
defined in MIL-S-8805, Symbol 5. The HE Series features true hermetic
sealing (metal-to-metal, glass-to metal construction), aimed at providing
maximum sealing effectiveness for exceptionally long periods of time
regardless of constant changes in atmospheric pressures and
temperatures.
Housing material:
Sealing:
Hermetic
A
Switching options:
SPDT
Top pin plunger
1HE1-6
602HE1-6
Stainless Steel
MIL-S-8805, design symbol
5
-55 °C to 125 °C [-67 °F to 257 °F]
Leadwire (x 6)
Operating temperature:
Termination:
Operating force max. (OF):
1HE Series 26,69 N to 53,38 N [6 lb to 12 lb]
600HE Series 22,2 N to 53,38 N [5 lb to 12 lb]
Pretravel max. (PT):
1,02 mm [0.04 in]
Overtravel min. (OT):
1HE Series
6,35 mm [0.25 in]
600HE Series
3,18 mm [0.12 in]
Differential travel max. (DT):
0,51 mm [0.02 in]
Contacts:
Electrical ratings A/B
Silver
Electrical rating C
Gold
Electrical ratings:
OPTIONS
7 A res., 5 A ind., 28 Vdc
B
5 A res., 3 A ind., 28 Vdc
C
1 A res., 0.50 A ind., 28 Vdc
Single Pole, Double Throw
604HE1-6 dimensions as 602HE1-6 except:
FEATURES
3 x leadwires,
gold contacts
Gold contacts
12 x leadwires
ELECTRICAL
RATING
CONTACT
C
B
C
A
A
SPDT
DPDT
DPDT
DPDT
4PDT
Ø 25,4 mm [1.00 in]
Height 30,5 mm [1.20 in]
MILITARY PART
NUMBER
MS8805/80-01
CAT. LISTING
1HE222-6
1HE1-6
602HE106-6
602HE1-6
604HE1-6
Top roller plunger
622HE1-6
DPDT
Double Pole, Double Throw
2
1
3
5
4
6
4PDT
4 Pole, Double Throw
2
1
3
5
4
6
8
624HE1-6 dimensions as 622HE1-6 except:
7
9
11
10
FEATURES
12 x leadwires
ELECTRICAL
RATING
A
A
CONTACT
DPDT
4PDT
Ø 25,4 mm [1.00 in]
Height 30,5 mm [1.20 in]
MILITARY PART
NUMBER
CAT. LISTING
622HE1-6
624HE1-6
12
www.honeywell.com/sensing
137
SEALED SWITCHES
HR Series
Hermetically Sealed, High
Temperature, Limit Switches
OPTIONS
Top pin plunger
Screw termination
CONTACT
DPDT
The HR Series high temperature, hermetically sealed switch is sealed as
defined in MIL-S-8805, Symbol 5. The HR Series combines maximum
sealing, high temperature (315 °C [600 °F]) capabilities and rugged,
heavy duty, corrosion-resistant construction aimed at providing reliable
switching in the most demanding applications.
Housing material:
Sealing:
Operating temperature:
Hermetic
Termination:
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
Contacts:
Electrical rating:
Switching options:
SPDT
MILITARY PART
NUMBER
MS24594-1
CAT. LISTING
MILITARY PART
NUMBER
CAT. LISTING
Leadwire termination
Stainless Steel
MIL-S-8805, design symbol 5
-65 °C to 315 °C
[-85 °F to 600 °F]
Screw or leadwire [1,83 m, 6 ft]
26,69 N to 53,38 N [6 lb to 12 lb]
1,27 mm [0.05 in]
6,35 mm [0.25 in]
0,38 mm [0. 01 in]
Silver
5 A, 28 Vdc
Single Pole, Double Throw
CONTACT
SPDT
DPDT
12HR1-S
Double Pole, Double Throw
2
1
12HR8-6
Top roller plunger, parallel
Screw termination
3
5
4
6
CONTACT
DPDT
138
www.honeywell.com/sensing
MILITARY PART
NUMBER
CAT. LISTING
22HR1-S
MANUAL SWITCHES
The TL Series are military-grade design and environment-proof sealed
toggle switches, qualified to MIL-S-3950. A large selection of circuitries,
lever designs, and electrical terminations are available, with silver or gold
plated contacts to meet a variety of electrical load requirements. They
have high strength, temperature resistant, non-tracking case material.
TL Series
Environment Sealed
Toggle Switches
For options other than those shown below, contact Honeywell for more
information.
IWTS (Integrated Wire Termination System) option
IWTS provides you with a reliable, completely serviceable unit which meets
MIL-S-3950 requirements. IWTS improves maintainability since wiring
bundles need not be disturbed. Leads are quickly and easily assembled or
removed with an insert-extract tool.
A unique three-rib (grommet style) elastomer seal protects the lead
connections without potting. There are no exposed metal terminals.
Versions are available that will accept No.16 wire with M39029/1-102
contact pins or No. 20 wire with M39029/1-101 contact pins. Connections
are resistant to shock, vibration, and high pulling force.
Standard lever - 1, 2 and 4 pole
Approvals:
Sealing:
Operating temperature:
Mounting:
Termination:
Contacts:
Locking lever
IWTS type 1 and 2 pole
UL, CSA, CE
MIL-S-3950
-65 °C to 71 °C
[-85 °F to 160 °F]
Bushing 15/32 in
Solder, Screw,
IWTS (14-16 Gage and 16-20 Gage)
Silver cadmium oxide or gold (gold where indicated)
Electrical ratings (Resistive load):
Values below are based on previous Honeywell testing and opinion. See
MIL-S-3950 for Military specified values.
A
0.5 A to 15 A at 0.5 Vac to 277 Vac|0.75 A at 115 Vdc|
0.5 A to 20 A at 0.5 Vdc to 28 Vdc|0.5 A at 250 Vdc
B
0.5 A to 15 A at 0.5 Vdc to 28 Vdc|0.75 A at 115 Vdc|
0.5 A to 10 A at 0.5 Vac to 277 Vac|0.5 A at 250 Vdc
C
0.75 A at 115 Vdc|0.5 A to 20 A at 0.5 Vdc to 28 Vdc|
0.5 A to 15 A at 0.5 Vac to 277 Vac|0.5 A at 250 Vdc
D
0.5 A to 18 A at 0.5 Vdc to 28 Vdc|0.5 A to 10 A at 0.5 Vac to 277 Vac|
0.5 A at 250 Vdc|0.75 A at 115 Vdc
E
0.5 A to 20 A at 0.5 Vdc to 28 Vdc|0.5 A to 15 A at 0.5 Vac to 277 Vac|
0.5 A at 250 Vdc|0.75 A at 115 Vdc
F
0.75 A at 115 Vdc|0.5 A at 250 Vdc|0.5 A to 10 A at 0.5 Vac to 277 Vac|
0.5 A to 18 A at 0.5 Vdc to 28 Vdc
UL/CSA Rating Code:
L191:
15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac;
1 Hp-250, 277 Vac; 5 A-120 Vac “L”
L192:
10 A-125, 250, 277 Vac; 1/4 Hp-125 Vac;
1/2 Hp-250, 277 Vac; 3 A-125 Vac “L”
Application Note:
Honeywell does not recommend the use of silver cadmium oxide switch
contacts in non-arcing loads. Non-arcing loads are generally loads less than
12 V and/or 0.5 A. TL switches use silver cadmium oxide contact.
If you have specific questions, contact Honeywell.
www.honeywell.com/sensing
139
MANUAL SWITCHES
Standard lever
Terminal circuit identification
One pole
Two pole
Four pole
IWTS (Integrated Wire Termination System)
Panel cutout
With locking ring
Without locking ring
Note:
1,4 mm/.06in MIN DEEP TO ACCOMMODATE LOCKING
RING. 15PA87 PANEL SEAL REQUIRES BLIND HOLE
TO ENSURE SEAL INTEGRITY
Locking lever
Lever locking configurations
Relates to bold digit in Cat. Listing (part number)
A
D
E
Locked In
3 Positions
Locked Out of
Center Position
Locked In
Center Position
F
G
K
Locked In
Center and
Locked In
Locked In
Extreme Position Extreme Position Extreme Position
(Opposite Keyway) (Keyway Side) (Opposite Keyway)
140
www.honeywell.com/sensing
MANUAL SWITCHES
2 Position Switching options/Operating action:
TL Series
2 position switches
SPST
Standard lever
1 pole, screw terminals
CIRCUITRY
SPST
SPST
SPDT
SPDT
OPERATING
ACTION
1
2
3
4
ELECTRICAL
RATING
A
B
A
B
DPST
DPST
OPERATING
ACTION
5
6
ELECTRICAL
RATING
C
D
MILITARY PART
NUMBER
MS24523-22
MS24523-30
MS24523-23
MS24523-26
CAT. LISTING
1TL1-2
1TL1-6
1TL1-3
1TL1-8
DPST
DPDT
OPERATING
ACTION
5
7
ELECTRICAL
RATING
C
C
Opposite
Keyway
Position
2
3
OFF
2 3
ON
Keyway
Position
Opposite
Keyway
Position
1
1
MILITARY PART
NUMBER
MS24524-22
MS24524-30
MILITARY PART
NUMBER
MS27735-22
MS27735-23
CAT. LISTING
UL/CSA
RATING
L191
L191
MILITARY PART
NUMBER
MS27785-22
MS27785-23
CAT. LISTING
12TL1-2
12TL1-3
1
2
OFF
Keyway
Momentary
Position
1
2 3
ON
DPST
Opposite
Keyway
Position
2 3
ON
1
2 3
ON
Double Pole, Single Throw
Opposite
Keyway
Position
Keyway
Position
UL/CSA
RATING
L191
L191
1 2
ON
4
2 3
ON
CAT. LISTING
2TL1-2
2TL1-6
Opposite
Keyway
Position
Single Pole, Double Throw
3
UL/CSA
RATING
L191
L192
Keyway
Momentary
Position
2
SPDT
2 pole, solder terminals
CIRCUITRY
Keyway
Position
1
UL/CSA
RATING
L191
L192
L191
L192
2 pole, screw terminals
CIRCUITRY
Single Pole, SingleThrow
2
5
6
3
2
5
OFF
6
3
Keyway
Momentary
Position
Opposite
Keyway
Position
1
1
6
5
ON
2
5 4
ON
2
5 4
OFF
2 pole, ITWS (16-20 Gage)
CIRCUITRY
DPST
DPDT
OPERATING
ACTION
5
7
ELECTRICAL
RATING
C
C
DPDT
Double Pole, Double Throw
102TL2-2
102TL2-3
4 pole, screw terminals
CIRCUITRY
4PST
4PDT
4PDT
OPERATING
ACTION
8
9
10
ELECTRICAL
RATING
E
E
F
1
7
UL/CSA
RATING
L191
L191
L192
MILITARY PART
NUMBER
MS24525-22
MS24525-23
MS24525-26
CAT. LISTING
4TL1-2
4TL1-3
4TL1-8
Opposite
Keyway
Position
Keyway
Position
6
2
3
1
5 4
ON
6
SPST
SPST
SPDT
SPDT
SPDT
ELECTRICAL
RATING
A
A
A
A
B
8
UL/CSA
RATING
L191
L191
L191
L191
L192
MILITARY PART
NUMBER
MS24658-22D
MS24658-22G
MS24658-23D
MS24658-26F
CAT. LISTING
1TL1-2D
1TL1-2G
1TL1-3D
1TL150-3D[1]
1TL1-8F
Opposite
Keyway
Position
DPST
OPERATING
ACTION
5
ELECTRICAL
RATING
C
MILITARY PART
NUMBER
MS24659-22D
4PDT
[1]
OPERATING
ACTION
9
ELECTRICAL
RATING
E
UL/CSA
RATING
L191
MILITARY PART
NUMBER
MS24660-23D
3
2
6
5
6
5
9
8
9
8
12 11
OFF
12
11
ON
Keyway
Momentary
Position
Opposite
Keyway
Position
3
2
1
3
2
1
6
5
4
6
5
4
Opposite
Keyway
Position
3
2
1
3
2
1
6
5
4
6
5
4
9
8
7
9
8
7
12
11
ON
10
12
11
ON
10
CAT. LISTING
2TL1-2D
4 pole, screw terminals
CIRCUITRY
2
4 Pole, Double Throw
Keyway
Position
UL/CSA
RATING
L191
3
4PDT
2 pole, screw terminals
CIRCUITRY
5 4
ON
4 Pole, Single Throw
Locking lever
1 pole, screw terminals
OPERATING
ACTION
1
1
3
3
4
3
4PST
Keyway
Position
CIRCUITRY
2
CAT. LISTING
9
9
8
7
9
8
7
12
11
ON
10
12
11
ON
10
10
4TL1-3D
FAA-PMA approved, white resilient cap on lever
www.honeywell.com/sensing
141
MANUAL SWITCHES
3 Position Switching options/Operating action:
TL Series
3 position switches
SPST
Standard lever
1 pole, screw terminals
CIRCUITRY
SPST
SPST
SPDT
SPDT
SPDT
OPERATING
ACTION
11
12
13
14
15
SPST
OPERATING
ACTION
11
Keyway
Position
2
3
OFF
2 3
ON
11
ELECTRICAL
RATING
A
B
A
B
B
UL/CSA
RATING
L191
L192
L191
L192
L192
MILITARY PART
NUMBER
MS24523-24
MS24523-28
MS24523-21
MS24523-31
MS24523-27
1TL1-21
1TL1-61
1TL1-1
1TL1-5
1TL1-7
SPDT
UL/CSA
RATING
L191
MILITARY PART
NUMBER
MS27722-24
CAT. LISTING
Keyway
Position
Center
Position
Opposite
Keyway
Position
1
1
1
DPST
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
OPERATING
ACTION
16
17
20
24
17
26
22
23
25
21
18
UL/CSA
RATING
L191
L191
L191
L191
L191
L192
L192
L192
L192
L192
L192
MILITARY PART
NUMBER
MS24524-24
MS24524-21
MS27407-4
MS27407-1
MS24524-23
MS24524-31
MS27407-5
MS27407-2
MS24524-27
MS27407-6
MS24524-26
CAT. LISTING
2 3
OFF
101TL1-21
Opposite
Keyway
Position
1
1
2 3
ON
OPERATING
ACTION
27
2TL1-21
2TL1-1
2TL1-10
2TL1-12
2TL1-3
2TL1-5
2TL1-50
2TL1-56
2TL1-7
2TL1-70
2TL1-8
SPDT
SPDT
OPERATING
ACTION
13
15
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
OPERATING
ACTION
17
20
17
17
19
21
18
Opposite
Keyway
Momentary
Position
1
1
2 3
ON
1
2 3
OFF
Center
Maintained
Position
16
ELECTRICAL
RATING
F
UL/CSA
RATING
L192
MILITARY PART
NUMBER
MS24525-27
CAT. LISTING
4TL1-7
1
17
ELECTRICAL
RATING
A
B
UL/CSA
RATING
L191
L192
MILITARY PART
NUMBER
MS24658-21A
MS24658-27E
CAT. LISTING
1TL1-1A
1TL1-7E
ELECTRICAL
RATING
C
C
C
C
C
D
D
UL/CSA
RATING
L191
L191
L191
L191
L191
L192
L192
MILITARY PART
NUMBER
MS24659-21A
MS27408-4A
MS24659-23D
MS24659-23G
MS24659-33K
MS27408-6E
MS24659-26F
19
Opposite
Keyway
Momentary
Position
Center
Position
1
2
3
1
2
3
1
2
3
6
5
4
6
5
4
6
5
4
9
8
7
9
8
7
9
8
7
1
5 4
ON
6
2
3
2
3
2
6
5
6
5
21
2
1
3
2
1
6
5
4
6
5
4
20
Center
Maintained
Position
Opposite
Keyway
Momentary
Position
3
2
1
3
2
1
6
5
ON
4
6
5
ON
4
6
5
ON
4
Center
Maintained
Position
Opposite
Keyway
Maintained
Position
3
2
1
3
2
1
3
2
1
6
5
ON
4
6
5
ON
4
6
5
ON
4
6
5 4
ON
6
2
3
1
5 4
OFF
6
www.honeywell.com/sensing
22
24
Opposite
Keyway
Momentary
Position
Center
Position
1
1
5 4
ON
6
2
3
5 4
ON
3
5 4
ON
Opposite
Keyway
Maintained
Position
3
2
1
3
2
1
3
2
1
6
5
ON
4
6
5
ON
4
6
5
ON
4
Center
Maintained
Position
Opposite
Keyway
Maintained
Position
3
2
1
3
2
1
3
2
1
6
5
ON
4
6
5
ON
4
6
5
ON
4
Keyway
Maintained
Position
Center
Maintained
Position
Opposite
Keyway
Maintained
Position
3
2
1
3
2
1
3
2
1
6
5
ON
4
6
5
ON
4
6
5
ON
4
Keyway
Momentary
Position
26
2
Center
Maintained
Position
Keyway
Momentary
Position
1
3
3
2
6
2
2
1
18
3
1
Opposite
Keyway
Position
Keyway
Maintained
Position
3
Keyway
Momentary
Position
Keyway
Momentary
Position
5 4
ON
Center
Maintained
Position
Keyway
Momentary
Position
23
3
Opposite
Maintained
Keyway
Position
Keyway
Momentary
Position
25
12 11 10 12 11 10 12 11 10
ON
OFF
ON
3
CAT. LISTING
2TL1-1A
2TL1-10A
2TL1-3D
2TL1-3G
2TL1-31K
2TL1-70E
2TL1-8F
2 3
ON
Opposite
Maintained
Keyway
Position
Opposite
Keyway
Position
2
6
Keyway
Momentary
Position
142
2 3
ON
Double Pole, Double Throw
Keyway
Position
3 Position Switching options/Operating action (continued)
4PDT
4 Pole, Double Throw
27
2 3
OFF
Double Pole, Single Throw
2 pole, screw terminals
CIRCUITRY
1
Keyway
Momentary Center
Position
Position
DPST
Locking lever
1 pole, screw terminals
CIRCUITRY
2 3
ON
15
ELECTRICAL
RATING
C
C
C
C
C
D
D
D
D
D
D
4 pole, screw terminals
CIRCUITRY
1
2
OFF
Keyway
Momentary Center
Position
Position
DPDT
4PDT
1 2
ON
14
2 3
ON
2 pole, screw terminals
CIRCUITRY
Opposite
Keyway
Position
Single Pole, Double Throw
13
ELECTRICAL
RATING
A
Keyway
Momentary
Position
12
CAT. LISTING
1 pole, ITWS (14-16 Gage)
CIRCUITRY
Single Pole, SingleThrow
Opposite
Keyway
Position
1
6
2
Opposite
Keyway
Position
Center
Position
3
1
5 4
ON
6
2
3
1
5 4
OFF
6
2
3
5 4
ON
MANUAL SWITCHES
TW Series
Environment Sealed,
Miniature Toggle Switches
Standard
Standard,
1/4 in bushing
Locking
15/32 in
bushing
TW Series toggle switches are miniature, military grade design and
environment-proof sealed. With silver or gold contacts to meet a variety of
electrical load requirements, options available include IWTS (integrated wire
termination system) versions, a large selection of circuitries, electrical
terminations, lever, and bushing designs. Contact Honeywell for more
information.
Sealing:
Operating temperature:
Mounting:
Termination:
Contacts:
MIL-S-83731(1TW1-3 not sealed)
-65 °C to 71 °C
[-85 °F to 160 °F]
Bushing 15/32 in or 1/4 in
Solder
Fine silver or gold (gold where indicated)
Electrical ratings* (Resistive load):
0.1 A to 5.0 A at 0.5 Vac to 115 Vac|
0.1 A to 5.0 A at 0.5 Vdc to 28 Vdc
* Values are based on previous Honeywell testing and opinion. See
MIL-S-83731 for Military specified values.
Standard lever, 15/32 in bushing
Standard lever, 1/4 in bushing
Panel cutout, 1/4 in bushing
Locking lever, 15/32 in bushing
Without locking ring
With locking ring
Special design - black button
Button
18,03
(0.71) Max.
Keyway
12,70
(0.50)
11,94
(0.470)
Panel cutout, 15/32 in bushing
13,335
(0.525)
Max.
2,54
(0.100)
Min.
Ø12,95 (0.51)
Shoulder
on bushing
18,80
(0.740)
Max.
Ø 1,78
(0.07)
2,5
(0.10)
13,59
(0.535)
Max.
15,60
(0.575)
Max.
Terminal circuit identification
Without locking ring
With locking ring
Note:
1,1 mm/.05 in min. deep to accommodate locking ring.
For switches using panel seal, do not allow thru hole
mounting.
www.honeywell.com/sensing
143
MANUAL SWITCHES
TW Series
2 position switches
TW Series
3 position switches
Standard lever
Standard lever
CIRCUITRY
SPST
Gold plated contacts SPST
SPDT
Gold plated contacts SPDT
DPDT
Gold plated contacts DPDT
Solder T2 type
DPDT
OPERATING
ACTION
1
1
2
2
3
2
3
MILITARY PART
NUMBER
MS27718-22-1
CIRCUITRY
CAT. LISTING
11TW1-2
11TW8-2
11TW1-3
11TW8-3
12TW1-3
12TW8-3
12TW75-3
MS27718-23-1
MS27719-23-1
OPERATING
ACTION
6
5
6
7
10
8
9
8
8
MILITARY PART
NUMBER
MS27718-27-1
SPDT
OPERATING
ACTION
4
MILITARY PART
NUMBER
MS27720-21-1L
11TW1-1L
DPDT
10
MS27754-39M
12TW1-50M
SPDT
Gold plated contactsSPDT
Gold plated contactsSPDT
DPDT
DPDT
DPDT
DPDT
Gold plated contactsDPDT
Solder T2 type
DPDT
CAT. LISTING
11TW1-7
11TW8-5
11TW8-7
12TW1-1
12TW1-50
12TW1-7
12TW1-70
12TW8-7
12TW75-7
MS27719-21-1
MS27753-39
MS27719-27-1
MS27753-40
Standard lever, unsealed
CIRCUITRY
Bushing 1/4 in
SPDT
OPERATING
ACTION
2
MILITARY PART
NUMBER
MS27716-23-1
CAT. LISTING
Locking lever
CIRCUITRY
1TW1-3
Locking lever
CIRCUITRY
SPDT
DPDT
OPERATING
ACTION
2
3
MILITARY PART
NUMBER
MS27720-23-1D
MS27721-23-1D
CAT. LISTING
11TW1-3D
12TW1-3D
Special design lever - black button
CIRCUITRY
OPERATING
ACTION
7
8
DPDT
DPDT
2 Position Switching options/Operating action:
SPST
CAT. LISTING
MILITARY PART
NUMBER
CAT. LISTING
12TW29-1
12TW29-7
Single Pole, Single Throw
Keyway
Position
Opposite
Keyway
Position
2
3
OFF
2 3
ON
3 Position Switching options/Operating action:
SPDT
Single Pole, Double Throw
1
SPDT
Single Pole, Double Throw
Keyway
Position
Opposite
Keyway
Position
1
1
Keyway
Position
Center
Position
Opposite
Keyway
Position
1
1
1
4
Keyway
Momentary Center
Position
Position
Opposite
Keyway
Position
1
1
5
2 3
ON
2 3
OFF
2 3
ON
2
2 3
ON
DPDT
2 3
ON
Double Pole, Double Throw
3
1
6
2
3
1
5 4
ON
6
2
5 4
ON
Lever locking configurations
1
6
Relates to bold digit in Cat. Listing (part number)
L
1
1
2 3
ON
1
2 3
OFF
2
Opposite
Keyway
Position
Center
Position
3
1
5 4
ON
6
2
3
1
5 4
OFF
6
M
Keyway
Momentary
Position
Locked Out of
and Into
Locked In
Locked Out of Extreme Position Extreme Position
Center Position (Keyway Side) (Opposite Keyway)
144
Opposite
Keyway
Momentary
Position
2 3
ON
9
2 3
ON
Double Pole, Double Throw
Keyway
Position
7
D
2 3
OFF
Keyway
Momentary Center
Position
Position
DPDT
3
1
6
Opposite
Keyway
Position
Keyway
Position
2 3
ON
2
Keyway
Momentary
Position
3
5 4
ON
Center
Maintained
Position
Opposite
Keyway
Momentary
Position
1
6
2
2
1
3
2
1
3
2
1
6
5
ON
4
6
5
ON
4
6
5
ON
4
10
Center
Position
3
1
5 4
ON
6
Keyway
Momentary
Position
3
www.honeywell.com/sensing
8
Opposite
Keyway
Momentary
Position
2
3
1
5 4
OFF
6
2
3
5 4
ON
Center
Maintained
Position
Opposite
Keyway
Maintained
Position
3
2
1
3
2
1
3
2
1
6
5
ON
4
6
5
ON
4
6
5
ON
4
MANUAL SWITCHES
AT Series
Toggle Switch Assemblies
Standard
The AT Series provides multi-pole (2, 4, 6, 8 &10) toggle switches that
contain precision basic switches which conserve space and weight. The AT
Series offers a standard lever design along with lever-locking mechanisms
that are sometimes required to prevent inadvertently actuating the toggle
lever when it is not desired to do so. The lever-locking mechanisms require
that the toggle lever must be pulled approximately 2,3 mm [0.09 inches]
to change the position. Other variations include different toggle lever
designs/styles, circuitry variation, toggle lever to bushing seals, etc. The
60AT Series offers qualified versions that meet MIL-S-8805/98
requirements. To find out more about the AT Series variations that are
available, contact Honeywell or visit www.honeywell.com/sensing.
Sealing:
MIL-S-8805/98
Switching options/Operating action:
SPDT
Pull-to-unlock
Single Pole, Double Throw
Maintained
Maintained
NC COM NO
ON
NC COM NO
ON
4PDT, 2 Position
4 Pole, Double Throw
Keyway
Maintained
Opposite
Keyway
Maintained
NC COM NO
NC COM NO
NC COM NO
NC COM NO
NC COM NO
NC COM NO
NC COM NO
ON
NC COM NO
OFF
4PDT, 3 Position
4 Pole, Double Throw
Opposite
Keyway
Momentary
Keyway
Momentary
Center
Maintained
NC COM NO
NC COM NO
NC COM NO
NC COM NO
NC COM NO
NC COM NO
NC COM NO
NC COM NO
NC COM NO
NC COM NO
ON
NC COM NO
ON
NC COM NO
ON
Electrical ratings (Resistive load):
Values below are based on previous Honeywell testing and opinion. See
MIL-S-8805/98 for Military specified values.
www.honeywell.com/sensing
A
0.1 A to1.0 A @ 0.5 Vdc to 28 Vdc
0.1 A to 1.0 A @0.5 Vac to 115 Vac
B
0.1 A to 7.0 A @ 0.5 Vdc to 28 Vdc
145
MANUAL SWITCHES
AT Series
2 toggle positions
AT Series
3 toggle positions
Standard lever
SPDT
Locking lever
4PDT
40˚ Approx. Total Travel
Ø 3,96 (0.156)
1/4-40 UNS
Thread
21,08
(0.83)
9,40
(0.37)
16,66
(0.656)
Hex nut
16,0
(0.63)
17,0
0.67
19,80
(0.78)
9,525
(0.375)
Electrical rating:
Mounting:
Gold contacts
A
Bushing ¼ in
TERMINATION
Solder T type
CAT. LISTING
6AT124-T
4PDT
Electrical rating:
Mounting:
A
Bushing 15/32 in
TERMINATION
H58
Gold contacts/FAA-PMA approved
Panel Cutout
1
/4 in Bushing
6,096
Ø
0.024
17,27
0.68
15
/32 in Bushing
17,0
0.67
Electrical rating:
Mounting:
Silver contacts/FAA-PMA approved
146
B
Bushing 15/32 in
TERMINATION
Quick Connect
CAT. LISTING
64AT22-3
www.honeywell.com/sensing
CAT. LISTING
64AT34-7E
MANUAL SWITCHES
ET Series
Toggle Switches
Environmentally sealed, magnetically held toggle switch. A holding coil
replaces mechanical holding mechanism to maintain the toggle in an operate
position. Available with silver or gold contacts to meet a variety of electrical
load requirements.
Sealing:
Operating temperature:
Standard
Pull-to-unlock
MIL-S-5594
-65 °C to 71 °C
[-85 °F to 160 °F]
Mounting:
Bushing 15/32 in
Termination:
Connector
MS 27478Y10E35P
Leadwire
1,83 m [6 ft],
#20 wire per MIL-W-5086
Screw
4 x 48 UNF x 0.188
Solder (turret)
Plated, use up to #14 wire
Contacts:
Silver or gold (gold where indicated)
Switching options/Operating action:
SPDT
Single Pole, Double Throw
Opposite
Keyway
Position
Solder
Screw
Leadwire
2
1
ON
Keyway
Position
3
2
1
ON
DPDT
3
Double Pole, Double Throw
Opposite
Keyway
Position
Standard
Keyway
Position
2
1
ON
3
2
1
ON
3
5
4
ON
6
5
4
ON
6
4PDT
4 Single Pole, Double Throw
Momentary
Opposite
Keyway
Position
Mechanically
Maintained
Center
Position
Electrically
Maintained
Keyway
Position
Pull-to-unlock
Electrical ratings (Resistive load):
Values below are based on previous Honeywell testing and opinion. See
MIL-S-5594 for Military specified values.
A 0.1 A to 4.0 A @ 0.5 Vdc to 28 Vdc
B 0.1 A to 7.0 A @ 0.5 Vdc to 28 Vdc
C 0.1 A to 5.0 A @ 0.5 Vdc to 28 Vdc
0.1 A to 5.0 A @0.5 Vac to 115 Vac
D 0.1 A to 1.0 A @ 0.5 Vdc to 28 Vdc
www.honeywell.com/sensing
147
MANUAL SWITCHES
ET Series
2 toggle positions
ET Series
3 toggle positions
Standard lever
SPDT
Standard lever
DPDT
Electrical rating:
A
D
Gold contacts
TERMINATION
Gold contacts
Leadwire
Leadwire
Leadwire
Screw
Solder T type
Solder T type
MILITARY PART
NUMBER
M5594/1-1
M5594/1-6
M5594/1-4
M5594/1-3
M5594/1-2
Electrical rating:
CAT. LISTING
TERMINATION
25ET61-6
25ET64-6
25ET62-6
25ET61-S
25ET61-T
25ET117-T
Gold contacts
MILITARY PART
NUMBER
M5594/3-1
Solder T type
Solder T type
TERMINATION
Gold (Bifurcated) contacts
Solder T type
Solder T type
Solder T type
MILITARY PART
NUMBER
M5594/2-1
M5594/2-2
27ET61-T
27ET71-T
Electrical rating:
C
TERMINATION
A
D
Gold contacts
CAT. LISTING
4PDT
DPDT
Electrical rating:
B
D
Gold contacts
Side exit metal tube
MILITARY PART
NUMBER
Leadwire
CAT. LISTING
29ET3
CAT. LISTING
Locking lever
DPDT
26ET61-T
26ET65-T
26ET107-T
Electrical rating:
B
D
Gold contacts
TERMINATION
Locking lever
SPDT
Electrical rating:
A
TERMINATION
MILITARY PART
NUMBER
Solder T type
Screw
MILITARY PART
NUMBER
M5594/6-1E
CAT. LISTING
25ET1-T-F
25ET61-S-F
Lever locking configurations
Relates to bold digit in Cat. Listing (part number)
DPDT
Electrical rating:
A
TERMINATION
Solder T type
Connector
148
Gold contacts
Leadwire
Solder T type
Solder T type
Solder T2 type
MILITARY PART
NUMBER
CAT. LISTING
26ET1-T-F
26ET1-R-F
www.honeywell.com/sensing
CAT. LISTING
27ET2-6-E
27ET61-T-E
27ET71-T-E
27ET118-T2-N
MANUAL SWITCHES
NT Series
Sealed Toggle Switches
Step base,
Panel stand-off
NT Series toggle switches can meet the need for a rugged, cost-effective
toggle switch. Quality construction features include a seal between the
toggle lever and bushing, and between the cover and case. These
switches can be used where panels are subject to splashes, hosedowns,
or outdoor environments. The “Easy-Start” threaded bushing enables
quick alignment of mounting nut to decrease the chance of cross
threading. The panel stand-off with O-ring feature available on some
listings, eliminates the need for behind-the-panel hardware, provides
uniform panel height, and provides a panel to cover seal.
Locking toggle levers prevent accidental toggle movement. The
knobbed, toggle lever must be pulled out to change position.
Approvals:
Sealing:
Operating temperature:
Step base,
no hardware
Mounting:
Termination:
Contacts:
Flat base,
Panel stand-off
UL, CSA
IP 67/68, NEMA 3, 3R, 4, 13
-40 °C to 71 °C
[-40 °F to 160 °F]
Bushing 15/32 in
Solder, Screw, Quick Connect
Silver cadmium oxide (Gold option available)
Note:
Electrical ratings (Resistive load):
Values below are based on previous Honeywell testing and opinion.
No hardware indicates no mounting nuts, keying washer, lockwasher or
termination screws (if applicable).
A
0.5 A to 15 A at 0.5 Vac to 277 Vac|0.75 A at 115 Vdc|
0.5 A to 20 A at 0.5 Vdc to 28 Vdc|0.5 A at 250 Vdc
B
0.5 A to 10 A at 0.5 Vac to 277 Vac|0.5 A to 15 A at 0.5 Vdc to 28
Vdc|
0.5 A at 250 Vdc|0.75 A at 115 Vdc
C
0.75 A at 115 Vdc|0.5 A to 20 A at 0.5 Vdc to 28 Vdc|
0.5 A to 15 A at 0.5 Vac to 277 Vac|0.5 A at 250 Vdc
D
0.5 A to 18 A at 0.5 Vdc to 28 Vdc|0.5 A to 10 A at 0.5 Vac to 277
Vac|
0.5 A at 250 Vdc|0.75 A at 115 Vdc
E
0.5 A to 20 A at 0.5 Vdc to 28 Vdc|0.5 A to 15 A at 0.5 Vac to 277
Vac|
0.5 A at 250 Vdc|0.75 A at 115 Vdc
UL/CSA Rating Code:
L191:
15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac;
1 Hp-250, 277 Vac; 5 A-120 Vac “L”
L192:
10 A-125, 250, 277 Vac; 1/4 Hp-125 Vac;
1/2 Hp-250, 277 Vac; 3 A-125 Vac “L”
Application Note:
Honeywell does not recommend the use of silver cadmium oxide switch
contacts in non-arcing loads. Non-arcing loads are generally loads less
than 12 V and/or 0.5 A. NT switches use silver cadmium oxide contacts,
but gold contact options are available.
If you have specific questions, contact Honeywell.
www.honeywell.com/sensing
149
MANUAL SWITCHES
NT Series, Step base switches
Terminal circuit identification
Standard lever
One pole
Two pole
DIM "A"
1 pole
2 & 4 pole
29,5 mm (1.16 in)
34,4 mm (1.35 in)
Four pole
NOTES:
1. Locking levers have 10,7 mm (0.42 in) Ø
2. Locking ring, lockwasher, 2 hexnuts and
terminal screws are provided unassembled
Panel stand off toggle
To order an NT Series toggle switch with panel stand-off feature, insert “6”
in front of any standard listing.
Example: to order panel stand-off version of standard bushing 1NT1-7, alter
number to 61NT1-7.
Panel cutout
Ø 6,10
(0.24)
17,02
(0.67)
12,45
(0.49)
1,52 (0.06)
7,37 (0.29)
With locking ring
B
A
1 pole
2 pole
DIM "A"
29,5 mm (1.16 in)
34,4 mm (1.35 in)
Solder terminals
7,6
0.3
5,3
0.21
150
Without locking ring
Note:
1,4 mm/.06in MIN DEEP TO ACCOMMODATE LOCKING
RING. 15PA87 PANEL SEAL REQUIRES BLIND HOLE
TO ENSURE SEAL INTEGRITY
3,2
0.12
DIM "B"
23,11 mm (0.91 in)
27,94 mm (1.10 in)
Lever locking configurations
Quick Connect terminals
Relates to bold digit in Cat. Listing (part number)
A
D
Locked In
3 Positions
Locked Out of
Center Position
www.honeywell.com/sensing
E
G
L
Locked Out of
Locked In
Locked In
Extreme Position Extreme Position
Center Position
(Keyway Side)
(Keyway Side)
MANUAL SWITCHES
NT Series, Step base,
2 position switches
2 Position Switching options/Operating action* (1 to 8):
Standard lever
1 pole, screw terminals
No hardware
No hardware
CIRCUITRY
ACTION*
SPST
SPST
SPDT
SPDT
SPDT
SPDT
OPERATING
RATING
1
2
3
3
4
4
SPST
ELECTRICAL
RATING
A
B
A
A
B
B
UL/CSA
L191
L192
L191
L191
L192
L192
SPST
OPERATING
ACTION*
2
ELECTRICAL
RATING
A
1NT1-2
1NT1-6
1NT1-3
1NT1-3-NH
1NT1-8
1NT1-8-NH
SPST
SPDT
OPERATING
ACTION*
1
3
ELECTRICAL
RATING
A
A
Opposite
Keyway
Position
2
3
OFF
2 3
ON
SPDT
UL/CSA
RATING
L191
CAT.LISTING
1NT91-2
UL/CSA
RATING
L191
L191
CAT.LISTING
Keyway
Position
Opposite
Keyway
Position
1
1
3
1
2 3
ON
DPST
No hardware
No hardware
DPST
DPDT
DPDT
DPDT
DPDT
CAT.LISTING
ELECTRICAL
RATING
C
UL/CSA
RATING
L191
CAT.LISTING
2NT1-2
2NT1-3
2NT1-3-NH
2NT1-8
2NT1-8-NH
2
DPDT
OPERATING
ACTION*
6
3
2
5
OFF
6
3
Opposite
Keyway
Position
1
6
2
3
1
5 4
ON
6
2
Keyway
Momentary
Position
3
1
7
5 4
ON
2
6
4PDT
4PDT
OPERATING
ACTION*
8*
UL/CSA
RATING
L191
CAT.LISTING
3
2
1
3
2
1
4NT1-3
6
5
4
6
5
4
9
8
7
9
8
7
12
11
ON
10
12
11
ON
10
8
4 pole, solder terminals
CIRCUITRY
4PDT
OPERATING
ACTION
8*
ELECTRICAL
RATING
E
UL/CSA
RATING
L191
CAT.LISTING
ELECTRICAL
RATING
A
A
UL/CSA
RATING
L191
L191
CAT.LISTING
3
1
5 4
ON
6
2
3
5 4
ON
Opposite
Keyway
Position
Keyway
Position
ELECTRICAL
RATING
E
Opposite
Keyway
Position
4 Pole, Double Throw
4 pole, screw terminals
CIRCUITRY
2 3
ON
Double Pole, Double Throw
Keyway
Position
12NT1-3
1
5
ON
DPDT
6
CIRCUITRY
2 3
ON
Opposite
Keyway
Position
Keyway
Position
2 pole, solder terminals
Opposite
Keyway
Position
Double Pole, Single Throw
5
UL/CSA
RATING
L191
L191
L191
L192
L192
1
2
OFF
4
2 3
ON
11NT1-2
11NT1-3
ELECTRICAL
RATING
C
C
C
D
D
1 2
ON
Keyway
Momentary
Position
6
OPERATING
ACTION*
5
6
6
7
7
Opposite
Keyway
Position
Single Pole, Double Throw
2 pole, screw terminals
CIRCUITRY
Keyway
Momentary
Position
2
1
1 pole, solder terminals
CIRCUITRY
Keyway
Position
CAT.LISTING
1 pole, Quick Connect terminals
CIRCUITRY
Single Pole, SingleThrow
14NT1-3
Locking lever
1 pole, screw terminals
CIRCUITRY
SPST
SPDT
OPERATING
ACTION*
1
3
1NT1-2G
1NT1-3D
* Operating action 1 to 8
www.honeywell.com/sensing
151
MANUAL SWITCHES
NT Series, Step base,
3 position switches
3 Position Switching options/Operating action** (9 to 18):
Standard lever
1 pole, screw terminals
CIRCUITRY
No hardware
Panel stand off
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
OPERATING
ACTION**
9
10
11
11
11
11
SPDT
ELECTRICAL
RATING
A
B
B
B
B
D
UL/CSA
RATING
L191
L192
L192
L192
L191
L192
Single Pole, Double Throw
CAT. LISTING
1NT1-1
1NT1-5
1NT1-7
1NT1-7-NH
1NT231-7
61NT1-7
Keyway
Position
Center
Position
Opposite
Keyway
Position
1
1
1
SPDT
OPERATING
ACTION**
11
ELECTRICAL
RATING
B
UL/CSA
RATING
L192
2 3
ON
2 3
OFF
No hardware
SPDT
SPDT
OPERATING
ACTION**
11
11
ELECTRICAL
RATING
B
B
UL/CSA
RATING
L192
L192
CAT. LISTING
1
1
No hardware
No hardware
Gold contacts/
long lever
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
OPERATING
ACTION**
12
12
13
17
15
16
16
14
16
14
1
12
ELECTRICAL
RATING
C
C
C
D
D
D
D
D
D
D
UL/CSA
RATING
L191
L191
L191
L192
L192
L192
L192
L192
L192
L192
CAT. LISTING
UL/CSA
RATING
L192
CAT. LISTING
2NT1-1
2NT1-1-NH
2NT1-10
2NT1-5
2NT1-50
2NT1-7
2NT1-7-NH
2NT1-70
2NT231-7
2NT889-70
2 3
OFF
2 3
ON
2 3
ON
1
2 3
OFF
Opposite
Keyway
Position
2
6
3
1
5 4
ON
6
Keyway
Momentary
Position
14
2 3
ON
Double Pole, Double Throw
Keyway
Position
CIRCUITRY
1
Opposite
Keyway
Momentary
Position
DPDT
11NT1-7
11NT1-7-NH
2 pole, screw terminals
1
2 3
ON
11
1NT91-7
CAT. LISTING
1
2 3
ON
Keyway
Momentary Center
Position
Position
1 pole, solder terminals
CIRCUITRY
Opposite
Keyway
Position
10
9
1 pole, Quick Connect terminals
CIRCUITRY
Keyway
Momentary Center
Position
Position
2
Keyway
Maintained
Position
3
13
5 4
ON
Center
Maintained
Position
Opposite
Keyway
Momentary
Position
2
1
3
2
1
3
2
1
6
5
ON
4
6
5
ON
4
6
5
ON
4
15
Opposite
Keyway
Maintained
Position
3
2
1
3
2
1
3
2
1
6
5
ON
4
6
5
ON
4
6
5
ON
4
Keyway
Momentary
Position
3
Center
Maintained
Position
Center
Maintained
Position
Opposite
Keyway
Maintained
Position
3
2
1
3
2
1
3
2
1
6
5
ON
4
6
5
ON
4
6
5
ON
4
2 pole, Quick Connect terminals
CIRCUITRY
DPDT
OPERATING
ACTION**
16
ELECTRICAL
RATING
D
Keyway
Momentary
Position
2NT91-7
16
4 pole, screw terminals
CIRCUITRY
4PDT
OPERATING
ACTION**
18
1
6
ELECTRICAL
RATING
E
UL/CSA
RATING
L191
2
Opposite
Keyway
Momentary
Position
Center
Position
3
1
5 4
ON
6
2
3
1
5 4
OFF
6
2
Keyway
Momentary
Position
3
17
1
6
5 4
ON
2
3
1
5 4
ON
6
SPDT
SPDT
UL/CSA
RATING
L192
L191
4PDT
OPERATING
ACTION**
18
1NT1-7E
1NT20-7E
1
2
3
1
2
3
1
2
3
6
5
4
6
5
4
6
5
4
9
8
7
9
8
7
9
8
7
18
12 11 10 12 11 10 12 11 10
ON
OFF
ON
ELECTRICAL
RATING
E
UL/CSA
RATING
L191
CAT. LISTING
4NT1-1A
**Operating action 9 to 18
152
Opposite
Keyway
Position
Center
Position
CAT. LISTING
4 pole, screw terminals
CIRCUITRY
1
5 4
OFF
6
2
3
5 4
ON
4 Pole, Double Throw
Keyway
Position
ELECTRICAL
RATING
B
B
3
4NT1-1
Locking lever
1 pole, screw terminals
OPERATING
ACTION**
11
11
2
CAT. LISTING
4PDT
CIRCUITRY
Opposite
Keyway
Position
Center
Position
www.honeywell.com/sensing
MANUAL SWITCHES
NT Series, Flat base switches
NT Series, Flat base,
2 position switches
Standard lever
1 pole, Quick Connect terminals
CIRCUITRY
SPST
SPST
SPDT
OPERATING
ACTION
1
2
3
ELECTRICAL
RATING
A
B
A
UL/CSA
RATING
L191
L192
L191
CAT. LISTING
UL/CSA
RATING
L191
L191
CAT. LISTING
UL/CSA
RATING
L191
CAT. LISTING
31NT91-2
31NT91-6
31NT91-3
2 pole, Quick Connect terminals
CIRCUITRY
DPST
DPDT
OPERATING
ACTION
4
5
ELECTRICAL
RATING
C
C
32NT91-2
32NT91-3
Locking lever
1 pole, Quick Connect terminals
CIRCUITRY
DPDT
OPERATING
ACTION
5
ELECTRICAL
RATING
C
32NT291-3G
2 Position Switching options/Operating action:
SPST
Single Pole, Single Throw
Keyway
Position
Opposite
Keyway
Position
2
3
OFF
2 3
ON
1
Keyway
Momentary
Position
Opposite
Keyway
Position
1 2
ON
1
2
OFF
2
SPDT
Single Pole, Double Throw
Keyway
Position
Opposite
Keyway
Position
1
1
3
2 3
ON
2 3
ON
DPST
Double Pole, Single Throw
Opposite
Keyway
Position
Keyway
Position
2
4
6
3
5
OFF
2
6
3
5
ON
DPDT
Double Pole, Double Throw
Opposite
Keyway
Position
Keyway
Position
5
1
6
www.honeywell.com/sensing
2
3
1
5 4
ON
6
2
3
5 4
ON
153
MANUAL SWITCHES
NT Series, Flat base,
3 position switches
Standard lever
1 pole, Quick Connect terminals
CIRCUITRY
OPERATING
ACTION
6
7
SPDT
SPDT
ELECTRICAL
RATING
A
B
UL/CSA
RATING
L191
L192
CAT. LISTING
UL/CSA
RATING
L191
L192
L192
CAT. LISTING
UL/CSA
RATING
L192
L192
CAT. LISTING
31NT91-1
31NT91-7
2 pole, Quick Connect terminals
CIRCUITRY
OPERATING
ACTION
8
10
10
DPDT
DPDT
DPDT
No hardware
ELECTRICAL
RATING
C
D
D
32NT91-1
32NT91-7
32NT91-7-NH
Locking lever
2 pole, Quick Connect terminals
CIRCUITRY
OPERATING
ACTION
11
9
DPDT
DPDT
ELECTRICAL
RATING
D
D
32NT291-5E
32NT94-70L
3 Position Switching options/Operating action:
SPDT
Single Pole, Double Throw
Keyway
Position
Center
Position
Opposite
Keyway
Position
1
1
1
6
2 3
ON
2 3
OFF
2 3
ON
Keyway
Momentary Center
Position
Position
Opposite
Keyway
Momentary
Position
1
1
7
2 3
ON
1
2 3
OFF
DPDT
Double Pole, Double Throw
Keyway
Position
1
8
6
2
1
3
1
5 4
ON
6
6
154
2
Opposite
Keyway
Position
Center
Position
Keyway
Momentary
Position
10
2 3
ON
2
3
1
5 4
OFF
6
1
5 4
ON
6
2
3
9
5 4
ON
Opposite
Keyway
Momentary
Position
Center
Position
3
2
Keyway
Momentary
Position
3
1
5 4
OFF
6
2
3
5 4
ON
Opposite
Keyway
Momentary
Position
3
2
1
3
2
1
3
2
1
6
5
ON
4
6
5
ON
4
6
5
ON
4
Keyway
Momentary
Position
11
Center
Maintained
Position
1
6
2
Opposite
Keyway
Position
Center
Position
3
1
5 4
ON
6
2
3
1
5 4
OFF
6
2
3
5 4
ON
www.honeywell.com/sensing
MANUAL SWITCHES
TS Series
Toggle Switches
TS Series switches may be used in applications where manual operation
is desired. Special on-on-on circuitry can also be furnished. They have
2- or 3-position, momentary and maintained action switches with 1- and
2-pole circuitry. Switches have solder, screw or quick-connect
terminations.
Approvals:
Operating temperature:
UL, CSA
-54 °C to 71 °C
[-65 °F to 160 °F]
Bushing 15/32 in
Bright nickel
Solder, Screw, Quick Connect
Silver tin oxide and indium oxide
Mounting:
Lever/bushing material:
Termination:
Contacts:
Electrical ratings* (Resistive load):
0.4 A to 10 A at 126 Vac to 277 Vac|
0.4 A to 20 A at 0.5 Vac to 125 Vac
* Values are based on previous Honeywell testing and opinion.
UL/CSA Rating Code:
L311:
10 A 277 Vac, 20 A 125 Vac; 3/4 Hp-125, 250 Vac
L312:
10 A 277 Vac, 20 A 125 Vac; 11/2 Hp-125, 250 Vac
11TS
One pole
12TS
Two pole
Panel cutout
Without locking ring
www.honeywell.com/sensing
With locking ring
155
MANUAL SWITCHES
TS Series
2 position switches
TS Series
3 position switches
Standard lever
Screw terminals
Standard lever
Screw terminals
CIRCUITRY
OPERATING
ACTION
1
2
4
5
SPST
SPST
DPST
DPDT
UL/CSA
RATING
L311
L311
L312
L312
CAT. LISTING
CIRCUITRY
OPERATING
SPDT
SPDT
DPDT
6
7
8
LISTING
11TS15-2
11TS15-6
12TS15-2
12TS15-3
UL/CSA
ACTION
L311
L311
L312
CAT.
RATING
11TS15-1
11TS15-7
12TS15-7
UL/CSA
ACTION
L311
L312
CAT.
RATING
11TS95-7
12TS95-10
Quick Connect terminals
Quick Connect terminals
CIRCUITRY
OPERATING
ACTION
1
5
SPST
DPDT
UL/CSA
RATING
L311
L312
CAT. LISTING
LISTING
11TS95-2
12TS95-3
Furnished unassembled
CIRCUITRY
OPERATING
SPDT
DPDT
7
9
3 Position Switching options/Operating action:
Solder terminals
SPDT
CIRCUITRY
OPERATING
ACTION
3
5
SPDT
DPDT
Furnished unassembled
UL/CSA
RATING
L311
L312
Single Pole, Double Throw
CAT. LISTING
11TS115-3
12TS115-3
Keyway
Position
Center
Position
Opposite
Keyway
Position
1
1
1
6
Keyway
Momentary Center
Position
Position
Opposite
Keyway
Momentary
Position
1
1
7
2 3
ON
2 3
OFF
2 3
ON
2 Position Switching options/Operating action:
SPST
Single Pole, Single Throw
Opposite
Keyway
Position
Keyway
Position
1
Keyway
Momentary
Position
Opposite
Keyway
Position
1 2
ON
1
2
OFF
DPDT
2 3
ON
8
1
6
SPDT
Single Pole, Double Throw
Keyway
Position
Opposite
Keyway
Position
1
1
2
DPST
3
1
5 4
ON
6
2
3
1
5 4
OFF
6
2
4
6
Opposite
Keyway
Position
3
5
OFF
2
6
DPDT
3
5
ON
Double Pole, Double Throw
Opposite
Keyway
Position
Keyway
Position
5
1
6
156
2 3
ON
Double Pole, Single Throw
Keyway
Position
2
3
1
5 4
ON
6
2
Opposite
Keyway
Momentary
Position
Center
Position
3
2 3
ON
1
2 3
OFF
2 3
ON
Double Pole, Double Throw
Keyway
Momentary
Position
2
2
3
OFF
2 3
ON
3
5 4
ON
www.honeywell.com/sensing
2
3
5 4
ON
Keyway
Maintained
Position
9
Center
Maintained
Position
Opposite
Keyway
Maintained
Position
3
2
1
3
2
1
3
2
1
6
5
ON
4
6
5
ON
4
6
5
ON
4
MANUAL SWITCHES
TP Series
Rocker Switches
Approvals:
Operating temperature:
Mounting:
Termination:
Contacts:
Honeywell’s 2 and 3 position, pushbutton action rocker switches are
dust and splash-proof sealed. They can be provided with or without
buttons. The switches are available as flush or panel mount, a large
selection of rocker colors, circuitries and electrical terminations. Versions
are available with silver or gold contacts to meet a variety of electrical
load requirements. For options other than those shown below, contact
Honeywell for more information.
UL, CSA, CE
-54 °C to 71 °C
[-65 °F to 160 °F]
Above Panel and Flush Panel
Screw
Silver cadmium oxide
Electrical ratings (Resistive load):
Values below are based on previous Honeywell testing and opinion.
A
0.5 A to 18 A at 0.5 Vdc to 28 Vdc|0.5 A to 10 A at 0.5 Vac to 277 Vac|
0.75 A at 115 Vdc|0.5 A at 250 Vdc
B
0.5 A to 20 A at 0.5 Vdc to 28 Vdc|0.75 A at 115 Vdc|
0.5 A at 250 Vdc|0.5 A to 15 A at 0.5 Vac to 277 Vac
C
0.5 A to 10 A at 0.5 Vac to 277 Vac|0.75 A at 115 Vdc|
0.5 A at 250 Vdc|0.5 A to 15 A at 0.5 Vdc to 28 Vdc
Switching options/Operating action:
2 Position Switches
SPST
Single Pole, Single Throw
Opposite
Identification Identification
Lug
Lug
Position
Position
1
2
2
3
OFF
2 3
ON
Identification Opposite
Identification
Lug
Lug
Momentary
Position
Position
1 2
ON
1
2
OFF
SPDT
Single Pole, Double Throw
Opposite
Identification Identification
Lug
Lug
Position
Position
UL/CSA Rating Code:
L191:
15 A-125, 250, 277 Vac; 1/2 Hp-125 Vac;
1 Hp-250, 277 Vac; 5 A-120 Vac “L”
3
1
L192:
10 A-125, 250, 277 Vac; 1/4 Hp-125 Vac;
1/2 Hp-250, 277 Vac; 3 A-125 Vac “L”
1
2 3
ON
DPDT
Double Pole, Double Throw
Opposite
Identification Identification
Lug
Lug
Position
Position
Application Note:
Honeywell does not recommend the use of silver cadmium oxide switch
contacts in non-arcing loads. Non-arcing loads are generally loads less than
12 V and/or 0.5 A. TP switches use silver cadmium oxide contacts, but gold
contact options are available.
2 3
ON
4
1
6
If you have specific questions, contact Honeywell.
2
3
1
5 4
ON
6
2
Identification Opposite
Identification
Lug
Lug
Momentary
Position
Position
3
1
5
6
5 4
ON
3 Position Switches
SPDT
6
2
3
1
5 4
ON
6
2
3
5 4
ON
Single Pole, Double Throw
Identification
Lug
Momentary
Position
1
2 3
ON
Center
Position
1
2 3
OFF
DPDT
Opposite
Identification
Lug
Momentary
Position
1
2 3
ON
Double Pole, Double Throw
Identification
Lug
Momentary
Position
7
1
6
www.honeywell.com/sensing
2
Center
Position
3
1
5 4
ON
6
2
Opposite
Identification
Lug
Momentary
Position
3
1
5 4
OFF
6
2
3
5 4
ON
157
MANUAL SWITCHES
Above panel mounting
Flush panel mounting
Panel cutout
Terminals
Single pole
Double pole
2 Position
3 Position
Flush Panel Mount
Flush Panel Mount
BUTTON
CIRCUITRY
Translucent
No
No
SPST
SPST
SPDT
OPERATING
ACTION
2
1
3
ELECTRICAL
RATING
C
B
B
UL/CSA
RATING
L192
L191
L191
OPERATING
ACTION
5
4
ELECTRICAL
RATING
A
B
UL/CSA
RATING
L192
L191
CAT. LISTING
BUTTON
CIRCUITRY
1TP1-6
1TP8-2
1TP8-3
Transparent
Translucent
No
Transparent
Translucent
SPDT
SPDT
SPDT
DPDT
DPDT
OPERATING
ACTION
6
6
6
7
7
ELECTRICAL
RATING
C
C
C
A
A
UL/CSA
RATING
L192
L192
L192
L192
L192
OPERATING
ACTION
7
ELECTRICAL
RATING
A
UL/CSA
RATING
L192
CAT. LISTING
1TP12-7
1TP201-7
1TP8-7
2TP12-7
2TP1-7
Above Panel Mount
BUTTON
CIRCUITRY
Translucent
No
DPDT
DPDT
CAT. LISTING
2TP216-8
2TP7-3
Above Panel Mount
BUTTON
CIRCUITRY
Translucent
DPDT
Button Options
Buttons are removable and interchangeable.
They measure 22,1 mm x 37,1 mm [0.87 in x 1.46 in].
COLOUR
Translucent
Transparent
White*
Yellow*
Black*
Green*
Red*
Blue*
CAT. LISTING
12PA6
12PA4
12PA5-W
12PA5-Y
12PA5-BK
12PA5-G
12PA5-R
12PA5-BL
* Opaque
158
www.honeywell.com/sensing
CAT. LISTING
2TP216-7
MANUAL SWITCHES
FR Series
Sealed Rocker Switches
OPTIONS
FRN SERIES
The FR Series illuminated and non-illluminated full-size sealed rocker
switches offer enhanced design flexibility and set new standards for both
performance and reliability. The switches are designed to fit industry
standard mounting holes of 44,0 mm x 22,0 mm [1.734 in x 0.867 in]
and offer a variety of switch and lamp circuit combinations.
Approvals:
UL, CSA
Mechanical life:
250,000 cycles minimum
Electrical life:
50,000 cycles (mom.); 100,000 cycles (maint.)
Sealing:
IP 67
Operating temperature:
-40 °C to 85 °C [-40 °F to 185 °F]
Termination style:
6,35 mm x 0,81 mm [0.25 in x 0.032 in]
quick connect tabs
One pole
CIRCUITRY (POS. 3, 2, 1)
Off, None, On
Off, None, On (Mom.)
Off (Mom.), None, On
On, None, On
On (Mom.), None, On
On, Off, On
On (Mom.), Off, On
On (Mom.), Off, On (Mom.)
BEZEL/ACTUATOR COLOR
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
CAT. LISTING
FRN91-12BB
FRN91-16BB
FRN91-14BB
FRN91-13BB
FRN91-18BB
FRN91-11BB
FRN91-15BB
FRN91-17BB
BEZEL/ACTUATOR COLOR
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
CAT. LISTING
FRN91-22BB
FRN91-26BB
FRN91-24BB
FRN91-23BB
FRN91-28BB
FRN91-21BB
FRN91-25BB
FRN91-27BB
Two poles
CIRCUITRY (POS. 3, 2, 1)
Off, None, On
Off, None, On (Mom.)
Off (Mom.), None, On
On, None, On
On (Mom.), None, On
On, Off, On
On (Mom.), Off, On
On (Mom.), Off, On (Mom.)
www.honeywell.com/sensing
159
MANUAL SWITCHES
OPTIONS
FRL SERIES
Accessories
DESCRIPTION
Rocker Boot
Two poles, Illumination Style C, 12 V
CIRCUITRY (POS. 3, 2, 1)
Off, None, On
On, None, On
On, Off, On
On (Mom.), Off, On (Mom.)
160
LAMP/LAMP
Green/Amber
Green/Green
Green/Green
Green/Green
LENS/LENS
CAT. LISTING
Large white trans./White bar
FRL91-22CGA3-BB79
Large white trans./White bar
FRL91-23CGG3-BB79
Large white trans./Large white trans. FRL91-21CGG3-BB77
Large white trans./Large white trans. FRL91-27CGG3-BB77
www.honeywell.com/sensing
CAT. LISTING
FR-01
MANUAL SWITCHES
SR Series
Sealed Rocker Switches
OPTIONS
SRN SERIES
The SR Series illuminated and non-illluminated full-size sealed rocker
switches offer enhanced performance in a flexible package. The switches
are available in single or souble pole configurations, have an optional
panel seal, and the SRL Series can be illuminated with square or barshaped lenses.
Approvals:
UL, CSA
Mechanical life:
150,000 cycles minimum
Electrical life:
50,000 cycles (mom.); 100,000 cycles (maint.)
Sealing:
Dual switch seal certified to IP66/IP68
Operating temperature:
-40 °C to 85 °C [-40 °F to 185 °F]
Termination style:
Offered in both 8 and 10 terminal base options.
AMP and Packard compatible connectors available.
One pole
CIRCUITRY (POS. 3, 2, 1)
Off, None, On
Off, None, On (Mom.)
Off (Mom.), None, On
On, None, On
On (Mom.), None, On
On, Off, On
On (Mom.), Off, On
On (Mom.), Off, On (Mom.)
BEZEL/ACTUATOR COLOR
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
CAT. LISTING
SRN91-12BB
SRN91-16BB
SRN91-14BB
SRN91-13BB
SRN91-18BB
SRN91-11BB
SRN91-15BB
SRN91-17BB
BEZEL/ACTUATOR COLOR
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
CAT. LISTING
SRN91-22BB
SRN91-26BB
SRN91-24BB
SRN91-23BB
SRN91-28BB
SRN91-21BB
SRN91-25BB
SRN91-27BB
Two poles
CIRCUITRY (POS. 3, 2, 1)
Off, None, On
Off, None, On (Mom.)
Off (Mom.), None, On
On, None, On
On (Mom.), None, On
On, Off, On
On (Mom.), Off, On
On (Mom.), Off, On (Mom.)
www.honeywell.com/sensing
161
MANUAL SWITCHES
OPTIONS
SRL SERIES
Accessories
DESCRIPTION
Connector Housing
CAT. LISTING
HRSR-01
DESCRIPTION
Connector Housing
CAT. LISTING
SR-01
Two poles, Illumination Style A, 12 V
CIRCUITRY (POS. 3, 2, 1)
Off, None, On
LAMP/LAMP
Red/None
CAT. LISTING
SRL91-22ARN3-BB9N
Two poles, Illumination Style U, 12 V
CIRCUITRY (POS. 3, 2, 1)
On, None, On
On, Off, On
On (Mom.), Off, On (Mom.)
Off, None, On
On, None, On
On, Off, On
Off, None, On
162
LAMP/LAMP
Red/Red
Red/Red
Red/Red
Green/Amber
Green/Green
Green/Green
Green/Green
LED VOLTAGE
12 V
12 V
12 V
12 V
12 V
12 V
12 V
CAT. LISTING
SRL91-23URR3-BB99
SRL91-21URR3-BB99
SRL91-27URR3-BB99
SRL91-22UGA3-BB99
SRL91-23UGG3-BB99
SRL91-21UGG3-BB99
SRL91-22UGG3-BB99
www.honeywell.com/sensing
MANUAL SWITCHES
MR Series
Miniature Rocker Switches
OPTIONS
MR SERIES
These miniature rocker switches offer a variety of aesthetic and
functional options ranging from circuit configurations to ac and dc
ratings. They feature industry standard dimensions, an easy snap-in
mounting method, and offer one-or-two pole switches in numerous
single-throw and double-throw maintained and momentary circuits. The
illuminated and non-illuminated miniature switches are intended to meet
the needs of a wide variety of industries and potential applications. The
silver-alloy contacts will handle a range of electrical loads. The
illuminated products offer LED or neon-style lamps.
Approvals:
Mechanical life:
Electrical life:
Dielectric strength UL/CSA:
Operating temperature:
Termination style:
UL, CSA
100,000 cycles minimum
50,000 cycles
1000 V
0 °C to 85 °C [32 °F to 185 °F]
4,75 mm x 0,81 mm tab QC
[0.187 in x 0.032 in] tab QC
Non-Illuminated
POLES
1
2
CIRCUITRY
N
N
CAT. LISTING
MR93-12BBN
MR93-22BBN
Illuminated, Single Pole
* Electrical Ratings (UL/CSA)
N
8 A, 125 Vac; 12 A, 125 Vac, ½ HP, 125 Vac - 250 Vac; UL, CSA
1
N/A
2
12 A, 6 V
3
12 A, 12 V
4
12 A, 24 V
A
12 A, 6 V
C
12 A, 12 V
E
12 A, 18 V
H
12 A, 24 V
J
12 A, 125 Vac; UL, CSA
K
8 A, 250 Vac; UL, CSA
LAMP
12 V LED
12 V LED
125 V Neon
250 V Neon
CIRCUITRY*
3
3
J
K
ACTUATOR COLOR
Clear Red
Clear Green
Clear Red
Clear Amber
CAT. LISTING
MR93-122B3
MR93-124B3
MR93-122BJ
MR93-121BK
ACTUATOR COLOR
Clear Red
Clear Green
Clear Amber
CAT. LISTING
MR93-222B3
MR93-224B3
MR93-221B4
Illuminated, Double Pole
LAMP
12 V LED
12 V LED
24 V Neon
CIRCUITRY*
3
3
4
www.honeywell.com/sensing
163
MANUAL SWITCHES
MRS Series
Miniature Rocker Switches
These subminiature rocker switches offer a variety of aesthetic and
functional options ranging from circuit configurations to ac and dc
ratings. They feature industry standard dimensions, an easy snap-in
mounting method, and offer one-or-two pole switches in numerous
single-throw and double-throw maintained and momentary circuits.
These non-illuminated switches are often ideal for applications where
there is restricted space behind the panel. It fits in a standard
rectangular cutout and is designed to fit easily and securely. The snapaction contacts provide the user with a crisp, positive response. A
variety of circuitry choices will appeal to many industry segments.
Approvals:
UL, CSA
Mechanical life:
100,000 cycles minimum
Electrical life:
50,000 cycles (mom.); 100,000 cycles (maint.)
Dielectric strength UL/CSA:
1000 V
Operating temperature:
0 °C to 85 °C [32 °F to 185 °F]
Termination style:
4,75 mm x 0,81 mm tab QC
[0.187 in x 0.032 in] tab QC
OPTIONS
MRS SERIES
One pole
CIRCUITRY (POS. 3, 2, 1)
Off, None, On
Off, None, On (Mom.)
Off (Mom.), None, On
On, None, On
On (Mom.), None, On
On, Off, On
On (Mom.), Off, On
On (Mom.), Off, On (Mom.)
BEZEL/ACTUATOR COLOR
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
Black/Black
ELEC. RATING*
1
3
3
1
3
2
2
2
CAT. LISTING
MRS93-12BB
MRS93-16BB
MRS93-14BB
MRS93-13BB
MRS93-18BB
MRS93-11BB
MRS93-15BB
MRS93-17BB
* Electrical Ratings (UL/CSA)
164
1
10 A, 125 Vac; 10 A, 250 Vac; ¼ HP, 125 Vac - 250 Vac
2
8 A, 125 Vac - 250 Vac; ¼ HP, 125 Vac - 250 Vac
3
12 A, 125 Vac; 6 A, 250 Vac; ¼ HP, 125 Vac - 250 Vac
www.honeywell.com/sensing
MANUAL SWITCHES AND PUSHBUTTONS
Manual Switches and
Pushbuttons
Manual Switches. Designed by industrial designers to achieve balance
between harmonious appearance and ergonomics, AML Advanced
Manual Line has pushbuttons, paddles, and rockers; with LED,
incandescent, and neon illumination. Plus, matching indicators and LED
annunciators. A smaller cousin, MML Minature Manual Line, offers many
AML features in a space-saving size.
Pushbuttons. A wide array of different pushbutton families, many with
lighted display and matching indicators. Includes Series 2, an easily
assembled modular design with many color display/control options; and
compact PB unlighted pushbuttons.
www.honeywell.com/sensing
165
MANUAL SWITCHES AND PUSHBUTTONS
Panel Area
20,5 mm [0.80 in] square
and 20,5 mm x 30 mm
[0.80 in x 1.20 in]
PWB mount: 10,2 mm [0.40 in] square
and 15,2 mm x 10,2 mm [0.60 in x
0.40 in], except 2-pole power duty
paddles and rockers
21,3 x mm x 26,2 mm
[0.84 in x 1.03 in]
Display
15,0 mm [0.59 in] square and
15,0 mm x 25,0 mm [0.59 in x
0.99 in] buttons
Pushbuttons: 6,6 mm [0.26 in] square
and 11,7 mm x 6,6 mm [0.46 in x
0.26 in]. Transmitted color
13,5 mm x 18.0 mm [0.53 in x
0.71 in] buttons
Pushbutton or lens cap (indicator only) buttons with up to
3-section display. Various button
heights. Transmitted, projected,
and dead front hidden legend/color
Rockers: Optional lenses for
transmitted color
Illumination
Incandescent T-1-3/4 lamps –
6 V, 14 V, and 28 V
LEDs - 2 V, 4 V, 5 V, 10 V, 15 V
Neon lamps – 125 V, 250 V
LEDs - 1.7 V, 2.1 V, 2.2 V, 2.3 V
Incandescent T-1 lamps – 5 V
(other voltages available)
Incandescent T-3-1/4 lamps
14 V, 28 V
Behind Panel
Depth (max.)
43,1 mm [1.7 in]
17,0 mm [0.67 in]
6,1 mm [2.4 in]
Mounting
Snap-in individual, strip, matrix,
sub-panel, P.C. board mounting
Printed wiring board, snap-in strip,
matrix
Snap-in individual or strip
mounting; top panel or
sub-panel mounting
Termination
Solder, quick-connect,
P.C. board, push-on
Printed wiring board, solder,
quick-connect
Solder, quick-connect,
P.C. board
Sealing
Optional panel seal
–
–
Special
Features
Along with companion rockers and
paddles, provides the most
advanced and complete line of
manual controls available
–
Can be furnished with locked
button feature for use in public
areas where tampering is a
problem
Single section display
Transmitted, projected, and
dead front hidden color
Solid State:
5, 6 - 16, or
4.5 - 24 Vdc
Electronic
control: Up
to 3 A,
125 Vac
Power Duty:
up to 10 A,
125/250
Vac
Solid State:
5 Vdc to 24 Vdc
Electronic
Control: Up
to 1 A,
125 Vac res.
Power Duty
Pushbuttons:
up to 6 A,
250 Vac
res.
Circuitry
Current
sinking
1, 2, and 4
Form C
2 pole,
Form X
Current
sinking
1 or 2
Form C
1 or 2
Form X
Agency
Listings
UL, CSA, CDE and CE (selected
products)*
Electrical Data
UL and CSA
* For complete international compliance information, contact the 800 number.
166
Series 4
MML
AML
www.honeywell.com/sensing
up to 10 A
1 or 2 Form C
UL, CSA
MANUAL SWITCHES AND PUSHBUTTONS
AML
PB
Series 2
25,4 mm x 35,8 mm [1.0 in x 1.41 in]
21,8 mm x 34,3 mm [0.86 in x
1.35 in]
Depends on type and number of
basic switches
20,5 x mm x 30,5 mm
[0.80 in x 1.20 in]
21,6 mm x 27,4 mm [0.85 in x
1.08 in] buttons.
8,1 mm [0.32 in] dia., and other
button sizes
Paddle:
Full and split
color covers
1-4 section display
Transmitted and projected color
Colored buttons
Incandescent T-1-3/4 lamps,
28 V
–
–
83,3 mm [3.28 in]
–
–
Snap-in flange mount and units with
mounting barriers for individual
or strip mount
Threaded bushing
Snap-in individual, strip,
matrix, sub-panel, P.C.
board mounting
Solder, quick-connect,
and screw terminals
Solder terminals
Solder, quick-connect,
P.C. board, push on
–
Panel seal version. Hermetically sealed units
–
Compact size
1 A to 20 A, 125 Vac, 250 Vac,
480 Vac, depending on switch
module specified
2 A to 5 A, 125/250 Vac
Solid state:
5, 6 -16, or
4.5 - 24 Vdc
1 - 4 Form C
1 - 4 Form C
Current sinking 1, 2, & 4 Form C,
2 or 3 positions, 2 or 3 positions,
mom. or maint.
mom. or maint.
UL, CSA
UL, CSA. Some meet MIL-S-8805 and
MIL-STD-1080D
www.honeywell.com/sensing
Rocker:
Full and split
color rockers
–
Matches display/control options
of AML pushbuttons
Electronic
Control: Up
to 3 A,
125 Vac
Power Duty
Pushbuttons:
up to 15 A,
125/250 Vac
1 or 2 Form A
2 pos.
maint.
UL, CSA, VDC, and CE (selected
products)*
167
MANUAL SWITCHES AND PUSHBUTTONS
AML Series
Advanced Manual Line
Switches
Power-duty switches meet line disconnect application needs with 10-amp
pushbuttons and 15-amp paddle and rocker switches.
Easy to Wire. All AML devices present single-level termination. This
means faster, easier, neater, and more economical wiring. And there is a
choice of solder, quick-connect, push-on, and printed circuit
termination.
Mating Terminals
The .110 x .020 quick-connect/solder terminals (types 2 and 8) are
designed for use with receptacles that comply with the UL standard for
insertion and withdrawal forces. Maximum insertion force is 12 lbs.
max., withdrawal force is 14 lbs. These receptacles are supplied by AMP
Inc., Berg, Augat, Hollingsworth, MALCO, Zierick, and others. Refer to
Thomas Register or the Yellow Pages for the location of your supplier.
Features
• Complete selection of pushbutton, rocker, and paddle (toggle type)
switches accommodates different functions and helps promote
operator efficiency.
In Front of the Panel
Coordinated, attractive appearance. AML features innovations
designed by industrial designers aimed at achieving the best balance of
human factors and aesthetic appearance. Operator height, bezel size,
and the compatability of square and rectangular shapes blend with
other components to harmonize your panel. There’s no visual clutter to
distract from man/machine communication.
This comprehensive line of lighted and unlighted manual controls
features:
• Solid state, electronic, and power duty control.
• Full or split-screen incandescent display switches and indicators
provide vivid transmitted color, projected color (for neutral display
when unlit), and dead front (hidden color).
• Wide-angle visibility LED and line voltage neon display switches and
indicators.
• Annunciators back lighted by LEDs enable high density message
display.
• Pushbuttons for high and intermediate frequency functions.
• Keylock switches available for controlled access applications.
• Rocker and paddle switches, with two or three positions, for less
frequent control functions.
• All AML terminations at the same shallow depth (43,1 mm [1.7 in])
for convenient wiring or PC board termination.
• Plus lighted indicators and annunciators which complement AML’s
universal appeal.
• Snap-in surface mount or sub-panel (hidden bezel) mount with
mounting hardware.
Various controls can be matched with their functions to accommodate
the most natural and efficient habit pattern relfex. Keylock-operated
switches can be used to assure “authorized personnel only” access.
• Pad-printed legends with a clear polyurethane overcoat available in a
choice of five standard sizes.
Display flexibility. AML offers a choice of five legend sizes, four button
heights, full or split second display, and illunimation by incandescent
lamps, LEDs or neons. Colors are bright and uniform, providing a
strong definition and good visibility. (Non-illuminated devices have the
same attractive colors.)
• UL recognized, CSA certification.
Color display options include:
• Transmitted color – color can be distinguished whether the lamp is
On or Off.
• Dead front – display appears black, until illumination causes legend
and color to appear.
• Projected color – white display is diffused with color when
illuminated.
Behind the Panel
AMLs simple, cost-effective design provides many behind-panel benefits
for the designer and installer/user.
Simple to install. They snap in from the panel front individually or in
vertical or horizontal strips; or in subpanel mounted strips and matrices
that can be pre-assembled and pre-wired.
Electrical flexibility. Solid state switches with Hall-effect integrated
circuits interface directly with microprocessors and other logic-level
devices. These ICs were first applied in MICRO SWITCH solid state
keyboards. Today, many MICRO SWITCH products incorporate the Halleffect technology to meet a wide range of position sensing and manual
control needs.
Electronic control switches with gold or silver contacts, and 1, 2, or 4
poles, will handle up to three amps. Including an encoded version which
generates different binary coded outputs merely by changing cam-keyed
buttons.
168
• Metric design for worldwide acceptance.
• Selected listings are certifed by VDE and CE. (For compliance status,
contact the 800 number).
Honeywell’s AML Advanced Manual Line combines functional flexibility
with electrical versatility to provide a broad range of options to choose
from.
Easy to Relamp. Relamping of T-1-3/4 incandescent AML91 lamps is
accomplished from the front of the panel without tools. (AML92 T-1-3/4
LEDs can be added in the same manner.
Full Guard Bezel Option. As an alternative to standard height bezels
(1,5 mm [0.6 in]), pushbutton switches can be furnished with full-guard
bezels extending 5,0 mm [0.19 in] from the mounting surface. In the
free position, standard buttons are flush will full-guard bezels.
The raised bezel guards against accidental operation by someone leaning
against or dropping something on a control console.
High Intensity LEDs for Full-face AML Lighted Display
AML 92 Series
• Full-face illumination for high visitiblity lighted colors.
• Advanced illumination technology combines high-intensity LED in
standard T-1-3/4 wedge base lamp package.
• Easy plug-in installation in AML lighted switches and indicators.
• Low operating temperature permits high density, continuous
operation with minimal heat build up.
AML92 Series LEDs have a quad chip assembled in a T-1-3/4 wedge
base lamp package. They provide full-face illumination when used with
lighted pushbutton, rocker and paddle switches, or indicators equipped
with incandescent lamp sockets.
www.honeywell.com/sensing
MANUAL SWITCHES AND PUSHBUTTONS
AML Series, continued
AML10 Series
Approvals:
Electromechanical Life*
Pushbuttons - Momentary
Pushbuttons - Alternate
Rockers
Paddles
*95% survival
UL (E53576), CSA (LR4442)
1,000,000
25,000
25,000
25,000
AML10 Series Electrical Data
Absolute Maximum Rating 4
Electrical Characteristics
Output
Leakage
Current
max.
(Released)
Switching Time
Max.
Rise
Fall
10% to 90% to
90%
10%
Supply
Voltage
(V s )
Voltage
Externally
Applied to
Output
Integrated
Circuit
Function
Supply
Current
(max.)
Output
Voltage
(Operated)
Loads
to
Output
5 Vdc
Sinking 1
3.5 mA
(released)
6.5 mA
(operated no load)
+0.4 V
(sinking
8 mA)
2.0 µA
1.0 µs
(sinking
8 mA)
1.0 µs
(sinking
8 mA)
-0.5 Vdc to
7.0 Vdc
0 °C to 65 °C
[32 °F to 149 °F]
-0.5 V min.
15 V max.
(off condition)
20 mA
(sinking)
-40 °C to
65 °C
[-40 °F to
149 °F]
6 Vdc to 16 Vdc
Sinking 2
6.5 mA @
6 Vdc,
10.0 mA @
16 Vdc
(plus load
current) 3
+0.4 V
(sinking
20 mA
max.)
2.0 µA
1.5 µs
(sinking
20 mA)
0.5 µs
(sinking
20 mA)
-1.2 Vdc to
+20 Vdc
20 Vdc max. in
off condition only
-0.5 Vdc min. in
off or on
condition
40 mA
-40 °C to
65 °C
[-40 °F to
149 °F]
4.5 Vdc to 24 Vdc
Sinking
5V
7.0 mA
(released)
24 V
9.0 mA
(released)
14.0 mA
(operated no load)
+0.4 V
(sinking
10 mA)
10 µA
1.5 µs
(sinking
10 mA)
0.5 µs
(sinking
10 mA)
-30 Vdc to
+30 Vdc
-0.5 V min.
+24 V max.
(off condition)
20 mA
(sinking)
-40 °C to
65 °C
[-40 °F to
149 °F]
Storage
Temperature
1
Over temperature range of 0 °C to 55 °C [32 °F to 131 °F] and supply voltage of 4.5 Vdc to 5.5 Vdc.
Over temperature range of 0 °C to 55 °C [32 °F to 131 °F] and supply voltage of 16 Vdc.
3
At 24 °C [75 °F]
4
As with all solid state components, performance can be expected to deteriorate as rating limits are approached; however, they will not be damaged
unless the limits are exceeded.
2
Order Guide
SERIES NAME
AML10
CAT. LISTING
Custom
www.honeywell.com/sensing
169
MANUAL SWITCHES AND PUSHBUTTONS
AML Series, continued
AML20 Series
AML40 Series
Approvals:
Approvals:
Electromechanical Life*
UL (E12252), CSA (LR4442)
VDE (0630/10.78*), CE (Rating 1710 No. 4275.5788)
Electromechanical Life
Pushbuttons - Momentary
25,000 (silver); 100,000 (gold)
Pushbuttons - Alternate
25,000
Rockers
25,000
Paddles
25,000
*
Exception: Four-pole AMLs are not included in VDE approval.
Order Guide
SERIES NAME
AML40
AML 20 Series Electrical Data
Contacts
Voltage
Current
Load Type
Silver
or
gold-plated silver
250 Vac
125 Vac
24 Vdc
2A
3A
2A
75% Power Factor
75% Power Factor
Resistive
Gold
125 Vac/Vdc
100 mA
Resistive
Order Guide
SERIES NAME
AML20
CAT. LISTING
Custom
AML30 Series
Approvals:
UL (E12252), CSA (LR4442)
VDE (0630/10.78*), CE (Rating 1710 No. 4275.5788)
Electromechanical Life
Pushbuttons - Momentary
25,000
Pushbuttons - Alternate
25,000
Rockers
25,000
Paddles
25,000
*
Exception: Only the two-pole AML33 and AML34 are certified by VDE.
AML 30 Series Electrical Data
Voltage
Current
Pushbuttons
Current
Rockers or
Paddles
Load Type
125 Vac
10 A
15 A
60% Power Factor
250 Vac
10 A
15 A
60% Power Factor
Order Guide
SERIES NAME
AML30
170
UL (E58932), CSA (LR4442)
N/A
CAT. LISTING
Custom
www.honeywell.com/sensing
CAT. LISTING
Custom
MANUAL SWITCHES AND PUSHBUTTONS
MML Series
Miniature Manual Line
Switches
Lighted Display Options
Pushbuttons and indicators can be full-face illuminated by LEDs or
incandescent lamps for high visibility of colors and legends. Inherently
rugged, long-life LEDs can help reduce service and maintenance costs.
Also, their low drive and in-rush current (30 mA or less) redueces costs
of drive circuitry.
Rockers can be furnished with colored lenses for illumination by LEDs or
incandescent lamps.
Control Versatility
Solid state pushbutton switches with Hall-effect integrated circuits
interface directly with microprocessors and other logic-level devices.
Time-proven for billions of cycles, Hall-effect ICs provide the ultimate in
reliability.
Electronic control push button or rocker switches, with gold or silver
contacts, handle up to 1 A; power-duty switches, up to 6 A.
MML Enhances Panel Harmony
Features
• Breadth of line offers complete selection of pushbuttons, rockers,
and indicators to accommodate different functions and promote
operator efficiency.
• Printed wiring board (PWB) or panel-mounted switches, plus multiunit strip mounting, and single-level termination for cost-effective
installation.
The attractive, clean line design of the total MML offering is coordinated
to work in harmony and enhance the visual qualities of your product.
MML will help make a good first impression with your customers by
blending with other panel components, and also works hard over the
long run to maintain operator satisfaction.
• Tactile feedback imparts a definite feel of switching action.
How to Order
• Coordinated appearance enhances panel harmony.
To specify MML catalog listings, refer to the order guides. They are
based on a modular cataloging system which gives you the flexibility to
choose the combination of feature options that best answers the
requirements of your application.
• Illumination by long-life LEDs and incandescent lamps – for lighted
display versatility.
• Solid state, electronic control and power-duty switching – for
electrical versatility.
• Temperature range 18 °C to 65 °C [0 °F to 149 °F].
Design Freedom
Rocker switches are available in the MML Miniature Manual Line. They
complement AML pushbuttons and indicators, providing you flexibility
and design freedom to meet all your miniature manual control
requirements. You can choose the actuator option that matches the
switch function and natural-habit pattern reflex of the operator. You no
longer need to compromise quality, appearance, or human factors
considerations because of size constraints.
The MML pushbutton and indicator offering has been expanded to
include new square forms which are small enough to fit in the tightest
places.
Mounting Flexibility
Printed wiring board (PWB) mounted switches can be arranged in
individual panel openings or multi-unit strips, in a common panel cutout.
Optional support brackets provide added rigidity for stand-alone PWBmounted devices. Units with bezels and mounting clips can be snap-in
mounted from the front panel.
Single-level PWB or solder/quick-connect termination throughout makes
wiring faster, easier, and more economical. Housing are designed to
accommodate washing, before and after wave soldering, to help prevent
contamination during printed wiring board installation.
www.honeywell.com/sensing
171
MANUAL SWITCHES AND PUSHBUTTONS
MML20 Series Electrical Data
Electrical Rating (silver contacts)
MML10 Series
Approvals:
Mechanical Lifetime*
Pushbuttons – Momentary
Pushbuttons – Alternate
Rockers
Electrical Lifetime**
Pushbuttons – Momentary
Pushbuttons – Alternate
Rockers
UL (E53576), CSA (LR4442)
1,000,000
100,000
100,000
1,000,000
100,000
100,000
Standard buttons
Up to 1 A, 125 Vac
1-piece plunger/
lens cap buttons
black – up to 1 A, 125 Vac
All others – up to 0.5 A, 125 Vac
Electrical Rating (gold contacts)
All button styles
Up to 0.25 A, 30 Vdc
UL rating - 0.1 A, 30 Vdc
Contact arrangement
One pole Form C
* 95% survival
** Lifetime at full-rated load
MML10 Series Electrical Data
Order Guide
Electrical Characteristics
Integrated circuit function
5 Vdc to 24 Vdc sinking
Supply current (max)
7 mA (released)
8 mA (operated no load)
Output voltage (operated)
0.3 V (sinking 10 mA)
Output leakage current max.
(released)
5.0 µA
SERIES NAME
MML20
MML30 Series
Switching time (max).
Rise 10% to 90%
Fall 90% to 10%
15 µs (sinking 10 mA)
0.5 µs (sinking 10 mA)
Rated output current
10 mA sinking
Approvals:
Mechanical Lifetime*
Pushbuttons - Momentary
Pushbuttons - Alternate
Rockers
Electrical Lifetime**
Pushbuttons - Momentary
Pushbuttons - Alternate
Rockers
Absolute Maximum Ratings
Supply Voltage (Vs)
-28 Vdc to 28 Vdc
Voltage externally applied
to output
-0.5 V min.; 28 V max.
(off condition)
Loads to output
20 mA (sinking)
Storage temperature
-40 °C to 85 °C
[-40 °F to 185 °F]
Operating temperature
-18 °C to 65 °C
[0 °F to 149 °F] and supply
voltage of 4.5 Vdc to 5.5 Vdc
Electrical rating
Silver contacts
Contact arrangement
25,000
25,000
25,000
6 A @ 125 Vac, 250 Vac,
2 A @ 30 Vdc
1 A @ 125 Vdc “L”,
1/10 hp @ 125 Vac
1 or 2 poles Form X
Order Guide
UL (E12252), CSA (LR4442)
SERIES NAME
MML30
CAT. LISTING
Custom
250,000
100,000
250,000
25,000
25,000
25,000
MML40 Series
Approvals:
UL (E58932), CSA (LR4442)
Order Guide
SERIES NAME
MML40
172
100,000
100,000
100,000
MML30 Series Electrical Data
MML31
MML20 Series
* 95% survival
** Lifetime at full-rated load
UL (E12252), CSA (LR4442)
* 95% survival
** Lifetime at full-rated load
As with solid state components, performance can be expected to
deteriorate as rating limits are approached; however, they will not be
damaged unless the limits are exceeded.
Approvals:
Mechanical Lifetime*
Pushbuttons - Momentary
Pushbuttons - Alternate
Rockers
Electrical Lifetime**
Pushbuttons - Momentary
Pushbuttons - Alternate
Rockers
CAT. LISTING
Custom
www.honeywell.com/sensing
CAT. LISTING
Custom
CUSTOM SWITCHES AND ASSEMBLIES
Custom Switches
and Assemblies
Honeywell Sensing and Control’s broad product
and technology portfolio combined with our
industry experience and know-how offers
customers a wealth of choice:
Harness assemblies
•
Cable harness assemblies can be added to many of our
products, designed to specific customer requirements.
•
These may incorporate latest specification leadwire systems,
screens, connectors and backshells and aimed at providing
customers with a fully integrated solutions.
• Custom engineered solutions for customerspecific designs and product packaging
• Technology selection
• Integration and component miniaturisation
For more information contact your local
Honeywell sales representative.
Shown here are some examples of what we can
do.
Switch assemblies
•
Honeywell has many years of experience designing
custom solutions for customers.
•
Our environment and hermetically sealed products
may, for instance, be incorporated into housings that
provide minimum space envelope or specific
mounting arrangement.
•
They may incorporate precision actuating mechanisms and
electronic circuitry to interface with customer systems.
Rotary switches
•
Based on Honeywell basic or miniature hermetic switches,
rotary switches can be designed to incorporate multiple poles,
specific switch on/off sequences and high or low energy
switching.
•
Potential applications include weapons selectors, Re-fuelling
probe indicators and flap position indicators.
•
Customer-specific space envelope and mounting
arrangements can be accommodated.
Operator interface products
•
Honeywell has many examples of custom designed
operator interfaced products for both hand and foot
operation.
•
These products may incorporate pushbuttons,
indicators and electronic interfacing circuitry.
•
All products are capable of operating in these
most severe environments.
www.honeywell.com/sensing
173
CUSTOM SWITCHES AND ASSEMBLIES
Gear selectors
•
Based on rotary switches, this family of rugged and reliable gear selectors is used in
armoured vehicle applications.
•
These products can be modified to meet new
potential applications such as illuminated or
fluorescent gear position indications, number of
gear positions, interlocking, high or low energy
switching and mounting arrangements.
Flap selectors
•
A range of commercial aircraft flap selectors based on RVDT (Rotary
Variable Differential Transducers) or Honeywell basic switches.
•
These products can be modified to meet new potential
application requirements such as flap positions, mounting
arrangements, connectors or electrical harnesses.
•
The example illustrated incorporates four-position flap selection,
environmentally sealed fluorescent flap decal and illuminated position
indicators and is based on RVDTs.
Cargo loading systems
•
The door sill roller is part of the cargo loading system that serves as a guiding and protecting
element during load and unload operations. Incoming cargo is
guided into the cargo loading bay to protect the cargo door
sill.
•
The Y-guide is part of the cargo loading system that
controls the lateral guidance of cargo during load and
unload operations at the cargo entrance area. The unit is
designed as a powered, retractable and overrideable guide.
•
The angle measurement device is part of door actuator
symmetry monitoring. This device prevents damage to the main
cargo door and the structure of the aircraft by monitoring the
asymmetric movement of the two main cargo door actuators.
•
The example shown is a Y-guide cargo loading system incorporating robust mechanical
components and environmentally sealed position sensors. It is used in commercial aircraft
applications.
174
www.honeywell.com/sensing
VEHICLE CONTROLS
CUSTOM CONTROLS
Custom Controls
Multi-function controls
Competition between off-road equipment
manufacturers can be fierce. Honeywell can help
you distinguish yourself from the competition by
working with you in developing your custom
controls and switches. We have innovative and
flexible design capabilities coupled with costeffective prices. Quick response including design,
and “fit-up” prototypes in weeks versus months
from your initial request provides the edge you
need to shine over your competition. Control
interfaces that are functional, rugged and
aesthetically pleasing are an important part of the
design process. The ability to ergonomically
design numerous functions into one product is
our strength.
Throttle controls
Technological and process
capabilities
•
•
•
Pro/Engineer software
Programmable controllers
Electronic shifters
Mold flow analysis
Control and switch capability
•
•
•
•
•
•
•
•
Sliding, toggle and button engagement
Environmentally protected
Night visibility/lighted components
Key switches
Directional
Speed control
Molded terminal arrays
Ergonomically sensitive
Indicator light panels
Potential Applications
•
•
•
•
•
•
•
•
All terrain vehicles (ATVs)
Forestry
Indicator light strips
Agriculture
Lawn and garden
Snowmobiles
Motorcycles
Construction
Push/Pull switches
Material handling
Proportional retarders
www.honeywell.com/sensing
175
HOUR METERS
Hour meters
Honeywell has a wide range of hour meters that are used for recording and tracking
the total elapsed time that equipment is in use.
Long recognised as the industry leader, the Hobbs brand hour meters are designed
for use in a wide variety of potential applications and environments. In order to
protect investment in expensive equipment, our customers demand a meter that is
accurate and dependable. Down time is not an option - customers need to know
when it is time to service their equipment.
No matter whether the equipment is for production or recreation, manufacturers,
operators and service professionals rely on Honeywell for their hour meters needs.
176
www.honeywell.com/sensing
HOUR METERS
98000 Series
LCD hour meters
The 98000 Series LCD hour meter combines reliability with a solid state
package, built for rugged, heavy-duty applications. The meter utilizes a
large LCD display with 6 mm [0.24 in] high digits.
Other benefits include shorter overall meter depth, totally silent
operation, non-volatile memory and solid-state circuitry. A wide variety
of mounting styles are offered that are direct replacements for most
traditional hour meters. Optional offerings include, reset capability,
customised logos, 4.5 Vdc to 16 Vdc, and pulse counters. The series is
UL recognised and comes in a variety of mounting and case options.
Termination:
Sealing:
Approvals:
Operating temperature:
Voltage range:
6,35 mm [¼ in] blade
IP66 (Cased hour meters only)
UL
-40 °C to 85 °C [-40 °F to 185 °F]
9 Vdc to 64 Vdc
OPTIONS
2 Screw, deluxe bezel
Round, 2¼ in [57,15 mm], chrome, flush cup
mount
35,80 (1.41)
31,80
(1.25)
22,60
(0.89)
2,00
(0.08)
Ø
57,7
(2.27)
Ø
50,8
(2.00)
54,10 (2.13)
3,60
(0.14)
19,10
(0.75)
7,60
(0.30)
Ø 61,2 (2.41)
34,30
(1.35)
3,00
(0.12)
18,5
(0.73)
2 Screw Deluxe:
Panel cutout 36,83 x 24,13 (1.45 x 0.95) rectangular opening
2 x 3,81 (0.15) holes spaced 44,45 (1.750)
15,2
(0.60)
Ø 50,4 (1.985)
Flush Mount (Retainer) 57,77 (2.27):
Panel cutout 50,8 (2.00) Ø opening
NUMBER OF TERMINALS
2
3
4 with reset
CAT. LISTING
98313
98323
98303
NUMBER OF TERMINALS
2
3
4
CAT. LISTING
98314
98324
98304
Rectangular, retainer mount
Round, 2¼ in [57,15 mm], black, flush cup mount
27,40
(1.08)
40,60 (1.60)
Ø
57,7
(2.27)
2,50
(0.10)
Ø
50,8
(2.00)
19,10
(0.75)
34,30
(1.35)
7,60
(0.30)
Ø 61,2 (2.41)
18,5
(0.73)
Retainer Mount:
Panel cutout 36,83 x 24,13 (1.45 x 0.95) rectangular opening
NUMBER OF TERMINALS
2
3
4
3,00
(0.12)
15,2
(0.60)
CAT. LISTING
98311
98321
98301
Ø 50,4 (1.985)
Flush Mount (Retainer) 57,77 (2.27):
Panel cutout 50,8 (2.00) Ø opening
NUMBER OF TERMINALS
2
3
4
www.honeywell.com/sensing
CAT. LISTING
98312
98322
98302
177
HOUR METERS
98000 Series
LCD hour meter modules
98000 Series
LCD volt/hour meters
The LCD hour meter module is a custom engineered elapsed time meter
designed to be mounted directly onto a printed circuit board (PCB). It
can be used in a variety of dc applications that require an hour meter for
preventative maintenance, warranty verification, renting and leasing. LCD
counter also available.
Honeywell Sensing and Control has introduced the LCD volt/hour meter that
combines two important instruments in one rugged, sealed package.
Honeywell volt hour meters monitor the condition of battery electrical
systems and simultaneously measure the total elapsed run time of
equipment in which they are installed. During operation, the micro-controller
based movement will cycle the LCD display between voltage and hours
indication at a rate of fifteen seconds on for voltage and one second on for
total hours. The high-impact polycarbonate case is sealed against dust and
moisture. Available in various bezel and mounting configurations,
Honeywell’s volt/hour meters are the perfect choice for a variety of
applications.
Approvals:
Voltage range:
UL, CSA
9 Vdc to 64 Vdc
4.5 Vdc to 16 Vdc
A
B
Termination:
Sealing:
Operating temperature:
Voltage range:
6,35 mm [¼ in] blade
IP66
-40 °C to 85 °C [-40 °F to 185 °F]
7 Vdc to 19 Vdc
OPTIONS
Combination volt/hour meters
2 Screw, deluxe bezel
15,24 (0.60)
5,08 (0.20)
33,78 (1.33)
Mounting surface
26,03 (1.025)
5,90
(0.23)
Ø 0,76 ±0,05
(0.03 ±0.002)
NUMBER OF TERMINALS
4
4
4
VOLTAGE RANGE
A
B
A
31,80
(1.25)
22,60
(0.89)
14,00
(0.55)
20,57
(0.81)
7,62
(0.30)
Metal bezel
35,80 (1.41)
27,94 (1.10)
5,84 (0.23)
2,00
(0.08)
54,10 (2.13)
0,135
(3.43)
3,60
(0.14)
19,10
(0.75)
34,30
(1.35)
CAT. LISTING
98706
98707
98750
2 Screw Deluxe:
Panel cutout 36,83 x 24,13 (1.45 x 0.95) rectangular opening
2 x 3,81 (0.15) holes spaced 44,45 (1.750)
CAT. LISTING
98103
CAUTION
All meter modules have crucial components exposed. The module must be
sufficiently protected if used in an environment other than specified.
Contact Honeywell when suitability of application is questioned.
Rectangular, retainer mount
27,40
(1.08)
40,60 (1.60)
2,50
(0.10)
19,10
(0.75)
34,30
(1.35)
Retainer Mount:
Panel cutout 36,83 x 24,13 (1.45 x 0.95) rectangular opening
CAT. LISTING
98101
178
www.honeywell.com/sensing
HOUR METERS
98000 Series
LCD volt/hour meters (continued)
Volt meters
Combination volt/hour meters
Round, 2¼ in [57,15 mm], chrome, flush cup
mount
Ø
57,7
(2.27)
The volt meter incorporates the features and benefits of the LCD volt
hour meter but is used for volts only. The large easy to read LCD display
provides a digital readout of the vehicle voltage. Available in standard
Round, 2-Screw and Rectangular case configurations, volt meters
require only battery positive and ground leads for installation and
operation.
Ø
50,8
(2.00)
Termination:
Sealing:
Operating temperature:
Voltage range:
7,60
(0.30)
Ø 61,2 (2.41)
18,5
(0.73)
3,00
(0.12)
6,35 mm [¼ in] blade
IP66
-40 °C to 85 °C [-40 °F to 185 °F]
7 Vdc to 19 Vdc
2 Screw, deluxe bezel
CAT. LISTING
98108
15,2
(0.60)
Ø 50,4 (1.985)
Flush Mount (Retainer) 57,77 (2.27):
Panel cutout 50,8 (2.00) Ø opening
Rectangular, retainer mount
CAT. LISTING
98111
CAT. LISTING
98106
Round, 2¼ in [57,15 mm], black, flush cup mount
Round, 2¼ in [57,15 mm], chrome, flush cup
mount
Ø
57,7
(2.27)
CAT. LISTING
98110
Ø
50,8
(2.00)
Round, 2¼ in [57,15 mm], black, flush cup mount
7,60
(0.30)
Ø 61,2 (2.41)
18,5
(0.73)
3,00
(0.12)
CAT. LISTING
98109
15,2
(0.60)
Ø 50,4 (1.985)
Flush Mount (Retainer) 57,77 (2.27):
Panel cutout 50,8 (2.00) Ø opening
CAT. LISTING
98102
Maintenance Meter
CAT. LISTING
98202
www.honeywell.com/sensing
179
HOUR METERS
85000 Series
Quartz plus dc hour meters
The Quartz Plus Series of hour meters are aimed at providing
performance and reliability. Features include a highly reliable drive
mechanism and odometer gear train combined with the accuracy of
quartz crystal timing. The totally sealed meters are UL/CSA recognized
and come in a variety of mounting styles.
Termination:
Sealing:
Approvals:
Operating temperature:
Voltage range:
6,35 mm [¼ in] blade
IP67
UL, CSA
-40 °C to 85 °C [-40 °F to 185 °F]
10 Vdc to 80 Vdc
6.5 Vdc to 16 Vdc
10 Vdc to 32 Vdc
A
B
C
OPTIONS
Rectangular, stirrup mount
2 Screw, bezel
44,70 (1.76)
54,10 (2.13)
31,75
(1.25)
32,00
(1.26)
23,88
(0.94)
2,03
(0.08)
2,03
(0.08)
6,10
(0.24)
6,10
(0.24)
36,58 (1.44)
47,50
(1.87)
47,50
(1.87)
73,15
(2.88)
8,38
(0.33)
8,38
(0.33)
2 Screw Mount:
Panel cutout 36,83 x 24,13 (1.45 x 0.95)
rectangular opening
2 x 3,81 (0.15) holes spaced 44,45 (1.750)
VOLTAGE RANGE
A
B
Rectangular Stirrup:
Panel cutout 36,83 x 24,13 (1.45 x 0.95)
rectangular opening
VOLTAGE RANGE
C
CAT. LISTING
85094
85331
CAT. LISTING
85010
Rectangular, retainer mount
3 Screw, round
39,37 (1.55)
26,16
(1.03)
Ø
72,64
(2.86)
Ø
55,63
(2.19)
2,54
(0.10)
Ø 50,42 (1.985)
7,11
(0.28)
3,30
(0.13)
47,50
(1.87)
55,63
(2.19)
48,01
(1.89)
8,38
(0.33)
3 Screw Mount:
Panel cutout 50,80 (2.00) Ø opening
3 x 3,81 (0.15) holes equally spaced on a
64,26 (2.53) bolt circle Ø
VOLTAGE RANGE
A
CAT. LISTING
85097
Rectangular Retainer:
Panel cutout 36,83 x 24,13 (1.45 x 0.95) rectangular opening
Sealing:
VOLTAGE RANGE
A
180
www.honeywell.com/sensing
IP66
CAT. LISTING
82320
HOUR METERS
85000 Series
Quartz plus dc hour meters (continued)
Round, 2¼ in [57,15 mm], chrome, flush cup
mount
82400 Series
Quartz dc hour meters, polarity insensitive
Termination:
Sealing:
Approvals:
Operating temperature:
Voltage range:
Ø
57,66
(2.27)
6,35 mm [¼ in] blade
IP66
UL
-40 °C to 85 °C [-40 °F to 185 °F]
10 Vdc to 80 Vdc
OPTIONS
2 Screw, bezel
Ø
50,80
(2.00)
35,8 (1.41)
7,62
(0.30)
Ø 61,21 (2.41)
31,80
(1.25)
22,6
(0.89)
3,05
(0.12)
2,00
(0.08)
54,10 (2.13)
3,60
(0.14)
47,75
(1.88)
55,60
(2.19)
8,38
(0.33)
Ø 50,42 (1.985)
48,00
(1.89)
Flush Mount (Cup):
Panel cutout 57,66 (2,27)
50,80 (2.00) Ø opening
VOLTAGE RANGE
A
CAT. LISTING
85342
CAT. LISTING
82416
Round, 2¼ in [57,15 mm], black, flush cup mount
Rectangular, retainer mount
39,37 (1.55)
Ø
57,66
(2.27)
26,16
(1.03)
Ø
50,80
(2.00)
2,54
(0.10)
7,62
(0.30)
Ø 61,21 (2.41)
3,05
(0.12)
55,63
(2.19)
48,01
(1.89)
47,75
(1.88)
8,38
(0.33)
Rectangular Retainer:
Panel cutout 36,83 x 24,13 (1.45 x 0.95) rectangular opening
Ø 50,42 (1.985)
Flush Mount (Cup):
Panel cutout 57,66 (2,27)
50,80 (2.00) Ø opening
VOLTAGE RANGE
A
CAT. LISTING
82401
CAT. LISTING
85093
www.honeywell.com/sensing
181
HOUR METERS
82400 Series
Quartz dc hour meters, polarity insensitive
(continued)
20000 Series
Deluxe ac hour meters
Honeywell’s 20000 Series Deluxe ac meter is a completely sealed hour meter
that utilizes a synchronous motor to drive the odometer gear train. Meters
are available in a combination of mounting styles, voltages and frequencies
and are UL Listed, CSA and CE Certified.
Termination:
Sealing:
Approvals:
Operating temperature:
Voltage range:
Round, 2¼ in [57,15 mm], black, retainer mount
A
B
C
D
Screw
IP65
UL, CSA, CE
-54 °C to 68 °C [-65 °F to 154 °F]
120 Vac, 60 Hz
240 Vac, 60 Hz
120 Vac, 50 Hz
240 Vac, 50 Hz
OPTIONS
Ø
56,90
(2.24)
2 Screw, bezel
35,5 (1.40)
Ø
49,78
(1.96)
25,90
22,70
(1.02)
(0.89)
52,60 (2.07)
5,33
(0.21)
2,70
(0.11)
2,79
(0.11)
36,6 (1.44)
4,20
(0.165)
50,80
(2.00)
47,50
(1.87)
64,80
(2.55)
7,62
(0.30)
2 Screw Mount:
Panel cutout 36,83 x 24,13 (1.45 x 0.95) rectangular opening
2 x 3,81 (0.15) holes spaced 44,45 (1.750)
Ø
50,42 (1.985)
CAT. LISTING
82404
VOLTAGE RANGE
A
B
C
D
CAT. LISTING
20001
20007
20028
20029
3 Screw, round
Ø 55,60
(2.19)
Ø 68,60
(2.70)
3,30
(0.13)
Ø 50,40 (1.985)
7,40
(0.29)
46,50
(1.83)
60,50
(2.38)
3 Screw Mount:
Panel cutout 50,8 (2.00) Ø opening
3 x 3,175 (0.125) holes equally spaced on
61,47 (2.42.) circle Ø
VOLTAGE RANGE
A
B
C
D
182
www.honeywell.com/sensing
CAT. LISTING
20017
20019
20016
20018
HOUR METERS
28000 Series
Standard ac hour meters
The Honeywell 28000 Series ac hour meters use a synchronous motor
to drive the odometer gear train. These meters can be used in a wide
variety of potential applications including control panels and medical
applications. All styles are UL, CSA and CE certified.
Termination:
Sealing:
Approvals:
Operating temperature:
Voltage range:
A
B
C
D
6,35 mm [¼ in] blade
IP64
UL, CSA, CE
-54 °C to 68 °C [-65 °F to 154 °F]
120 Vac, 60 Hz
240 Vac, 60 Hz
120 Vac, 50 Hz
240 Vac, 50 Hz
OPTIONS
Rectangular, retainer mount
39,37 (1.55)
26,16
(1.03)
2,54
(0.10)
55,63
(2.19)
48,01
(1.89)
Rectangular Retainer:
Panel cutout 36,83 x 24,13 (1.45 x 0.95) rectangular opening
VOLTAGE RANGE
A
B
C
D
CAT. LISTING
28000
28004
28002
28006
Round, 2¼ in [57,15 mm], retainer mount
VOLTAGE RANGE
A
CAT. LISTING
28030
www.honeywell.com/sensing
183
KEY SWITCHES
Key Switches
Honeywell Key switches are custom engineered, environmentally sealed,
sliding contact switches. They can be designed to match existing keys or to
use a six tumbler mechanism with up to 300 unique key combinations. The
stainless steel keyhole shroud and keyhole dust shutter contribute to the
durability of the assembly while O-rings protect the contact and rotor
assembly from moisture and contamination.
Key switches can be used in off-highway, material handling or other
potential applications where environmental specifications must be met.
They have been tested for temperature, vibration, dust, cycling,
humidity, pressure wash and salt fog and mount into a 22,10 mm [0.87
in] hole in panels 3,81 mm to 6,35 mm [0.15 in to 0.25 in] thick.
Standard configurations are shown below, others are available. Contact
your Honeywell sales representative for more information.
Mechanical life:
Operating temperature:
25000 cycles
-40 °C to 85 °C
[-40 °F to 185 °F]
Screw or Packard MetriPack 280 Series
Screw - 20 A, 12 Vdc
10 A, 24 Vdc
4 A, 48 Vdc
Packard MetriPack - 20 A, 12 Vac
8 A, 24 Vac
Connector:
Electrical rating:
2 Position
3 Position
3 Position
OFF
ON
OFF
45˚
45˚
ON
OFF - ON
45˚
45˚
START
OFF
OFF - ON - START
(Key removable in OFF position)
4 Position
ON
PREHEAT
45˚
ON
ON
OFF
ON - OFF - ON
(Key removable in OFF position)
45˚
22.5˚
22.5˚
START
OFF - ON - PREHEAT - START
(Key removable in OFF position)
OPTIONS
Integral connector
Screw terminals
39,88
1.57
72,39
2.85
43,43
1.71
Ø
41,15
1.62
Ø
41,15
1.62
SWITCH POSITIONS
2 (Off/On)
3 (Off/On/Start)
3 (On/Off/On)
184
74,93
2.95
CAT. LISTING
84828
84829
84830
SWITCH POSITIONS
2 (Off/On)
3 (Off/On/Start)
3 (Off/On/Start, Magneto Ground)
4 (Off/On/Preheat/Start)
www.honeywell.com/sensing
CAT. LISTING
84825
84826
89165
89477
PUSH/PULL SWITCHES
Push/Pull Switches
Honeywell’s Push/Pull switches are robust, environmentally sealed,
positive action, sliding contact switches incorporating two circuits with
multiple combinations. The switch can be designed with a single contact
closure in either the push or pull position, two contact closures in either
the push or pull positions or a single contact closure in both the push
and pull position. For more details on these options, contact a Honeywell
sales office. The dual O-ring design protects the contact chamber by
isolating it from moisture or any other contaminant.
These switches may be suitable for the demands of harsh environments
found in off-highway, material handling or other applications where
rapid, positive action is required.
Mechanical life:
Operating temperature:
25000 cycles
-40 °C to 100 °C
[-40 °F to 212 °F]
Screw Terminals
20 A, 12 to 14 Vdc
10 A, 24 Vdc
IP67
Connector:
Electrical rating:
Sealing:
Mounting panel
thickness
1,27 - 4,83
(0.05 - 0.19)
72,01
(2.835)
CIRCUITRY
2NO Circuits in Push
1NO/1NC Circuits in Push
28,32
(1.115)
CAT. LISTING
87941
87943
www.honeywell.com/sensing
185
SHIFTERS
Honeywell electromechanical shifters are often ideal for meeting the
direction and speed control requirements of most off-highway
applications. They are completely sealed and are built to withstand the
harsh environments of the off-highway industry.
Shifters
Mounting clamps for shifters and turn signals are available to order
separately, with or without locating pin, for column sizes shown in order
guides.
Standard configurations are shown below, others are available. Contact your
Honeywell sales representative for more information.
Mechanical life:
Rotary
Shifter handle
Lever
1 million cycles (2 A, 12 V load)
500,000 cycles
with drop down neutral lock
3 million cycles
without drop down neutral lock
5 million cyles
Sealing:
IP67
Operating temperature:
-40 °C to 85 °C
[-40 °F to 185 °F]
Supply voltage:
3V to 32 V operation [12 V or 24 V typ.]
Mounts to column size:
38 mm, 45 mm or 55 mm
[1.50 in, 1.77 in or 2.17 in]
Neutral lock:
Drop down
Connector:
Integral Packard, Integral Deutsch or Wire harness
220,47
(8.68)
27,94
(1.10)
Shifter - FNR
Forward, Neutral, Reverse
OPTIONS
Column size 38 mm or 45 mm [1.50 in or 1.77 in]
Integral Packard connector
FEATURES
Neutral lock
No neutral lock
Neutral lock/Wash/wipe
CAT. LISTING
80438
81521
86835
MOUNTING
left
CAT. LISTING
80909
Wire harness connector
198,50
(7.50)
FEATURES
Neutral lock
59,18
(2.33)
Column size 55 mm [2.17 in]
Integral Deutsch connector
Ø
38,18
(1.503)
75,46
(2.971)
78,79
(3.102)
FEATURES
Neutral lock/Horn
MOUNTING
left
CAT. LISTING
80910
Ø
44,45
(1.750)
12.5˚
N
6,10
(0.24)
12.5˚
F
65,02
(2.56)
Shifter - FNR
Forward, Neutral, Reverse with speed selector
OPTIONS
Twist grip handle with button switch
Button switch handle
Column size 38 mm or 45 mm [1.50 in or 1.77 in]
Integral Deutsch connector
FEATURES
Neutral lock
Neutral lock/button
No neutral lock
Neutral lock
Neutral lock
Optional mounting clamps
COLUMN SIZE
38 mm [1.50 in]
45 mm [1.77 in]
186
MOUNTING
left or right
left or right
right
MOUNTING
left
left
left
left
right
SPEEDS
4
3
3
bump
6
CAT. LISTING
81248
81426
81758
84105
85874
SPEEDS
4
CAT. LISTING
84467
Wire harness connector
CAT. LISTING
80260
80262
FEATURES
Neutral lock
www.honeywell.com/sensing
MOUNTING
left
PROPORTIONAL RETARDERS
Proportional Retarders
Honeywell’s Proportional Retarder is a shift-lever handle that attaches to
the steering column of a vehicle and gives an electronic pulse-widthmodulated output signal that is proportional to the position of the lever.
In standard mounting position, output signal has 10 % duty cycle when
lever is pulled towards operator to maximum extent. When moved away
from operator to its maximum travel, the lever snaps into a detent
indicating the output signal now has 90 % duty cycle. The duty cycle
between these two positions is a continuously variable function of
position.
Housed in a sealed unit with a rugged, positive locking connector, the
proportional retarder has reverse voltage, short circuit and over voltage
protection.
Travel:
Supply Voltage:
25° maximum angle travel
9 Vdc to 32 Vdc
(12 Vdc to 24 Vdc operating system)
Base Frequency:
500 Hz, ± 10 % over temperature and input voltage
Duty Cycle:
10 % to 90 %, ± 5 % at limits of travel
Output Voltage:
Pulse-width-modulated, 0 V to 7 V amplitude
Wiring and Connection:
Receptacle compatible with
positive-locking Deutsch DT06-6S connector
with 18 AWG (minimum wiring to conform to 1E815)
www.honeywell.com/sensing
187
TURN SIGNALS
Turn signal
Turn Signals
Integral Deutsch connector
FEATURES
COLUMN SIZE
MM [IN]
55 [2.17]
CAT. LISTING
80877
Turn signal with wiper control
Honeywell Turn signal switches are built to complement the Honeywell
shifters or can be mounted independently. A variety of potential
operations are available such as wiper speeds, head lamp control, button
and auto cancel options.
Integral Deutsch connector
FEATURES
Wash
Wash
COLUMN SIZE
MM [IN]
38/45 [1.50/1.77]
55 [2.17]
WIPER
SPEEDS
Hi/Lo
1
CAT. LISTING
80350
80876
These switches can be tailored to meet your design requirements;
contact Honeywell for more information.
Mechanical life:
Turn signal
Wiper
Washer
Head lamp dimmer
50,000 cycles (8 A, 12 V load)
50,000 cycles (2 A, 12 V load)
20,000 cycles (2 A, 12 V load)
20,000 cycles (15 A, 12 V load)
Sealing:
IP67
Operating temperature:
-40 °C to 85 °C
[-40 °F to 185 °F]
Supply voltage:
3V to 32 V operation (12 V or 24 V typ.)
Mounts to column size:
38 mm, 45 mm, 55 mm
[1.50 in, 1.77 in, 2.17 in]
Connector:
Integral Packard, Integral Deutsch or Wire harness
232,16
(9.14)
Ø
36,07
(1.42)
Turn signal with head lamp control
OPTIONS
Integral Packard connector
FEATURES
COLUMN SIZE
MM [IN]
45 [1.77]
LIGHTS
CAT. LISTING
Hazard warning
84884
Integral Deutsch connector
230,63
(9.08)
FEATURES
COLUMN SIZE
MM [IN]
Horn/side marker
61,98
(2.44)
LIGHTS
CAT. LISTING
45 [1.77]
Head lamp switch/Dimmer 81705
Wire harness connector
50,8
(2.00)
FEATURES
Ø
38,18
(1.503)
COLUMN SIZE
MM [IN]
45 [1.77]
LIGHTS
CAT. LISTING
Head lamp switch
79809
12.5˚
1
8 7
5 6
2
12 11 10 9
3
65,02
(2.56)
4
12.5˚
78,99
(3.11)
82,80
84,07 (3.26)
(3.31)
Ø
55,12
(2.17)
Turn signal with wiper and head lamp
control
OPTIONS
Integral Deutsch connector
FEATURES
Plain handle
Button switch handle
Wash
FEATURES
188
WIPER SPEEDS
LIGHTS
CAT. LISTING
1
Head lamp
dimmer/Flash
81601
Wire harness connector
Optional mounting clamps
COLUMN SIZE
38 mm [1.50 in]
45 mm [1.77 in]
COLUMN SIZE
MM [IN]
45 [1.77]
CAT. LISTING
80260
80262
Wash
Wash
Wash/Horn/Auto cancel
Wash/Horn
COLUMN SIZE
MM [IN]
45 [1.77]
45 [1.77]
38/45 [1.50/1.77]
45 [1.77]
www.honeywell.com/sensing
WIPER SPEEDS
LIGHTS
CAT. LISTING
1
Hi/Lo/Intermittent
Hi/Lo/Intermittent
Hi/Lo
Dimmer/Flash
Dimmer
Dimmer/Flash
Dimmer/Flash
80279
82570
86320
86508
LIGHTING
Lighting products
Standard Beam Patterns
100'
50'
Sealing:
Electrical rating (Voltage/Wattage/Current]:A
B
IP67
12 Vdc/50 W/4 A
24 Vdc/60 W/2.5 A
1000'
Honeywell continues the Hobbs tradition of rugged, off-highway work
lamps. More than 20 million incandescent and halogen work lamps
have been put to use in some of the most rugged working environments
imaginable. Because they are designed for potential use in heavy
construction and farming equipment, they are also designed to take
shock, vibration and other extreme service conditions in their stride.
Flood
50 Ft. x 30 Ft.
Trap
25 Ft. x 100 Ft.
Spot
1000 Ft.
Halogen Swivel Mount Lamps
Honeywell offers a full line of heavy-duty, halogen, off highway, vehicle
lamps to keep equipment moving long after the sun has set. Our halogen
lamp housings are constructed of durable, vibration resistant materials. The
securing hardware is zinc plated steel with a black dichromate coating.
Reflectors are vacuum metalised. The borosiliate glass lenses are highly
resistant to cracking, especially when subjected to extreme temperature
changes.
Mounting:
Stud, ½ in [12,7 mm) Ø
OPTIONS
4 in x 6 in [101,6 mm x 152,4 mm]
3 in x 5 in [76,2 mm x 127,0 mm]
Dimensions in inches (millimetres)
5.89
(149,60)
REF
3.09
(78,49)
REF
3.15
(80,01)
REF
3.77
3.77 REF
(95,76)
REF
Dimensions in inches (millimetres)
3.12
(78,25)
REF
3.53
(89,66)
REF
6.90
(175,3)
REF
4.49
(114,0)
REF
1/2-13 NC-2
STUD
2.24
(56,89)
REF
3.10
(78,7)
REF
1.2-13 NC-2
BEAM PATTERN
Wide Flood
Trapezoid
Spot
ELECTRICAL RATING
A
A
A
CAT. LISTING
73761
73763
73764
Stud
3.16
(80,26)
REF
BEAM PATTERN
Wide Flood
Wide Flood
Trapezoid
Trapezoid
Spot
Spot
www.honeywell.com/sensing
ELECTRICAL RATING
A
B
A
B
A
B
CAT. LISTING
71898
72540
71915
72542
71902
72544
189
LIGHTING
Replacement Sealed Beams
Round Halogen Lamps, PAR 36
Replacement sealed beams are offered in both 3 in x 5 in [76,2 mm x
127,0 mm] and 4 in x 6 in [101,6 mm x 152,4 mm] rectangular size
lenses. These are designed with the same rugged construction as the
originals and are designed to meet the same demanding standards.
These lamps are also designed to withstand tough environmental
conditions, such as sudden temperature change, shock and intense
vibration.
The PAR 36 Halogen work lamp may be well suited to more traditional
agricultural equipment applications. They are virtually the same 4.5 in
[114,3 mm] diameter lamps that have been factory-installed on popular
makes of combines and tractors over the years.
4.5 in [114,3 mm] Ø lamp
OPTIONS
Dimensions in inches [millimetres]
5.25
(133,35)
4.5
(114,30)
3 in x 5 in [76,2 mm x 127,0 mm]
Dimensions in inches (millimetres)
5.25
(133,35)
3.53
(89,66)
REF
5.89
(149,61)
REF
BEAM PATTERN
Wide Flood
Trapezoid
Spot
ELECTRICAL RATING
A
A
A
CAT. LISTING
72408
72801
73804
BEAM PATTERN
Wide flood
Trapezoid
4 in x 6 in [101,6 mm x 152,4 mm]
Dimensions in inches (millimetres)
4.49
(114.05)
REF
6.90
(175,26)
REF
BEAM PATTERN
Wide Flood
Wide Flood
Trapezoid
Trapezoid
Spot
Spot
190
ELECTRICAL RATING
A
B
A
B
A
B
CAT. LISTING
71017
72541
71792
72543
71794
72545
www.honeywell.com/sensing
ELECTRICAL RATING
A
A
CAT. LISTING
73468
73469
SEALED SWITCHES
LIGHTING
Portable Work Lamp
HID Xenon
High Intensity Discharge Lamps
The Portable work lamp is often ideal for situations when temporary
lighting is required. It can be used to replace failed equipment lighting,
light dark areas, or service equipment. It is also useful for recreational
activities.
It operates by plugging the connector into a 12 Vdc cigarette lighter. The
work lamp is supplied with a 15 foot [4,92 metre] electrical cable and an
80 lb [36,4 kg] magnet in the base.
3 in x 5 in [76,2 mm x 127,0 mm]
with handle and switch
Honeywell Xenon high intensity discharge lamps are designed to hold up
to the extreme demands of the off-highway construction and agricultural
markets. HID technology is significantly more efficient than halogen and
produces more light with less amperage draw.
HID lamps can provide up to three times the light output compared to
the average halogen lamp. The technology allows equipment to operate
more safely with less load on the electrical system resulting in optimum
alternator and battery life.
Honeywell’s HID features an electronic bulb/igniter/ballast system for
enhanced performance throughout a broad temperature and vibration
range. This reduces normal failure modes including filament breakage
producing a life expectancy up to six times greater than a typical halogen
lamp.
Dimensions in inches [millimetres]
6.00
(152,40)
Electrical rating:
Operating voltage range:
Startup amperage:
3.50
(88,90)
Stabilised amperage:
Startup time:
4.75
(120,65)
12 V [42 W]
9 V to 16 V
15 A @ 9 V,
9 A @ 16 V
15 A @ 9 V,
2.7 A @ 16 V
0.1 to 5 seconds
138,94
(5.47)
BEAM PATTERN
Wide flood
Spot
ELECTRICAL RATING
A
A
CAT. LISTING
80413
80510
146,05
(5.75)
24 V [42 W]
10 V to 32 V
8 A @ 14 V,
5 A @ 32 V
3.3 A @ 14 V,
1.4 A @ 32 V
0.1 to 5 seconds
152,50 ± 19,05
(6.00 ± 0.75)
to back of housing
5,08 (0.20)
strip
138,94
(5.47)
189,23
(7.45)
#16 GA. black wire (-)
#16 GA. red wire (+)
22,35
(0.88)
57,15
(2.25)
76,96
(3.03)
1/2-13 NC-2
Stud
12 Volt (System requirement of 42 Watts]
35 W D1S source
Wide flood
Spot
CAT. LISTING
84760-50
88217-50
24 Volt (System requirement of 42 Watts]
35 W D1S source
Wide flood
Trapezoid
www.honeywell.com/sensing
CAT. LISTING
88735-50
88913-50
191
LIGHTING
Honeywell’s marine lamps are completely weatherproof. They are totally
sealed against moisture ingress, and the mounting hardware is stainless
steel to prevent rust and corrosion. The housing is shock resistant and can
withstand up to 6 G vibration. The flood pattern illuminates an area 80° wide
by 30° long.
Marine Lamps
Suitable applications for Honeywell marine lamps include:
• Engine compartment lighting
• Deck lighting
• Emergency lighting
• Launching and docking
• Spreader lights
• Shrimp and fishing boats
• Off-shore oil rigs
• Ocean vessels
• Barges
• Dry dock lighting
• Freighters, tankers, etc.
• Pleasure craft
• Anywhere a corrosion resistant
lamp is needed
3 in x 5 in lamp with
spreader bracket
OPTIONS
3 in x 5 in [76,2 mm x 127,0 mm]
4 in x 6 in [101,6 mm x 152,4 mm]
Dimensions in inches (millimetres)
3.12
(78,25)
REF
Dimensions in inches (millimetres)
5.89
(149,60)
REF
3.09
(78,49)
REF
3.15
(80,01)
REF
6.90
(175,3)
REF
4.49
(114,0)
REF
3.53
(89,66)
REF
2.24
(56,89)
REF
3.10
(78,7)
REF
1/2-13 NC-2
STUD
3.77
3.77 REF
(95,76)
REF
1.2-13 NC-2
Stud
3.16
(80,26)
REF
Stud mount lamp
Stud mount lamp
Dimensions in inches (millimetres)
3.53
(89,66)
REF
5.89
(149,61)
REF
Replacement Sealed Beam
BEAM PATTERN
MOUNTING
Wide Flood
Stud
ELECTRICAL
RATING
A
LAMP
CAT. LISTING
73620
REPLACEMENT SEALED
BEAM CAT. LISTING
74041
Flush mount lamp
Dimensions in inches (millimetres)
4.49
(114.05)
REF
6.90
(175,26)
REF
Replacement Sealed Beam
192
BEAM PATTERN
MOUNTING
Wide
Wide
Wide
Wide
Spot
Spot
Spot
Spot
Flush
Stud
Flush
Stud
Flush
Stud
Flush
Stud
flood
flood
flood
flood
www.honeywell.com/sensing
ELECTRICAL
RATING
A
A
B
B
A
A
B
B
LAMP
CAT. LISTING
72656
71723
72666
72530
72715
72716
72717
72718
REPLACEMENT SEALED
BEAM CAT. LISTING
72108
72108
72728
72728
72719
72719
72720
72720
LIGHTING
Marine HID Lamps
Custom Vehicle Lighting
Honeywell’s HID marine lamps are completely weatherproof. They are
totally sealed against moisture ingress, and the mounting hardware is
stainless steel to prevent rust and corrosion.
138,94
(5.47)
146,05
(5.75)
152,50 ± 19,05
(6.00 ± 0.75)
to back of housing
5,08 (0.20)
strip
138,94
(5.47)
189,23
(7.45)
#16 GA. black wire (-)
#16 GA. red wire (+)
22,35
(0.88)
57,15
(2.25)
76,96
(3.03)
Lighting products designed to the form, fit and functional requirements
of OEM vehicles is the fastest growing segment in lighting. Continual
investment in the latest equipment and software allows optical designs to be
created in unique shapes and sizes to meet this need.
Honeywell Product Management and Engineering personnel can offer a
complete custom design based upon the goals provided. Our manufacturing
facilities are equipped to produce such lights in a matter of weeks. This
quick turn around for prototype and production components is aimed at
meeting even the most aggressive project timetables.
1/2-13 NC-2
Stud
12 Volt (System requirement of 42 Watts]
35 W D1S source
BEAM PATTERN
Wide flood
Trapezoid
Spot
CAT. LISTING
88432
89444
89445
24 Volt (System requirement of 42 Watts]
35 W D1S source
BEAM PATTERN
Wide flood
Trapezoid
Spot
CAT. LISTING
89446
89447
89448
www.honeywell.com/sensing
193
OTHER VEHICLE CONTROLS
Other Vehicle
Controls
Honeywell Sensing and Control’s broad product
and technology portfolio combined with
industry experience and application know-how
offers customers a wealth of choice:
• Custom engineered solutions for applicationspecific designs and product packaging
Pressure switches
•
•
Extensive portfolio of existing designs
•
•
Custom designs possible
•
Modular designs
Designed for transportation-related applications
(12 Vdc)
Potential applications include engine oil pressure,
compressor air pressure, heavy truck air brake
pressure, transmission fluid pressure
• Proven technology
• Low cost
• Automotive grade
• Extensive portfolio of designs
• Extensive high-volume experience
Circuit breakers
•
•
•
•
•
•
Extensive portfolio of existing designs
•
5 A to 50 A
Designed for 12 Vdc applications
Type 1 automatic reset
Type 2 remote reset
Type 3 manual reset
Multiple designs, terminal styles, and mounting
brackets
Mechanical switches
•
•
•
•
194
Extensive portfolio of existing designs
Designed for 12 Vdc applications
Multiple designs and terminal styles
Potential applications include neutral start,
reverse lamp, and 4WD transfer case mode
indication
www.honeywell.com/sensing
PRECISION AEROSPACE
Precision
Aerospace
If you have ever traveled by air, chances are
you’ve flown with equipment by Honeywell
Sensing and Control. We have been meeting
demanding aerospace applications since 1952
under these brand names:
Flight control actuation
•
Linear and rotary flight control actuators with
integral position feedback, clutches, brakes,
dual motors and other options.
•
These linear actuators are typically used for
helicopter blade control. Many small aircraft
use our rotary actuators in their autopilot
systems.
• Courter
• Bendix
• Eclipse-Pioneer
• Sperry
Flight control position sensing
•
Our linear and rotary position transmitters solve
challenging measurement problems in harsh
environments.
•
Added value through features such as integral
gear-train and discreet switches, non-linear
response, viewing window, auto-rig-lock feature.
• MICRO SWITCH
• Valetin
Cockpit controls
•
Force and torque sensors integrated into flight control
linkage measure pilot input forces.
•
Speedbrake, flap selector, and other pilot input devices
incorporating built-in detents, servo backdrive, and up
to quad-channel redundant output.
Cockpit indicators
•
Analog cockpit indicators serve potential applications
such as angle of attack, fuel quantity, fuel flow.
•
Dial, pointer and range markings can be designed to
meet almost any customer requirement.
•
Instruments can be either wedge lighted, backlit,
unlighted, or night vision compliant.
Pressure switches and transmitters
•
Pressure switches for a variety of potential
applications including engine, hydraulics, and bleedair. Available in a wide operating range with preset
dead-band.
•
Our extremely rugged electromechanical pressure
transmitters operate at 250 °C [482 °F] and pressures
as high as 11,000 psi and feature ac output.
www.honeywell.com/sensing
195
PRODUCT OVERVIEW
HONEYWELL SENSING AND CONTROL PRODUCTS
Selecting the right sensor or switch for your application has never been easier. Honeywell Sensing and Control has one of the broadest product ranges
of any supplier in the world, and the depth of our technology and product lines ensure you are able to find the right product for most applications.
We also have the outstanding technical support staff and responsive service to back this up, so you can always find what you need, when you need it.
We aim to supply on time, every time, anywhere in the world.
Honeywell - Taking the risk and high costs out of system critical sensing and control.
You can find out more about Honeywell’s extensive product range by visiting our website at
www.honeywell.com/sensing
There you can browse our interactive catalogue and discover our full range of products for use in Industrial, Automotive, Aviation, Transportation,
Motion Control, Medical applications and more. Some of our more popular product families include:
Accelerometers
Utilizing Quartz Flexure and Resonating Beam technologies for inertial,
control, and industrial applications.
Automotive Sensors
Speed and position sensors for engine management, wheel speed sensors,
and position sensors for comfort, convenience, and motor control
applications.
Basic Switches
Standard size, miniature, subminiature, hermetically sealed, and high
temperature snap-action switches for applications requiring compactness,
light weight, accurate repeatability and long life.
Current Sensors
Adjustable linear, null balance, digital, and linear output current sensors for
monitoring ac or dc current.
Electronic and Electromechanical Safety products for
Machine Safeguarding
Safety light curtains, laser scanners, mats, door interrupt devices and single
and multi-beam optoelectronic devices for industrial machine safety. Safety
interlock switches, limit switches and cable-pull limit switches for industrial
machine safety. Safety control modules for industrial machine safety.
Environment Sealed Switches and Sensors
Designed for use in the harsh environments encountered in aerospace,
transportation, ordnance and marine applications.
The meter family includes LCD, Counter, Battery Controller, AC ElectroMechanical and DC Electro-Mechanical.
Humidity Sensors
Relative humidity/temperature and relative humidity sensors in chemically
resistant packages to accommodate harsh environments.
Infrared Sensors
Optoelectronic standard infrared emitting diodes (IREDs), sensors and
assemblies for object presence, limit, and motion sensing, position
encoding, and movement counting.
Limit and Enclosed Switches
Heavy duty limit switches, enclosed switches (precision snap-acting switches
sealed in rugged metal housing) and sealed and explosion-proof switches.
Liquid Level Sensors
Basic and industrial (designed for harsh industrial environments) liquid level
sensors used to indicate the presence or absence of liquid.
Mass Airflow Sensors
Amplified and unamplified microbridge mass airflow sensors provide a
sensitive and fast response to the flow of air or other gas over the chip.
Off-Highway Vehicular Lighting
Honeywell’s Hobbs brand halogen sealed beams, composites, custom
designer lights, specialty lighting and indicator modules for vehicular and
non-vehicular applications.
Position Sensors
Fibre Optic Sensors
Active optoelectronic components and sub-assemblies (LEDs/transmitters,
fiber-DIPs, receivers and modules) for the datacom market.
Hall-effect, magnetoresistive, and potentiometric devices for detecting the
presence of a magnetic field or linear and rotary position.
Force Sensors
Enhanced reliability and performance in compact commercial grade
packaging.
Hour Meters
Honeywell’s Hobbs brand products are designed for elapsed time
measurement for testing, leasing, maintenance and warranty programs.
196
www.honeywell.com/sensing
PRODUCT OVERVIEW
Pressure Sensors
Thermal Products
A wide offering of media-isolated pressure sensors with multiple
pressure ports and electrical signals for a variety of potential applications
including the monitoring and control of corrosive media in aggressive
environments.
Bimetal thermostats, Discrete and Packaged Thermistors, Precision Hi-Rel
Negative Temperature Coefficient (NTC) Thermistors, Thermal cut offs and
Flexible Heaters
Proximity Sensors
Megopak thermocouples, thermocouples with protecting tubes,
Radiamatic/Rayotube Sensors, and the platinum RTD 100 Ohm.
Severe environment proximity sensors designed for use in applications
with particularly demanding requirements on temperature, vibration,
shock, and EMI/lightning resistance.
Pushbuttons, Keyswitches and Indicators
MICRO SWITCH brand pushbuttons, keyswitches, and indicators for use
anywhere manual operation is desired.
Railway Sensors and Control Systems
Railwheel proximity sensors, interface modules, train departure control
systems, solid state sensors, pressure sensors and electromechanical
switches for potential on-board and off-board rail industry applications.
Relays
General-purpose power relays and relay sockets designed for a wide range of
applications that require stability and reliability.
Resolvers
Absolute position sensors which provides high angular accuracy, high
resolution and repeatability under severe environmental conditions.
Temperature Sensors
Platinum- and silicon-based thin film resistance temperature devices (RTDs)
for applications that require small package size, accuracy, and linear outputs.
Thermocouples, Non-contact probes and RTDs
Toggle and Rocker Switches
MICRO SWITCH brand toggles, rockers and paddle switches for use
anywhere manual operation is desired. Military grade and environment
sealed options are available.
Turbidity Sensors
Wash process turbidity sensors to improve product quality, minimize
ingredient consumption, and reduce wastewater discharge in commercial
and industrial bath applications.
Ultrasonic Sensors
Ultrasonic position sensors for presence/absence sensing, precision distance
sensing or tracking for areas where other sensing technologies have
difficulty, such as clear or shiny objects, foggy or particle laden air, or
splashing liquids.
VRS Speed and Timing Sensors
Completely self-powered, VRS (magnetic) sensors are simple, rugged
devices that do not require an external voltage source for operation. They are
generally used to provide speed, timing or synchronization data to a display
(or control circuitry) in the form of a pulse train.
This list of our products is not exhaustive,
so check out our full range at
www.honeywell.com/sensing
www.honeywell.com/sensing
197
NEW TECHNOLOGIES
New Technologies
and Emerging
Capabilities
Honeywell Sensing and Control is constantly developing new technologies to keep customers
competitive and at the forefront of their businesses. We excel at delivering innovative sensing and
switching solutions with best use of technology. We are able to combine our different sensing
technologies to offer differentiating solutions with enhanced precision and accuracy for the
increasingly complex needs of our customers. Our range of technologies, combined with our
application expertise and our customization capability, is what makes our sensors and switches
leaders in their fields.
Wireless Pressure and Torque Sensors
New sensing capabilities using Surface Acoustic Wave (SAW) technology
Potential Applications
• Electronic power steering
• Electro-hydraulic power steering
• Active suspension control
• Limited slip drive train controls
• Transmissions
Emissions sensors
New sensing technologies to measure Exhaust gas recirculation (EGR) mass flow, In- cylinder
pressure, oxygen, particulate matter, ammonia, nitrogen oxide.
198
www.honeywell.com/sensing
INDEX
Index
101HS1 . . . . . . . . . . . . . . . . . . . . . .
101TL1-21 . . . . . . . . . . . . . . . . . . . .
102HS1 . . . . . . . . . . . . . . . . . . . . . .
102TL2-2 . . . . . . . . . . . . . . . . . . . . .
102TL2-3 . . . . . . . . . . . . . . . . . . . . .
109HM1 . . . . . . . . . . . . . . . . . . . . . .
111SM1 . . . . . . . . . . . . . . . . . . . . . .
111SM2-T . . . . . . . . . . . . . . . . . . . .
114HM1-2 . . . . . . . . . . . . . . . . . . . .
1172CX12 . . . . . . . . . . . . . . . . . . . . .
1172CX2 . . . . . . . . . . . . . . . . . . . . . .
11CX12 . . . . . . . . . . . . . . . . . . . . . . .
11CX12E . . . . . . . . . . . . . . . . . . . . . .
11CX2 . . . . . . . . . . . . . . . . . . . . . . . .
11CX2E . . . . . . . . . . . . . . . . . . . . . . .
11HM1 . . . . . . . . . . . . . . . . . . . . . . .
11NT1-2 . . . . . . . . . . . . . . . . . . . . .
11NT1-3 . . . . . . . . . . . . . . . . . . . . .
11NT1-7 . . . . . . . . . . . . . . . . . . . . .
11NT1-7-NH . . . . . . . . . . . . . . . . . .
11SM1 . . . . . . . . . . . . . . . . . . . . . . .
11SM601-H4 . . . . . . . . . . . . . . . . . .
11SX1-T . . . . . . . . . . . . . . . . . . . . .
11TS115-3 . . . . . . . . . . . . . . . . . . .
11TS15-1 . . . . . . . . . . . . . . . . . . . .
11TS15-2 . . . . . . . . . . . . . . . . . . . .
11TS15-6 . . . . . . . . . . . . . . . . . . . .
11TS15-7 . . . . . . . . . . . . . . . . . . . .
11TS95-2 . . . . . . . . . . . . . . . . . . . .
11TS95-7 . . . . . . . . . . . . . . . . . . . .
11TW1-1L . . . . . . . . . . . . . . . . . . . .
11TW1-2 . . . . . . . . . . . . . . . . . . . . .
11TW1-3 . . . . . . . . . . . . . . . . . . . . .
11TW1-3D . . . . . . . . . . . . . . . . . . . .
11TW1-7 . . . . . . . . . . . . . . . . . . . . .
11TW8-2 . . . . . . . . . . . . . . . . . . . . .
11TW8-3 . . . . . . . . . . . . . . . . . . . . .
11TW8-5 . . . . . . . . . . . . . . . . . . . . .
11TW8-7 . . . . . . . . . . . . . . . . . . . . .
120000 . . . . . . . . . . . . . . . . . . . . . .
120001 . . . . . . . . . . . . . . . . . . . . . .
120002 . . . . . . . . . . . . . . . . . . . . . .
120003 . . . . . . . . . . . . . . . . . . . . . .
120004 . . . . . . . . . . . . . . . . . . . . . .
120005 . . . . . . . . . . . . . . . . . . . . . .
120006 . . . . . . . . . . . . . . . . . . . . . .
120007 . . . . . . . . . . . . . . . . . . . . . .
120008 . . . . . . . . . . . . . . . . . . . . . .
12HR1-S . . . . . . . . . . . . . . . . . . . . .
12HR8-6 . . . . . . . . . . . . . . . . . . . . .
12NT1-3 . . . . . . . . . . . . . . . . . . . . .
12PA4 . . . . . . . . . . . . . . . . . . . . . . .
129
142
129
141
141
127
106
106
126
65
65
65
65
65
65
127
151
151
152
152
106
106
106
156
156
156
156
156
156
156
144
144
144
144
144
144
144
144
144
116
116
116
116
116
116
116
116
116
138
138
151
158
12PA5-BK . . . . . . . . . . . . . . . . . . . .
12PA5-BL . . . . . . . . . . . . . . . . . . . .
12PA5-G . . . . . . . . . . . . . . . . . . . . .
12PA5-R . . . . . . . . . . . . . . . . . . . . .
12PA5-W . . . . . . . . . . . . . . . . . . . . .
12PA5-Y . . . . . . . . . . . . . . . . . . . . .
12PA6 . . . . . . . . . . . . . . . . . . . . . . .
12SE4-T . . . . . . . . . . . . . . . . . . . . .
12TL1-2 . . . . . . . . . . . . . . . . . . . . . .
12TL1-3 . . . . . . . . . . . . . . . . . . . . . .
12TS115-3 . . . . . . . . . . . . . . . . . . .
12TS15-2 . . . . . . . . . . . . . . . . . . . .
12TS15-3 . . . . . . . . . . . . . . . . . . . .
12TS15-7 . . . . . . . . . . . . . . . . . . . .
12TS95-10 . . . . . . . . . . . . . . . . . . .
12TS95-3 . . . . . . . . . . . . . . . . . . . .
12TW1-1 . . . . . . . . . . . . . . . . . . . . .
12TW1-3 . . . . . . . . . . . . . . . . . . . . .
12TW1-3D . . . . . . . . . . . . . . . . . . . .
12TW1-50 . . . . . . . . . . . . . . . . . . . .
12TW1-50M . . . . . . . . . . . . . . . . . .
12TW1-7 . . . . . . . . . . . . . . . . . . . . .
12TW1-70 . . . . . . . . . . . . . . . . . . . .
12TW29-1 . . . . . . . . . . . . . . . . . . . .
12TW29-7 . . . . . . . . . . . . . . . . . . . .
12TW75-3 . . . . . . . . . . . . . . . . . . . .
12TW75-7 . . . . . . . . . . . . . . . . . . . .
12TW8-3 . . . . . . . . . . . . . . . . . . . . .
12TW8-7 . . . . . . . . . . . . . . . . . . . . .
13HM1 . . . . . . . . . . . . . . . . . . . . . . .
14CE1-1 . . . . . . . . . . . . . . . . . . . . . .
14CE1-1A . . . . . . . . . . . . . . . . . . . . .
14CE1-1G . . . . . . . . . . . . . . . . . . . . .
14CE1-2 . . . . . . . . . . . . . . . . . . . . . .
14CE1-3 . . . . . . . . . . . . . . . . . . . . . .
14CE1-3A . . . . . . . . . . . . . . . . . . . . .
14CE1-3G . . . . . . . . . . . . . . . . . . . . .
14CE1-AQ . . . . . . . . . . . . . . . . . . . . .
14CE1-Q . . . . . . . . . . . . . . . . . . . . . .
14CE101-1 . . . . . . . . . . . . . . . . . . . .
14CE101-10 . . . . . . . . . . . . . . . . . . .
14CE101-2 . . . . . . . . . . . . . . . . . . . .
14CE101-3 . . . . . . . . . . . . . . . . . . . .
14CE101-4 . . . . . . . . . . . . . . . . . . . .
14CE101-5 . . . . . . . . . . . . . . . . . . . .
14CE101-6 . . . . . . . . . . . . . . . . . . . .
14CE102-1 . . . . . . . . . . . . . . . . . . . .
14CE102-12 . . . . . . . . . . . . . . . . . . .
14CE102-15 . . . . . . . . . . . . . . . . . . .
14CE102-3 . . . . . . . . . . . . . . . . . . . .
14CE102-3G . . . . . . . . . . . . . . . . . . .
14CE102-5 . . . . . . . . . . . . . . . . . . . .
14CE102-6 . . . . . . . . . . . . . . . . . . . .
14CE102-6G . . . . . . . . . . . . . . . . . . .
14CE102-8 . . . . . . . . . . . . . . . . . . . .
14CE103-1 . . . . . . . . . . . . . . . . . . . .
158
158
158
158
158
158
158
122
141
141
156
156
156
156
156
156
144
144
144
144
144
144
144
144
144
144
144
144
144
127
24
24
24
24
24
24
24
24
24
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
www.honeywell.com/sensing
14CE103-3 . . . . . . . . . . . . . . . . . . . .
14CE118-1 . . . . . . . . . . . . . . . . . . . .
14CE118-10 . . . . . . . . . . . . . . . . . . .
14CE118-6 . . . . . . . . . . . . . . . . . . . .
14CE16-1 . . . . . . . . . . . . . . . . . . . . .
14CE16-2 . . . . . . . . . . . . . . . . . . . . .
14CE16-3 . . . . . . . . . . . . . . . . . . . . .
14CE18-1 . . . . . . . . . . . . . . . . . . . . .
14CE18-3 . . . . . . . . . . . . . . . . . . . . .
14CE18-Q . . . . . . . . . . . . . . . . . . . . .
14CE2-1 . . . . . . . . . . . . . . . . . . . . . .
14CE2-1A . . . . . . . . . . . . . . . . . . . . .
14CE2-1G . . . . . . . . . . . . . . . . . . . . .
14CE2-2 . . . . . . . . . . . . . . . . . . . . . .
14CE2-2A . . . . . . . . . . . . . . . . . . . . .
14CE2-3 . . . . . . . . . . . . . . . . . . . . . .
14CE2-3A . . . . . . . . . . . . . . . . . . . . .
14CE2-3G . . . . . . . . . . . . . . . . . . . . .
14CE2-AQ . . . . . . . . . . . . . . . . . . . . .
14CE2-Q . . . . . . . . . . . . . . . . . . . . . .
14CE20-1 . . . . . . . . . . . . . . . . . . . . .
14CE20-3 . . . . . . . . . . . . . . . . . . . . .
14CE3-1 . . . . . . . . . . . . . . . . . . . . . .
14CE3-2 . . . . . . . . . . . . . . . . . . . . . .
14CE3-3 . . . . . . . . . . . . . . . . . . . . . .
14CE31-1 . . . . . . . . . . . . . . . . . . . . .
14CE31-3 . . . . . . . . . . . . . . . . . . . . .
14CE66-1 . . . . . . . . . . . . . . . . . . . . .
14CE66-2 . . . . . . . . . . . . . . . . . . . . .
14NT1-3 . . . . . . . . . . . . . . . . . . . . .
14XE1 . . . . . . . . . . . . . . . . . . . . . . .
14XE1-T . . . . . . . . . . . . . . . . . . . . .
15HM2 . . . . . . . . . . . . . . . . . . . . . . .
15HM5 . . . . . . . . . . . . . . . . . . . . . . .
16CX12 . . . . . . . . . . . . . . . . . . . . . . .
16CX2 . . . . . . . . . . . . . . . . . . . . . . . .
18CX0 . . . . . . . . . . . . . . . . . . . . . . . .
18CX10 . . . . . . . . . . . . . . . . . . . . . . .
18CX10E . . . . . . . . . . . . . . . . . . . . . .
19HM1 . . . . . . . . . . . . . . . . . . . . . . .
19HM4 . . . . . . . . . . . . . . . . . . . . . . .
19PA137-HM . . . . . . . . . . . . . . . . . .
1CPSA1 . . . . . . . . . . . . . . . . . . . . . .
1CPSA1A . . . . . . . . . . . . . . . . . . . .
1CPSA1B . . . . . . . . . . . . . . . . . . . .
1CPSA2 . . . . . . . . . . . . . . . . . . . . . .
1CPSA2A . . . . . . . . . . . . . . . . . . . .
1CPSA2B . . . . . . . . . . . . . . . . . . . .
1CPSA3 . . . . . . . . . . . . . . . . . . . . . .
1CPSA3A . . . . . . . . . . . . . . . . . . . .
1CPSA3B . . . . . . . . . . . . . . . . . . . .
1CPSA4 . . . . . . . . . . . . . . . . . . . . . .
1CPSA5 . . . . . . . . . . . . . . . . . . . . . .
1CPSA6 . . . . . . . . . . . . . . . . . . . . . .
1CPSA6A . . . . . . . . . . . . . . . . . . . .
1CPSA6B . . . . . . . . . . . . . . . . . . . .
58
58
58
58
25
25
25
24
24
24
24
24
24
24
24
24
24
24
24
24
25
25
25
25
25
24
24
24
24
151
124
124
127
127
65
65
65
65
65
127
127
127
100
100
100
100
100
100
100
100
100
100
100
100
100
100
199
INDEX
1CPSA7 . . . . . . . . . . . . . . . . . . . . . .
1CPSA8 . . . . . . . . . . . . . . . . . . . . . .
1CPSC1 . . . . . . . . . . . . . . . . . . . . . .
1CPSC1A . . . . . . . . . . . . . . . . . . . .
1CPSC2 . . . . . . . . . . . . . . . . . . . . . .
1CPSC2A . . . . . . . . . . . . . . . . . . . .
1CPSC2B . . . . . . . . . . . . . . . . . . . .
1CPSC3 . . . . . . . . . . . . . . . . . . . . . .
1CPSC3A . . . . . . . . . . . . . . . . . . . .
1CPSC4 . . . . . . . . . . . . . . . . . . . . . .
1CPSC5 . . . . . . . . . . . . . . . . . . . . . .
1CPSC6 . . . . . . . . . . . . . . . . . . . . . .
1CPSC6A . . . . . . . . . . . . . . . . . . . .
1CPSC7 . . . . . . . . . . . . . . . . . . . . . .
1CPSC8 . . . . . . . . . . . . . . . . . . . . . .
1EN1-6 . . . . . . . . . . . . . . . . . . . . . .
1EN231-6 . . . . . . . . . . . . . . . . . . . .
1EN51-6 . . . . . . . . . . . . . . . . . . . . .
1EN61-6 . . . . . . . . . . . . . . . . . . . . .
1EN75-R . . . . . . . . . . . . . . . . . . . . .
1EN75-R3 . . . . . . . . . . . . . . . . . . . .
1EN76-R . . . . . . . . . . . . . . . . . . . . .
1EX1 . . . . . . . . . . . . . . . . . . . . . . . . .
1HE1-6 . . . . . . . . . . . . . . . . . . . . . .
1HE222-6 . . . . . . . . . . . . . . . . . . . .
1HS1 . . . . . . . . . . . . . . . . . . . . . . . .
1HS3 . . . . . . . . . . . . . . . . . . . . . . . .
1HS41 . . . . . . . . . . . . . . . . . . . . . . .
1HS6 . . . . . . . . . . . . . . . . . . . . . . . .
1HT1 . . . . . . . . . . . . . . . . . . . . . . . .
1LS1 . . . . . . . . . . . . . . . . . . . . . . . . .
1LS1-4C . . . . . . . . . . . . . . . . . . . . . .
1LS1-L . . . . . . . . . . . . . . . . . . . . . . .
1LS10 . . . . . . . . . . . . . . . . . . . . . . . .
1LS10-4C . . . . . . . . . . . . . . . . . . . . .
1LS10-L . . . . . . . . . . . . . . . . . . . . . .
1LS131 . . . . . . . . . . . . . . . . . . . . . . .
1LS19 . . . . . . . . . . . . . . . . . . . . . . . .
1LS19-4C . . . . . . . . . . . . . . . . . . . . .
1LS2 . . . . . . . . . . . . . . . . . . . . . . . . .
1LS2-4C . . . . . . . . . . . . . . . . . . . . . .
1LS2-L . . . . . . . . . . . . . . . . . . . . . . .
1LS23 . . . . . . . . . . . . . . . . . . . . . . . .
1LS243 . . . . . . . . . . . . . . . . . . . . . . .
1LS243-4C . . . . . . . . . . . . . . . . . . . .
1LS3 . . . . . . . . . . . . . . . . . . . . . . . . .
1LS3-4C . . . . . . . . . . . . . . . . . . . . . .
1LS3-L . . . . . . . . . . . . . . . . . . . . . . .
1LS47 . . . . . . . . . . . . . . . . . . . . . . . .
1LS501 . . . . . . . . . . . . . . . . . . . . . . .
1LS53 . . . . . . . . . . . . . . . . . . . . . . . .
1LS56 . . . . . . . . . . . . . . . . . . . . . . . .
1LS58 . . . . . . . . . . . . . . . . . . . . . . . .
1LS59 . . . . . . . . . . . . . . . . . . . . . . . .
1LS6 . . . . . . . . . . . . . . . . . . . . . . . . .
1LS9 . . . . . . . . . . . . . . . . . . . . . . . . .
200
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
133
133
133
133
134
134
134
61
137
137
129
128
129
129
130
30
30
30
31
31
31
30
30
30
31
31
31
31
30
30
30
30
30
31
30
31
31
30
30
30
31
1NT1-1 . . . . . . . . . . . . . . . . . . . . . .
1NT1-2 . . . . . . . . . . . . . . . . . . . . . .
1NT1-2G . . . . . . . . . . . . . . . . . . . . .
1NT1-3 . . . . . . . . . . . . . . . . . . . . . .
1NT1-3-NH . . . . . . . . . . . . . . . . . . .
1NT1-3D . . . . . . . . . . . . . . . . . . . . .
1NT1-5 . . . . . . . . . . . . . . . . . . . . . .
1NT1-6 . . . . . . . . . . . . . . . . . . . . . .
1NT1-7 . . . . . . . . . . . . . . . . . . . . . .
1NT1-7-NH . . . . . . . . . . . . . . . . . . .
1NT1-7E . . . . . . . . . . . . . . . . . . . . .
1NT1-8 . . . . . . . . . . . . . . . . . . . . . .
1NT1-8-NH . . . . . . . . . . . . . . . . . . .
1NT20-7E . . . . . . . . . . . . . . . . . . . .
1NT231-7 . . . . . . . . . . . . . . . . . . . .
1NT91-2 . . . . . . . . . . . . . . . . . . . . .
1NT91-7 . . . . . . . . . . . . . . . . . . . . .
1SE1 . . . . . . . . . . . . . . . . . . . . . . . .
1SE1-T . . . . . . . . . . . . . . . . . . . . . .
1SE2 . . . . . . . . . . . . . . . . . . . . . . . .
1SE3 . . . . . . . . . . . . . . . . . . . . . . . .
1SE61-T . . . . . . . . . . . . . . . . . . . . .
1SE7 . . . . . . . . . . . . . . . . . . . . . . . .
1SX1-T . . . . . . . . . . . . . . . . . . . . . .
1TB1-2 . . . . . . . . . . . . . . . . . . . . . .
1TL1-1 . . . . . . . . . . . . . . . . . . . . . . .
1TL1-1A . . . . . . . . . . . . . . . . . . . . .
1TL1-2 . . . . . . . . . . . . . . . . . . . . . . .
1TL1-21 . . . . . . . . . . . . . . . . . . . . . .
1TL1-2D . . . . . . . . . . . . . . . . . . . . .
1TL1-2G . . . . . . . . . . . . . . . . . . . . .
1TL1-3 . . . . . . . . . . . . . . . . . . . . . . .
1TL1-3D . . . . . . . . . . . . . . . . . . . . .
1TL1-5 . . . . . . . . . . . . . . . . . . . . . . .
1TL1-6 . . . . . . . . . . . . . . . . . . . . . . .
1TL1-61 . . . . . . . . . . . . . . . . . . . . . .
1TL1-7 . . . . . . . . . . . . . . . . . . . . . . .
1TL1-7E . . . . . . . . . . . . . . . . . . . . . .
1TL1-8 . . . . . . . . . . . . . . . . . . . . . . .
1TL1-8F . . . . . . . . . . . . . . . . . . . . . .
1TL150-3D . . . . . . . . . . . . . . . . . . .
1TP1-6 . . . . . . . . . . . . . . . . . . . . . .
1TP12-7 . . . . . . . . . . . . . . . . . . . . .
1TP201-7 . . . . . . . . . . . . . . . . . . . .
1TP8-2 . . . . . . . . . . . . . . . . . . . . . .
1TP8-3 . . . . . . . . . . . . . . . . . . . . . .
1TP8-7 . . . . . . . . . . . . . . . . . . . . . .
1TW1-3 . . . . . . . . . . . . . . . . . . . . . .
1XE1 . . . . . . . . . . . . . . . . . . . . . . . .
1XE1-T . . . . . . . . . . . . . . . . . . . . . .
1XE201 . . . . . . . . . . . . . . . . . . . . . .
1XE3 . . . . . . . . . . . . . . . . . . . . . . . .
1XE301 . . . . . . . . . . . . . . . . . . . . . .
1XE401-6 . . . . . . . . . . . . . . . . . . . .
1XE401-T . . . . . . . . . . . . . . . . . . . .
1XE99-T . . . . . . . . . . . . . . . . . . . . .
152
151
151
151
151
151
152
151
152
152
152
151
151
152
152
151
152
122
122
122
122
122
122
106
105
142
142
141
142
141
141
141
141
142
141
142
142
142
141
141
141
158
158
158
158
158
158
144
124
124
124
124
124
124
124
124
www.honeywell.com/sensing
20001 . . . . . . . . . . . . . . . . . . . . . . .
20007 . . . . . . . . . . . . . . . . . . . . . . .
20016 . . . . . . . . . . . . . . . . . . . . . . .
20017 . . . . . . . . . . . . . . . . . . . . . . .
20018 . . . . . . . . . . . . . . . . . . . . . . .
20019 . . . . . . . . . . . . . . . . . . . . . . .
2001EN1-6 . . . . . . . . . . . . . . . . . . .
20028 . . . . . . . . . . . . . . . . . . . . . . .
20029 . . . . . . . . . . . . . . . . . . . . . . .
20HM1-1 . . . . . . . . . . . . . . . . . . . . .
21CX14 . . . . . . . . . . . . . . . . . . . . . . .
21CX4 . . . . . . . . . . . . . . . . . . . . . . . .
21EN75-R1 . . . . . . . . . . . . . . . . . . .
21EN9-6 . . . . . . . . . . . . . . . . . . . . .
22HR1-S . . . . . . . . . . . . . . . . . . . . .
24CE1-S12B . . . . . . . . . . . . . . . . . . .
24CE1-S2 . . . . . . . . . . . . . . . . . . . . .
24CE1-S2A . . . . . . . . . . . . . . . . . . . .
24CE1-S2B . . . . . . . . . . . . . . . . . . . .
24CE1-S3 . . . . . . . . . . . . . . . . . . . . .
24CE1-S6 . . . . . . . . . . . . . . . . . . . . .
24CE1-Y1A . . . . . . . . . . . . . . . . . . . .
24CE1-Y2 . . . . . . . . . . . . . . . . . . . . .
24CE1-Y3 . . . . . . . . . . . . . . . . . . . . .
24CE16-S1 . . . . . . . . . . . . . . . . . . . .
24CE16-Y1 . . . . . . . . . . . . . . . . . . . .
24CE16-Y6 . . . . . . . . . . . . . . . . . . . .
24CE2-S1 . . . . . . . . . . . . . . . . . . . . .
24CE2-S2 . . . . . . . . . . . . . . . . . . . . .
24CE2-S2A . . . . . . . . . . . . . . . . . . . .
24CE2-S2B . . . . . . . . . . . . . . . . . . . .
24CE2-S3 . . . . . . . . . . . . . . . . . . . . .
24CE2-S6 . . . . . . . . . . . . . . . . . . . . .
24CE2-T2 . . . . . . . . . . . . . . . . . . . . .
24CE2-Y1 . . . . . . . . . . . . . . . . . . . . .
24CE2-Y2 . . . . . . . . . . . . . . . . . . . . .
24CE2-Y2A . . . . . . . . . . . . . . . . . . . .
24CE2-Y4 . . . . . . . . . . . . . . . . . . . . .
24CE2-Y6A . . . . . . . . . . . . . . . . . . . .
24CE28-S2 . . . . . . . . . . . . . . . . . . . .
24CE3-S2 . . . . . . . . . . . . . . . . . . . . .
24CE3-Y1 . . . . . . . . . . . . . . . . . . . . .
24CE3-Y2 . . . . . . . . . . . . . . . . . . . . .
24CE31-S1 . . . . . . . . . . . . . . . . . . . .
24CE31-S2 . . . . . . . . . . . . . . . . . . . .
24CE31-S2B . . . . . . . . . . . . . . . . . . .
24CE31-S5 . . . . . . . . . . . . . . . . . . . .
24CE31-Y1 . . . . . . . . . . . . . . . . . . . .
24CE31-Y2 . . . . . . . . . . . . . . . . . . . .
24CE31-Y3 . . . . . . . . . . . . . . . . . . . .
24CE55-S1 . . . . . . . . . . . . . . . . . . . .
24CE55-S2 . . . . . . . . . . . . . . . . . . . .
24CE55-Y1 . . . . . . . . . . . . . . . . . . . .
24CX12 . . . . . . . . . . . . . . . . . . . . . . .
24CX2 . . . . . . . . . . . . . . . . . . . . . . . .
25ET1-T-F . . . . . . . . . . . . . . . . . . . .
182
182
182
182
182
182
134
182
182
126
65
65
134
134
138
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
28
28
28
28
28
28
28
28
28
28
28
28
28
28
65
65
148
INDEX
25ET117-T . . . . . . . . . . . . . . . . . . . .
25ET61-6 . . . . . . . . . . . . . . . . . . . . .
25ET61-S . . . . . . . . . . . . . . . . . . . .
25ET61-S-F . . . . . . . . . . . . . . . . . . .
25ET61-T . . . . . . . . . . . . . . . . . . . . .
25ET62-6 . . . . . . . . . . . . . . . . . . . . .
25ET64-6 . . . . . . . . . . . . . . . . . . . . .
26900 . . . . . . . . . . . . . . . . . . . . . . .
26901 . . . . . . . . . . . . . . . . . . . . . . .
26902 . . . . . . . . . . . . . . . . . . . . . . .
26903 . . . . . . . . . . . . . . . . . . . . . . .
26904 . . . . . . . . . . . . . . . . . . . . . . .
26905 . . . . . . . . . . . . . . . . . . . . . . .
26906 . . . . . . . . . . . . . . . . . . . . . . .
26907 . . . . . . . . . . . . . . . . . . . . . . .
26908 . . . . . . . . . . . . . . . . . . . . . . .
26909 . . . . . . . . . . . . . . . . . . . . . . .
26911 . . . . . . . . . . . . . . . . . . . . . . .
26912 . . . . . . . . . . . . . . . . . . . . . . .
26913 . . . . . . . . . . . . . . . . . . . . . . .
26914 . . . . . . . . . . . . . . . . . . . . . . .
26CX4 . . . . . . . . . . . . . . . . . . . . . . . .
26ET1-R-F . . . . . . . . . . . . . . . . . . . .
26ET1-T-F . . . . . . . . . . . . . . . . . . . .
26ET107-T . . . . . . . . . . . . . . . . . . . .
26ET61-T . . . . . . . . . . . . . . . . . . . . .
26ET65-T . . . . . . . . . . . . . . . . . . . . .
27ET118-T2-N . . . . . . . . . . . . . . . . .
27ET2-6-E . . . . . . . . . . . . . . . . . . . .
27ET61-T . . . . . . . . . . . . . . . . . . . . .
27ET61-T-E . . . . . . . . . . . . . . . . . . .
27ET71-T . . . . . . . . . . . . . . . . . . . . .
27ET71-T-E . . . . . . . . . . . . . . . . . . .
28000 . . . . . . . . . . . . . . . . . . . . . . .
28002 . . . . . . . . . . . . . . . . . . . . . . .
28004 . . . . . . . . . . . . . . . . . . . . . . .
28006 . . . . . . . . . . . . . . . . . . . . . . .
28030 . . . . . . . . . . . . . . . . . . . . . . .
281CX12 . . . . . . . . . . . . . . . . . . . . . .
281CX2 . . . . . . . . . . . . . . . . . . . . . . .
29ET3 . . . . . . . . . . . . . . . . . . . . . . .
2CPSA1A1 . . . . . . . . . . . . . . . . . . .
2CPSA1A1A . . . . . . . . . . . . . . . . . .
2CPSA1A1B . . . . . . . . . . . . . . . . . .
2CPSA1A2 . . . . . . . . . . . . . . . . . . .
2CPSA1A2A . . . . . . . . . . . . . . . . . .
2CPSA1A2B . . . . . . . . . . . . . . . . . .
2CPSA1A3 . . . . . . . . . . . . . . . . . . .
2CPSA1A3A . . . . . . . . . . . . . . . . . .
2CPSA1A3B . . . . . . . . . . . . . . . . . .
2CPSA1B1 . . . . . . . . . . . . . . . . . . .
2CPSA1B1A . . . . . . . . . . . . . . . . . .
2CPSA1B1B . . . . . . . . . . . . . . . . . .
2CPSA1B2 . . . . . . . . . . . . . . . . . . .
2CPSA1B2A . . . . . . . . . . . . . . . . . .
2CPSA1B2B . . . . . . . . . . . . . . . . . .
148
148
148
148
148
148
148
117
117
117
117
117
117
117
117
117
117
117
117
117
117
65
148
148
148
148
148
148
148
148
148
148
148
183
183
183
183
183
65
65
148
101
101
101
101
101
101
101
101
101
101
101
101
101
101
101
2CPSA1B3 . . . . . . . . . . . . . . . . . . .
2CPSA1B3A . . . . . . . . . . . . . . . . . .
2CPSA1B3B . . . . . . . . . . . . . . . . . .
2CPSA2A1 . . . . . . . . . . . . . . . . . . .
2CPSA2A1A . . . . . . . . . . . . . . . . . .
2CPSA2A1B . . . . . . . . . . . . . . . . . .
2CPSA2A2 . . . . . . . . . . . . . . . . . . .
2CPSA2A2A . . . . . . . . . . . . . . . . . .
2CPSA2A2B . . . . . . . . . . . . . . . . . .
2CPSA2A3 . . . . . . . . . . . . . . . . . . .
2CPSA2A3A . . . . . . . . . . . . . . . . . .
2CPSA2A3B . . . . . . . . . . . . . . . . . .
2CPSA2B1 . . . . . . . . . . . . . . . . . . .
2CPSA2B1A . . . . . . . . . . . . . . . . . .
2CPSA2B1B . . . . . . . . . . . . . . . . . .
2CPSC1A1 . . . . . . . . . . . . . . . . . . .
2CPSC1A1A . . . . . . . . . . . . . . . . . .
2CPSC1A2 . . . . . . . . . . . . . . . . . . .
2CPSC1A2A . . . . . . . . . . . . . . . . . .
2CPSC1A3 . . . . . . . . . . . . . . . . . . .
2CPSC1A3A . . . . . . . . . . . . . . . . . .
2CPSC1D1A . . . . . . . . . . . . . . . . . .
2EN1-6 . . . . . . . . . . . . . . . . . . . . . .
2EX1 . . . . . . . . . . . . . . . . . . . . . . . . .
2HM19-1 . . . . . . . . . . . . . . . . . . . . .
2HM19-5 . . . . . . . . . . . . . . . . . . . . .
2HT1 . . . . . . . . . . . . . . . . . . . . . . . .
2LS1 . . . . . . . . . . . . . . . . . . . . . . . . .
2LS1-4C . . . . . . . . . . . . . . . . . . . . . .
2LS1-L . . . . . . . . . . . . . . . . . . . . . . .
2LS111 . . . . . . . . . . . . . . . . . . . . . . .
2NT1-1 . . . . . . . . . . . . . . . . . . . . . .
2NT1-1-NH . . . . . . . . . . . . . . . . . . .
2NT1-10 . . . . . . . . . . . . . . . . . . . . .
2NT1-2 . . . . . . . . . . . . . . . . . . . . . .
2NT1-3 . . . . . . . . . . . . . . . . . . . . . .
2NT1-3-NH . . . . . . . . . . . . . . . . . . .
2NT1-5 . . . . . . . . . . . . . . . . . . . . . .
2NT1-50 . . . . . . . . . . . . . . . . . . . . .
2NT1-7 . . . . . . . . . . . . . . . . . . . . . .
2NT1-7-NH . . . . . . . . . . . . . . . . . . .
2NT1-70 . . . . . . . . . . . . . . . . . . . . .
2NT1-8 . . . . . . . . . . . . . . . . . . . . . .
2NT1-8-NH . . . . . . . . . . . . . . . . . . .
2NT231-7 . . . . . . . . . . . . . . . . . . . .
2NT889-70 . . . . . . . . . . . . . . . . . . .
2NT91-7 . . . . . . . . . . . . . . . . . . . . .
2TL1-1 . . . . . . . . . . . . . . . . . . . . . . .
2TL1-10 . . . . . . . . . . . . . . . . . . . . . .
2TL1-10A . . . . . . . . . . . . . . . . . . . .
2TL1-12 . . . . . . . . . . . . . . . . . . . . . .
2TL1-1A . . . . . . . . . . . . . . . . . . . . .
2TL1-2 . . . . . . . . . . . . . . . . . . . . . . .
2TL1-21 . . . . . . . . . . . . . . . . . . . . . .
2TL1-2D . . . . . . . . . . . . . . . . . . . . .
2TL1-3 . . . . . . . . . . . . . . . . . . . . . . .
101
101
101
101
101
101
101
101
101
101
101
101
101
101
101
101
101
101
101
101
101
101
133
61
126
126
130
32
32
32
32
152
152
152
151
151
151
152
152
152
152
152
151
151
152
152
152
142
142
142
142
142
141
142
141
142
www.honeywell.com/sensing
2TL1-31K . . . . . . . . . . . . . . . . . . . .
2TL1-3D . . . . . . . . . . . . . . . . . . . . .
2TL1-3G . . . . . . . . . . . . . . . . . . . . .
2TL1-5 . . . . . . . . . . . . . . . . . . . . . . .
2TL1-50 . . . . . . . . . . . . . . . . . . . . . .
2TL1-56 . . . . . . . . . . . . . . . . . . . . . .
2TL1-6 . . . . . . . . . . . . . . . . . . . . . . .
2TL1-7 . . . . . . . . . . . . . . . . . . . . . . .
2TL1-70 . . . . . . . . . . . . . . . . . . . . . .
2TL1-70E . . . . . . . . . . . . . . . . . . . . .
2TL1-8 . . . . . . . . . . . . . . . . . . . . . . .
2TL1-8F . . . . . . . . . . . . . . . . . . . . . .
2TP1-7 . . . . . . . . . . . . . . . . . . . . . .
2TP12-7 . . . . . . . . . . . . . . . . . . . . .
2TP216-7 . . . . . . . . . . . . . . . . . . . .
2TP216-8 . . . . . . . . . . . . . . . . . . . .
2TP7-3 . . . . . . . . . . . . . . . . . . . . . .
311SX5-T . . . . . . . . . . . . . . . . . . . .
31EN1-6 . . . . . . . . . . . . . . . . . . . . .
31EN11-6 . . . . . . . . . . . . . . . . . . . .
31NT91-1 . . . . . . . . . . . . . . . . . . . .
31NT91-2 . . . . . . . . . . . . . . . . . . . .
31NT91-3 . . . . . . . . . . . . . . . . . . . .
31NT91-6 . . . . . . . . . . . . . . . . . . . .
31NT91-7 . . . . . . . . . . . . . . . . . . . .
32EN1-6 . . . . . . . . . . . . . . . . . . . . .
32EN11-6 . . . . . . . . . . . . . . . . . . . .
32NT291-3G . . . . . . . . . . . . . . . . . .
32NT291-5E . . . . . . . . . . . . . . . . . .
32NT91-1 . . . . . . . . . . . . . . . . . . . .
32NT91-2 . . . . . . . . . . . . . . . . . . . .
32NT91-3 . . . . . . . . . . . . . . . . . . . .
32NT91-7 . . . . . . . . . . . . . . . . . . . .
32NT91-7-NH . . . . . . . . . . . . . . . . .
32NT94-70L . . . . . . . . . . . . . . . . . .
33EN1-6 . . . . . . . . . . . . . . . . . . . . .
33EN11-6 . . . . . . . . . . . . . . . . . . . .
34EN1-6 . . . . . . . . . . . . . . . . . . . . .
34EN11-6 . . . . . . . . . . . . . . . . . . . .
3EN1-6 . . . . . . . . . . . . . . . . . . . . . .
3HT1 . . . . . . . . . . . . . . . . . . . . . . . .
3LS1 . . . . . . . . . . . . . . . . . . . . . . . . .
3LS1-4C . . . . . . . . . . . . . . . . . . . . . .
402EN1-6 . . . . . . . . . . . . . . . . . . . .
404EN1-6 . . . . . . . . . . . . . . . . . . . .
41EN1-6 . . . . . . . . . . . . . . . . . . . . .
42EN1-6 . . . . . . . . . . . . . . . . . . . . .
44EN1-6 . . . . . . . . . . . . . . . . . . . . .
4EN1-6 . . . . . . . . . . . . . . . . . . . . . .
4EX1-3 . . . . . . . . . . . . . . . . . . . . . . .
4HS4-118 . . . . . . . . . . . . . . . . . . . .
4LS1 . . . . . . . . . . . . . . . . . . . . . . . . .
4LS1-4C . . . . . . . . . . . . . . . . . . . . . .
4NT1-1 . . . . . . . . . . . . . . . . . . . . . .
4NT1-1A . . . . . . . . . . . . . . . . . . . . .
4NT1-3 . . . . . . . . . . . . . . . . . . . . . .
142
142
142
142
142
142
141
142
142
142
142
142
158
158
158
158
158
106
135
135
154
153
153
153
154
135
135
153
154
154
153
153
154
154
154
135
135
135
135
133
130
32
32
136
136
135
135
135
133
61
129
32
32
152
152
151
201
INDEX
4SE1 . . . . . . . . . . . . . . . . . . . . . . . .
4TL1-2 . . . . . . . . . . . . . . . . . . . . . . .
4TL1-3 . . . . . . . . . . . . . . . . . . . . . . .
4TL1-3D . . . . . . . . . . . . . . . . . . . . .
4TL1-7 . . . . . . . . . . . . . . . . . . . . . . .
4TL1-8 . . . . . . . . . . . . . . . . . . . . . . .
4XE1 . . . . . . . . . . . . . . . . . . . . . . . .
5LS1 . . . . . . . . . . . . . . . . . . . . . . . . .
5LS1-4C . . . . . . . . . . . . . . . . . . . . . .
5LS1-L . . . . . . . . . . . . . . . . . . . . . . .
5SE1 . . . . . . . . . . . . . . . . . . . . . . . .
5XE1 . . . . . . . . . . . . . . . . . . . . . . . .
602EN1-6 . . . . . . . . . . . . . . . . . . . .
602EN222-6 . . . . . . . . . . . . . . . . . .
602HE1-6 . . . . . . . . . . . . . . . . . . . .
602HE106-6 . . . . . . . . . . . . . . . . . .
604EN1-6 . . . . . . . . . . . . . . . . . . . .
604EN222-6 . . . . . . . . . . . . . . . . . .
604HE1-6 . . . . . . . . . . . . . . . . . . . .
61NT1-7 . . . . . . . . . . . . . . . . . . . . .
622EN1-6 . . . . . . . . . . . . . . . . . . . .
622EN222-6 . . . . . . . . . . . . . . . . . .
622HE1-6 . . . . . . . . . . . . . . . . . . . .
624EN1-6 . . . . . . . . . . . . . . . . . . . .
624EN222-6 . . . . . . . . . . . . . . . . . .
624HE1-6 . . . . . . . . . . . . . . . . . . . .
64AT22-3 . . . . . . . . . . . . . . . . . . . . .
64AT34-7E . . . . . . . . . . . . . . . . . . . .
6AT124-T . . . . . . . . . . . . . . . . . . . . .
6HM1-1 . . . . . . . . . . . . . . . . . . . . . .
6LS1 . . . . . . . . . . . . . . . . . . . . . . . . .
6LS1-4C . . . . . . . . . . . . . . . . . . . . . .
6LS2 . . . . . . . . . . . . . . . . . . . . . . . . .
6LS2-L . . . . . . . . . . . . . . . . . . . . . . .
6LS3 . . . . . . . . . . . . . . . . . . . . . . . . .
6PA102 . . . . . . . . . . . . . . . . . . . . . . .
6PA127-EX . . . . . . . . . . . . . . . . . . . .
6PA130-EX . . . . . . . . . . . . . . . . . . . .
6PA131-EX . . . . . . . . . . . . . . . . . . . .
6PA136-EX . . . . . . . . . . . . . . . . . . . .
6PA138-EX . . . . . . . . . . . . . . . . . . . .
6PA142-EX . . . . . . . . . . . . . . . . . . . .
6PA144 . . . . . . . . . . . . . . . . . . . . . . .
6PA204-EX . . . . . . . . . . . . . . . . . . . .
6PA5-EX . . . . . . . . . . . . . . . . . . . . . .
6PA57 . . . . . . . . . . . . . . . . . . . . . . . .
6PA63 . . . . . . . . . . . . . . . . . . . . . . . .
6PA69 . . . . . . . . . . . . . . . . . . . . . . . .
6PA80 . . . . . . . . . . . . . . . . . . . . . . . .
6PA82 . . . . . . . . . . . . . . . . . . . . . . . .
6SX7-T . . . . . . . . . . . . . . . . . . . . . .
71017 . . . . . . . . . . . . . . . . . . . . . . .
71723 . . . . . . . . . . . . . . . . . . . . . . .
71792 . . . . . . . . . . . . . . . . . . . . . . .
71794 . . . . . . . . . . . . . . . . . . . . . . .
71898 . . . . . . . . . . . . . . . . . . . . . . .
202
122
141
141
141
142
141
124
32
32
32
122
124
136
136
137
137
136
136
137
152
136
136
137
136
136
137
146
146
146
126
31
31
31
31
31
72
72
72
72
72
72
72
72
72
72
73
72
72
72
72
106
190
192
190
190
189
71902
71915
72108
72408
72530
72540
72541
72542
72543
72544
72545
72656
72666
72715
72716
72717
72718
72719
72720
72728
72801
73468
73469
73761
73763
73764
73804
74041
76051
76052
76053
76054
76055
76061
76062
76063
76064
76065
76575
76576
76577
76578
77342
77343
78628
78632
78813
78815
79700
79702
79704
79708
79710
79718
79719
79720
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
189
189
192
190
192
189
190
189
190
189
190
192
192
192
192
192
192
192
192
192
190
190
190
189
189
189
190
192
114
114
114
114
114
114
114
114
114
114
114
114
114
114
115
115
114
114
115
115
115
115
115
115
115
115
115
115
www.honeywell.com/sensing
79721 . . . . . . . . . . . . . . . . . . . . . . .
79722 . . . . . . . . . . . . . . . . . . . . . . .
79723 . . . . . . . . . . . . . . . . . . . . . . .
79809 . . . . . . . . . . . . . . . . . . . . . . .
7SE1 . . . . . . . . . . . . . . . . . . . . . . . .
80260 . . . . . . . . . . . . . . . . . . . . . . .
80262 . . . . . . . . . . . . . . . . . . . . . . .
80279 . . . . . . . . . . . . . . . . . . . . . . .
80350 . . . . . . . . . . . . . . . . . . . . . . .
80413 . . . . . . . . . . . . . . . . . . . . . . .
80438 . . . . . . . . . . . . . . . . . . . . . . .
80510 . . . . . . . . . . . . . . . . . . . . . . .
80876 . . . . . . . . . . . . . . . . . . . . . . .
80877 . . . . . . . . . . . . . . . . . . . . . . .
80909 . . . . . . . . . . . . . . . . . . . . . . .
80910 . . . . . . . . . . . . . . . . . . . . . . .
81248 . . . . . . . . . . . . . . . . . . . . . . .
81426 . . . . . . . . . . . . . . . . . . . . . . .
81521 . . . . . . . . . . . . . . . . . . . . . . .
81601 . . . . . . . . . . . . . . . . . . . . . . .
81705 . . . . . . . . . . . . . . . . . . . . . . .
81758 . . . . . . . . . . . . . . . . . . . . . . .
81CX14 . . . . . . . . . . . . . . . . . . . . . . .
81CX2 . . . . . . . . . . . . . . . . . . . . . . . .
81CX4 . . . . . . . . . . . . . . . . . . . . . . . .
82320 . . . . . . . . . . . . . . . . . . . . . . .
82400 . . . . . . . . . . . . . . . . . . . . . . .
82401 . . . . . . . . . . . . . . . . . . . . . . .
82404 . . . . . . . . . . . . . . . . . . . . . . .
82416 . . . . . . . . . . . . . . . . . . . . . . .
82570 . . . . . . . . . . . . . . . . . . . . . . .
83298 . . . . . . . . . . . . . . . . . . . . . . .
83299 . . . . . . . . . . . . . . . . . . . . . . .
83301 . . . . . . . . . . . . . . . . . . . . . . .
83302 . . . . . . . . . . . . . . . . . . . . . . .
83304 . . . . . . . . . . . . . . . . . . . . . . .
83305 . . . . . . . . . . . . . . . . . . . . . . .
83307 . . . . . . . . . . . . . . . . . . . . . . .
83308 . . . . . . . . . . . . . . . . . . . . . . .
83310 . . . . . . . . . . . . . . . . . . . . . . .
83311 . . . . . . . . . . . . . . . . . . . . . . .
84105 . . . . . . . . . . . . . . . . . . . . . . .
84467 . . . . . . . . . . . . . . . . . . . . . . .
84760-50 . . . . . . . . . . . . . . . . . . . . .
84825 . . . . . . . . . . . . . . . . . . . . . . .
84826 . . . . . . . . . . . . . . . . . . . . . . .
84828 . . . . . . . . . . . . . . . . . . . . . . .
84829 . . . . . . . . . . . . . . . . . . . . . . .
84830 . . . . . . . . . . . . . . . . . . . . . . .
84884 . . . . . . . . . . . . . . . . . . . . . . .
84CX2 . . . . . . . . . . . . . . . . . . . . . . . .
85010 . . . . . . . . . . . . . . . . . . . . . . .
85093 . . . . . . . . . . . . . . . . . . . . . . .
85094 . . . . . . . . . . . . . . . . . . . . . . .
85097 . . . . . . . . . . . . . . . . . . . . . . .
85331 . . . . . . . . . . . . . . . . . . . . . . .
115
115
115
188
122
186
186
188
188
191
186
191
186
188
186
186
186
186
186
188
188
186
65
65
65
180
181
181
182
181
188
116
116
116
116
116
116
116
116
116
116
186
186
191
184
184
184
184
184
188
65
180
181
180
180
180
INDEX
85342 . . . . . . . . . . . . . . . . . . . . . . .
85874 . . . . . . . . . . . . . . . . . . . . . . .
86320 . . . . . . . . . . . . . . . . . . . . . . .
86508 . . . . . . . . . . . . . . . . . . . . . . .
86835 . . . . . . . . . . . . . . . . . . . . . . .
87941 . . . . . . . . . . . . . . . . . . . . . . .
87943 . . . . . . . . . . . . . . . . . . . . . . .
88217-50 . . . . . . . . . . . . . . . . . . . . .
88432 . . . . . . . . . . . . . . . . . . . . . . .
88735-50 . . . . . . . . . . . . . . . . . . . . .
88913-50 . . . . . . . . . . . . . . . . . . . . .
89165 . . . . . . . . . . . . . . . . . . . . . . .
89444 . . . . . . . . . . . . . . . . . . . . . . .
89445 . . . . . . . . . . . . . . . . . . . . . . .
89446 . . . . . . . . . . . . . . . . . . . . . . .
89447 . . . . . . . . . . . . . . . . . . . . . . .
89448 . . . . . . . . . . . . . . . . . . . . . . .
89477 . . . . . . . . . . . . . . . . . . . . . . .
8LS1 . . . . . . . . . . . . . . . . . . . . . . . . .
8LS1-4C . . . . . . . . . . . . . . . . . . . . . .
8LS1-L . . . . . . . . . . . . . . . . . . . . . . .
8LS125 . . . . . . . . . . . . . . . . . . . . . . .
8LS125-4C . . . . . . . . . . . . . . . . . . . .
8LS152 . . . . . . . . . . . . . . . . . . . . . . .
8LS152-4C . . . . . . . . . . . . . . . . . . . .
8LS3 . . . . . . . . . . . . . . . . . . . . . . . . .
8LS3-4C . . . . . . . . . . . . . . . . . . . . . .
914CE1-3 . . . . . . . . . . . . . . . . . . . . .
914CE1-3A . . . . . . . . . . . . . . . . . . . .
914CE1-3G . . . . . . . . . . . . . . . . . . . .
914CE1-6 . . . . . . . . . . . . . . . . . . . . .
914CE1-6G . . . . . . . . . . . . . . . . . . . .
914CE1-9 . . . . . . . . . . . . . . . . . . . . .
914CE1-Q . . . . . . . . . . . . . . . . . . . . .
914CE1-Q1 . . . . . . . . . . . . . . . . . . . .
914CE16-3 . . . . . . . . . . . . . . . . . . . .
914CE16-3A . . . . . . . . . . . . . . . . . . .
914CE16-6 . . . . . . . . . . . . . . . . . . . .
914CE16-9 . . . . . . . . . . . . . . . . . . . .
914CE16-Q . . . . . . . . . . . . . . . . . . . .
914CE18-3 . . . . . . . . . . . . . . . . . . . .
914CE18-3A . . . . . . . . . . . . . . . . . . .
914CE18-6 . . . . . . . . . . . . . . . . . . . .
914CE18-9 . . . . . . . . . . . . . . . . . . . .
914CE18-9A . . . . . . . . . . . . . . . . . . .
914CE18-AQ1 . . . . . . . . . . . . . . . . . .
914CE18-Q . . . . . . . . . . . . . . . . . . . .
914CE18-Q1 . . . . . . . . . . . . . . . . . . .
914CE19-3 . . . . . . . . . . . . . . . . . . . .
914CE19-9 . . . . . . . . . . . . . . . . . . . .
914CE2-3 . . . . . . . . . . . . . . . . . . . . .
914CE2-3A . . . . . . . . . . . . . . . . . . . .
914CE2-3G . . . . . . . . . . . . . . . . . . . .
914CE2-6 . . . . . . . . . . . . . . . . . . . . .
914CE2-6A . . . . . . . . . . . . . . . . . . . .
914CE2-9 . . . . . . . . . . . . . . . . . . . . .
181
186
188
188
186
185
185
191
193
191
191
184
193
193
193
193
193
184
33
33
33
33
33
33
33
33
33
24
24
24
24
24
24
24
24
25
25
25
25
25
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
914CE2-AQ . . . . . . . . . . . . . . . . . . . .
914CE2-Q . . . . . . . . . . . . . . . . . . . . .
914CE2-Q1 . . . . . . . . . . . . . . . . . . . .
914CE20-3 . . . . . . . . . . . . . . . . . . . .
914CE20-6 . . . . . . . . . . . . . . . . . . . .
914CE20-9 . . . . . . . . . . . . . . . . . . . .
914CE20-Q . . . . . . . . . . . . . . . . . . . .
914CE22-6 . . . . . . . . . . . . . . . . . . . .
914CE27-Q . . . . . . . . . . . . . . . . . . . .
914CE28-3 . . . . . . . . . . . . . . . . . . . .
914CE28-6 . . . . . . . . . . . . . . . . . . . .
914CE28-Q . . . . . . . . . . . . . . . . . . . .
914CE29-3 . . . . . . . . . . . . . . . . . . . .
914CE29-6 . . . . . . . . . . . . . . . . . . . .
914CE3-3 . . . . . . . . . . . . . . . . . . . . .
914CE3-6 . . . . . . . . . . . . . . . . . . . . .
914CE3-6A . . . . . . . . . . . . . . . . . . . .
914CE3-9 . . . . . . . . . . . . . . . . . . . . .
914CE3-Q . . . . . . . . . . . . . . . . . . . . .
914CE3-Q1 . . . . . . . . . . . . . . . . . . . .
914CE31-3 . . . . . . . . . . . . . . . . . . . .
914CE31-6 . . . . . . . . . . . . . . . . . . . .
914CE55-3 . . . . . . . . . . . . . . . . . . . .
914CE55-3A . . . . . . . . . . . . . . . . . . .
914CE66-3 . . . . . . . . . . . . . . . . . . . .
914CE66-6 . . . . . . . . . . . . . . . . . . . .
924CE1-S3 . . . . . . . . . . . . . . . . . . . .
924CE1-S6 . . . . . . . . . . . . . . . . . . . .
924CE1-S9 . . . . . . . . . . . . . . . . . . . .
924CE1-T25A . . . . . . . . . . . . . . . . . .
924CE1-T3 . . . . . . . . . . . . . . . . . . . .
924CE1-T3A . . . . . . . . . . . . . . . . . . .
924CE1-T6A . . . . . . . . . . . . . . . . . . .
924CE1-T9 . . . . . . . . . . . . . . . . . . . .
924CE1-T9A . . . . . . . . . . . . . . . . . . .
924CE1-Y3 . . . . . . . . . . . . . . . . . . . .
924CE1-Y9 . . . . . . . . . . . . . . . . . . . .
924CE16-S3 . . . . . . . . . . . . . . . . . . .
924CE16-S9 . . . . . . . . . . . . . . . . . . .
924CE16-T3 . . . . . . . . . . . . . . . . . . .
924CE16-Y3 . . . . . . . . . . . . . . . . . . .
924CE16-Y9 . . . . . . . . . . . . . . . . . . .
924CE18-S6 . . . . . . . . . . . . . . . . . . .
924CE19-S3L1 . . . . . . . . . . . . . . . . .
924CE2-S15 . . . . . . . . . . . . . . . . . . .
924CE2-S21 . . . . . . . . . . . . . . . . . . .
924CE2-S3 . . . . . . . . . . . . . . . . . . . .
924CE2-S6 . . . . . . . . . . . . . . . . . . . .
924CE2-S6A . . . . . . . . . . . . . . . . . . .
924CE2-S9 . . . . . . . . . . . . . . . . . . . .
924CE2-T25 . . . . . . . . . . . . . . . . . . .
924CE2-T25A . . . . . . . . . . . . . . . . . .
924CE2-T3 . . . . . . . . . . . . . . . . . . . .
924CE2-T6 . . . . . . . . . . . . . . . . . . . .
924CE2-T9 . . . . . . . . . . . . . . . . . . . .
924CE2-Y3 . . . . . . . . . . . . . . . . . . . .
24
24
24
25
25
25
25
24
24
24
24
24
25
25
25
25
25
25
25
25
24
24
25
25
24
24
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
www.honeywell.com/sensing
924CE2-Y9 . . . . . . . . . . . . . . . . . . . .
924CE28-S15 . . . . . . . . . . . . . . . . . .
924CE3-S3 . . . . . . . . . . . . . . . . . . . .
924CE3-S6 . . . . . . . . . . . . . . . . . . . .
924CE3-S9 . . . . . . . . . . . . . . . . . . . .
924CE3-T9 . . . . . . . . . . . . . . . . . . . .
924CE31-S6 . . . . . . . . . . . . . . . . . . .
924CE31-Y20 . . . . . . . . . . . . . . . . . .
924CE31-Y3L1 . . . . . . . . . . . . . . . . .
98101 . . . . . . . . . . . . . . . . . . . . . . .
98102 . . . . . . . . . . . . . . . . . . . . . . .
98103 . . . . . . . . . . . . . . . . . . . . . . .
98106 . . . . . . . . . . . . . . . . . . . . . . .
98108 . . . . . . . . . . . . . . . . . . . . . . .
98109 . . . . . . . . . . . . . . . . . . . . . . .
98110 . . . . . . . . . . . . . . . . . . . . . . .
98111 . . . . . . . . . . . . . . . . . . . . . . .
98202 . . . . . . . . . . . . . . . . . . . . . . . .
98301 . . . . . . . . . . . . . . . . . . . . . . .
98302 . . . . . . . . . . . . . . . . . . . . . . .
98303 . . . . . . . . . . . . . . . . . . . . . . .
98304 . . . . . . . . . . . . . . . . . . . . . . .
98311 . . . . . . . . . . . . . . . . . . . . . . .
98312 . . . . . . . . . . . . . . . . . . . . . . .
98313 . . . . . . . . . . . . . . . . . . . . . . .
98314 . . . . . . . . . . . . . . . . . . . . . . .
98321 . . . . . . . . . . . . . . . . . . . . . . .
98322 . . . . . . . . . . . . . . . . . . . . . . .
98323 . . . . . . . . . . . . . . . . . . . . . . .
98324 . . . . . . . . . . . . . . . . . . . . . . .
98706 . . . . . . . . . . . . . . . . . . . . . . .
98707 . . . . . . . . . . . . . . . . . . . . . . .
98750 . . . . . . . . . . . . . . . . . . . . . . . .
9HM1 . . . . . . . . . . . . . . . . . . . . . . . .
27
28
28
28
28
28
28
28
28
178
177
178
179
179
179
179
177
179
177
177
179
179
177
177
179
179
177
177
179
179
178
178
177
127
B
BA-2RB-A2 . . . . . . . . . . . . . . . . . . .
BA-2RQ1-A2 . . . . . . . . . . . . . . . . . .
BA-2RV-A2 . . . . . . . . . . . . . . . . . . .
BAF1-2RN-LH . . . . . . . . . . . . . . . . . .
BAF1-2RN-RH . . . . . . . . . . . . . . . . . .
BAF1-2RN18-LH . . . . . . . . . . . . . . . .
BAF1-2RN18-RH . . . . . . . . . . . . . . . .
BAF1-2RN2-LH . . . . . . . . . . . . . . . . .
BAF1-2RN2-RH . . . . . . . . . . . . . . . . .
BAF1-2RN28-LH . . . . . . . . . . . . . . . .
BAF1-2RN28-RH . . . . . . . . . . . . . . . .
BAF1-2RN4-LH . . . . . . . . . . . . . . . . .
BAF1-2RN4-RH . . . . . . . . . . . . . . . . .
BAF1-2RQ9-LH . . . . . . . . . . . . . . . . .
BAF1-2RQ9-RH . . . . . . . . . . . . . . . . .
BAF1-2RQN8-LH . . . . . . . . . . . . . . . .
BAF1-2RQN8-RH . . . . . . . . . . . . . . . .
BAF1-3CN18X1 . . . . . . . . . . . . . . . . .
BAF1-3RN2X-LH . . . . . . . . . . . . . . . .
BAF1-3RN2X-RH . . . . . . . . . . . . . . . .
103
103
104
42
42
44
44
43
43
43
43
44
44
43
43
43
43
45
44
44
203
INDEX
BAF1-3RNX1 . . . . . . . . . . . . . . . . . . .
BE-2R-A4 . . . . . . . . . . . . . . . . . . . .
BF Series . . . . . . . . . . . . . . . . . . . . . .
BFL1-AW1 . . . . . . . . . . . . . . . . . . . . .
BFL1-AW2 . . . . . . . . . . . . . . . . . . . . .
BFL1-BL1 . . . . . . . . . . . . . . . . . . . . .
BFL1-BL2 . . . . . . . . . . . . . . . . . . . . .
BFL1-BL3 . . . . . . . . . . . . . . . . . . . . .
BFL1-BP1 . . . . . . . . . . . . . . . . . . . . .
BFL1-BW1 . . . . . . . . . . . . . . . . . . . . .
BFL1-BW3 . . . . . . . . . . . . . . . . . . . . .
BFL1-BW4 . . . . . . . . . . . . . . . . . . . . .
BFR1-BL1 . . . . . . . . . . . . . . . . . . . . .
BFR1-BL2 . . . . . . . . . . . . . . . . . . . . .
BFR1-BL3 . . . . . . . . . . . . . . . . . . . . .
BFR1-BP1 . . . . . . . . . . . . . . . . . . . . .
BFR1-BW1 . . . . . . . . . . . . . . . . . . . . .
BFR1-BW4 . . . . . . . . . . . . . . . . . . . . .
BX4A3K . . . . . . . . . . . . . . . . . . . . . . .
BX4C3K . . . . . . . . . . . . . . . . . . . . . . .
BX4C4L . . . . . . . . . . . . . . . . . . . . . . .
BX4D3K . . . . . . . . . . . . . . . . . . . . . . .
BXA3K . . . . . . . . . . . . . . . . . . . . . . . .
BXA4L . . . . . . . . . . . . . . . . . . . . . . . .
BXC4L . . . . . . . . . . . . . . . . . . . . . . . .
BXF3K . . . . . . . . . . . . . . . . . . . . . . . .
BXN3K . . . . . . . . . . . . . . . . . . . . . . . .
BXN4L . . . . . . . . . . . . . . . . . . . . . . . .
BXR3E . . . . . . . . . . . . . . . . . . . . . . . .
BXR3K . . . . . . . . . . . . . . . . . . . . . . . .
BXR4S . . . . . . . . . . . . . . . . . . . . . . . .
BZ-2R-A2 . . . . . . . . . . . . . . . . . . . .
BZ-2RD-A2 . . . . . . . . . . . . . . . . . . .
BZ-2RDS-A2 . . . . . . . . . . . . . . . . . .
BZ-2RDS-A2S . . . . . . . . . . . . . . . . .
BZ-2RQ1-A2 . . . . . . . . . . . . . . . . . .
BZ-2RQ18-A2 . . . . . . . . . . . . . . . . .
BZ-2RQ181-A2 . . . . . . . . . . . . . . . .
BZ-2RW80-A2 . . . . . . . . . . . . . . . . .
BZ-2RW82-A2 . . . . . . . . . . . . . . . . .
BZ-2RW822 . . . . . . . . . . . . . . . . . . .
BZ-2RW822-A2 . . . . . . . . . . . . . . . .
BZ-2RW8225551-A2 . . . . . . . . . . . .
BZ-2RW826-A2 . . . . . . . . . . . . . . . .
BZ-2RW863-A2 . . . . . . . . . . . . . . . .
BZ-R . . . . . . . . . . . . . . . . . . . . . . . .
BZ-R-A2 . . . . . . . . . . . . . . . . . . . . .
BZ-R169 . . . . . . . . . . . . . . . . . . . . .
BZE6-2RN . . . . . . . . . . . . . . . . . . . . .
BZE6-2RN18 . . . . . . . . . . . . . . . . . . .
BZE6-2RN2 . . . . . . . . . . . . . . . . . . . .
BZE6-2RN234 . . . . . . . . . . . . . . . . . .
BZE6-2RN28 . . . . . . . . . . . . . . . . . . .
BZE6-2RN34 . . . . . . . . . . . . . . . . . . .
BZE6-2RN62 . . . . . . . . . . . . . . . . . . .
BZE6-2RN7 . . . . . . . . . . . . . . . . . . . .
204
44
103
34
35
35
34
35
35
34
35
35
35
34
35
35
34
35
35
67
68
68
68
67
67
68
69
67
67
67
67
67
103
103
104
104
103
104
104
104
104
104
104
104
104
104
103
103
103
37
39
38
38
39
37
39
37
BZE6-2RN72 . . . . . . . . . . . . . . . . . . .
BZE6-2RN80 . . . . . . . . . . . . . . . . . . .
BZE6-2RN81 . . . . . . . . . . . . . . . . . . .
BZE6-2RQ . . . . . . . . . . . . . . . . . . . . .
BZE6-2RQ2 . . . . . . . . . . . . . . . . . . . .
BZE6-2RQ62 . . . . . . . . . . . . . . . . . . .
BZE6-2RQ8 . . . . . . . . . . . . . . . . . . . .
BZE6-2RQ81 . . . . . . . . . . . . . . . . . . .
BZE6-2RQ9 . . . . . . . . . . . . . . . . . . . .
BZE6-RN2X1 . . . . . . . . . . . . . . . . . . .
BZE6-RN80X2 . . . . . . . . . . . . . . . . . .
BZE6-RNX1 . . . . . . . . . . . . . . . . . . . .
BZE6-RQ2X2 . . . . . . . . . . . . . . . . . . .
BZE6-RQ8X2 . . . . . . . . . . . . . . . . . . .
BZE6-RQX2 . . . . . . . . . . . . . . . . . . . .
BZE7-2RN-C . . . . . . . . . . . . . . . . . . .
BZE7-2RN-PG . . . . . . . . . . . . . . . . . .
BZE7-2RN18-PG . . . . . . . . . . . . . . . .
BZE7-2RN2-C . . . . . . . . . . . . . . . . . .
BZE7-2RN2-PG . . . . . . . . . . . . . . . . .
BZE7-2RQ-PG . . . . . . . . . . . . . . . . . .
BZE7-2RQ8-PG . . . . . . . . . . . . . . . . .
BZE7-2RQ81-PG . . . . . . . . . . . . . . . .
BZV6-2RN . . . . . . . . . . . . . . . . . . . . .
BZV6-2RN18 . . . . . . . . . . . . . . . . . . .
BZV6-2RN2 . . . . . . . . . . . . . . . . . . . .
BZV6-2RN4 . . . . . . . . . . . . . . . . . . . .
BZV6-2RN62 . . . . . . . . . . . . . . . . . . .
BZV6-2RN80 . . . . . . . . . . . . . . . . . . .
BZV6-2RQ . . . . . . . . . . . . . . . . . . . . .
BZV6-2RQ2 . . . . . . . . . . . . . . . . . . . .
BZV6-2RQ62 . . . . . . . . . . . . . . . . . . .
BZV6-2RQ8 . . . . . . . . . . . . . . . . . . . .
BZV6-2RQ81 . . . . . . . . . . . . . . . . . . .
37
37
38
37
38
39
37
38
37
40
40
40
40
40
40
41
41
41
41
41
41
41
41
37
39
38
39
39
37
37
38
39
37
38
C
CLSZC1 . . . . . . . . . . . . . . . . . . . . . .
CLSZC2 . . . . . . . . . . . . . . . . . . . . . .
CLSZC3 . . . . . . . . . . . . . . . . . . . . . .
CLSZC4 . . . . . . . . . . . . . . . . . . . . . .
CLSZC5 . . . . . . . . . . . . . . . . . . . . . .
CLSZC7 . . . . . . . . . . . . . . . . . . . . . .
CLSZTC . . . . . . . . . . . . . . . . . . . . . .
CPS-BRACKET . . . . . . . . . . . . . . . .
CPSLED120 . . . . . . . . . . . . . . . . . . .
CPSLED24 . . . . . . . . . . . . . . . . . . . .
CPSZ1S . . . . . . . . . . . . . . . . . . . . . .
CPSZK1 . . . . . . . . . . . . . . . . . . . . . .
CPSZTB . . . . . . . . . . . . . . . . . . . . . .
Custom Switches & Assemblies . . . .
Cargo Loading Systems . . . . . . . .
Flap Selectors . . . . . . . . . . . . . . .
Gear Selectors . . . . . . . . . . . . . . .
Harness Assemblies . . . . . . . . . . .
Operator Interface Products . . . . .
Rotary Switches . . . . . . . . . . . . . .
102
102
102
102
102
102
102
102
102
102
102
102
102
173
174
174
174
173
173
173
www.honeywell.com/sensing
Switch Assemblies . . . . . . . . . . . .
173
DT-2R-A7 . . . . . . . . . . . . . . . . . . . . .
DTE6-2RN . . . . . . . . . . . . . . . . . . . . .
DTE6-2RN2 . . . . . . . . . . . . . . . . . . . .
DTE6-2RN80 . . . . . . . . . . . . . . . . . . .
DTE6-2RQ . . . . . . . . . . . . . . . . . . . . .
DTE6-2RQ81 . . . . . . . . . . . . . . . . . . .
DTE6-2RQ9 . . . . . . . . . . . . . . . . . . . .
DTE7-2RN-PG . . . . . . . . . . . . . . . . . .
DTF2-2RN-LH . . . . . . . . . . . . . . . . . .
DTF2-2RN-RH . . . . . . . . . . . . . . . . . .
DTF2-2RN2-LH . . . . . . . . . . . . . . . . .
DTF2-2RN2-RH . . . . . . . . . . . . . . . . .
DTF2-2RQ9-LH . . . . . . . . . . . . . . . . .
DTF2-2RQ9-RH . . . . . . . . . . . . . . . . .
DTF2-2RQN8-LH . . . . . . . . . . . . . . . .
DTF2-2RQN8-RH . . . . . . . . . . . . . . . .
DTV6-2RN . . . . . . . . . . . . . . . . . . . . .
DTV6-2RN2 . . . . . . . . . . . . . . . . . . . .
105
37
38
37
37
38
37
41
42
42
43
43
43
43
43
43
37
38
D
E
EVN2000A . . . . . . . . . . . . . . . . . . . . .
EVN2000B . . . . . . . . . . . . . . . . . . . . .
EVN2000C . . . . . . . . . . . . . . . . . . . . .
EVN2000D . . . . . . . . . . . . . . . . . . . . .
EX-AR . . . . . . . . . . . . . . . . . . . . . . . .
EX-AR141 . . . . . . . . . . . . . . . . . . . . .
EX-AR16 . . . . . . . . . . . . . . . . . . . . . .
EX-AR1613 . . . . . . . . . . . . . . . . . . . .
EX-AR182 . . . . . . . . . . . . . . . . . . . . .
EX-AR20 . . . . . . . . . . . . . . . . . . . . . .
EX-AR230 . . . . . . . . . . . . . . . . . . . . .
EX-AR30 . . . . . . . . . . . . . . . . . . . . . .
EX-AR400 . . . . . . . . . . . . . . . . . . . . .
EX-AR50 . . . . . . . . . . . . . . . . . . . . . .
EX-AR800 . . . . . . . . . . . . . . . . . . . . .
EX-AR830 . . . . . . . . . . . . . . . . . . . . .
EX-CR . . . . . . . . . . . . . . . . . . . . . . . .
EX-N15 . . . . . . . . . . . . . . . . . . . . . . .
EX-Q . . . . . . . . . . . . . . . . . . . . . . . . .
EX-Q400 . . . . . . . . . . . . . . . . . . . . . .
EX-Q62 . . . . . . . . . . . . . . . . . . . . . . .
EX-Q800 . . . . . . . . . . . . . . . . . . . . . .
EX-XR3 . . . . . . . . . . . . . . . . . . . . . . .
EXA-AR . . . . . . . . . . . . . . . . . . . . . . .
EXA-AR20 . . . . . . . . . . . . . . . . . . . . .
EXA-AR62 . . . . . . . . . . . . . . . . . . . . .
EXA-N . . . . . . . . . . . . . . . . . . . . . . . .
EXA-Q . . . . . . . . . . . . . . . . . . . . . . . .
EXD-AR-3 . . . . . . . . . . . . . . . . . . . . .
EXD-AR30-3 . . . . . . . . . . . . . . . . . . .
EXD-Q-3 . . . . . . . . . . . . . . . . . . . . . .
EXH-AR3 . . . . . . . . . . . . . . . . . . . . . .
EXH-AR33 . . . . . . . . . . . . . . . . . . . . .
10
10
10
10
61
61
61
62
61
60
60
61
61
63
61
61
62
63
62
62
62
62
61
61
60
61
63
62
61
61
62
61
61
INDEX
EXH-AR7 . . . . . . . . . . . . . . . . . . . . . .
61
F
FR-01 . . . . . . . . . . . . . . . . . . . . . . . . .
FRL91-22CGA3-BB79 . . . . . . . . . . . .
FRL91-23CGG3-BB79 . . . . . . . . . . . .
FRL91-21CGG3-BB77 . . . . . . . . . . . .
FRL91-27CGG3-BB77 . . . . . . . . . . . .
FRN91-11BB . . . . . . . . . . . . . . . . . . .
FRN91-12BB . . . . . . . . . . . . . . . . . . .
FRN91-13BB . . . . . . . . . . . . . . . . . . .
FRN91-14BB . . . . . . . . . . . . . . . . . . .
FRN91-15BB . . . . . . . . . . . . . . . . . . .
FRN91-16BB . . . . . . . . . . . . . . . . . . .
FRN91-17BB . . . . . . . . . . . . . . . . . . .
FRN91-18BB . . . . . . . . . . . . . . . . . . .
FRN91-21BB . . . . . . . . . . . . . . . . . . .
FRN91-22BB . . . . . . . . . . . . . . . . . . .
FRN91-23BB . . . . . . . . . . . . . . . . . . .
FRN91-24BB . . . . . . . . . . . . . . . . . . .
FRN91-25BB . . . . . . . . . . . . . . . . . . .
FRN91-26BB . . . . . . . . . . . . . . . . . . .
FRN91-27BB . . . . . . . . . . . . . . . . . . .
FRN91-28BB . . . . . . . . . . . . . . . . . . .
160
160
160
160
160
159
159
159
159
159
159
159
159
159
159
159
159
159
159
159
159
G
GKBA10L7 . . . . . . . . . . . . . . . . . . . . .
GKBA14L6 . . . . . . . . . . . . . . . . . . . . .
GKBA14L7 . . . . . . . . . . . . . . . . . . . . .
GKBA16L6 . . . . . . . . . . . . . . . . . . . . .
GKBA16L7 . . . . . . . . . . . . . . . . . . . . .
GKBA1L7 . . . . . . . . . . . . . . . . . . . . . .
GKBA1L8-F11 . . . . . . . . . . . . . . . . . .
GKBA1LX . . . . . . . . . . . . . . . . . . . . .
GKBA2L6 . . . . . . . . . . . . . . . . . . . . . .
GKBA30LX . . . . . . . . . . . . . . . . . . . .
GKBA36LX . . . . . . . . . . . . . . . . . . . .
GKBA3L6 . . . . . . . . . . . . . . . . . . . . . .
GKBA3L7 . . . . . . . . . . . . . . . . . . . . . .
GKBA6LX . . . . . . . . . . . . . . . . . . . . .
GKBB14L6 . . . . . . . . . . . . . . . . . . . . .
GKBB3L7 . . . . . . . . . . . . . . . . . . . . . .
GKBB6L7 . . . . . . . . . . . . . . . . . . . . . .
GKBC14L7 . . . . . . . . . . . . . . . . . . . . .
GKBC1L6 . . . . . . . . . . . . . . . . . . . . . .
GKBC1L7 . . . . . . . . . . . . . . . . . . . . . .
GKBC1LX . . . . . . . . . . . . . . . . . . . . .
GKBC2LX . . . . . . . . . . . . . . . . . . . . .
GKBC30LX . . . . . . . . . . . . . . . . . . . .
GKBC36LX . . . . . . . . . . . . . . . . . . . .
GKBC6LX . . . . . . . . . . . . . . . . . . . . .
GKCA10L6 . . . . . . . . . . . . . . . . . . . . .
GKCA14L6 . . . . . . . . . . . . . . . . . . . . .
GKCA14L7 . . . . . . . . . . . . . . . . . . . . .
GKCA14L9 . . . . . . . . . . . . . . . . . . . . .
GKCA14M6 . . . . . . . . . . . . . . . . . . . .
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
GKCA14P6 . . . . . . . . . . . . . . . . . . . .
GKCA1L6 . . . . . . . . . . . . . . . . . . . . . .
GKCA1L7 . . . . . . . . . . . . . . . . . . . . . .
GKCA1LX . . . . . . . . . . . . . . . . . . . . .
GKCA1P7 . . . . . . . . . . . . . . . . . . . . .
GKCA30LX . . . . . . . . . . . . . . . . . . . .
GKCA36LX . . . . . . . . . . . . . . . . . . . .
GKCA6LX . . . . . . . . . . . . . . . . . . . . .
GKCC1LX . . . . . . . . . . . . . . . . . . . . .
GKCC30LX . . . . . . . . . . . . . . . . . . . .
GKCC36LX . . . . . . . . . . . . . . . . . . . .
GKCC6LX . . . . . . . . . . . . . . . . . . . . .
GKDA14L7 . . . . . . . . . . . . . . . . . . . . .
GKDA14P7 . . . . . . . . . . . . . . . . . . . .
GKEA1LX . . . . . . . . . . . . . . . . . . . . . .
GKEA3LX . . . . . . . . . . . . . . . . . . . . . .
GKEA6LX . . . . . . . . . . . . . . . . . . . . . .
GKEC1LX . . . . . . . . . . . . . . . . . . . . . .
GKEC3LX . . . . . . . . . . . . . . . . . . . . . .
GKEC6LX . . . . . . . . . . . . . . . . . . . . . .
GKLE36PXA2 . . . . . . . . . . . . . . . . . .
GKLE36PXA4 . . . . . . . . . . . . . . . . . .
GKLE36PXS2 . . . . . . . . . . . . . . . . . .
GKLE36PXS4 . . . . . . . . . . . . . . . . . .
GKLE3LXA2 . . . . . . . . . . . . . . . . . . . .
GKLE3PXA2 . . . . . . . . . . . . . . . . . . .
GKLE3PXA4 . . . . . . . . . . . . . . . . . . .
GKLE3PXS2 . . . . . . . . . . . . . . . . . . .
GKLE3PXS4 . . . . . . . . . . . . . . . . . . .
GKLE40LXA2 . . . . . . . . . . . . . . . . . . .
GKLE46LXA2 . . . . . . . . . . . . . . . . . . .
GKLG1PXA2 . . . . . . . . . . . . . . . . . . .
GKLG1PXA4 . . . . . . . . . . . . . . . . . . .
GKLG1PXS2 . . . . . . . . . . . . . . . . . . .
GKLG1PXS4 . . . . . . . . . . . . . . . . . . .
GKLG36PXA2 . . . . . . . . . . . . . . . . . .
GKLG36PXA4 . . . . . . . . . . . . . . . . . .
GKLG36PXS2 . . . . . . . . . . . . . . . . . .
GKLG36PXS4 . . . . . . . . . . . . . . . . . .
GKLG3PXS2 . . . . . . . . . . . . . . . . . . .
GKLG44PXB2 . . . . . . . . . . . . . . . . . .
GKM Series . . . . . . . . . . . . . . . . . . . .
GKMA17 . . . . . . . . . . . . . . . . . . . . . .
GKMA19 . . . . . . . . . . . . . . . . . . . . . .
GKMA23 . . . . . . . . . . . . . . . . . . . . . .
GKMA26 . . . . . . . . . . . . . . . . . . . . . .
GKMA27 . . . . . . . . . . . . . . . . . . . . . .
GKMA29 . . . . . . . . . . . . . . . . . . . . . .
GKMA33 . . . . . . . . . . . . . . . . . . . . . .
GKMA36 . . . . . . . . . . . . . . . . . . . . . .
GKMA37 . . . . . . . . . . . . . . . . . . . . . .
GKMA39 . . . . . . . . . . . . . . . . . . . . . .
GKMB13 . . . . . . . . . . . . . . . . . . . . . .
GKMB16 . . . . . . . . . . . . . . . . . . . . . .
GKMB17 . . . . . . . . . . . . . . . . . . . . . .
GKMB19 . . . . . . . . . . . . . . . . . . . . . .
88
88
88
88
88
88
88
88
88
88
88
88
88
88
94
94
94
94
94
94
91
91
91
91
90
91
91
91
91
90
90
91
91
91
91
91
91
91
91
91
91
82
83
83
83
83
83
83
83
83
83
83
83
83
83
83
www.honeywell.com/sensing
GKMB23 . . . . . . . . . . . . . . . . . . . . . .
GKMB26 . . . . . . . . . . . . . . . . . . . . . .
GKMB27 . . . . . . . . . . . . . . . . . . . . . .
GKMB29 . . . . . . . . . . . . . . . . . . . . . .
GKMB33 . . . . . . . . . . . . . . . . . . . . . .
GKMB36 . . . . . . . . . . . . . . . . . . . . . .
GKMB37 . . . . . . . . . . . . . . . . . . . . . .
GKMB39 . . . . . . . . . . . . . . . . . . . . . .
GKMC03 . . . . . . . . . . . . . . . . . . . . . .
GKMC06 . . . . . . . . . . . . . . . . . . . . . .
GKMC07 . . . . . . . . . . . . . . . . . . . . . .
GKMC09 . . . . . . . . . . . . . . . . . . . . . .
GKMD03 . . . . . . . . . . . . . . . . . . . . . .
GKMD07 . . . . . . . . . . . . . . . . . . . . . .
GKMD09 . . . . . . . . . . . . . . . . . . . . . .
GKMF03 . . . . . . . . . . . . . . . . . . . . . . .
GKMF06 . . . . . . . . . . . . . . . . . . . . . . .
GKMF07 . . . . . . . . . . . . . . . . . . . . . . .
GKMF09 . . . . . . . . . . . . . . . . . . . . . . .
GKNC12l . . . . . . . . . . . . . . . . . . . . . .
GKNC33L . . . . . . . . . . . . . . . . . . . . . .
GKNC4L . . . . . . . . . . . . . . . . . . . . . . .
GKNC6L . . . . . . . . . . . . . . . . . . . . . . .
GKRE36MXA2 . . . . . . . . . . . . . . . . . .
GKRE36MXA4 . . . . . . . . . . . . . . . . . .
GKRE36MXS2 . . . . . . . . . . . . . . . . . .
GKRE3MXA2 . . . . . . . . . . . . . . . . . . .
GKRE3MXA4 . . . . . . . . . . . . . . . . . . .
GKRE3MXS2 . . . . . . . . . . . . . . . . . . .
GKRE3MXS4 . . . . . . . . . . . . . . . . . . .
GKRE40LXA2 . . . . . . . . . . . . . . . . . .
GKRE46LXA2 . . . . . . . . . . . . . . . . . .
GKRG1MXA2 . . . . . . . . . . . . . . . . . . .
GKRG1MXA4 . . . . . . . . . . . . . . . . . . .
GKRG1MXS2 . . . . . . . . . . . . . . . . . . .
GKRG1MXS4 . . . . . . . . . . . . . . . . . . .
GKRG36MXA2 . . . . . . . . . . . . . . . . . .
GKRG36MXA4 . . . . . . . . . . . . . . . . . .
GKRG36MXS2 . . . . . . . . . . . . . . . . . .
GKRG36MXS4 . . . . . . . . . . . . . . . . . .
GKRG3MXA2 . . . . . . . . . . . . . . . . . . .
GKZ51M . . . . . . . . . . . . . . . . . . . . . .
GKZ52M . . . . . . . . . . . . . . . . . . . . . .
GKZ56 . . . . . . . . . . . . . . . . . . . . . . . .
GKZ57 . . . . . . . . . . . . . . . . . . . . . . . .
GKZ58 . . . . . . . . . . . . . . . . . . . . . . . .
GKZ59 . . . . . . . . . . . . . . . . . . . . . . . .
GKZ71 . . . . . . . . . . . . . . . . . . . . . . . .
GKZ72 . . . . . . . . . . . . . . . . . . . . . . . .
GKZ73 . . . . . . . . . . . . . . . . . . . . . . . .
GKZ74 . . . . . . . . . . . . . . . . . . . . . . . .
GLAA01A . . . . . . . . . . . . . . . . . . . . . .
GLAA01A1A . . . . . . . . . . . . . . . . . . .
GLAA01A1B . . . . . . . . . . . . . . . . . . .
GLAA01A2A . . . . . . . . . . . . . . . . . . .
GLAA01A2B . . . . . . . . . . . . . . . . . . .
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
97
97
97
97
91
91
91
91
91
91
91
90
90
91
91
91
91
91
91
91
91
91
83
83
92
92
92
92
92
92
92
92
15
15
15
15
15
205
INDEX
GLAA01A4J . . . . . . . . . . . . . . . . . . . .
GLAA01B . . . . . . . . . . . . . . . . . . . . . .
GLAA01C . . . . . . . . . . . . . . . . . . . . . .
GLAA01D . . . . . . . . . . . . . . . . . . . . . .
GLAA01E7B . . . . . . . . . . . . . . . . . . . .
GLAA01E7D . . . . . . . . . . . . . . . . . . . .
GLAA01K8B . . . . . . . . . . . . . . . . . . .
GLAA01K8C . . . . . . . . . . . . . . . . . . .
GLAA20A . . . . . . . . . . . . . . . . . . . . . .
GLAA20A1A . . . . . . . . . . . . . . . . . . .
GLAA20A1B . . . . . . . . . . . . . . . . . . .
GLAA20A2A . . . . . . . . . . . . . . . . . . .
GLAA20A2B . . . . . . . . . . . . . . . . . . .
GLAA20A4J . . . . . . . . . . . . . . . . . . . .
GLAA20B . . . . . . . . . . . . . . . . . . . . . .
GLAA20C . . . . . . . . . . . . . . . . . . . . . .
GLAA20D . . . . . . . . . . . . . . . . . . . . . .
GLAA20K8C . . . . . . . . . . . . . . . . . . .
GLAB01A . . . . . . . . . . . . . . . . . . . . . .
GLAB01A1A . . . . . . . . . . . . . . . . . . .
GLAB01A1B . . . . . . . . . . . . . . . . . . .
GLAB01A2A . . . . . . . . . . . . . . . . . . .
GLAB01A2B . . . . . . . . . . . . . . . . . . .
GLAB01A4J . . . . . . . . . . . . . . . . . . . .
GLAB01B . . . . . . . . . . . . . . . . . . . . . .
GLAB01C . . . . . . . . . . . . . . . . . . . . . .
GLAB01D . . . . . . . . . . . . . . . . . . . . . .
GLAB01E7B . . . . . . . . . . . . . . . . . . . .
GLAB01K8B . . . . . . . . . . . . . . . . . . .
GLAB01K8C . . . . . . . . . . . . . . . . . . .
GLAB20A1A . . . . . . . . . . . . . . . . . . .
GLAB20A1B . . . . . . . . . . . . . . . . . . .
GLAB20A2A . . . . . . . . . . . . . . . . . . .
GLAB20A2B . . . . . . . . . . . . . . . . . . .
GLAB20A4J . . . . . . . . . . . . . . . . . . . .
GLAB20B . . . . . . . . . . . . . . . . . . . . . .
GLAB20C . . . . . . . . . . . . . . . . . . . . . .
GLAB20D . . . . . . . . . . . . . . . . . . . . . .
GLAB20E7B . . . . . . . . . . . . . . . . . . . .
GLAC01A1A . . . . . . . . . . . . . . . . . . .
GLAC01A1B . . . . . . . . . . . . . . . . . . .
GLAC01A2A . . . . . . . . . . . . . . . . . . .
GLAC01A2B . . . . . . . . . . . . . . . . . . .
GLAC01A4J . . . . . . . . . . . . . . . . . . . .
GLAC01B . . . . . . . . . . . . . . . . . . . . . .
GLAC01C . . . . . . . . . . . . . . . . . . . . . .
GLAC01D . . . . . . . . . . . . . . . . . . . . . .
GLAC01E7B . . . . . . . . . . . . . . . . . . . .
GLAC20A1A . . . . . . . . . . . . . . . . . . .
GLAC20A1B . . . . . . . . . . . . . . . . . . .
GLAC20A2B . . . . . . . . . . . . . . . . . . .
GLAC20B . . . . . . . . . . . . . . . . . . . . . .
GLAC20C . . . . . . . . . . . . . . . . . . . . . .
GLAC20D . . . . . . . . . . . . . . . . . . . . . .
GLAC20E7B . . . . . . . . . . . . . . . . . . . .
GLCA01A1A . . . . . . . . . . . . . . . . . . .
206
15
15
15
15
16
16
16
16
15
15
15
15
15
15
15
15
15
16
15
15
15
15
15
15
15
15
15
16
16
16
15
15
15
15
15
15
15
15
16
15
15
15
15
15
15
15
15
16
15
15
15
15
15
15
16
16
GLCA01A1B . . . . . . . . . . . . . . . . . . .
GLCA01A2A . . . . . . . . . . . . . . . . . . .
GLCA01A2B . . . . . . . . . . . . . . . . . . .
GLCA01A4J . . . . . . . . . . . . . . . . . . . .
GLCA01B . . . . . . . . . . . . . . . . . . . . . .
GLCA01C . . . . . . . . . . . . . . . . . . . . . .
GLCA01D . . . . . . . . . . . . . . . . . . . . . .
GLCA01E7B . . . . . . . . . . . . . . . . . . . .
GLCA01K8A . . . . . . . . . . . . . . . . . . .
GLCB01A1A . . . . . . . . . . . . . . . . . . .
GLCB01A1B . . . . . . . . . . . . . . . . . . .
GLCB01A2A . . . . . . . . . . . . . . . . . . .
GLCB01A2B . . . . . . . . . . . . . . . . . . .
GLCB01A4J . . . . . . . . . . . . . . . . . . . .
GLCB01B . . . . . . . . . . . . . . . . . . . . . .
GLCB01C . . . . . . . . . . . . . . . . . . . . . .
GLCB01D . . . . . . . . . . . . . . . . . . . . . .
GLCB01E7B . . . . . . . . . . . . . . . . . . . .
GLCB01K8A . . . . . . . . . . . . . . . . . . .
GLCC01A1B . . . . . . . . . . . . . . . . . . .
GLCC01A2B . . . . . . . . . . . . . . . . . . .
GLCC01B . . . . . . . . . . . . . . . . . . . . . .
GLCC01C . . . . . . . . . . . . . . . . . . . . . .
GLCC01D . . . . . . . . . . . . . . . . . . . . . .
GLCC01E7B . . . . . . . . . . . . . . . . . . . .
GLDA01A1A . . . . . . . . . . . . . . . . . . .
GLDA01A1B . . . . . . . . . . . . . . . . . . .
GLDA01A2A . . . . . . . . . . . . . . . . . . .
GLDA01A2B . . . . . . . . . . . . . . . . . . .
GLDA01A4J . . . . . . . . . . . . . . . . . . . .
GLDA01B . . . . . . . . . . . . . . . . . . . . . .
GLDA01C . . . . . . . . . . . . . . . . . . . . . .
GLDA01D . . . . . . . . . . . . . . . . . . . . . .
GLDA01E7B . . . . . . . . . . . . . . . . . . . .
GLDB01A1A . . . . . . . . . . . . . . . . . . .
GLDB01A1B . . . . . . . . . . . . . . . . . . .
GLDB01A2A . . . . . . . . . . . . . . . . . . .
GLDB01A2B . . . . . . . . . . . . . . . . . . .
GLDB01A4J . . . . . . . . . . . . . . . . . . . .
GLDB01B . . . . . . . . . . . . . . . . . . . . . .
GLDB01C . . . . . . . . . . . . . . . . . . . . . .
GLDB01D . . . . . . . . . . . . . . . . . . . . . .
GLDB01E7B . . . . . . . . . . . . . . . . . . . .
GLDC01A1B . . . . . . . . . . . . . . . . . . .
GLDC01A2B . . . . . . . . . . . . . . . . . . .
GLDC01B . . . . . . . . . . . . . . . . . . . . . .
GLDC01C . . . . . . . . . . . . . . . . . . . . . .
GLDC01D . . . . . . . . . . . . . . . . . . . . . .
GLDC01E7B . . . . . . . . . . . . . . . . . . . .
GLEA01A1A . . . . . . . . . . . . . . . . . . . .
GLEA01A1B . . . . . . . . . . . . . . . . . . . .
GLEA01A2A . . . . . . . . . . . . . . . . . . . .
GLEA01A2B . . . . . . . . . . . . . . . . . . . .
GLEA01A5A . . . . . . . . . . . . . . . . . . . .
GLEA01B . . . . . . . . . . . . . . . . . . . . . .
GLEA01C . . . . . . . . . . . . . . . . . . . . . .
16
17
17
17
17
17
17
17
17
16
16
17
17
17
17
17
17
17
17
16
17
17
17
17
17
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
19
19
19
19
19
www.honeywell.com/sensing
GLEA01D . . . . . . . . . . . . . . . . . . . . . .
GLEA01E7B . . . . . . . . . . . . . . . . . . . .
GLEA24A1B . . . . . . . . . . . . . . . . . . . .
GLEA24A2A . . . . . . . . . . . . . . . . . . . .
GLEA24B . . . . . . . . . . . . . . . . . . . . . .
GLEA24C . . . . . . . . . . . . . . . . . . . . . .
GLEA24D . . . . . . . . . . . . . . . . . . . . . .
GLEA24E7B . . . . . . . . . . . . . . . . . . . .
GLEB01A1A . . . . . . . . . . . . . . . . . . . .
GLEB01A1B . . . . . . . . . . . . . . . . . . . .
GLEB01A2A . . . . . . . . . . . . . . . . . . . .
GLEB01A2B . . . . . . . . . . . . . . . . . . . .
GLEB01A4J . . . . . . . . . . . . . . . . . . . .
GLEB01A5A . . . . . . . . . . . . . . . . . . . .
GLEB01B . . . . . . . . . . . . . . . . . . . . . .
GLEB01C . . . . . . . . . . . . . . . . . . . . . .
GLEB01D . . . . . . . . . . . . . . . . . . . . . .
GLEB01E7B . . . . . . . . . . . . . . . . . . . .
GLEB24A1A . . . . . . . . . . . . . . . . . . . .
GLEB24A1B . . . . . . . . . . . . . . . . . . . .
GLEB24A2B . . . . . . . . . . . . . . . . . . . .
GLEB24A4J . . . . . . . . . . . . . . . . . . . .
GLEB24B . . . . . . . . . . . . . . . . . . . . . .
GLEB24C . . . . . . . . . . . . . . . . . . . . . .
GLEB24D . . . . . . . . . . . . . . . . . . . . . .
GLEB24E7B . . . . . . . . . . . . . . . . . . . .
GLEC01A1B . . . . . . . . . . . . . . . . . . . .
GLEC01D . . . . . . . . . . . . . . . . . . . . . .
GLEC24C . . . . . . . . . . . . . . . . . . . . . .
GLEC24D . . . . . . . . . . . . . . . . . . . . . .
GLL EN 50047 . . . . . . . . . . . . . . . . . .
GLZ51A . . . . . . . . . . . . . . . . . . . . . . .
GLZ51B . . . . . . . . . . . . . . . . . . . . . . .
GLZ52A . . . . . . . . . . . . . . . . . . . . . . .
GLZ52B . . . . . . . . . . . . . . . . . . . . . . .
GLZ54J . . . . . . . . . . . . . . . . . . . . . . .
GLZ55B . . . . . . . . . . . . . . . . . . . . . . .
GSCA01S1 . . . . . . . . . . . . . . . . . . . .
GSCA01S2 . . . . . . . . . . . . . . . . . . . .
GSCA01S3 . . . . . . . . . . . . . . . . . . . .
GSCA03S1 . . . . . . . . . . . . . . . . . . . .
GSCA03S2 . . . . . . . . . . . . . . . . . . . .
GSCA03S3 . . . . . . . . . . . . . . . . . . . .
GSCA06S1 . . . . . . . . . . . . . . . . . . . .
GSCA06S2 . . . . . . . . . . . . . . . . . . . .
GSCA06S3 . . . . . . . . . . . . . . . . . . . .
GSCB36S2 . . . . . . . . . . . . . . . . . . . .
GSCB36S3 . . . . . . . . . . . . . . . . . . . .
GSCC36S1 . . . . . . . . . . . . . . . . . . . .
GSDA03S1 . . . . . . . . . . . . . . . . . . . .
GSDA03S2 . . . . . . . . . . . . . . . . . . . .
GSDA03S3 . . . . . . . . . . . . . . . . . . . .
GSDA06S1 . . . . . . . . . . . . . . . . . . . .
GSDA06S2 . . . . . . . . . . . . . . . . . . . .
GSDA06S3 . . . . . . . . . . . . . . . . . . . .
GSDB03S1 . . . . . . . . . . . . . . . . . . . .
19
19
18
19
19
19
19
19
18
18
19
19
19
19
19
19
19
19
18
18
19
19
19
19
19
19
18
19
19
19
20
72
72
72
72
72
72
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
INDEX
GSDB03S2 . . . . . . . . . . . . . . . . . . . . 85
GSDB03S3 . . . . . . . . . . . . . . . . . . . . 85
GSDB06S1 . . . . . . . . . . . . . . . . . . . . 85
GSDB06S2 . . . . . . . . . . . . . . . . . . . . 85
GSDB06S3 . . . . . . . . . . . . . . . . . . . . 85
GSDC01S1 . . . . . . . . . . . . . . . . . . . . 85
GSDC01S2 . . . . . . . . . . . . . . . . . . . . 85
GSDC01S3 . . . . . . . . . . . . . . . . . . . . 85
GSEA44S1 . . . . . . . . . . . . . . . . . . . . . 86
GSEA44S2 . . . . . . . . . . . . . . . . . . . . . 86
GSEA44S3 . . . . . . . . . . . . . . . . . . . . . 86
GSEA46S1 . . . . . . . . . . . . . . . . . . . . . 86
GSEC41S1 . . . . . . . . . . . . . . . . . . . . . 86
GSS Series . . . . . . . . . . . . . . . . . . . . 84
GXE Series . . . . . . . . . . . . . . . . . . . . . 59
GXE51A1B . . . . . . . . . . . . . . . . . . . . . 59
GXE51B . . . . . . . . . . . . . . . . . . . . . . . 59
GXE51C . . . . . . . . . . . . . . . . . . . . . . . 59
H
HRSR-01 . . . . . . . . . . . . . . . . . . . . .
162
J
JE-1 . . . . . . . . . . . . . . . . . . . . . . . . . 123
JE-4 . . . . . . . . . . . . . . . . . . . . . . . . . 123
JE-5 . . . . . . . . . . . . . . . . . . . . . . . . . 123
JM-1 . . . . . . . . . . . . . . . . . . . . . . . . 125
JM-5 . . . . . . . . . . . . . . . . . . . . . . . . 125
JS-151 . . . . . . . . . . . . . . . . . . . . . . . 127
JS-254 . . . . . . . . . . . . . . . . . . . . . . . 127
L
Levers . . . . . . . . . . . . . . . . . . . . . . . .
LS2A4K . . . . . . . . . . . . . . . . . . . . . . .
LS2A4L . . . . . . . . . . . . . . . . . . . . . . .
LS2D4K . . . . . . . . . . . . . . . . . . . . . . .
LS2D4L . . . . . . . . . . . . . . . . . . . . . . .
LS2E4K . . . . . . . . . . . . . . . . . . . . . . .
LS2E4L . . . . . . . . . . . . . . . . . . . . . . .
LS2F4K . . . . . . . . . . . . . . . . . . . . . . .
LS2F4L . . . . . . . . . . . . . . . . . . . . . . .
LS2H4K . . . . . . . . . . . . . . . . . . . . . . .
LS2H4L . . . . . . . . . . . . . . . . . . . . . . .
LS2M4N . . . . . . . . . . . . . . . . . . . . . .
LS2Z51A . . . . . . . . . . . . . . . . . . . . . .
LS2Z51B . . . . . . . . . . . . . . . . . . . . . .
LS2Z52A . . . . . . . . . . . . . . . . . . . . . .
LS2Z52B . . . . . . . . . . . . . . . . . . . . . .
LS2Z54N . . . . . . . . . . . . . . . . . . . . . .
LS4A1A . . . . . . . . . . . . . . . . . . . . . . .
LS4A2B . . . . . . . . . . . . . . . . . . . . . . .
LS4A3K . . . . . . . . . . . . . . . . . . . . . . .
LS4M2D . . . . . . . . . . . . . . . . . . . . . .
LSA1A . . . . . . . . . . . . . . . . . . . . . . . .
LSA1E . . . . . . . . . . . . . . . . . . . . . . . .
LSA2B . . . . . . . . . . . . . . . . . . . . . . . .
71
55
55
55
55
55
55
55
55
55
55
55
73
73
73
73
73
49
49
49
49
49
49
49
LSA3K . . . . . . . . . . . . . . . . . . . . . . . .
LSA4L . . . . . . . . . . . . . . . . . . . . . . . .
LSA6B . . . . . . . . . . . . . . . . . . . . . . . .
LSA6S . . . . . . . . . . . . . . . . . . . . . . . .
LSC1A . . . . . . . . . . . . . . . . . . . . . . . .
LSC1E . . . . . . . . . . . . . . . . . . . . . . . .
LSC3K . . . . . . . . . . . . . . . . . . . . . . . .
LSC6B . . . . . . . . . . . . . . . . . . . . . . . .
LSC6S . . . . . . . . . . . . . . . . . . . . . . . .
LSC7L . . . . . . . . . . . . . . . . . . . . . . . .
LSD1A . . . . . . . . . . . . . . . . . . . . . . . .
LSD1E . . . . . . . . . . . . . . . . . . . . . . . .
LSD3K . . . . . . . . . . . . . . . . . . . . . . . .
LSD6B . . . . . . . . . . . . . . . . . . . . . . . .
LSD6S . . . . . . . . . . . . . . . . . . . . . . . .
LSD7L . . . . . . . . . . . . . . . . . . . . . . . .
LSE1A . . . . . . . . . . . . . . . . . . . . . . . .
LSE1E . . . . . . . . . . . . . . . . . . . . . . . .
LSE3K . . . . . . . . . . . . . . . . . . . . . . . .
LSE6B . . . . . . . . . . . . . . . . . . . . . . . .
LSE6S . . . . . . . . . . . . . . . . . . . . . . . .
LSE7L . . . . . . . . . . . . . . . . . . . . . . . .
LSF1A . . . . . . . . . . . . . . . . . . . . . . . .
LSF1E . . . . . . . . . . . . . . . . . . . . . . . .
LSF3K . . . . . . . . . . . . . . . . . . . . . . . .
LSF6B . . . . . . . . . . . . . . . . . . . . . . . .
LSF6S . . . . . . . . . . . . . . . . . . . . . . . .
LSF7L . . . . . . . . . . . . . . . . . . . . . . . .
LSG1A . . . . . . . . . . . . . . . . . . . . . . . .
LSG1E . . . . . . . . . . . . . . . . . . . . . . . .
LSG3K . . . . . . . . . . . . . . . . . . . . . . . .
LSG6B . . . . . . . . . . . . . . . . . . . . . . . .
LSG6S . . . . . . . . . . . . . . . . . . . . . . . .
LSG7L . . . . . . . . . . . . . . . . . . . . . . . .
LSH1A . . . . . . . . . . . . . . . . . . . . . . . .
LSH1E . . . . . . . . . . . . . . . . . . . . . . . .
LSH2B . . . . . . . . . . . . . . . . . . . . . . . .
LSH3K . . . . . . . . . . . . . . . . . . . . . . . .
LSH4L . . . . . . . . . . . . . . . . . . . . . . . .
LSH6B . . . . . . . . . . . . . . . . . . . . . . . .
LSH6S . . . . . . . . . . . . . . . . . . . . . . . .
LSJ1A-7A . . . . . . . . . . . . . . . . . . . . .
LSJ1A-7M . . . . . . . . . . . . . . . . . . . . .
LSJ1A-7N . . . . . . . . . . . . . . . . . . . . .
LSJ3K-7A . . . . . . . . . . . . . . . . . . . . .
LSJ3K-7M . . . . . . . . . . . . . . . . . . . . .
LSJ3K-7N . . . . . . . . . . . . . . . . . . . . .
LSJ6B-7A . . . . . . . . . . . . . . . . . . . . .
LSJ6B-7M . . . . . . . . . . . . . . . . . . . . .
LSJ6B-7N . . . . . . . . . . . . . . . . . . . . .
LSJ7L-7A . . . . . . . . . . . . . . . . . . . . .
LSJ7L-7M . . . . . . . . . . . . . . . . . . . . .
LSJ7L-7N . . . . . . . . . . . . . . . . . . . . .
LSK1A-8A . . . . . . . . . . . . . . . . . . . . .
LSK1A-8C . . . . . . . . . . . . . . . . . . . . .
LSK3K-8A . . . . . . . . . . . . . . . . . . . . .
49
49
49
49
50
50
50
50
50
50
50
50
50
50
50
50
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
49
49
49
49
49
49
49
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
www.honeywell.com/sensing
LSK3K-8C . . . . . . . . . . . . . . . . . . . . .
LSK6B-8A . . . . . . . . . . . . . . . . . . . . .
LSK6B-8C . . . . . . . . . . . . . . . . . . . . .
LSK7L-8A . . . . . . . . . . . . . . . . . . . . .
LSK7L-8C . . . . . . . . . . . . . . . . . . . . .
LSL2C . . . . . . . . . . . . . . . . . . . . . . . .
LSL4M . . . . . . . . . . . . . . . . . . . . . . . .
LSL6C . . . . . . . . . . . . . . . . . . . . . . . .
LSL7M . . . . . . . . . . . . . . . . . . . . . . . .
LSM2D . . . . . . . . . . . . . . . . . . . . . . .
LSM4N . . . . . . . . . . . . . . . . . . . . . . .
LSM6D . . . . . . . . . . . . . . . . . . . . . . .
LSM7N . . . . . . . . . . . . . . . . . . . . . . .
LSN1A . . . . . . . . . . . . . . . . . . . . . . . .
LSN3K . . . . . . . . . . . . . . . . . . . . . . . .
LSN6B . . . . . . . . . . . . . . . . . . . . . . . .
LSN7L . . . . . . . . . . . . . . . . . . . . . . . .
LSP1A . . . . . . . . . . . . . . . . . . . . . . . .
LSP1E . . . . . . . . . . . . . . . . . . . . . . . .
LSP2B . . . . . . . . . . . . . . . . . . . . . . . .
LSP3K . . . . . . . . . . . . . . . . . . . . . . . .
LSP4L . . . . . . . . . . . . . . . . . . . . . . . .
LSP6B . . . . . . . . . . . . . . . . . . . . . . . .
LSP6S . . . . . . . . . . . . . . . . . . . . . . . .
LSR1A . . . . . . . . . . . . . . . . . . . . . . . .
LSR1E . . . . . . . . . . . . . . . . . . . . . . . .
LSR2B . . . . . . . . . . . . . . . . . . . . . . . .
LSR3K . . . . . . . . . . . . . . . . . . . . . . . .
LSR4L . . . . . . . . . . . . . . . . . . . . . . . .
LSR6B . . . . . . . . . . . . . . . . . . . . . . . .
LSR6S . . . . . . . . . . . . . . . . . . . . . . . .
LSU1A . . . . . . . . . . . . . . . . . . . . . . . .
LSU1E . . . . . . . . . . . . . . . . . . . . . . . .
LSU2B . . . . . . . . . . . . . . . . . . . . . . . .
LSU3K . . . . . . . . . . . . . . . . . . . . . . . .
LSU4L . . . . . . . . . . . . . . . . . . . . . . . .
LSU6B . . . . . . . . . . . . . . . . . . . . . . . .
LSU6S . . . . . . . . . . . . . . . . . . . . . . . .
LSV1A . . . . . . . . . . . . . . . . . . . . . . . .
LSV1E . . . . . . . . . . . . . . . . . . . . . . . .
LSV3K . . . . . . . . . . . . . . . . . . . . . . . .
LSV6B . . . . . . . . . . . . . . . . . . . . . . . .
LSV6S . . . . . . . . . . . . . . . . . . . . . . . .
LSV7L . . . . . . . . . . . . . . . . . . . . . . . .
LSW1A . . . . . . . . . . . . . . . . . . . . . . .
LSW1E . . . . . . . . . . . . . . . . . . . . . . .
LSW3K . . . . . . . . . . . . . . . . . . . . . . .
LSW6B . . . . . . . . . . . . . . . . . . . . . . .
LSW6S . . . . . . . . . . . . . . . . . . . . . . .
LSW7L . . . . . . . . . . . . . . . . . . . . . . .
LSX4A3K . . . . . . . . . . . . . . . . . . . . . .
LSX4A4L . . . . . . . . . . . . . . . . . . . . . .
LSX4C3K . . . . . . . . . . . . . . . . . . . . . .
LSX4D3K . . . . . . . . . . . . . . . . . . . . . .
LSX4M4N . . . . . . . . . . . . . . . . . . . . .
LSXA3E . . . . . . . . . . . . . . . . . . . . . . .
52
52
52
52
52
49
49
49
49
49
49
49
49
50
50
50
50
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
50
50
50
50
50
50
51
51
51
51
51
51
67
67
68
68
67
67
207
INDEX
LSXA3K . . . . . . . . . . . . . . . . . . . . . . .
LSXA4K . . . . . . . . . . . . . . . . . . . . . . .
LSXA4L . . . . . . . . . . . . . . . . . . . . . . .
LSXA7L . . . . . . . . . . . . . . . . . . . . . . .
LSXB3K . . . . . . . . . . . . . . . . . . . . . . .
LSXB4L . . . . . . . . . . . . . . . . . . . . . . .
LSXC3K . . . . . . . . . . . . . . . . . . . . . . .
LSXC4L . . . . . . . . . . . . . . . . . . . . . . .
LSXD3K . . . . . . . . . . . . . . . . . . . . . . .
LSXD4L . . . . . . . . . . . . . . . . . . . . . . .
LSXE3K . . . . . . . . . . . . . . . . . . . . . . .
LSXE4L . . . . . . . . . . . . . . . . . . . . . . .
LSXF3K . . . . . . . . . . . . . . . . . . . . . . .
LSXH3K . . . . . . . . . . . . . . . . . . . . . . .
LSXH4L . . . . . . . . . . . . . . . . . . . . . . .
LSXJ3K-7A . . . . . . . . . . . . . . . . . . . .
LSXJ4L-7A . . . . . . . . . . . . . . . . . . . .
LSXK3K-8A . . . . . . . . . . . . . . . . . . . .
LSXM4N . . . . . . . . . . . . . . . . . . . . . .
LSXN3K . . . . . . . . . . . . . . . . . . . . . . .
LSXN4L . . . . . . . . . . . . . . . . . . . . . . .
LSXN7L . . . . . . . . . . . . . . . . . . . . . . .
LSXP3K . . . . . . . . . . . . . . . . . . . . . . .
LSXR3K . . . . . . . . . . . . . . . . . . . . . . .
LSXR4L . . . . . . . . . . . . . . . . . . . . . . .
LSXV3K . . . . . . . . . . . . . . . . . . . . . . .
LSY*C3KP-**FP . . . . . . . . . . . . . . . .
LSY*C3KQ-**FP . . . . . . . . . . . . . . . .
LSY*C4LX-**FP . . . . . . . . . . . . . . . .
LSY*C7LR-**FP . . . . . . . . . . . . . . . .
LSYAC3KP-FP . . . . . . . . . . . . . . . . . .
LSYAC3KQ-FP . . . . . . . . . . . . . . . . . .
LSYAC4LX-FP . . . . . . . . . . . . . . . . . .
LSYAC7LR-FP . . . . . . . . . . . . . . . . . .
LSYCC3KP-FP . . . . . . . . . . . . . . . . . .
LSYCC3KQ-FP . . . . . . . . . . . . . . . . . .
LSYCC4LX-FP . . . . . . . . . . . . . . . . . .
LSYCC7LR-FP . . . . . . . . . . . . . . . . . .
LSYDC3KP-FP . . . . . . . . . . . . . . . . . .
LSYDC3KQ-FP . . . . . . . . . . . . . . . . . .
LSYDC4LX-FP . . . . . . . . . . . . . . . . . .
LSYDC7LR-FP . . . . . . . . . . . . . . . . . .
LSYEC3KP-FP . . . . . . . . . . . . . . . . . .
LSYEC3KQ-FP . . . . . . . . . . . . . . . . . .
LSYEC4LX-FP . . . . . . . . . . . . . . . . . .
LSYEC7LR-FP . . . . . . . . . . . . . . . . . .
LSYLC4MX-FP . . . . . . . . . . . . . . . . .
LSYLC7MR-FP . . . . . . . . . . . . . . . . .
LSYMC4NX-FP . . . . . . . . . . . . . . . . .
LSYMC7NR-FP . . . . . . . . . . . . . . . . .
LSYPC3KP-FP . . . . . . . . . . . . . . . . . .
LSYPC3KQ-FP . . . . . . . . . . . . . . . . . .
LSYPC4LX-FP . . . . . . . . . . . . . . . . . .
LSYPC7LR-FP . . . . . . . . . . . . . . . . . .
LSYUC3KP-FP . . . . . . . . . . . . . . . . . .
LSYUC3KQ-FP . . . . . . . . . . . . . . . . . .
208
67
67
67
67
67
67
68
68
68
68
69
69
69
67
67
69
69
69
67
67
67
67
67
67
67
68
54
54
54
54
53
53
53
53
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
53
53
53
53
53
53
LSZ51 . . . . . . . . . . . . . . . . . . . . . . . .
LSZ51A . . . . . . . . . . . . . . . . . . . . . . .
LSZ51B . . . . . . . . . . . . . . . . . . . . . . .
LSZ51C . . . . . . . . . . . . . . . . . . . . . . .
LSZ51D . . . . . . . . . . . . . . . . . . . . . . .
LSZ51W . . . . . . . . . . . . . . . . . . . . . .
LSZ51Y . . . . . . . . . . . . . . . . . . . . . . .
LSZ52 . . . . . . . . . . . . . . . . . . . . . . . .
LSZ52A . . . . . . . . . . . . . . . . . . . . . . .
LSZ52B . . . . . . . . . . . . . . . . . . . . . . .
LSZ52C . . . . . . . . . . . . . . . . . . . . . . .
LSZ52D . . . . . . . . . . . . . . . . . . . . . . .
LSZ52J . . . . . . . . . . . . . . . . . . . . . . .
LSZ52K . . . . . . . . . . . . . . . . . . . . . . .
LSZ52M . . . . . . . . . . . . . . . . . . . . . . .
LSZ52N . . . . . . . . . . . . . . . . . . . . . . .
LSZ52W . . . . . . . . . . . . . . . . . . . . . .
LSZ52Y . . . . . . . . . . . . . . . . . . . . . . .
LSZ53A . . . . . . . . . . . . . . . . . . . . . . .
LSZ53B . . . . . . . . . . . . . . . . . . . . . . .
LSZ53D . . . . . . . . . . . . . . . . . . . . . . .
LSZ53E . . . . . . . . . . . . . . . . . . . . . . .
LSZ53P . . . . . . . . . . . . . . . . . . . . . . .
LSZ53S . . . . . . . . . . . . . . . . . . . . . . .
LSZ53U . . . . . . . . . . . . . . . . . . . . . . .
LSZ54 . . . . . . . . . . . . . . . . . . . . . . . .
LSZ54M . . . . . . . . . . . . . . . . . . . . . . .
LSZ54N . . . . . . . . . . . . . . . . . . . . . . .
LSZ54R . . . . . . . . . . . . . . . . . . . . . . .
LSZ54V . . . . . . . . . . . . . . . . . . . . . . .
LSZ55 . . . . . . . . . . . . . . . . . . . . . . . .
LSZ55A . . . . . . . . . . . . . . . . . . . . . . .
LSZ55B . . . . . . . . . . . . . . . . . . . . . . .
LSZ55C . . . . . . . . . . . . . . . . . . . . . . .
LSZ55D . . . . . . . . . . . . . . . . . . . . . . .
LSZ55W . . . . . . . . . . . . . . . . . . . . . .
LSZ55Y . . . . . . . . . . . . . . . . . . . . . . .
LSZ61 . . . . . . . . . . . . . . . . . . . . . . . .
LSZ67AA . . . . . . . . . . . . . . . . . . . . . .
LSZ68 . . . . . . . . . . . . . . . . . . . . . . . .
72
72
72
72
72
73
73
72
72
72
72
72
72
72
72
72
73
73
72
72
72
72
72
72
72
72
72
72
72
72
72
72
72
72
72
73
73
73
73
72
M
MR93-12BBN . . . . . . . . . . . . . . . . . .
MR93-121BK . . . . . . . . . . . . . . . . . . .
MR93-122B3 . . . . . . . . . . . . . . . . . . .
MR93-122BJ . . . . . . . . . . . . . . . . . . .
MR93-124B3 . . . . . . . . . . . . . . . . . . .
MR93-22BBN . . . . . . . . . . . . . . . . . .
MR93-221B4 . . . . . . . . . . . . . . . . . . .
MR93-222B3 . . . . . . . . . . . . . . . . . . .
MR93-224B3 . . . . . . . . . . . . . . . . . . .
MRS93-11BB . . . . . . . . . . . . . . . . . .
MRS93-12BB . . . . . . . . . . . . . . . . . .
MRS93-13BB . . . . . . . . . . . . . . . . . .
MRS93-14BB . . . . . . . . . . . . . . . . . .
MRS93-15BB . . . . . . . . . . . . . . . . . .
163
163
163
163
163
163
163
163
163
164
164
164
164
164
www.honeywell.com/sensing
MRS93-16BB . . . . . . . . . . . . . . . . . . 164
MRS93-17BB . . . . . . . . . . . . . . . . . . 164
MRS93-18BB . . . . . . . . . . . . . . . . . . 164
P
Precision Aerospace . . . . . . . . . . . . . 195
S
SL1-A . . . . . . . . . . . . . . . . . . . . . . . .
SL1-AK . . . . . . . . . . . . . . . . . . . . . . .
SL1-B . . . . . . . . . . . . . . . . . . . . . . . .
SL1-BK . . . . . . . . . . . . . . . . . . . . . . .
SL1-D . . . . . . . . . . . . . . . . . . . . . . . .
SL1-DK . . . . . . . . . . . . . . . . . . . . . . .
SL1-E . . . . . . . . . . . . . . . . . . . . . . . .
SL1-EK . . . . . . . . . . . . . . . . . . . . . . .
SL1-H . . . . . . . . . . . . . . . . . . . . . . . .
SL1-HK . . . . . . . . . . . . . . . . . . . . . . .
SL1-K . . . . . . . . . . . . . . . . . . . . . . . .
SL1-KK . . . . . . . . . . . . . . . . . . . . . . .
SL1-P . . . . . . . . . . . . . . . . . . . . . . . .
SL1-PK . . . . . . . . . . . . . . . . . . . . . . .
SR-01 . . . . . . . . . . . . . . . . . . . . . . . .
SRL91-22ARN3-BB9N . . . . . . . . . . . .
SRL91-21URR3-BB99 . . . . . . . . . . . .
SRL91-21UGG3-BB99 . . . . . . . . . . . .
SRL91-22UGA3-BB99 . . . . . . . . . . . .
SRL91-22UGG3-BB99 . . . . . . . . . . . .
SRL91-23UGG3-BB99 . . . . . . . . . . . .
SRL91-23URR3-BB99 . . . . . . . . . . . .
SRL91-27URR3-BB99 . . . . . . . . . . . .
SRN91-11BB . . . . . . . . . . . . . . . . . . .
SRN91-12BB . . . . . . . . . . . . . . . . . . .
SRN91-13BB . . . . . . . . . . . . . . . . . . .
SRN91-14BB . . . . . . . . . . . . . . . . . . .
SRN91-15BB . . . . . . . . . . . . . . . . . . .
SRN91-16BB . . . . . . . . . . . . . . . . . . .
SRN91-17BB . . . . . . . . . . . . . . . . . . .
SRN91-18BB . . . . . . . . . . . . . . . . . . .
SRN91-21BB . . . . . . . . . . . . . . . . . . .
SRN91-22BB . . . . . . . . . . . . . . . . . . .
SRN91-23BB . . . . . . . . . . . . . . . . . . .
SRN91-24BB . . . . . . . . . . . . . . . . . . .
SRN91-25BB . . . . . . . . . . . . . . . . . . .
SRN91-26BB . . . . . . . . . . . . . . . . . . .
SRN91-27BB . . . . . . . . . . . . . . . . . . .
SRN91-28BB . . . . . . . . . . . . . . . . . . .
SZL-VL-A . . . . . . . . . . . . . . . . . . . . .
SZL-VL-B . . . . . . . . . . . . . . . . . . . . .
SZL-VL-C . . . . . . . . . . . . . . . . . . . . .
SZL-VL-D . . . . . . . . . . . . . . . . . . . . .
SZL-VL-E . . . . . . . . . . . . . . . . . . . . . .
SZL-VL-F . . . . . . . . . . . . . . . . . . . . . .
SZL-VL-G . . . . . . . . . . . . . . . . . . . . .
SZL-VL-H . . . . . . . . . . . . . . . . . . . . .
SZR-LY2-1-AC110-120V . . . . . . . . . .
21
21
21
21
22
22
21
21
21
21
22
22
22
22
162
162
162
162
162
162
162
162
162
161
161
161
161
161
161
161
161
161
161
161
161
161
161
161
161
11
11
12
12
13
13
13
12
76
INDEX
SZR-LY2-1-AC220V . . . . . . . . . . . . .
SZR-LY2-1-DC12V . . . . . . . . . . . . . .
SZR-LY2-1-DC24V . . . . . . . . . . . . . .
SZR-LY2-1P-AC110-120V . . . . . . . . .
SZR-LY2-1P-DC24V . . . . . . . . . . . . .
SZR-LY2-D1-DC24V . . . . . . . . . . . . .
SZR-LY2-N1-AC110-120V . . . . . . . . .
SZR-LY2-N1-AC220V . . . . . . . . . . . .
SZR-LY2-N1-DC12V . . . . . . . . . . . . .
SZR-LY2-N1-DC24V . . . . . . . . . . . . .
SZR-LY2-X1-DC24V . . . . . . . . . . . . .
SZR-LY4-1-AC110-120V . . . . . . . . . .
SZR-LY4-1-AC220V . . . . . . . . . . . . .
SZR-LY4-1-DC12V . . . . . . . . . . . . . .
SZR-LY4-1-DC24V . . . . . . . . . . . . . .
SZR-LY4-1P-AC110-120V . . . . . . . . .
SZR-LY4-1P-AC220V-240V . . . . . . .
SZR-LY4-1P-DC24V . . . . . . . . . . . . .
SZR-LY4-D1-DC24V . . . . . . . . . . . . .
SZR-LY4-N1-AC110-120V . . . . . . . . .
SZR-LY4-N1-AC220V . . . . . . . . . . . .
SZR-LY4-N1-DC12V . . . . . . . . . . . . .
SZR-LY4-N1-DC24V . . . . . . . . . . . . .
SZR-LY4-X1-DC24V . . . . . . . . . . . . .
SZR-MY2-1-AC110-120V . . . . . . . . .
SZR-MY2-1-AC220V . . . . . . . . . . . . .
SZR-MY2-1-DC12V . . . . . . . . . . . . . .
SZR-MY2-1-DC24V . . . . . . . . . . . . . .
SZR-MY2-1P-AC110-120V . . . . . . . .
SZR-MY2-1P-AC220V-240V . . . . . . .
SZR-MY2-1P-DC24V . . . . . . . . . . . . .
SZR-MY2-D1-DC24V . . . . . . . . . . . . .
SZR-MY2-N1-AC110-120V . . . . . . . .
SZR-MY2-N1-AC220V . . . . . . . . . . . .
SZR-MY2-N1-DC12V . . . . . . . . . . . . .
SZR-MY2-N1-DC24V . . . . . . . . . . . . .
SZR-MY2-X1-DC24V . . . . . . . . . . . . .
SZR-MY4-1-AC110-120V . . . . . . . . .
SZR-MY4-1-AC220V . . . . . . . . . . . . .
SZR-MY4-1-DC12V . . . . . . . . . . . . . .
SZR-MY4-1-DC24V . . . . . . . . . . . . . .
SZR-MY4-1P-AC110-120V . . . . . . . .
SZR-MY4-1P-AC220V-240V . . . . . . .
SZR-MY4-1P-DC24V . . . . . . . . . . . . .
SZR-MY4-D1-DC24V . . . . . . . . . . . . .
SZR-MY4-N1-AC110-120V . . . . . . . .
SZR-MY4-N1-AC220V . . . . . . . . . . . .
SZR-MY4-N1-DC12V . . . . . . . . . . . . .
SZR-MY4-N1-DC24V . . . . . . . . . . . . .
SZR-MY4-X1-DC24V . . . . . . . . . . . . .
SZX-SLF-08N . . . . . . . . . . . . . . . . . .
SZX-SLF-14 . . . . . . . . . . . . . . . . . . . .
SZX-SMF-08N . . . . . . . . . . . . . . . . . .
SZX-SMF-14N . . . . . . . . . . . . . . . . . .
76
76
76
76
76
76
76
76
76
76
76
77
77
77
77
77
77
77
77
77
77
77
77
77
74
74
74
74
74
74
74
74
74
74
74
74
74
75
75
75
75
75
75
75
75
75
75
75
75
75
78
78
78
78
V
V7-1A17D8 . . . . . . . . . . . . . . . . . . .
V7-1A17D8-022 . . . . . . . . . . . . . . .
V7-1A17P02 . . . . . . . . . . . . . . . . . .
V7-1B10E9-207 . . . . . . . . . . . . . . . .
V7-1B17D8 . . . . . . . . . . . . . . . . . . .
V7-1B17D8-048 . . . . . . . . . . . . . . .
V7-1B17D8-263 . . . . . . . . . . . . . . .
V7-1B19D8-022 . . . . . . . . . . . . . . .
V7-1B19E9 . . . . . . . . . . . . . . . . . . .
V7-1C17D8 . . . . . . . . . . . . . . . . . . .
V7-1C17D8-002 . . . . . . . . . . . . . . .
V7-1C17D8-022 . . . . . . . . . . . . . . .
V7-1C17D8-048 . . . . . . . . . . . . . . .
V7-1C17D8-201 . . . . . . . . . . . . . . .
V7-1C17D8-207 . . . . . . . . . . . . . . .
V7-1C17D8-263 . . . . . . . . . . . . . . .
V7-1C17E9 . . . . . . . . . . . . . . . . . . .
V7-1C17E9-002 . . . . . . . . . . . . . . . .
V7-1C17E9-201 . . . . . . . . . . . . . . . .
V7-1C17E9-207 . . . . . . . . . . . . . . . .
V7-1D10D8 . . . . . . . . . . . . . . . . . . .
V7-1S17D8 . . . . . . . . . . . . . . . . . . .
V7-1S17D8-022 . . . . . . . . . . . . . . .
V7-1S17D8-201 . . . . . . . . . . . . . . .
V7-1S17D8-207 . . . . . . . . . . . . . . .
V7-1S17D8-263 . . . . . . . . . . . . . . .
V7-1V19E9 . . . . . . . . . . . . . . . . . . .
V7-1V19E9-048 . . . . . . . . . . . . . . . .
V7-1V19E9-207 . . . . . . . . . . . . . . . .
V7-1Z19E9 . . . . . . . . . . . . . . . . . . .
V7-2B17D8-201 . . . . . . . . . . . . . . .
V7-2B17E9-002 . . . . . . . . . . . . . . . .
V7-2B19E9-048 . . . . . . . . . . . . . . . .
V7-3S17D8-048 . . . . . . . . . . . . . . .
V7-3S17E9-263 . . . . . . . . . . . . . . . .
V7-7D17D8-207 . . . . . . . . . . . . . . .
V7-9W1AE9-048 . . . . . . . . . . . . . . .
Vehicle Controls . . . . . . . . . . . . . . .
Hour Meters . . . . . . . . . . . . . . . . . .
Indicator Light Strips . . . . . . . . . .
Key Switches . . . . . . . . . . . . . . . .
Lighting Products . . . . . . . . . . . . .
Multi-function Controls . . . . . . . .
Other Vehicle Controls . . . . . . . . . .
Proportional Retarders . . . . . . . . .
Push/Pull Switches . . . . . . . . . . .
Shifters . . . . . . . . . . . . . . . . . . . .
Throttle Controls . . . . . . . . . . . . .
Turn Signals . . . . . . . . . . . . . . . . .
110
111
110
111
110
111
111
111
110
110
111
111
111
111
111
111
110
111
111
111
110
110
111
111
111
111
110
111
111
110
111
111
111
111
111
111
111
175
176
175
184
189
175
194
187
185
186
175
188
ZM50E10E01 . . . . . . . . . . . . . . . . . .
ZM50E70A01 . . . . . . . . . . . . . . . . . .
ZM50E70D01 . . . . . . . . . . . . . . . . . .
ZM50E70E01 . . . . . . . . . . . . . . . . . .
ZM90G20A01 . . . . . . . . . . . . . . . . .
ZV10B70A01 . . . . . . . . . . . . . . . . . .
ZV50E10A01 . . . . . . . . . . . . . . . . . .
ZV50E10B01 . . . . . . . . . . . . . . . . . .
ZV50E20A01 . . . . . . . . . . . . . . . . . .
ZV50E20F01 . . . . . . . . . . . . . . . . . .
ZV50E70C01 . . . . . . . . . . . . . . . . . .
ZV50E70F01 . . . . . . . . . . . . . . . . . .
ZW10E15CD1 . . . . . . . . . . . . . . . . .
ZW10E90FW1 . . . . . . . . . . . . . . . . .
ZW50F15AD1 . . . . . . . . . . . . . . . . .
ZX10C10A01 . . . . . . . . . . . . . . . . . .
ZX40E10C01 . . . . . . . . . . . . . . . . . .
ZX40E10E01 . . . . . . . . . . . . . . . . . .
ZX40E30A01 . . . . . . . . . . . . . . . . . .
ZX40E30C01 . . . . . . . . . . . . . . . . . .
ZX40E30E01 . . . . . . . . . . . . . . . . . .
108
107
108
108
107
108
108
109
108
109
109
109
109
109
109
107
107
108
107
107
108
Z
ZM10B10A01 . . . . . . . . . . . . . . . . . 107
ZM50E10A01 . . . . . . . . . . . . . . . . . . 107
ZM50E10D01 . . . . . . . . . . . . . . . . . . 108
www.honeywell.com/sensing
209
SALES AND SERVICE
Sales and Service
Honeywell serves its customers through a worldwide network of sales offices,
representatives and distributors. For application assistance, current
specifications, pricing or name of the nearest Authorised Distributor or Sales
Representative, contact your local sales office or:
INTERNET: www.honeywell.com/sensing
E-mail: info.sc@honeywell.com
ASIA PACIFIC
EUROPE
Control Products
Asia Pacific Headquarters
Phone: +(65) 6355-2828
FAX: +(65) 6445-3033
South Korea
Honeywell Korea Co Ltd
Phone: +(822) 799-6167
FAX: +(822) 792-9013
Australia
Honeywell Limited
Phone: +(61) 2-9370-4500
FAX: +(61) 2-9370-4525
Toll Free 1300-36-39-36
Toll Free Fax: 1300-36-0470
Malaysia
Honeywell Engineering Sdn
Bhd
Phone: +(60-3) 7958-4988
FAX: +(60-3) 7958-8922
China – PRC - Beijing
Honeywell China Inc.
Phone: +(86-10) 8458-3280
FAX: +(86-10) 8458-3102
China – PRC - Shanghai
Honeywell China Inc.
Phone: (86-21) 6237-0237
FAX: (86-21) 6237-1237
China - Hong Kong S.A.R.
Honeywell Ltd.
Phone: +(852) 2953-6412
FAX: +(852) 2953-6767
Indonesia
Honeywell Indonesia Pte Ltd.
Phone: +(62) 21-535-8833
FAX: +(62) 21-5367 1008
India
TATA Honeywell Ltd.
Phone: +(91) 20 6870 445/
446
FAX: +(91) 20 681 2243/ 687
5992
Japan
Honeywell Inc
Phone: +(81) 3 5440 1425
FAX: +(81) 3 5440 1368
New Zealand
Honeywell Limited
Phone: +(64-9) 623-5050
FAX: +(64-9) 623-5060
Toll Free (0800) 202-088
Philippines
Honeywell Systems
(Philippines) Inc.
Phone: +(63-2) 636-1661 /
1662
FAX: +(63-2) 638-4013
Singapore
Honeywell South East Asia
Phone: +(65) 6355-2828
FAX: +(65) 6445-3033
Thailand
Honeywell Systems
(Thailand) Ltd.
Phone: +(662) 693-3099
FAX: +(662) 693-3085
Taiwan R.O.C.
Honeywell Taiwan Ltd.
Phone: +(886-2) 2245-1000
FAX: +(886-2) 2245-3241
Austria
Honeywell Austria GmbH
Phone: +(43) 1 727 80 366/
246
FAX: +(43) 1 727 80 337
Belgium
Honeywell SA/NV
Phone: +(32) 2 728 2522
FAX: +(32) 2 728 2502
Bulgaria
Honeywell EOOD
Phone: +(359) 2 979 00 23
FAX: +(359) 2 979 00 24
Czech Republic
Honeywell spol. s.r.o.
Phone: +(420) 242 442 111
FAX: +(420) 242 442 182
Denmark
Honeywell A/S
Phone: +(45) 39 55 55 55
FAX: +(45) 39 55 55 58
Finland
Honeywell OY
Phone: +(358) 9 3480101
FAX: +(358) 9 34801375
France
Honeywell SA
Phone: +(33) 1 60 19 80 40
FAX: +(33) 1 60 19 81 73
Germany
Honeywell AG
Phone: +(49) 69 8064 444
FAX: +(49) 69 8064 442
Hungary
Honeywell Kft.
Phone: +(361) 451 43 00
FAX: +(361) 451 43 43
Italy
Honeywell S.p.A.
Phone: +(39) 02 92146 450/
456
FAX: +(39) 02 92146 490
The Netherlands
Honeywell B.V.
Phone: +(31) 20 565 69 11
FAX: +(31) 20 565 66 00
Norway
Honeywell A/S
Phone: +(47) 66 76 20 00
FAX: +(47) 66 76 20 90
Poland
Honeywell Sp. zo.o
Phone: +(48) 606 09 64
FAX: +(48) 606 09 01
210
Portugal
Honeywell Portugal Lda
Phone: +(351 21) 424 50 00
FAX: +(351 21) 424 50 99
Romania
Honeywell Bucharest
Phone: +(40) 21 231 64 37/
38
FAX: +(40) 21 231 6439
Commonwealth of
Independent States (CIS)
Z.A.O. Honeywell
Phone: +(7 095) 796 98 36
FAX: +(7 095) 797 99 06
Slovak Republic
Honeywell s.r.o.
Phone: +(421 2) 58 247 403
FAX: +(421 2) 58 247 415
South Africa (Republic of)
Honeywell Southern Africa
Honeywell S.A. Pty. Ltd
Phone: +(27) 11 695 8000
FAX +(27) 11 805 1504
Spain
Honeywell S.A.
Phone: +(34) 91 313 6100
FAX: +(34) 91 313 6129
Sweden
Honeywell AB
Phone: +(46) 8 775 55 00
FAX: +(46) 8 775 56 00
Switzerland
Honeywell AG
Phone: +(41) 1 855 24 40
FAX: +(41) 1 855 24 45
Turkey
Honeywell Turkey A.S.
Phone: +(90) 216 5756620
FAX: +(90) 216 5756637
Ukraine
Honeywell
Phone: +(380) 44 201 44 74
FAX: +(380) 44 201 44 75
United Kingdom
Honeywell Control Systems
Ltd
Phone: +(44) 1698 481481
FAX: +(44) 1698 481676
Mediterranean & African
Distributors
Honeywell SpA
Phone: +(39) 2 921 46 232
FAX: +(39) 2 921 46 233
Middle East Headquarters
Honeywell Middle East Ltd.
Phone: +(9712) 443 2119
FAX +(9712) 443 2536
www.honeywell.com/sensing
NORTH AMERICA
LATIN AMERICA
USA/Canada
Honeywell
Sensing and Control
Phone: 1-800-537-6945
1-815-235-6847
FAX: 1-815-235-6545
E-mail:
info.sc@honeywell.com
Honeywell Latin America
Headquarters
Phone: 1-305-805-8188
FAX: 1-305-883-8257
Argentina
Honeywell S.A.I.C.
Phone: +(54-11) 4383-3627
FAX: +(54-11) 4325-6470
Brazil
Honeywell Do Brasil & Cia
Phone: +(55-11) 4166-1900
FAX: +(55-11) 4166-1901
Chile
Honeywell Chile, S.A.
Phone: +(56-2) 425-8400
FAX: +(56-2) 425-8410
Mexico
Honeywell S.A. de C.V.
Phone: +(52) 55 5081-0200
FAX: +(52) 55 5081-0202
Puerto Rico, Caribbean
Honeywell Inc.
Phone: +(787) 792-7075
FAX: +(787) 792-0053
Venezuela
Honeywell C.A.
Phone: +(58-212) 273-0511
FAX: +(58-212) 273-0599
Warranty/Remedy
While we provide application assistance personally, through
Honeywell warrants goods of its manufacture as being free of
our literature and the Honeywell web site, it is up to the
defective materials and faulty workmanship. Honeywell's
customer to determine the suitability of the product in the
standard product warranty applies unless agreed to otherwise
application.
by Honeywell in writing; please refer to your order
acknowledgement or consult your local sales office for
Specifications may change without notice. The information we
specific warranty details. If warranted goods are returned to
supply is believed to be accurate and reliable as of this
Honeywell during the period of coverage, Honeywell will
printing. However, we assume no responsibility for its use.
repair or replace, at its option, without charge those items it
egoing is buyer's sole rremedy
emedy and
finds defective. The for
foregoing
is in lieu of all other war
ranties, expr
essed or implied,
warranties,
expressed
including those of mer
chantability and fitness for a
merchantability
par
ticular purpose. In no event shall Honeywell be liable
particular
for consequential, special, or indir
ect damages.
indirect
Automation and Control Solutions
Sensing and Control
Honeywell
1985 Douglas Drive North
Minneapolis, MN 55422
www.honeywell.com
000640-1-EN IL50 GLO
July 2006
Copyright © 2006 Honeywell International Inc. All rights reserved.
工商网监
湘ICP备2023018690号
