HONEYWELL
See full Datasheet below...
BUY NOW
BUY NOW
masterelectronics.com & onlinecomponents.com
are authorized e-commerce distributors
of electronic components.
MICRO SWITCH™
Compact Precision Limit Switches
914CE Series
Datasheet
MICRO SWITCH™ 914CE Series
Compact Precision Limit Switches
All MICRO SWITCH™ 914CE Series compact enclosed switches incorporate fluorocarbon diaphragm sealing to
provide reliable protection, meeting NEMA 1, 2, 3, 3R, 4, 6, 6P, and 13 as well as IP66, IP67, and IP68 requirements.
Versions with boot seal also meet NEMA 12 requirements (dust, falling dirt, liquid media with solid contaminates). The
cable or connector and basic switch terminals are encapsulated in an epoxy sealant, offering excellent resistance in
harsh environments. For low temperature applications (down to -40 °C, -40 °F), CE Series switches can be supplied
with low temperature seals and lubricant.
The CE Series switches are rugged and versatile switches which can be applied indoors in many harsh factory floor
applications, as well as on outdoor equipment in extreme temperatures. A full range of actuators are available, including plain plungers, roller plungers, side rotary, multi-directional wire, and manually operated. The switches are also
available with the industry standard, M12 micro-change 4-pin connector. MICRO SWITCH™ 914CE products meet
North American, cURus standards, as well as European CE requirements.
What makes our switches better?
Compact construction for minimal real estate on equipment
Gang mounting capability to provide a multi-plunger
limit switch
Rugged, die-cast zinc housing for many demanding environments
Variety of cable length options and choice of side or bottom exit
cable/connector for design flexibility
Functionality over a wide temperature range with factory sealed
connectors or wiring
Big performance in a little package.
CUSTOMIZATION • COMPACT
HIGH PERFORMING • DURABILITY
2
sensing.honeywell.com
Features
and Benefits
RUGGED, COMPACT CONSTRUCTION
MICRO SWITCH™ 914CE Series limit switches’ compact construction means
minimal real estate on equipment. Delivers consistent performance in many
demanding environments where petroleum, synthetic or water based fluids are
present. Its die-cast zinc housing and fluorocarbon diaphragm maintain a tightly
sealed, NEMA 1, 2, 3, 3R, 4, 6, 6P, 12 (boot seal), and 13 IP66/67/68
rugged package.
Gang-mounting option
CUSTOMIZATION
Switches are pre-leaded (UL cable) or supplied with a M12 four-pin connector
to decrease installation time. 914CE Series’ wide selection of actuators minimize
installation or time issues. Cable length variations for equipment requiring
different cable lengths with side and bottom exit cable/connector options for
equipment flexibility.
COMPACT DESIGN
Rugged, compact switch with a 25 mm hole-hole mounting footprint.
Engineered with a MICRO SWITCH™ SM switch for consistent, precise
actuation.
High performance switch for small spaces
LONG LIFE
Well suited for up to 10 million actuation cycles. (Up to 5 million actuation cycles
for wobble actuators)
DESIGN FLEXIBILITY
Gang mounting capability to provide a multi-plunger limit switch. Low
temperature variants available for indoor and outdoor applications.
GLOBAL APPLICATIONS
cURus, CE approvals for world-wide use.
sensing.honeywell.com
3
Potential Applications
MACHINE TOOLS
Detects tool and piece part location on CNC and other machining equipment
OFF-ROAD EQUIPMENT
Used as a cab door switch on crane booms
MATERIAL HANDLING
Used in dock locks for trucks and trailers, and vehicle wash systems
ACCESS AND MOBILITY SOLUTIONS
Often used on vehicle wheelchair lifts and stairway lifts
TEXTILE MACHINERY
Senses roll size, tensioning, and other functions
ROBOTICS
Controls arm movement limits
PACKAGING EQUIPMENT
Often used on stretch pallet wrapping equipment
COMMERCIAL APPLIANCES
Functions as a door switch
PRINT TRADE MACHINERY
Senses roll size, tensioning, along with controlling gates and panels
AGRICULTURAL MACHINERY
Used on grain and livestock equipment
4
sensing.honeywell.com
MICRO SWITCH™ Compact Precision Limit Switches
Table 1. Specifications
Characteristic
Parameter
Description
compact enclosed limit switch
• Top pin plunger (914CE1-)
• Parallel roller plunger (914CE2-)
• Cross roller plunger (914CE3-)
• Front rotary (914CE16-)
• Top pin plunger with boot seal (914CE18-)
• Top adjustable plunger (914CE19-)
• Wobble (914CE20-)
• Manually operated (914CE22-)
• Top pin plunger, panel mount (914CE27-)
• Ball bearing plunger (914CE66-)
• Top roller plunger, parallel and panel mount (914CE28-)
• Top roller plunger, perpendicular, panel mount (914CE29-)
• Top roller plunger, parallel & boot sealed (914CE31-)
• Top roller plunger, perpendicular, boot seal (914CE55-)
Actuators
SJTO 4 x 0,75 mm2 (18 AWG) cable
Connector (dc), 4-pin male, M12 thread (-Q), (-Q2) Revised pin-out, see page 6
Connector (ac), 4-pin male, 1/2 in x 20 thread (-Q1)
Terminations
Switching options
SPDT, snap action contacts (1NC/1NO)
IP66, IP67, IP68 (depending upon model)
NEMA 1, 2, 3, 3R, 4, 6, 6P, 12 (boot seal), 13
Sealing
0 °C to 105 °C [32 °F to 221 °F] optional -40 °C to 105 °C [-40 °F to 221°F]
Rotary: -40° C to 100 °C [-40 °F to 212 °F]
Operating temperature
Mechanical life
up to 10 million (up to 5 million for wobbles)
Thermal current
1 A, 3 A, 5 A (depending upon model)
Rated Insulation voltage (Ui)
250 V
Rated impulse withstand voltage (Uimp)
1.5 kV
Pollution degree
3
Min. actuation speed
0.003 m/s
Max. actuation speed
0.1 m/s
Max. actuation frequency
ac – 200 Hz; dc – 20 Hz
Shock
50 g – IEC68-2-27
Vibration
10 G – IEC68-2-6
Approvals
cURus, CE
IEC947-5-1, EN 60947-5-1; AC14 D300, DC13 R300
UL recognized to US and Canadian Requirements
Conforming to standards
Table 2. Electrical Ratings (in amperes)
Model example
914CE* - *
914CE* - *G
914CE* -Q, -AQ, -AQ1, -Q2
Rating code
A
Contacts
Silver contacts
Gold contacts
Silver contacts
Rating
A
B
C with 4-pin connector
Electrical rating
cURus,
CE
Make
Break
240 Vac, ind.
1.2
0.2
240 Vac, res.
5
5
28 Vdc, res.
3
3
28 Vdc, ind.
3
3
5 A, 1/10 HP, 125 Vac or 250 Vac
–
–
–
–
–
–
B
cURus, CE
1 A res., 0.5 A ind., 30 Vdc
1 A, 125 Vac
C
cURus, CE
3 A, 125 Vac or 250 Vac
sensing.honeywell.com
5
914CE Series
SWITCHING AND LEAD IDENTIFICATION
914CE
GREEN
SPDT
RED
2
BLACK
1
3
WHITE
2
3
1
PINOUTS
Connector - (dc) (-Q)
Connector (dc) (-Q2)
2
NO 3
2
1
3
Connector (ac) (-Q1)
3
1
1C
NC
CONNECTOR
VERSIONS
NO 3
MOUNTING
The 914CE Series is available with a 4-pin, M12 size connector in
MICRO SWITCH™ 914CE Series switches are mounted by using
both bottom and side exit versions.
two M5 or #10 screws. The mounting holes are counter bored to
1C
NC
-Q, -Q2 Versions
Q1 Version
keep the screw heads within the overall switch housing dimensions.
8.0
15
GANG MOUNT CAPABILITY
The housing on the 914CE Series has been designed to enable
15
connector
dcBrad
typeHarrison
4 pin male
,
CAT.thread
No.80466 M12 Thread
M12
ac type, 4 pin male,
1/2 in x 20 thread
the user to build his own multiple plunger switch by gang mounting several switches. All pin plunger and roller plunger types are
OPTION Q
suitable for gang mounting. There is a 16 mm distance between
OPTION Q1
the plungers. Both series are very versatile that even a lever-type
version could be added at the end of the row.
BOTTOM EXIT OR SIDE EXIT ORIENTATION
The CE Series has been designed with a pre-wired cable fittied in
the bottom of the switch housing. Other variations are available
with a side exit cable.
GOLD CONTACT VERSIONS
For low energy applications (up to 30 Vdc, 1 A), gold contact versions of the 914CE switches can be supplied upon request.
6
sensing.honeywell.com
MICRO SWITCH™ Compact Precision Limit Switches
GENERAL DIMENSIONS • ALL SWITCHES
CABLE VERSION
40 mm max.
[1.57 in max.]
16 mm max.
[0.63 in max.]
25 mm
[0.98 in]
Two (2) holes Ø 5.1 mm [Ø 0.2 in] dia. c/bore
10,2 mm dia x 6 mm deep [0.40 in dia x 0.24 in deep]
(Both sides - option “A” only)
Pretravel (PT)
Overtravel (OT)
3 mm min.
[0.12 in min.]
Max. free length
Operating
position (OP)
7,6 mm
[0.30 in]
M12
thread
44 mm max.
[1.73 in max.]
SWITCH™ 914CE Miniature Limit Switch
8,0 mm
t Nomenclature
[0.31 in]
TYPE
Q OE Q2
8,0 mm
[0.32 in]
1/2 x 20 UNF
thread
TYPE
Q1
PRODUCT NOMENCLATURE
29
Switch Type
Actuator Type
914CE Series
Small Precision
Limit Switch
3
–
914CE
Connectors
Options1
Cable Length
dc type
single keyway
1
Top pin
plunger
22
Manually oper.
nylon button
3
3 feet
A
Side entry
2
Top roller
plunger, parallel
27
Top pin plunger
panel mount
6
6 feet
G
Gold
contacts
Q1
ac type
two keyways
3
Top roller
plunger, perp.
28
Top roller
plunger, parallel
panel mount
9
9 feet
P
Top
mounting
Q2
dc type
optional pin-out
16
Front
rotary
29
Top roller
plunger, perp.
panel mount
12
12 feet
L1
Low temp.
-40 °C, cable
not for flexing
18
Top pin plunger
w/ boot seal
31
Top roller
plunger, parallel
boot seal
15
15 feet
V
Vitron seals/
gasket
(front rotary only)
19
Top adjustable
pin plunger
55
Top roller
plunger, perp.
boot seal
20
Coil
wobble
66 plunger
Q
Bottom exit is
standard.
Top ball bearing
NOTE: not all combinations of model code are available.
Please contact your Honeywell provider/representative for assistance.
More than one option may be permissible.
1
sensing.honeywell.com
7
914CE Series
PRODUCT SPECIFICATIONS AND LISTINGS
Contact your Honeywell rep or distributor for additional listings
914CE1 • Pin Plunger
914CE27 • Pin Plunger Panel Mount
Ø10,0 mm
[Ø0.39 in]
PT
OT
FP
OP
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 12,2 N [2.75 in-lb]
M10 X 1 METRIC THREAD
12 mm [0.49 in]
THREADED LENGTH
OT
PT
FP
OP
914CE18 • Boot Sealed Pin Plunger
Ø7,0 mm
[Ø0.28 in]
OT
BOOT SEAL
PT
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 22,2 N [5 in-lb]
FP
OP
914CE66 • Ball Bearing Plunger
7,9 mm [0.31 in] DIA
BALL BEARING
OT
OP
8
PT
FP
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 12,2 N [2.75 in-lb]
sensing.honeywell.com
Contacts
Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
17,5 mm
[0.69 in]
15,7 mm
[0.62 in]
–
914CE1-3
Gold
B
Bottom
17,5 mm
[0.69 in]
15,7 mm
[0.62 in]
–
914CE1-3G
Silver
A
Side
17,5 mm
[0.69 in]
15,7 mm
[0.62 in]
–
914CE1-3A
Silver
A
Bottom
31,1 mm
[1.23 in]
29,3 mm
[1.15 in]
Panel mount
914CE27-3
Silver
C
Bottom
17,5 mm
[0.69 in]
15,7 mm
[0.62 in]
dc-type, single
keyway
914CE1-Q
Silver
C
Bottom
17,5 mm
[0.69 in]
15,7 mm
[0.62 in]
ac-type,
two keyways
914CE1-Q1
Contacts
Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
26,7 mm
[1.05]
24,9 mm
[0.98 in]
914CE18-3
Silver
A
Side
26,7 mm
[1.05]
24,9 mm
[0.98 in]
914CE18-3A
Silver
A
Bottom
26,7 mm
[1.05]
24,9 mm
[0.98 in]
Fluorocarbon
seals
914CE18-3V
Silver
C
Bottom
26,7 mm
[1.05]
24,9 mm
[0.98 in]
ac-type,
two keyways
914CE18-Q1
Silver
C
Side
26,7 mm
[1.05]
24,9 mm
[0.98 in]
ac-type,
two keyways
914CE18-AQ1
Contacts
Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
26,2 mm
[1.03 in]
24,4 mm
[0.96 in]
914CE66-3
MICRO SWITCH™ Compact Precision Limit Switches
914CE2 • Roller Plunger
914CE28 • Roller Plunger Panel Mount
Ø12,4 mm
[Ø0.49 in]
PT
OT
FP
OP
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 12,2 N [2.75 in-lb]
ROLLER
Ø 12,4 mm x 4,7 mm
[Ø 0.48 in x 0.020 in]
M14 X 1 THREAD
OT
Contacts
Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Silver
A
Gold
Bottom
30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
914CE2-3
B
Bottom
30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
914CE2-3G
Silver
C
Bottom
30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
ac-type, two
keyways
914CE2-Q1
Silver
C
Bottom
30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
dc-type,
single keyway
914CE2-Q
Silver
A
Side
30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
Silver
A
Bottom
44,3 mm
[1.75 in]
42,5 mm
[1.67 in]
Panel mount
914CE28-3
Silver
C
Bottom
44,3 mm
[1.75 in]
42,5 mm
[1.67 in]
Panel mount, actype, two keyways
914CE28-Q1
Contacts
Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
36,2 mm
[1.43 in]
34,4 mm
[1.36 in]
Silver
A
Bottom
36,2 mm
[1.43 in]
34,4 mm
[1.36 in]
Fluorocarbon
seals
914CE31-3V
Contacts
Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
914CE3-3
Gold
B
Bottom
30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
914CE3-3G
Silver
A
Side
30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
914CE3-3A
Silver
A
Bottom
44,3 mm
[1.75 in]
42,5 mm
[1.67 in]
Panel mount
914CE29-3
Silver
C
Bottom
30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
dc-type,
single keyway
914CE3-Q
Silver
C
Bottom
30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
ac-type,
two keyways
914CE3-Q1
PT
FP
OP
914CE31 • Boot Sealed Roller Plunger
ROLLER
Ø 12,4 mm x 4,7 mm
Ø 0.48 in x 0.020 in]
BOOT SEAL
OT
PT
FP
OP
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 22,2 N [5 in-lb]
914CE3 • Cross Roller Plunger
914CE29 • Cross Roller Panel Mount
OT
Ø12,4 mm
[Ø0.49 in]
PT
FP
OP
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 12,2 N [2.75 in-lb]
ROLLER
Ø 12,4 mm x 4,7 mm
Ø 0.48 in x 0.020 in]
M14 X 1 THREAD
OT
Options
Listing
914CE2-3A
914CE31-3
PT
OP
FP
Note: part numbers are shown with 3 ft of cable. The -X indicates the number of feet of cable provided. 6-foot, 9-foot lengths, and 12-foot lengths along
with custom lengths, are also available.
sensing.honeywell.com
9
914CE Series
914CE55 • Boot Sealed Cross Roller
Plunger
ROLLER
Ø 12,4 mm x 4,7 mm
Ø 0.48 in x 0.020 in]
BOOT SEAL
PT
OT
FP
OP
FP
PT
OT
OT
DT
DT
18,9 mm
[0.74 in]
Actuator shaft
Ø7,32 mm
[Ø0.288 in]
Pretravel • 30°
Diff. travel • 3°
Overtravel • 40°
Oper. force • 0,34 Nm [3 in-lb]
914CE22 • Manually Operated
NYLON BUTTON
Ø26,4 mm
[Ø1.04 in]
OT
PT
FP
OP
M4 CORROSION
RESISTANT SCREW AND LOCKNUT
PT
OP
1
FP
[ADJUSTABLE]
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Silver
A
Bottom
36,2 mm
[1.43 in]
34,4 mm
[1.36 in]
Contacts
Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Silver
A
Bottom
–
–
914CE16-31
Silver
A
Side
–
–
914CE16-3A1
Silver
C
Bottom
–
–
ac-type, two
keyways
914CE16-Q11
Silver
C
Bottom
–
–
dc-type,
single keyway
914CE16-Q11
Silver
C
Side
–
–
ac-type, two
keyways
914CE16-AQ11
Contacts
Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
29,2 mm
[1.15 in]
27,4 mm
[1.08]
23,9 mm [0.94 in]
dia. button
914CE22-3
Contacts
Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
Gold
B
Bottom
Silver
A
Side
Silver
C
Bottom
Adjust.
33,8 mm
to 40,8
mm
[1.33 in to
1.61 in]
Adjust.
32 mm to
39 mm
[1.26 in to
1.54 in]
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 8,9 N [2 in-lb]
914CE19 • Adjustable Plunger
OT
Elec
Rating
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 17,5 N [5 lb]
Switch operates on clockwise and counterclockwise rotation of lever shaft
10
Options
Listing
914CE55-3
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 22,2 N [5 in-lb]
914CE16 • Side Rotary
PT
Contacts
sensing.honeywell.com
Options
Listing
914CE19-3
914CE19-3G
914CE19-3A
ac-type, two
keyways
914CE19-Q1
MICRO SWITCH™ Compact Precision Limit Switches
914CE20 • Random Motion
Wire Actuator
OP
ALL DIRECTIONS
EXCEPT DIRECT
PULL
Contacts
Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Silver
A
Bottom
–
–
Silver
A
Side
–
–
914CE20-3
914CE20-3A
dc-type,
single keyway
914CE20-Q
C
Bottom
Contacts
Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
–
–
available with
9-feet of cable
only
914CE20-9N24
Oper. point • 28 mm [1.10 in] max.
Oper. force • 0,55 N [0.12 lb] max.
335,0 mm max.
[13,98 mm max.]
25 mm [1.00 in] max.
operating position in all
directions except pull
914CE20-9N24 • Random Motion
Plastic Actuator
101 mm
[3.97 in]
Listing
Silver
Ø1.8 mm
[Ø0.07 in]
Ø 5,0 mm [Ø 0.20 in]
Options
Oper. point • 25 mm [0.93 in]
max. in all directions except pull
Oper. force • 0,55 N [0.12 lb]
max.
Note: part numbers are shown with 3 ft of cable. The -X indicates the number of feet of cable provided. 6-foot, 9-foot lengths, and 12-foot lengths along with
custom lengths, are also available.
sensing.honeywell.com
11
914CE Series
This Honeywell datasheet supports the following MICRO SWITCH™ 914CE Series Limit Switch Listings
914CE1-12
914CE1-12A
914CE1-15
914CE1-15A
914CE1-3
914CE1-3A
914CE1-3AK
914CE1-3AKV
914CE1-3G
914CE1-3K
914CE1-6
914CE16-12
914CE16-18
914CE16-18V
914CE16-27
914CE16-3
914CE16-3A
914CE16-3N1
914CE16-6
914CE16-6A
914CE16-6AN14
914CE16-9
914CE16-9A
914CE1-6A
914CE16-AQ
914CE16-AQ2
914CE1-6G
914CE1-6K
914CE1-6L1
914CE16-N53
914CE16-N54
914CE16-N79
914CE16-N82
914CE16-N91
914CE16-Q
914CE16-Q1
914CE16-Q2
914CE16QV
914CE16-QV
914CE16-RH29
914CE16-VCQ1
914CE18-12
914CE18-12AL1
914CE18-15
914CE18-15A
914CE18-21A
914CE1827
914CE18-27
914CE18-3
914CE18-3A
914CE18-3AL1
914CE18-6
914CE18-6A
914CE18-9
914CE18-9A
914CE18-9AGL1
914CE18-9AL1
914CE18-9V
914CE18-AQ
914CE18-AQ1
12
914CE18-GQ
914CE18-Q
914CE18-Q1
914CE1-9
914CE19-12
914CE19-3
914CE19-6
914CE19-9
914CE19-9A
914CE1-9A
914CE1-AKQ
914CE1-AKQ1
914CE1-AQ
914CE1-AQ1
914CE1-GQ1
914CE1-KQ
914CE1-KQ1
914CE1-N94
914CE1-Q
914CE1-Q1
914CE1-Q2
914CE20-12
914CE20-12G
914CE20-12GL1
914CE20-3
914CE20-6
914CE20-9
914CE20-9L1
914CE20-N69
914CE20-N77
914CE20-Q
914CE20-Q1
914CE2-12
914CE2-12AK
914CE2-12GK
914CE2-12GKL1
914CE212GL1
914CE2-12KL1
914CE2-15
914CE2-15A
914CE2-18
914CE2-21
914CE22-12
914CE2-21N36
914CE22-3
914CE2-24K
914CE22-6
914CE2-27
914CE22-9
914CE2-3
914CE2-33
914CE2-33AK
914CE2-33K
914CE2-33N37
914CE2-3A
914CE2-3AK
914CE2-3AL1
914CE2-3G
914CE2-3K
914CE2-3KL1
sensing.honeywell.com
914CE2-3KV
914CE2-3L1
914CE2-6
914CE2-6A
914CE2-6AK
914CE2-6-C
914CE2-6G
914CE2-6K
914CE2-6KV
914CE27-12
914CE27-3
914CE27-6
914CE27-9
914CE27-AGQ1
914CE27-GQ1
914CE27-Q
914CE28-12
914CE28-18
914CE28-3
914CE28-6
914CE28-9
914CE28-Q
914CE28-Q1
914CE2-9
914CE29-3
914CE29-6
914CE299
914CE29-9
914CE29-9L1
914CE2-9A
914CE2-9AK
914CE2-9AL1
914CE2-9C
914CE2-9G
914CE2-9K
914CE2-9KL1
914CE2-9L1
914CE29Q
914CE2-9Q
914CE29-Q
914CE2-AGQ
914CE2-AKLQ
914CE2-AKQV
914CE2-AQ
914CE2-AQ1
914CE2-KQ
914CE2-KQ1
914CE2-KQV
914CE2-N47
914CE2-N49
914CE2-N50
914CE2-N51
914CE2-N55
914CE2-N57
914CE2-N58
914CE2-N59
914CE2N67
914CE2-N67
914CE2-N71
914CE2-N81
914CE2-N83
914CE2-N85
914CE2-N86
914CE2-N87
914CE2-N88
914CE2-N89
914CE2-N92
914CE2-N95
914CE2-N96
914CE2-Q
914CE2-Q1
914CE2-Q2
914CE31-12
914CE31-12A
914CE31-12AV
914CE31-18
914CE3-12
914CE3-12AK
914CE3-12K
914CE31-3
914CE31-3A
914CE31-3C
914CE31-3L1
914CE31-3V
914CE31-6
914CE31-9AL1
914CE31-9L1
914CE31-9V
914CE31-AQ
914CE31-N52
914CE31-RH09
914CE3-3
914CE3-3A
914CE3-3AK
914CE3-3AL1
914CE3-3G
914CE3-3K
914CE3-3KL1
914CE3-3L1
914CE3-6
914CE3-6A
914CE3-6AK
914CE3-6G
914CE3-6K
914CE3-9
914CE3-9AK
914CE3-9G
914CE3-9K
914CE3-9L1
914CE3-9V
914CE3-AKQ
914CE3-AQ
914CE3-KQ
914CE3-KQ1
914CE3-N93
914CE3-Q
914CE3-Q1
914CE55-12
914CE55-3
914CE553A
914CE55-3A
914CE55-3AG
914CE66-12
914CE66-3
914CE66-6
914CE66-9
MICRO SWITCH™ Compact Precision Limit Switches
ADDITIONAL INFORMATION
The following associated literature is available on the Web at
sensing.honeywell.com:
• Product installation instructions
• Product range guide
• Product nomenclature tree
• Product application-specific information
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
– Limit and enclosed switches application information
WARNING
– Limit and enclosed switches operating characteristics
– Limit and enclosed switches reference standards
MISUSE OF DOCUMENTATION
– Limit and enclosed switches typical applications
•
– Product flyer: CE Family Miniature Limit Switches
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s standard
product warranty applies unless agreed to otherwise by Honeywell
in writing; please refer to your order acknowledgement or consult
your local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge those
items it finds defective. The foregoing is buyer’s sole remedy
and is in lieu of all other warranties, expressed or implied,
including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell website, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
sensing.honeywell.com
13
Find out more
Honeywell serves its customers
through a worldwide network
of sales offices, representatives
and distributors. For application
assistance, current specifications,
pricing or name of the nearest
Authorized Distributor, contact
your local sales office.
To learn more about Honeywell’s
sensing and control products,
call +1-815-235-6847 or
1-800-537-6945,
visit sensing.honeywell.com,
or e-mail inquiries to
info.sc@honeywell.com
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
honeywell.com
002381-3-EN IL50 GLO
December 2013
Copyright © 2013 Honeywell International Inc. All rights reserved.